Subject: Slink, 2.2.10 and printing
Date: Sun, Jul 11, 1999 at 03:54:04PM -0600
In reply to:Gary L. Hennigan
Quoting Gary L. Hennigan([EMAIL PROTECTED]):
> So I decided to take the plunge and install a 2.2.x kernel (2.2.10),
> under slink. Everything works fine, exce
you proabably have a parallel port printer, I encountered the same problem
with RedHat before, and what I did was when configuring the kernel, in the
character device section (if you are doing make xconfig), enable parallel
port printer.
and then change your printcap's lp1 to lp0 (in most cases tha
Perchance did you not change your /etc/printcap to point to /dev/lp0
instead of /dev/lp1?
Bob
On Sun, Jul 11, 1999 at 03:54:04PM -0600, Gary L. Hennigan wrote:
> So I decided to take the plunge and install a 2.2.x kernel (2.2.10),
> under slink. Everything works fine, except for printing. I can't
So I decided to take the plunge and install a 2.2.x kernel (2.2.10),
under slink. Everything works fine, except for printing. I can't seem
to get the printer to work. lpr seems to work, but when I do an lpq I
get something like:
waiting for lp to become ready (offline ?)
Rank Owner Job Fil
4 matches
Mail list logo
