green wrote:
Sthu Deus wrote at 2010-04-23 06:47 -0500:
I have troubles with connecting cellar phone Samsung C3010 to Debian 5 desktop.
I have put into chatscript the correct for the manufacturer initialization
line, but it still does not work.
I can't help you with chatscripts, but I have
Good day.
I have troubles with connecting cellar phone Samsung C3010 to Debian 5 desktop.
I have put into chatscript the correct for the manufacturer initialization
line, but it still does not work.
In chatcript I have:
ABORT BUSY ABORT 'NO CARRIER' ABORT VOICE ABORT 'NO DIALTONE' ABORT 'NO
Sthu Deus wrote at 2010-04-23 06:47 -0500:
I have troubles with connecting cellar phone Samsung C3010 to Debian 5
desktop.
I have put into chatscript the correct for the manufacturer initialization
line, but it still does not work.
I can't help you with chatscripts, but I have found that I
On Tue, Sep 22, 2009 at 8:38 AM, Vinicius Massuchetto
viniciusan...@gmail.com wrote:
On Mon, Sep 21, 2009 at 11:35 PM, Celejar cele...@gmail.com wrote:
On Mon, 21 Sep 2009 23:18:50 -0300
Vinícius Massuchetto viniciusan...@gmail.com wrote:
Celejar escreveu:
[...]
$ lspci | grep Wireless
[back on list]
On Tue, 22 Sep 2009 08:38:06 -0300
Vinicius Massuchetto viniciusan...@gmail.com wrote:
On Mon, Sep 21, 2009 at 11:35 PM, Celejar cele...@gmail.com wrote:
...
This page claims that iwlwifi (iwl3945) can't do AP:
http://linuxwireless.org/en/users/Drivers
How pity.
Is that
trying:
DHCPDISCOVER on ath0 to 255.255.255.255 port 67
interval x
I'm not sure that I understand exactly what you're trying to do here.
If you want the box in question to serve as a wireless AP / router
(i.e., the ppp connection is from the box, and clients connect
wirelessly to the box
., the ppp connection is from the box, and clients connect
wirelessly to the box)
That's exactly it. I've got a 3G modem connected to the box, and I
want other computers to get this connection wirelessly.
I followed this tutorial to get this configuration:
http://wiki.archlinux.org/index.php
On Mon, 21 Sep 2009 15:28:06 -0300
Vinicius Massuchetto viniciusan...@gmail.com wrote:
...
That's exactly it. I've got a 3G modem connected to the box, and I
want other computers to get this connection wirelessly.
I followed this tutorial to get this configuration:
Celejar escreveu:
[...]
You'd normally use 'master' / hostapd where the wireless clients are
connecting to the box. I've never used ad-hoc mode, and I don't know
anything about it.
I've been trying to set it to master mode, but I'm
starting to think that this card doesn't support
it. How
On Mon, 21 Sep 2009 23:18:50 -0300
Vinícius Massuchetto viniciusan...@gmail.com wrote:
Celejar escreveu:
[...]
You'd normally use 'master' / hostapd where the wireless clients are
connecting to the box. I've never used ad-hoc mode, and I don't
know anything about it.
I've been
Dear all.
I've been trying to serve a ppp0 internet
connection through a wireless network. I made a
small script to be ran when i want to do that:
ifdown wlan0
iwconfig wlan0 essid VinaNET mode Ad-Hoc
ifconfig wlan0 192.168.0.254
echo 1 /proc/sys/net/ipv4/ip_forward
/etc/init.d/dnsmasq stop
Oh Sorry... I forgot to mention an important info.
Here's my dnsmasq.conf file:
domain-needed
bogus-priv
interface=wlan0
dhcp-range=192.168.0.1,192.169.0.100,12h
Thanks again.
--
Vinícius André Massuchetto
http://vinicius.soylocoporti.org.br
Vinícius Massuchetto escreveu:
Dear all.
I've
Raj Kiran Grandhi wrote:
Daniel B. wrote:
Can dhcpd be configured to pass on (to DHCP clients on a local,
private (NATted) network) the DHCP server machine's current domain
name server addresses (given to the machine by PPP (etc.))?
