Le 05.11.2003 17:30, Antoine Delaporte a écrit :
Le Wed, Nov 05, 2003 at 04:38:43PM +0100, Jean-Luc Coulon (f5ibh)
écrivait:
Ok, pas de problème pour les couches, je vois bien de quoi il s'agit
(même avec AIX :-o). Je penserai à evms dans une étape
ultérieure ;-)
Euh... evms si je ne
El jue, 02-10-2003 a las 02:19, Gustavo escribió:
trujo wrote:
Bueno yo tengo montados un par sistemas en raid 1 casi como tu, lo
explico.
Todas las partisiones del raid son fd.
En los dos disco tengo particiones swap que no pertenecen al raid (es
mas eficaz).
En los dos discos hay una
Buenas, estoy intentando configurar un RAID 1 por software en debian woody.
Y me estoy mareando un poco por la documentacion, tengo el kernel 2.4.18
recompilado con soporte para raid 1 y hice un apt-get install raidtools
raidtools2 para implementarlo.
Tengo dos HDS IDE de 40GB Particionados
Bueno yo tengo montados un par sistemas en raid 1 casi como tu, lo
explico.
Todas las partisiones del raid son fd.
En los dos disco tengo particiones swap que no pertenecen al raid (es
mas eficaz).
En los dos discos hay una partición (/boot) que no forma parte del raid
pero que las sincronizo
trujo wrote:
Bueno yo tengo montados un par sistemas en raid 1 casi como tu, lo
explico.
Todas las partisiones del raid son fd.
En los dos disco tengo particiones swap que no pertenecen al raid (es
mas eficaz).
En los dos discos hay una partición (/boot) que no forma parte del raid
pero que
On Thu, Sep 18, 2003 at 02:13:40AM +0200, Arnt Karlsen wrote:
The definitive guide is:
http://people.debian.org/~blade/install/
I wrote something too:
http://www.debian.org/doc/manuals/reference/ch-tips.en.html#s-chroot
..thanks, this helps me _use_ chroot and debootstrap, but
On Thu, 18 Sep 2003 20:48:12 +0200,
Osamu Aoki [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]:
On Thu, Sep 18, 2003 at 02:13:40AM +0200, Arnt Karlsen wrote:
The definitive guide is:
http://people.debian.org/~blade/install/
I wrote something too:
Datenintegritaet zu wahren, moechte ich die beiden 120 GB Disks
mit Software RAID 1 spiegeln. Geschwindigkeit ist in der jetzigen
Projektphase nicht so wichtig aber ein Datenverlust waere schon heftig.
Spaeter in der Produktionsphase soll rsync die Daten auf eine zweite
Maschine spiegeln.
Ist das mit
auch zwischen zwei Backups
Datenintegritaet zu wahren, moechte ich die beiden 120
GB Disks mit Software RAID 1 spiegeln. Geschwindigkeit
ist in der jetzigen Projektphase nicht so wichtig aber
ein Datenverlust waere schon heftig.
[...]
Ist das mit debian sarge problemlos realisierbar?
Ja
On Wed, Sep 17, 2003 at 02:30:01AM +0200, Arnt Karlsen wrote:
On Tue, 16 Sep 2003 01:04:51 +0100,
Karsten M. Self [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]:
^^
Hmmm.. Karsten may have finally got DSL/cable ? :)
So while I'd recommend a
On Thu, 18 Sep 2003 00:30:20 +0200,
Osamu Aoki [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]:
On Wed, Sep 17, 2003 at 02:30:01AM +0200, Arnt Karlsen wrote:
On Tue, 16 Sep 2003 01:04:51 +0100,
Karsten M. Self [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]:
On Tue, 16 Sep 2003 01:04:51 +0100,
Karsten M. Self [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]:
on Sun, Sep 14, 2003 at 04:38:50PM +0200, Arnt Karlsen ([EMAIL PROTECTED])
wrote:
On Sun, 14 Sep 2003 03:40:40 +0100,
Karsten M. Self [EMAIL PROTECTED] wrote in message
[EMAIL
on Sun, Sep 14, 2003 at 04:38:50PM +0200, Arnt Karlsen ([EMAIL PROTECTED]) wrote:
On Sun, 14 Sep 2003 03:40:40 +0100,
Karsten M. Self [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]:
As I frequently say, the advantage of a chroot install is that it
allows you to tackle one problem
PROTECTED]:
On Fri, 2003-09-12 at 18:31, Arnt Karlsen wrote:
Hi,
..has anyone tried use these methods to intall to boxes with
RAID-1 etc disks?:
..note to self; heed ESR's advice on asking smart; I ofcourse meant
software RAID but never said so.
