[ Either me or my mail program is going nutty... I could have sworn
that I replied to the list, not you Justin. Sorry. ]
After much much headache (and almost buying new serial ata raid hw
setup etc.), I got it to work (almost). Solution: compiling my own
kernel. You should have warned me
Something is wacky. Any idea what could be causing such a poor
performance. Quite new hardware, normal IDE, disks in separate BUSses.
tmoby:~# hdparm -T /dev/md0
hdparm -Tt /dev/hda /dev/hdc /dev/md0
/dev/hda:
Timing buffer-cache reads: 1828 MB in 2.00 seconds = 914.00 MB/sec
Timing
Timo Railo wrote:
Something is wacky. Any idea what could be causing such a poor
performance. Quite new hardware, normal IDE, disks in separate BUSses.
tmoby:~# hdparm -T /dev/md0
hdparm -Tt /dev/hda /dev/hdc /dev/md0
/dev/hda:
Timing buffer-cache reads: 1828 MB in 2.00 seconds =
Thanks Benedict,
this is what happened (also tried just -d1).
hdparm -d 1 -c 1 /dev/hda
/dev/hda:
setting 32-bit IO_support flag to 1
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
IO_support = 1 (32-bit)
using_dma= 0 (off)
Man this is tough...
Timo
Hi Timo.
On Wednesday 18 February 2004 08:19, Timo Railo wrote:
Thanks Benedict,
this is what happened (also tried just -d1).
hdparm -d 1 -c 1 /dev/hda
/dev/hda:
setting 32-bit IO_support flag to 1
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
Timo Railo wrote:
Thanks Benedict,
this is what happened (also tried just -d1).
hdparm -d 1 -c 1 /dev/hda
/dev/hda:
setting 32-bit IO_support flag to 1
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
IO_support = 1 (32-bit)
using_dma= 0
On Thursday 12 February 2004 07:05, you wrote:
[snip]
You're going to have problems with that setup. You can't have a raid
using
part of a disk (hdc2) and the entire disk (hdc). You should be using
two
partitions, like this:
# cat /etc/raid/raidtab
raiddev /dev/md0
raid-level
On Sun, 2004-02-08 at 16:38, Timo Railo wrote:
Hi!
I'm having problems getting software raid to work with my IDE drives. I
had Redhat9 installed previously on the same machine (with working
software raid setup), but I'm now moving to Debian.
My kernel is 2.4.18-bf2.4 and has support
Timo Railo wrote:
Hi!
I'm having problems getting software raid to work with my IDE drives. I
had Redhat9 installed previously on the same machine (with working
software raid setup), but I'm now moving to Debian.
My kernel is 2.4.18-bf2.4 and has support for RAID1, which I'm trying
to
Hi David,
thank you for your reply!
I've tried putting it to /etc/fstab, but getting the error on boot
time. And since it's remote computer, it's a little inconvenient cause
it won't continue the bootup process without keyboard input. Here is my
fstab setup:
/dev/hda1 /
On Monday 09 February 2004 10:16, Timo Railo wrote:
Hi David,
thank you for your reply!
I've tried putting it to /etc/fstab, but getting the error on boot
time. And since it's remote computer, it's a little inconvenient cause
it won't continue the bootup process without keyboard input. Here
I've tried putting it to /etc/fstab, but getting the error on boot
time. And since it's remote computer, it's a little inconvenient cause
it won't continue the bootup process without keyboard input. Here is
my
fstab setup:
You should use the option noauto instead of defaults while you're
On Monday 09 February 2004 11:05, Timo Railo wrote:
[snip]
Your fstab file for your raid device is correct. What does your /etc/
raidtab and /etc/raid/raidtab look like? /etc/raidtab should be a link
to /etc/raid/raidtab. Post the contents of /etc/raid/raidtab, and we
may be more able
Hi!
I'm having problems getting software raid to work with my IDE drives. I
had Redhat9 installed previously on the same machine (with working
software raid setup), but I'm now moving to Debian.
My kernel is 2.4.18-bf2.4 and has support for RAID1, which I'm trying
to create. I'm following
14 matches
Mail list logo