What happens when your server's current name server changes
Can dhcpd be configured to pass on (to DHCP clients on a local,
private (NATted) network) the DHCP server machine's current domain
name server addresses (given to the machine by PPP (etc.))?
I see how to hard-code name servers in /etc/dhcpd.conf with the
domain-name-servers statement.
However,
Daniel B. wrote:
Can dhcpd be configured to pass on (to DHCP clients on a local,
private (NATted) network) the DHCP server machine's current domain
name server addresses (given to the machine by PPP (etc.))?
What happens when your server's current name server changes before the
DHCP lease
Hello Tyson,
Am 2006-01-06 16:05:45, schrieb Tyson Varosyan:
* lsmod outfile.txt
Ok, how do I get my outfile to a floppy?
0) Because Windows is stupid:
unix2dos -b outfile.txt
which converts the CR/LF
1) Insert Floppy
2) mount
Hello Tyson,
Am 2006-01-06 13:56:10, schrieb Tyson Varosyan:
I have ppp0 listed with a valid IP address (I can ping it from the
outside), Link encap:Point-to-Point Protocol Inet addr:70.218.54.229 P-t-P
66.174.26.4 Mask 255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICASE
MTU:0 Metric:1
Those whom have followed previous threads learned that for whatever reason,
when I dial-up using pppd or wvdial, I have an MTU of 0 automatically
assigned. This caused all kinds of fun issues. What I have been doing is
manually changing it after I connect via
ifconfig ppp0 mtu 1500
This stands
Tyson Varosyan writes:
...when I dial-up using pppd or wvdial...
It isn't pppd or wvdial. Wvdial is a pppd configurator.
Apparently every time a connection is made, the MTU is reset.
Edit /etc/ppp/options. You should find a line reading '#mtu n'.
If the line reads 'mtu 0' you've found your
206-715-TECH (8324)
UpTime/OnTime/AnyTime
-Original Message-
From: John Hasler [mailto:[EMAIL PROTECTED]
Sent: Saturday, January 07, 2006 2:25 PM
To: debian-user@lists.debian.org
Subject: Re: How do I manually set the MTU on a PPP Connection?
Tyson Varosyan writes:
...when I dial-up
Tyson Varosyan wrote:
Also, why would my post be burred? I am unfamiliar with the way this
mailing list works but have been surprised by the low number of
responces... I do not want to SPAM the list, but I really need to get my
box online...
You posted your first message by replying to
I thought it would be prudent to repost my issue given that I figured out
why my Dynamic DNS services do not work...
I am Using Debian 2.6 Kernel and the Kyocera KPC650 PCMCIA modem card over
Verizon.
Ok, just blew away my machine completely. Set it up with ONLY the ppp
interface. The goal
On Fri, 6 Jan 2006 02:42:08 -0800
Tyson Varosyan [EMAIL PROTECTED] wrote:
snip
ln -s /dev/ttyUSB0 /dev/modem (I have to do this only once, otherwise the
dialer uses device modem which is not linked to any actual port)
this is fairly normal stuff here, and should only have to be done once.
Tyson Varosyan wrote:
I am Using Debian 2.6 Kernel
This is not very helpful. There are many 2.6 kernels, some having
multiple Debian versions.
and the Kyocera KPC650 PCMCIA modem card over
Verizon.
Have you seen this?
http://www.junxion.com/opensource/linux_highspeed_usbserial.html
@lists.debian.org
Subject: Re: TCP not working over ppp connection (WAS: 5th day using
Linux...)
On Fri, 6 Jan 2006 02:42:08 -0800
Tyson Varosyan [EMAIL PROTECTED] wrote:
snip
ln -s /dev/ttyUSB0 /dev/modem (I have to do this only once, otherwise the
dialer uses device modem which is not linked to any
:17 AM
To: debian-user@lists.debian.org
Subject: Re: TCP not working over ppp connection (WAS: 5th day using
Linux...)
Tyson Varosyan wrote:
I am Using Debian 2.6 Kernel
This is not very helpful. There are many 2.6 kernels, some having
multiple Debian versions.
and the Kyocera KPC650 PCMCIA
Sorry for the repost. I am new to the list and I was just informed by
another user that due to the way I posted my original thread, it got buried
as a reply to another thread... This is my 6th day using linux and 3 of it
have now been spent with this problem - I am about ready to pull my hair
out!