I assume that's yourself
Hi,
..has anyone tried use these methods to intall to boxes
with RAID-1 etc disks?:
http://twiki.iwethey.org/Main/DebianChrootInstall
http://trilldev.sourceforge.net/files/remotedeb.html
--
..med vennlig hilsen = with Kind Regards from Arnt... ;-)
...with a number of polar bear hunters in his
to boxes
with RAID-1 etc disks?:
http://twiki.iwethey.org/Main/DebianChrootInstall
http://trilldev.sourceforge.net/files/remotedeb.html
--
..med vennlig hilsen = with Kind Regards from Arnt... ;-)
...with a number of polar bear hunters in his ancestry...
Scenarios always come in sets
On Fri, 12 Sep 2003 21:31:38 -0400,
Greg Folkert [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]:
On Fri, 2003-09-12 at 18:31, Arnt Karlsen wrote:
Hi,
..has anyone tried use these methods to intall to boxes
with RAID-1 etc disks?:
..not to self; heed ESR's advice on asking
Günter alias Claudia Maiwald schrieb:
Ich habe einen HIGHPOINT Controller und möchte damit ein RAID 1
betreiben.
Mit einem Software-RAID wärst Du von der Hardware unabhängiger und
flexibler dran. Es gibt mehrere Programme zum Setup und ich würde
mdadm nehmen.
--
[EMAIL PROTECTED
martin f krafft wrote:
also sprach Juri Haberland [EMAIL PROTECTED] [2003.08.22.0049 +0200]:
Generally I recommend to use mdadm, because it is more flexible
and actively maintained by Neil Brown, the Linux SoftwareRAID guy.
Okay, I will check it out. Can it do the persistent superblock
Ich habe einen HIGHPOINT Controller und möchte
damit ein RAID 1 betreiben.
Als Festplatten habe ich 2 x 40 GB im System
eingebaut und von diesen Platten muß ich auch booten.
Welchen KERNEL und was sonst brauche ich noch damit
das funktioniert.
Hilfestellung bitte an [EMAIL PROTECTED
Ich habe einen HIGHPOINT Controller und möchte
damit ein RAID 1 betreiben.
Als Festplatten habe ich 2 x 40 GB im System
eingebaut und von diesen Platten muß ich auch booten.
Welchen KERNEL und was sonst brauche ich noch damit
das funktioniert.
Hilfestellung bitte an [EMAIL PROTECTED
On Sun, 24 Aug 2003 20:49:58 +0200,
Claudia Maiwald [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]:
Ich habe einen HIGHPOINT Controller und möchte damit ein RAID 1
betreiben.
Als Festplatten habe ich 2 x 40 GB im System eingebaut und von diesen
Platten muß ich auch booten
also sprach Juri Haberland [EMAIL PROTECTED] [2003.08.22.0049 +0200]:
Generally I recommend to use mdadm, because it is more flexible
and actively maintained by Neil Brown, the Linux SoftwareRAID guy.
Okay, I will check it out. Can it do the persistent superblock
thingie?
--
Please do not CC
, algorithm 0 [3/3] [UUU]
md10 : active raid5 hdg10[3] hde10[2] hdc10[1] hda10[0]
1999616 blocks level 5, 32k chunk, algorithm 0 [3/3] [UUU]
unused devices: none
As you can see, the first is a simple RAID 1, all the others are
RAID 5. All have a chunk size of 32
martin f krafft wrote:
I set up a Software RAID System previously. It contains four 120Gb
harddrives, 8 partitions on each, with the forth drive being used as
a spare:
[SNIP]
As you can see, the first is a simple RAID 1, all the others are
RAID 5. All have a chunk size of 32 and an ext3
also sprach Juri Haberland [EMAIL PROTECTED] [2003.08.21.1034 +0200]:
The first thing I notice is that you compare two different
filesystems: reiserfs and ext3. It is a known fact that reiserfs
is in most workloads *much* faster than ext3.
Right, but while I had zero dataloss on ext3
martin f krafft wrote:
also sprach Juri Haberland [EMAIL PROTECTED] [2003.08.21.1034 +0200]:
The first thing I notice is that you compare two different
filesystems: reiserfs and ext3. It is a known fact that reiserfs
is in most workloads *much* faster than ext3.
Right, but while I had zero
also sprach martin f krafft [EMAIL PROTECTED] [2003.08.21.1254 +0200]:
Do all disks have DMA turned on?
This might be the problem. I turn DMA on, always, in /etc/inittab.
But it doesn't work. Check this:
ailab:~# hdparm -d1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
also sprach Juri Haberland [EMAIL PROTECTED] [2003.08.21.1605 +0200]:
Right, but while I had zero dataloss on ext3 filesystems so far,
I have been screwed over by reiserfs a couple of times.
I didn't suggest that you actually *use* reiserfs, but if you're doing
benchmarks you should do
martin f krafft wrote:
I would still appreciate comments to the following:
Try with the defaults values for chunk size, algorithm and ext3 stride.
Which are? I could not see any.
Did you read my other mail? With defaults I mean that what you get, if
you don't use any special commandline
martin f krafft wrote:
also sprach Juri Haberland [EMAIL PROTECTED] [2003.08.21.1605 +0200]:
Well, I don't know about ext3, but my RAID5 device, which I created
without any special commandline parameters, looks like this:
md7 : active raid5 hdg9[2] hde1[1] hda9[0]
160086272 blocks
Witam wszystkich Grupowiczów.Szukałem, szukałem i znaleźć nic
ciekawego nie znalazłem.Sprzęt:PIV 1,8 GhzAsus P4B533-E (RAID
Onboard PDC20276 Promise)2xHDD 40 GB Seagate - skonfigurowane w RAID 1
(Mirroring)No i problem :(Nie mam pojęcia jak posadzić na tak
skonfigurowanych dyskach Debiana
NetOperek wrote:
Okej zajrzałem, poczytałem - lecz niestety nie znajduję tam rozwiązania,
..co prawda było to prawie rok temu ale mniej wiecej zrobiłem tak:
1. podłączylem jeden dysk to zwykłego kanału ide
2. zainstalowałem debiana
3. przekompilowałem jajko
W liście z sob, 16-08-2003, godz. 17:17, NetOperek pisze:
Witam wszystkich Grupowiczów.
Szukałem, szukałem i znaleźć nic ciekawego nie znalazłem.
Sprzęt:
PIV 1,8 Ghz
Asus P4B533-E (RAID Onboard PDC20276 Promise)
Mialem okazje instalowac Debiana na plycie Asusa z kontrolerem RAID
IDE.
Single-User-Mode starten). Der Artikel findet
sich online, einfach mal suchen: linux-magazin.de.
Falls interesse besteht, ich habe vor ein paar Wochen mit Erfolg aus
einem System auf einer 40GB-HD ein RAID-1 mit 2 40GB-HD gemacht, ohne
Datenverlust.
Welche RAID-Controller empfehlt ihr? IDE-, ATA
Am 02:00 2003-07-24 +0200 hat Oliver Baltz geschrieben:
[EMAIL PROTECTED],
noch eine Frage: Habe vor mir einen RAID-Controller und 2 Platten zwecks
Datensicherheit anzuschaffen.
Kann ich ein bestehendes System von einer anderen kleineren Platte auf
die 2
gespiegelten RAID-Platten kopieren?
Geht
[EMAIL PROTECTED],
noch eine Frage: Habe vor mir einen RAID-Controller und 2 Platten zwecks
Datensicherheit anzuschaffen.