Tyson Varosyan wrote:
Hi Marty,
I an very new to Linux. What do I type in to give you more information. I
used the 180MB install disk image from debian.org and I type in linux26 at
the install prompt...
Here are some tools that may yield useful output:
kernel version: uname -a
pci
@lists.debian.org
Subject: Re: TCP not working over ppp connection (WAS: 5th day using
Linux...)
Tyson Varosyan wrote:
Hi Marty,
I an very new to Linux. What do I type in to give you more information. I
used the 180MB install disk image from debian.org and I type in linux26
at
the install prompt
PROTECTED]
Sent: Friday, January 06, 2006 12:43 PM
To: debian-user@lists.debian.org
Cc: debian-user@lists.debian.org
Subject: Re: TCP not working over ppp connection (WAS: 5th day using
Linux...)
Tyson Varosyan wrote:
Hi Marty,
I an very new to Linux. What do I type in to give you more
:51 PM
To: debian-user@lists.debian.org
Subject: Re: TCP not working over ppp connection (WAS: 5th day using
Linux...)
On Fri, 6 Jan 2006 13:56:10 -0800
Tyson Varosyan [EMAIL PROTECTED] wrote:
kernel version: uname -a
Linux debian 2.6.8-2-386 #1 Tue Aug 16 12:46:35 UTS 2005 i686 GNU/Linux
-times.com
206-715-TECH (8324)
UpTime/OnTime/AnyTime
-Original Message-
From: Andrew Sackville-West [mailto:[EMAIL PROTECTED]
Sent: Friday, January 06, 2006 2:53 PM
To: Tyson Varosyan
Subject: Re: TCP not working over ppp connection (WAS: 5th day using
Linux...)
On Fri, 6 Jan
According to Andrew Sackville-West,
On Fri, 6 Jan 2006 16:12:21 -0800
Tyson Varosyan [EMAIL PROTECTED] wrote:
Yea, I am going to keep with it. This is just so damn frustrating! How would
all TCP traffic just be blocked be default?! I do not know enough about the
OS. I just got home and I
-Original Message-
From: Tony Godshall [mailto:[EMAIL PROTECTED]
Sent: Friday, January 06, 2006 4:45 PM
To: [EMAIL PROTECTED]
Cc: Debian-User
Subject: Re: TCP not working over ppp connection (WAS: 5th day using
Linux...)
According to Andrew Sackville-West,
On Fri, 6 Jan 2006 16:12:21 -0800
Solutions LLC.
[EMAIL PROTECTED]
www.up-times.com
206-715-TECH (8324)
UpTime/OnTime/AnyTime
-Original Message-
From: Tony Godshall [mailto:[EMAIL PROTECTED]
Sent: Friday, January 06, 2006 4:45 PM
To: [EMAIL PROTECTED]
Cc: Debian-User
Subject: Re: TCP not working over ppp
Tony, I am going to google away on the MTU thing - I do not even know what
MTU is... However, please note that when I set up routing from ppp0 to eth1,
the computer connected to Eth1 is a web server and is reachable from
outside. I will test to see if the web server can pull up websites etc...
OHH HELL YEA! I think I got it to work!! Tony you are da man!! Prior to
today I had no idea what MTU is, but after googleing and then looking at my
ifconfig and seeing that my MTU was set to 0 I thought that it might be a
problem.
Doing
Ifconfig ppp0 mtu 1492 made it so that my wget is now
On Friday 06 January 2006 21:16, Tyson Varosyan wrote:
Tony, I am going to google away on the MTU thing - I do not even know
what MTU is... However, please note that when I set up routing from
ppp0 to eth1, the computer connected to Eth1 is a web server and is
reachable from outside. I will
Hello
Just use 'pump', this package config the network automatically, work
perfect for me.
Gustavo
Marty wrote:
Erdi Balint wrote:
Hi,
I want to configure my eth1 interface to use ppp to the dsl provider
on startup, so I wrote this in the /etc/network/interfaces file:
auto eth1
.