Kann ich ein bestehendes System von einer anderen kleineren Platte auf die 2
gespiegelten RAID-Platten kopieren?
Geht das mit parted?
Welche RAID-Controller empfehlt ihr?
Moin Oliver, Liste
[EMAIL PROTECTED],
noch eine Frage: Habe vor mir einen RAID-Controller und 2 Platten zwecks
Datensicherheit anzuschaffen.
Gute Entscheidung.
Kann ich ein bestehendes System von einer anderen kleineren Platte auf die
2 gespiegelten RAID-Platten kopieren?
Geht das mit
Sao Bernardo do Campo SP Brazilo
Stela dato: 2.452.837,457
Loka tempo: 2003-7-16 19:58:34
Saluton!
No dia 9/7/03, 14:27:28, Srinath Mantripragada [EMAIL PROTECTED]
escreveu o seguinte sobre o tema Re: Raid-1???:
Isso é piada né ??
brincadeira ...
Isso demonstra o nível dos
Em Qua, 2003-07-09 Ã s 09:58, Rodrigo Mattos Nascimento escreveu:
Bom dia;
Saberiam me dizer como montar um RAID-1 com 2HDs ide de 40Gb(cada) no
Windows2000???
entra na lista da micro$oft e pergunta... :/
isso aqui é -- debian-user-portuguese@lists.debian.org
Aguardo retorno
Bom dia;
Saberiam me dizer como montar um RAID-1 com 2HDs ide de 40Gb(cada) no
Windows2000???
Aguardo retorno...
Atenciosamente;
Rodrigo Mattos
Técnico de Informática
:
Bom dia;
Saberiam me dizer como montar um RAID-1 com 2HDs ide de 40Gb(cada) no
Windows2000???
Aguardo retorno...
Atenciosamente;
Rodrigo Mattos
Técnico de Informática
--
coYote_
| _ Eduardo Peters - Canoinhas - SC |
| °v° Eng. de
Isso é piada né ??
brincadeira ...
On Wed, 2003-07-09 at 09:58, Rodrigo Mattos Nascimento wrote:
Bom dia;
Saberiam me dizer como montar um RAID-1 com 2HDs ide de 40Gb(cada) no
Windows2000???
Aguardo retorno...
Atenciosamente;
Rodrigo Mattos
Técnico de Informática
;
Saberiam me dizer como montar um RAID-1 com 2HDs ide de 40Gb(cada) no
Windows2000???
Aguardo retorno...
Atenciosamente;
Rodrigo Mattos
Técnico de Informática
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Liga pro suporte da M$ e pergunta.
-Mensagem original-
De: Rodrigo Mattos Nascimento
[mailto:[EMAIL PROTECTED]
Enviada em: quarta-feira, 9 de julho de 2003 9:58
Para: debian-user-portuguese@lists.debian.org;;
[EMAIL PROTECTED]
Assunto: Raid-1???
Bom dia;
Saberiam me dizer como montar
oi!:-)tudo em ordem?:-) aliais muito obrigado por ler esse email:-)
vamos nos:-)
eu queria aprender a instalar o woody 3.0 r1
numa maquina com 2 hd's ide , tipo
hda -- disco 1 do raid 1
hdc -- disco 2 do raid 1
hdd -- cdrom do sistema
dar boot pelo cd1 de instalacao do woody (com kernel 2.4
[EMAIL PROTECTED],
ich möchte bei einer Debian-Installation (3.0.1r1a / Disk. 2.4) bereits ein
SoftwareRAID auf zwei gleich Grosse SCSI-Partitionen einrichen. Diese sollen
als RAID-1 laufen und als / eingehängt werden.
Kann man das bereits wärend der Installation und mit der / Partition machen
On Sunday 16 February 2003 08:35, Alvin Oga wrote:
== my raid test ...
- unplug /dev/hda ... and try to boot ( into degraded mode )
- unplug /dev/hdc ... and try to boot
- it should still boot w/o any intervention/typing
- copy a 2TB file to the raid disks
On Sun, 16 Feb 2003, Nicos Gollan wrote:
On Sunday 16 February 2003 08:35, Alvin Oga wrote:
== my raid test ...
- unplug /dev/hda ... and try to boot ( into degraded mode )
- unplug /dev/hdc ... and try to boot
- it should still boot w/o any intervention/typing
On Saturday 15 February 2003 05:28, Nathan E Norman wrote:
[1] I hear 3ware doesn't suck, but I've never used one.
From what I read in a review in c't magazine, 3ware has nice drivers included
in the standard kernel and good performance when it comes to RAID 0 or 1. The
review also had a look
On Fri, 14 Feb 2003, Pedro Ruivo (TRQV-DSI) wrote:
I've bought a Highpoint RocketRaid 100 card in order to have a fault
tolerant system. Unfortunately i didn't checked if it was supported under
Debian Linux.
suppsedly, supported hw raid is listed here
- if its not listed...
I've bought a Highpoint RocketRaid 100 card in order to have a fault
tolerant system. Unfortunately i didn't checked if it was supported under
Debian Linux.
It turns out that although i could use it with RedHat, Suse,
Turbo,...,Linux they don't provide drivers for debian, they do
On Friday 14 February 2003 16:39, Pedro Ruivo (TRQV-DSI) wrote:
It turns out that although i could use it with RedHat, Suse,
Turbo,...,Linux they don't provide drivers for debian, they do provide a
open source driver.
That open source driver supports the chip as a simple IDE
On 14 Feb 03 15:39:11 GMT, Pedro Ruivo TRQV-DSI [EMAIL PROTECTED] wrote:
I have to say one other thing, wich is the disappointmento with linux
in this concern, shouldn't there be a Linux Driver ?
I find drivers for Red Hat, Suse, Turbo, ... Linux but not for
Debian and
this Linux difficulties which M$
doesn't have.
--
Got Backup?
OOoops,...nnoope..
Thanks again
Pedro Ruivo
-Mensagem original-
De: Nicos Gollan [mailto:[EMAIL PROTECTED]]
Enviada: sexta-feira, 14 de Fevereiro de 2003 17:53
Para: [EMAIL PROTECTED]
Assunto: Re: Hardware IDE ATA Raid 1
Title: Hardware IDE ATA Raid 1 support in Linux Debian
I've bought a Highpoint RocketRaid 100 card in order to have a fault tolerant system. Unfortunately i didn't checked if it was supported under Debian Linux.
It turns out that although i could use it with RedHat, Suse, Turbo,...,Linux
Hola, estoy intentando configurar un raid 1 por software en una debian,
alguien
que lo haya probado antes o que tenga una configuraciones simliar sobre
debian me podria ayudar un poco. He buscado información pero no he encontrado
mucaha cosa.
Lo he probado sobre suse y es facial, te deja
Last night I finally got around to reinstalling one of my systems, this
one has a nice SCA hot swap backplane. So I configured it with 2 18GB disks
in software raid 1(4 partitions). There is nothing important on this system
yet but I was curious about how to recover from a disk failure, so I
hi ya nate
Device BootStart EndBlocks Id System
/dev/sdb1 * 1 2 16033+ 83 Linux
i'd make sdb1 also raid autodetect
so you can boot even if sda or sdb dies
/dev/sdb2 3 2213 17759857+ 5 Extended
/dev/sdb5 3
Alvin Oga said:
i'd make sdb1 also raid autodetect
so you can boot even if sda or sdb dies
sd[ab]1 is my /boot partition, currently I have LILO installed into the
MBR of sda, lilo can be a real bitch to install on anything but the first
disk(usually get the dreaded LI message when trying
hi ya nate
On Wed, 22 Jan 2003, nate wrote:
Alvin Oga said:
i'd make sdb1 also raid autodetect
so you can boot even if sda or sdb dies
sd[ab]1 is my /boot partition, currently I have LILO installed into the
MBR of sda, lilo can be a real bitch to install on anything but the first
Alvin Oga said:
did you make a boot floppy w/ the same kernel you're using in lilo.conf
- try using syslinux to make your boot floppy
http://www.Linux-Consulting.com/Boot/
( see the Boot.syslinux section )
yep made a boot floppy, but made it manually, the
hi ya
- try using syslinux to make your boot floppy
http://www.Linux-Consulting.com/Boot/
( see the Boot.syslinux section )
yep made a boot floppy, but made it manually, the system pukes when
it tries to load the scsi driver. lots of bus timeouts, and
.