What's more this takes about a minute and it is quite annoying to wait
this extra minute on each system startup. What's strange is that what
makes the ppp connection work afterwards...
Could you help?
Thanks a lot,
Balint
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Erdi Balint wrote:
Hi,
I want to configure my eth1 interface to use ppp to the dsl provider on
startup, so I wrote this in the /etc/network/interfaces file:
auto eth1
iface eth1 inet ppp
provider dsl-provider
Here's what I use:
auto ppp0
iface ppp0 inet ppp
pre-up ip link set
Collet Brunel wrote:
Hello,
I connect to the internet through a 56K USR modem.
Whenever I connect to my ISP using wvdial, it outputs
lots of messages about the connection and one of these
displays the connection speed that was established
(something like CONNECT 50666 etc... ). However,
whenever
In article [EMAIL PROTECTED], Collet Brunel wrote:
I connect to the internet through a 56K USR modem.
Whenever I connect to my ISP using wvdial, it outputs
lots of messages about the connection and one of these
displays the connection speed that was established
(something like CONNECT 50666
Hello,
I connect to the internet through a 56K USR modem.
Whenever I connect to my ISP using wvdial, it outputs
lots of messages about the connection and one of these
displays the connection speed that was established
(something like CONNECT 50666 etc... ). However,
whenever I connect to my ISP
Scotty Fitzgerald wrote:
I had a similar problem, When I set up the machine I
had a Ethernet card that was autodetected, and the
the autodetection set up the ethernet card as the default
gateway to the internet. While your ethernet is the default
gateway the dialup won't establish itself
/msg00026.html
You could use ip-up ip-down scripts to setup/tear down routes for your
ppp connection. That would certainly beat doing it manually every time.
-davidc
Gee, I always preferred topposts, but ok,
Hi, David,
I guess I will have to boot up windows tonight (sigh) to get that URL
I had a similar problem, When I set up the machine I
had a Ethernet card that was autodetected, and the
the autodetection set up the ethernet card as the default
gateway to the internet. While your ethernet is the default
gateway the dialup won't establish itself as a gateway. Try to
remove
ip-up ip-down scripts to setup/tear down routes for your
ppp connection. That would certainly beat doing it manually every time.
-davidc
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Dear all,
I'm on Debian GNU/Linux 3.0 (Woody) and stuck in the middle:
I exec pon VOL and get a connection, but no pings do return (100% loss).
As a connection has been estblished, I guess the several config files are
okay. Therefore I've pasted the output of netstat -nr, route, and
ifconf
Hi folks,
I ran
# poff ds-provider
/usr/bin/poff: I could not find a pppd process for
provider 'ds-provider'. None stopped.
It complained. ifconfig showed broadband still
connected
If run
# poff
No printout.
ifconfig showed broadband disconnected.
Can any folk help me to understancd
Stephen Liu wrote:
Hi folks,
I ran
# poff ds-provider
ps -f -C pppd
on my not broadband :-( system, shows:
UIDPID PPID C STIME TTY TIME CMD
root 9744 1 0 06:00 ttyS100:00:00 /usr/sbin/pppd call provider
poff, which is a script, deftly picks off the provider piece
Hi Hugo,
Tks for your advice.
- snip -
/usr/bin/poff: I could not find a pppd process for
provider 'ds-provider'. None stopped.
That means pppd was not running ds-provider.
What does ps -f -C pppd show?
In my case
$ ps -f -C pppd
UIDPID PPID C STIME TTY TIME
On Wed, Sep 22, 2004 at 11:15:16PM +0800, Stephen Liu wrote:
Hi Hugo,
Tks for your advice.
- snip -
/usr/bin/poff: I could not find a pppd process for
provider 'ds-provider'. None stopped.
That means pppd was not running ds-provider.
What does ps -f -C pppd show?
Hi Stefan,
Tks for your advice.
In my case
$ ps -f -C pppd
UIDPID PPID C STIME TTY TIME
CMD
root 602 1 0 15:02 ?00:00:00
pppd
call dsl-provider
Sounds like a typo -
typo = typographical error ???
if you have dsl-provider in
your /proc,
On Thu, Sep 23, 2004 at 08:44:37AM +0800, Stephen Liu wrote:
Hi Stefan,
Tks for your advice.