At 12:15 14.11.02 +0100, you wrote:
Könntet ihr mir Tips geben wo ich ein Howto für die jetzt aktuelle Woody
finden kann, bzw. gibt es modifizierte Boot-Disks die mir die
Installation gleich auf ein Raid-1 ermöglichen ?
Konkret leider nicht.
MfG
Imo
--
Häufig gestellte Fragen und
Hi,
ich habe eine Rechner mit 2 SCSI Platten welcher als Accounting-Rechner
fungieren soll. Aus Sicherheitsgründen sollte eine Platte gleichzeitig
auf die andere gespiegelt (RAID-1) werden.
Leider findet sich keine Option bei gleich bei der Installation von
Woody dies zu realisieren. Also habe
auf ein Raid-1 ermöglichen ?
Nicht besonders toll, aber hier:
http://people.debian.org/~blade/install/#lvm
Gruss/Regards,
Eduard.
--
Es ist schwieriger ein Vorurteil zu zertrümmern, als ein Atom.
Albert Einstein
--
Häufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org
Boa tarde povo..
to com um problema estranho...
ja fiz raid em outros 2 servers e nao deu erro...so q nesse servidor q estou
tentando ta ocorrendo um erro estranho..
quando tento montar a particao ocorre o seguinte erro:
diego:/# mount /dev/md1 /mnt/boot/
mount: wrong fs type, bad option, bad
Hélio;
Pelo que eu vi está faltando a especificação do filesystem. Vc tá
usando oq ? ext2 ou ext3 ou raiserfs ?
Tomando como exemplo o ext3, ficaria mais ou menos assim:
mount -t ext3 /dev/md1 /mnt/boot
[]'s,
Still
* Hélio José Poffo Junior - Passebus ([EMAIL PROTECTED])
El Jue 04 Jul 2002 22:06, José Luis Fernández Barros escribió:
Tenemos una Promise software RAID con dos discos duros. Queremos instalar
Woody directamente en los dos discos duros pinchados en la Promise.
El problema es que al arrancar la instalación, Debian no ve ningún disco.
Hemos intentado
Hola:
¿Alguién ha instalado alguna vez una debian sobre una tarjeta RAID
soportada por el Kernel 2.4.x pero no por los discos de arranque?
Se trata de una raid de adaptec 2100s y con redhat, me lo instala
perfectamente, pero estoy tratando de buscar los discos de SCSI de
Debian y no los
Angel, Instale Debian en varios equipos con placas RAID ( Estoy escribiendo
este mail sobre una Mylex DAC960 ;) principalmente con la linea NETRAID de HP.
Son placas AMI Megaraid o Adaptec.
Despues de cansarme de probar con distintos diskettes de booteo agrege un
disco IDE al equipo, realize
Tenemos una Promise software RAID con dos discos duros. Queremos instalar
Woody directamente en los dos discos duros pinchados en la Promise.
El problema es que al arrancar la instalación, Debian no ve ningún disco.
Hemos intentado cargar el módulo pdcraid.o, pero no nos deja antes sin haber
=that_one_u_used_from_rescue_partition.gz
c ya
alvin
On Sun, 26 May 2002, Patrick Albuquerque wrote:
Hi,
I've been struggling to boot into a RAID-1 (mirroring)
o root is hda3, hdc3 as /dev/md0
o hda3 hdc3 have partition type 'fd'
o root is Ext3
o RAID enabled
Hello debian-user-german,
Hi,
wenn ich Debian neuinstalliere, erkennt er automatisch das Raid 1
System?
--
Best regards,
Daniel
www.net-shell.de
NET-Shell mailto:[EMAIL PROTECTED]
--
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem
neuinstalliere, erkennt er automatisch das Raid 1
System?
--
Best regards,
Daniel
www.net-shell.de
NET-Shell mailto:[EMAIL PROTECTED]
--
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject unsubscribe. Probleme? Mail an [EMAIL
On Mon, May 27, 2002 at 11:37:42AM +0200, NET-Shell Support wrote:
Hello debian-user-german,
Hello debian-abuser-german,
Hi,
wenn ich Debian neuinstalliere, erkennt er automatisch das Raid 1
System?
Kannst Du auch mal selber nachdenken, nachlesen und dir etwas erarbeiten?
Gut, denn
Hello Ingo,
Monday, May 27, 2002, 12:29:11 PM, you wrote:
IJ On Mon, May 27, 2002 at 11:37:42AM +0200, NET-Shell Support wrote:
Hello debian-user-german,
IJ Hello debian-abuser-german,
Hi,
wenn ich Debian neuinstalliere, erkennt er automatisch das Raid 1
System?
IJ Kannst Du auch
NET-Shell Support wrote:
Hello Ingo,
Monday, May 27, 2002, 12:29:11 PM, you wrote:
IJ Hello debian-abuser-german,
Hi,
wenn ich Debian neuinstalliere, erkennt er automatisch das Raid 1
System?
IJ Kannst Du auch mal selber nachdenken, nachlesen und dir etwas erarbeiten?
IJ Gut
Hi,
I've been struggling to boot into a RAID-1 (mirroring)
o root is hda3, hdc3 as /dev/md0
o hda3 hdc3 have partition type 'fd'
o root is Ext3
o RAID enabled 2.4.18 kernel
o initrd has raid modules (added 'raid1' to
/etc/mkinitrd/modules
On Sun, 26 May 2002, Patrick Albuquerque wrote:
Hi,
I've been struggling to boot into a RAID-1 (mirroring)
o root is hda3, hdc3 as /dev/md0
o hda3 hdc3 have partition type 'fd'
o root is Ext3
o RAID enabled 2.4.18 kernel
o initrd has raid modules (added
On Sat, Feb 23, 2002 at 01:10:08PM -0800, Richard Weil wrote:
One last question ... how can use the swap partitions
on both /dev/hda8 and /dev/hdc8? I did _not_ put the
swap partitions in a RAID setup. Should I simply list
both swap partitions in /etc/fstab? Thanks.
Yep. You'll probably also
On Fri, Feb 22, 2002 at 04:28:46PM -0800, Richard Weil wrote:
Thanks, this is great. A couple of follow-up
questions:
1. How do I get to single user mode without rebooting?
(I know I should already know this.)
init 1
2. Do I need to do anything special to copy the
partitions from
It took a little bit of experimenting, but the basic
steps you laid out worked. Success!
For anyone else who might want to try this, I found I
had to do two things differently:
1. I had to use mkraid instead of raidstart to get
the RAID devices working on /dev/hdc.
2. After copying root and
One last question ... how can use the swap partitions
on both /dev/hda8 and /dev/hdc8? I did _not_ put the
swap partitions in a RAID setup. Should I simply list
both swap partitions in /etc/fstab? Thanks.
Richard
--- Richard Weil [EMAIL PROTECTED] wrote:
It took a little bit of experimenting,
Hi --
I need some help setting up RAID 1 on a fresh Woody
install. The software is newer than the docs,
particularly for Lilo, so any help from those with
experience would be most appreicated.
My hda and hdc drives are identical in size. hda is
divided into multiple partitions -- / (/dev/hda2
On Fri, Feb 22, 2002 at 10:32:17AM -0800, Richard Weil wrote:
I need some help setting up RAID 1 on a fresh Woody
install. The software is newer than the docs,
particularly for Lilo, so any help from those with
experience would be most appreicated.
The Software-RAID-HOWTO got me through
Weil wrote:
I need some help setting up RAID 1 on a fresh
Woody
install. The software is newer than the docs,
particularly for Lilo, so any help from those with
experience would be most appreicated.
The Software-RAID-HOWTO got me through this one.