In my case
$ ps -f -C pppd
UIDPID PPID C STIME TTY TIME
CMD
root 602 1 0 15:02 ?00:00:00
pppd
call dsl-provider
Sounds like a typo -
Hi Stefan,
Tks for your advice.
typo = typographical error ???
Yes.
Noted with tks
# ls /proc | grep dsl-provider
# ls /proc | grep ds-provider
# ls /proc | grep pon
# ls /proc | grep poff
Doesn't work like that. /proc is where the ps info
is stored. It is
stored in a fairly
on eth0, and am attempting to establish a PPP connection
using the modem. I remove the default route with ip route delete
prior to starting PPP. When I run pon, the output is as follows:
OK
AT+cfun=1
OK
AT+cgreg=1
OK
+CGREG: 1
AT
OK
AT+cgdcont=2,IP,proxy
OK
ATD*99***2#
CONNECTSerial connection
can't figure out: I would like to be able
to bring my ppp connection up as a regular user. As root pon brings up
the connection without problem but as regular user I get the error:
Error: only members of the 'dip' group can use this command.
So I added my regular user account to this group (as root
Hello
Bram Mertens ([EMAIL PROTECTED]) wrote:
[starting pon as a regular user]
So I added my regular user account to this group (as root)
adduser m8ram dip
grep dip /etc/group now shows:
dip:x:30:m8ram
but I still get the error mentioned earlier.
AFAIK changes to groups should take
Moin!
* Bram Mertens [EMAIL PROTECTED] [040725 11:44]:
AFAIK changes to groups should take effect immediately. Can anybody
tell me what else I should check?
No, the group changes take effect, when you logout and agein login. The
output of »id« is quite usefull in those cases.
Yours
Incoming from Bram Mertens:
However there is one thing I can't figure out: I would like to be able
to bring my ppp connection up as a regular user. As root pon brings up
the connection without problem but as regular user I get the error:
Error: only members of the 'dip' group can use
s. keeling writes:
Consider adding it to dialout as well.
Not necessary.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
Dancing Horse Hill
Elmwood, WI
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Incoming from John Hasler:
s. keeling writes:
Consider adding it to dialout as well.
Not necessary.
Good to know, thanks. What's dialout for then?
--
Any technology distinguishable from magic is insufficiently advanced.
(*) http://www.spots.ab.ca/~keeling
- -
--
To
Hello
s. keeling ([EMAIL PROTECTED]) wrote:
Incoming from John Hasler:
s. keeling writes:
Consider adding it to dialout as well.
Not necessary.
Good to know, thanks. What's dialout for then?
To access the serial ports. With that you can for example use programs
like kppp without the
s. keeling writes:
What's dialout for then?
For situations where the user needs to use a serial port directly.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
Dancing Horse Hill
Elmwood, WI
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Hello.
I'm using pppconfig and pon/poff to connect to internet using dialup. Is
there an easy way to view current connection speed??? Thanks.
==
Plese, don't send me any attachment in Micro$oft (.DOC, .PPT) format.
Read
this situation in terminal mode to see if this PPP
connection is really working. why are the browsers not accessing the web??
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
or Gnome.
How can I test this situation in terminal mode to see if this PPP
connection is really working. why are the browsers not accessing the web??
ping -c 2 64.233.167.104
ping -c 2 www.google.com
If the latter says something like unknown host or cannot resolve
www.google.com, you've a dns
, the modem lights all go on and seem to be
functioning properly, the data transmit lights seem to send the the data
necessary to logon but browsers don't work in KDE or Gnome.
How can I test this situation in terminal mode to see if this PPP
connection is really working. why are the browsers
but browsers don't work in KDE or Gnome.
How can I test this situation in terminal mode to see if this PPP
connection is really working. why are the browsers not accessing the web??
ping -c 2 64.233.167.104
ping -c 2 www.google.com
If the latter says something like unknown host or cannot
Incoming from Phil:
At 01:21 PM 4/14/04 -0600, you wrote:
Incoming from Phil:
I've created a dial-in connection to my ISP, I pon and get BSD
compression
messages and the like, the modem lights all go on and seem to be
functioning properly, the data transmit lights seem to send the the
but browsers don't work in KDE or Gnome.