My hda and hdc drives are identical
http://www.1U-Raid5.net
On Fri, 22 Feb 2002, Dave Sherohman wrote:
On Fri, Feb 22, 2002 at 10:32:17AM -0800, Richard Weil wrote:
I need some help setting up RAID 1 on a fresh Woody
install. The software is newer than the docs,
particularly for Lilo, so any help from those with
experience
www.3ware.com (vendu en france par http://www.dataswift.fr/)
Leur cartes Escalade permettent de faire du RAID 1/5 hotplug hotswap.
De plus leur drivers sont opensource (contrairement aux drivers Promise).
Oui, très bien. Mais ou acheter leur produits en France ? Je n'ai jamais
trouvé
http://www.serveurnet.com/contact.html
-Message d'origine-
De : Stephane Leclerc [mailto:[EMAIL PROTECTED]
Envoyé : jeudi 17 janvier 2002 08:58
À : Debian French List
Objet : Re: RAID 1 en IDE
www.3ware.com (vendu en france par http://www.dataswift.fr/)
Leur cartes Escalade permettent
On Thu, Jan 17, 2002 at 08:57:40AM +0100, Stephane Leclerc wrote:
Salut,
Ps : personnellement, je DECONSEILLE le RAID soft via Kernel. J'ai
essayé 2 fois. Chaque fois le système a été des plus déplorable
en terme de fiabilité et de vitesse. Et je suis gentil.
Tu ne dois pas
Perso j'uitlise une carte promise (RAID 0, 1, 1+0). no problemo jusqu'a
maintenant.
Yannick
- Original Message -
From: Iceman [EMAIL PROTECTED]
To: debian-user-french@lists.debian.org
Sent: Wednesday, January 16, 2002 4:53 PM
Subject: RAID 1 en IDE
Hello,
je cherche une carte pour
www.3ware.com (vendu en france par http://www.dataswift.fr/)
Leur cartes Escalade permettent de faire du RAID 1/5 hotplug hotswap.
De plus leur drivers sont opensource (contrairement aux drivers Promise).
-Message d'origine-
De : Iceman [mailto:[EMAIL PROTECTED]
Envoyé : mercredi 16
Le Wed, Jan 16, 2002 at 04:53:24PM +0100, Iceman a écrit :
je cherche une carte pour faire du RAID 1 (mirroring) avec des disques IDE.
Il faut que le système soit simple et efficace. Et en cas de perte d'un des
deux disques, que l'image se reconstruise d'elle-même, sans avoir à faire
maintes
une carte pour faire du RAID 1 (mirroring) avec des disques
IDE.
Il faut que le système soit simple et efficace. Et en cas de perte d'un
des
deux disques, que l'image se reconstruise d'elle-même, sans avoir à
faire
maintes interventions.
Et surtout, il faut que ça tourne sous Debian
Szabó Dániel wrote:
Hello. I've stucked with this scenario. I've read the howtos and the
documentation 10-15 times, but it did not help :(
All i wanna do (is have some fun), to create a mirror disk system (raid1),
so, if one of the disks fail, the other can easily (and _automatically_)
: the remaining space (linux native)
hdc is just the same.
installed a fresh system on hda3. i got the kernel (2.2.18), and the raid
patch for 2.2.18. after some pretty compiling (raid-1 is in the kernel), i
rebooted the host.
created the /etc/raidtab file:
raiddev/dev/md0
raid-level1
Hi,
I have a little big problem on my little server.
There i have installed the 2.2.13 kernel now i want to change to the latest
2.2.x (2.2.18) due driver updates.
I had compiled all like i do it all the time. But after i restarted my
computer i raid resynchronisized my raid drives (software
Hi, I am running potato and a 2.2.16 kernel on our file server. I
have two raid 1 devices set up, each 10 gigs big. The problem is that it
does not seem to cleanly unmount/update the superblock when I
restart/shutdown (although it says it does). So what happens is each
startup it needs to run
MK == Matt Kopishke [EMAIL PROTECTED] writes:
MK Hi, I am running potato and a 2.2.16 kernel on our file server. I
MK have two raid 1 devices set up, each 10 gigs big. The problem is that it
MK does not seem to cleanly unmount/update the superblock when I
MK restart/shutdown
901 - 1000 of 1003 matches
Mail list logo