How can I test this situation in terminal mode to see if this PPP
connection is really working. why are the browsers not accessing the web??
ifconfig shows the PPP0 interface but I can't ping anything!!
someone on this list said to use pppstatus to check
can I test this situation in terminal mode to see if this PPP
connection is really working. why are the browsers not accessing the web??
Browsers don't work means you get a message as to what?
what does /etc/resolv.conf have in it?
Hugo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
Hello
(please use a shorter subject nex time)
Ken Januski ([EMAIL PROTECTED]) wrote:
Can anyone give me any clues as to why I need to run ifconfig xxx
down in order to use pon and modem? I haven't had a network until
recently but now that I do it would be nice to not need to turn the
Hi all,
I configured ppp successfully using pppconfig and make use of pon/poff
commands to bring up and bring down the link respectively. However, pon only
works when ran as root and refuses otherwise.
[EMAIL PROTECTED]:~$ pon
please configure /etc/ppp/peers/provider or use a command line
Hello
Alphonse Ogulla ([EMAIL PROTECTED]) wrote:
Is it possible to run pon as non root? Tried changing some parameters
in /etc/ppp/options and /etc/ppp/peers/provider with little or no
success. Anyway, if it is possible then how does one go about it.
Add your user account to the dip group to
--- Alphonse Ogulla [EMAIL PROTECTED] wrote: Hi
all,
I configured ppp successfully using pppconfig and
make use of pon/poff
commands to bring up and bring down the link
respectively. However, pon only
works when ran as root and refuses otherwise.
[EMAIL PROTECTED]:~$ pon
please
That remarkable Thu, Oct 02, 2003 at 12:36, Alphonse Ogulla wrote:
Hi all,
I configured ppp successfully using pppconfig and make use of pon/poff
commands to bring up and bring down the link respectively. However, pon only
works when ran as root and refuses otherwise.
run pppconfig, choose
On Thursday 02 October 2003 12:36, Alphonse Ogulla wrote:
Hi all,
I configured ppp successfully using pppconfig and make use of pon/poff
commands to bring up and bring down the link respectively. However, pon
only works when ran as root and refuses otherwise.
[EMAIL PROTECTED]:~$ pon
On Tue, Aug 19, 2003 at 02:54:24PM +0300, Alphonse Ogulla wrote:
Just configured ppp and established a connection using pon. ifconfig ppp0
shows device ppp0 is up and running but with no indication of the negotiated
bandwidth. How can I establish the speed in Kbps at which I'm connected?
On Wednesday 20 August 2003 11:47, Shaul Karl wrote:
On Tue, Aug 19, 2003 at 02:54:24PM +0300, Alphonse Ogulla wrote:
Just configured ppp and established a connection using pon. ifconfig ppp0
shows device ppp0 is up and running but with no indication of the
negotiated bandwidth. How can I
Just configured ppp and established a connection using pon. ifconfig ppp0
shows device ppp0 is up and running but with no indication of the negotiated
bandwidth. How can I establish the speed in Kbps at which I'm connected?
--
Alphonse Ogulla
Nairobi, Kenya
--
To UNSUBSCRIBE, email to
Hi all,
I would like to etablish a ppp-connection via IrDA-port and
my mobile phone to my ISP.
But what works via serial cable - lacks on my knowledge about IrDA.
dmesg shows the entry: IrDA (tm) Protocols for Linux-2.2
I need a IrDA-device for an entry in pppconfig.
But I don't have a device
Dear People,
Anyone with experience setting up a ispwest ppp account on Debian? I
thought I would give them a try since they offer a 15 day free trial
account, but I'm having problems getting set up with pppconfig. My
current ISP worked right out of the box with PAP.
I suppose they support PAP,
On 12 Jan 2003, Sven Bornemann wrote:
John Hasler wrote:
Sven writes:
I think somehow I must make the ISP server belief that I just logged on,
while I'm online for one and a half our or so...
Or just add the 'persist' option so that pppd dials up again whenever it
gets
Anthony Campbell wrote:
On 12 Jan 2003, Sven Bornemann wrote:
John Hasler wrote:
Sven writes:
I think somehow I must make the ISP server belief that I just logged on,
while I'm online for one and a half our or so...
Or just add the 'persist' option so that pppd
Sven writes:
But when I was running Gentoo Linux, I just configured my connection with
pppconfig...
^
Was this the same pppconfig you use in Debian?
--
John Hasler
[EMAIL PROTECTED]
Dancing Horse Hill
Elmwood, Wisconsin
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
John Hasler wrote:
Sven writes:
But when I was running Gentoo Linux, I just configured my connection with
pppconfig...
^
Was this the same pppconfig you use in Debian?
I looked at the Gentoo application database
and I saw that Gentoo is using Debian's
pppconfig source for
Sven writes:
I looked at the Gentoo application database and I saw that Gentoo is
using Debian's pppconfig source for building. However, I do not know what
modification the Gentoo ebuild script is doing to this source before it
is build and installed...
From a quick glance at their changelog,
Rob Weir wrote:
On Sat, Jan 11, 2003 at 06:08:29PM +0100, Sven Bornemann wrote:
Sorry, I found out that it is the ISP cutting
off the ppp connection after two hours.
But Gentoo could overcome this somehow.
Any ideas how this is done?
Maybe they idle you out after two hours? You could
Sven writes:
I think somehow I must make the ISP server belief that I just logged on,
while I'm online for one and a half our or so...
Or just add the 'persist' option so that pppd dials up again whenever it
gets disconnected.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
Dancing Horse Hill
Hello,
I'm using Woody and my ppp connection is always terminated after 2 hours.
I just used pppconfig to configure the modem dail-up connection and
everything works fine.
I did not change anything in /etc/ppp/options, so that the ppp option
maxconnect should not be set.
The problem is probably
Sorry, I found out that it is the ISP cutting
off the ppp connection after two hours.
But Gentoo could overcome this somehow.
Any ideas how this is done?
Sven
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi
Nach der Installation von Debian 3.0 habe ich mit pppconfig meinen
Internetzugang konfiguriert.
Hat alles soweit geklappt und konnte surfen.
Danach have ich mit netcardconfig mein Netzwerk konfiguriert,
seitdem kann ich zwar über pup zu meinem Provider verbinden, doch keine
Addresse im
Hi all,
This may be slightly off-topic, but I think this may be two of the
better forums to help me solve this problem.
I'm connecting through FLETS ISDN under KDDI DION here in Japan. If
this makes no sense, don't worry about it too much. I don't think it
may make a difference, but for the
Hi
I have a machine running debian that has a ppp connection to the
internet (ppp0) and an ethernet connection to my network (eth0. I have 6
static public ip addresses, at the moment the debian machine has two of
these one for the external interface ppp0 and one for the internal interface
eth0
On Thu, Feb 21, 2002 at 03:22:46PM +, Charlie Grosvenor wrote:
| Hi
| I have a machine running debian that has a ppp connection to the
| internet (ppp0) and an ethernet connection to my network (eth0. I have 6
| static public ip addresses, at the moment the debian machine has two
Hi,
Just switched from SuSE to Debian potato. Can't get my ppp connection to
work. I'm pretty sure I configured wvdial correctly. It dials, logs in, then
it says PPP negotiation detected, Starting ppp at date time. Nothing
more. None of my browsers work. Can't open any internet site. When I try
Just switched from SuSE to Debian potato. Can't get my ppp connection to
work. I'm pretty sure I configured wvdial correctly. It dials, logs in, then
it says PPP negotiation detected, Starting ppp at date time. Nothing
more. None of my browsers work. Can't open any internet site. When I try
yes, you are right, it was the /etc/resolv.conf. Thank you!
---Original Message---
From: Jason Majors
Date: Friday, January 25, 2002 12:09:26 PM
To: Debian User
Subject: Re: ppp connection doesn't work
Just switched from SuSE to Debian potato. Can't get my ppp connection to
work. I'm
1 - 100 of 361 matches
Mail list logo