On 7/8/23 03:00, Andrew M.A. Cater wrote:
If you don't have a floppy drive - don't set it up in the BIOS,
If you're running off a disk that's connected via USB - it will be slower
than the same disk directly attached to SATA.
Debian 12 is (probably) no slower than Debian 11 - but it is more
On Fri, Jul 07, 2023 at 12:34:48AM -0400, hlyg wrote:
> deb12 is slow, it complains floppy error. in bios floppy drive is set to
> 1.44M though i have no floppy drive. this isn't problem for deb10/11. it's
> easy to correct bios setting but i am afraid deb12 is still slow.
>
If you don't have a
deb11 also complains floppy error, but it isn't slow
deb12 is slow, it complains floppy error. in bios floppy drive is set to
1.44M though i have no floppy drive. this isn't problem for deb10/11.
it's easy to correct bios setting but i am afraid deb12 is still slow.
Jul 06 23:50:00 bw kernel: scsi 4:0:0:0: Direct-Access USB SanDisk
3.2Gen1
Greg Wooledge wrote on 7/5/23 08:59:
I'm still waiting for setup details to be provided. Is "sh" the user's
I was merely trying to inform the OP that he wasn't alone in seeing this
"Transport endpoint is not connected" message coming from bookworm when prior
versions o
On Wed, Jul 05, 2023 at 04:49:04PM +0200, to...@tuxteam.de wrote:
> On Wed, Jul 05, 2023 at 08:15:14AM -0600, D. R. Evans wrote:
> > to...@tuxteam.de wrote on 7/4/23 22:23:
> >
> > > >
> > > > FWIW, since upgrading to bookworm, I see:
> > >
On Wed, Jul 05, 2023 at 08:15:14AM -0600, D. R. Evans wrote:
> to...@tuxteam.de wrote on 7/4/23 22:23:
>
> > >
> > > FWIW, since upgrading to bookworm, I see:
> > >sh: 0: getcwd() failed: Transport endpoint is not connected
> > > when I ssh
to...@tuxteam.de wrote on 7/4/23 22:23:
FWIW, since upgrading to bookworm, I see:
sh: 0: getcwd() failed: Transport endpoint is not connected
when I ssh into the upgraded box.
This seems to be coming from getcwd() (aka get current working
directory, see man page). Asking the intertubes
On Tue, Jul 04, 2023 at 01:40:18PM -0600, D. R. Evans wrote:
> hlyg wrote on 6/28/23 21:32:
>
> > notification message: Transport endpoint is not connected
> >
>
> FWIW, since upgrading to bookworm, I see:
> sh: 0: getcwd() failed: Transport endpoint is
hlyg wrote on 6/28/23 21:32:
notification message: Transport endpoint is not connected
FWIW, since upgrading to bookworm, I see:
sh: 0: getcwd() failed: Transport endpoint is not connected
when I ssh into the upgraded box.
I have no idea why. (And, just to be clear, this has never
On 7/4/23 16:39, Stanislav Vlasov wrote:
Try fio with config copied from /usr/share/doc/fio/examples/ssd-test.fio
In config set appropriate size and directory and run `fio new_config`
Thank Vlasov! i have never used fio, its manual is long, it isn't
foolproof. i have to back up for write
вт, 4 июл. 2023 г. в 13:25, hlyg :
> i have installed deb12 in usb disk by kingston, it's slow
>
> today i install it in sandisk's, it's normal(fast)
>
> i don't know how to use tool to test usb disk speed
Try fio with config copied from /usr/share/doc/fio/examples/ssd-test.fio
In config set
i have installed deb12 in usb disk by kingston, it's slow
today i install it in sandisk's, it's normal(fast)
i don't know how to use tool to test usb disk speed
Thank David, 3 devices are plugged to usb hub: wifi adapter, receiver
for wireless keyboard/mouse and usb lamp for power only.
i don't have energy to troubleshoot it as it's ok with buster and
bullseye, problem is with deb12, not with my usb device
it's not too bad that newly stable deb12
On Fri 30 Jun 2023 at 13:06:49 (+0800), hlyg wrote:
> Thank David! i suppose it close wifi connection (say goodbye to hot
> spot of cell phone) as i shutdown, i don't have network FS
So I assume you use have a wifi dongle, connected to the hub, that
communicates with the tethered phone's hotspot.
Thank David! i suppose it close wifi connection (say goodbye to hot spot
of cell phone) as i shutdown, i don't have network FS
i don't have usb disk plugged to usb hub
bookworm for both i386 and amd64 seem uncomfortable with my usb hub.
last few lines below show errors
i am now using
t in more swapping,
for example. With bullseye, I ceased trying to run Firefox on an
i386 with 500MB RAM.
> even shutdown is slow, i see it painfully show " Transport endpoint is
> not connected"
So is it waiting for a timeout to expire?
> my usb extension line might cause troub
On 6/29/23 09:20, Charles Curley wrote:
Two thoughts here.
* Does your hub use an external power supply or does it depend on the
computer for power? If the latter, that could be a problem if the
total load exceeds what the computer supplies.
* It could be just a loose connector,
On Wed, 28 Jun 2023 23:32:56 -0400
hlyg wrote:
> my usb extension line might cause trouble, it connect to back of pc
> case at one end, at the other end is usb hub, it's handy because it
> turns one usb socket to four sockets, and it works most of time, but
> sometime it can cause trouble, i
my general impression of bookworm for i386 is slow
i suppose support for i386 becomes poor as its user base shrink
even shutdown is slow, i see it painfully show " Transport endpoint is
not connected"
my usb extension line might cause trouble, it connect to back of pc case
Hi all,
Since this morning I suddenly get the following error in my log:
oct 20 08:47:47 localhost pure-ftpd: ([EMAIL PROTECTED]) [ERROR] Unable to identify
the local socket: Transport endpoint is not connected
These log entries appear at fixed intervals: at 2,3,47 and 48 minutes
past
tenho um servidor e esta ocorrendo o seguinte erro no
messages:
Jul 5 16:19:28 srv smbd[17067]: [2006/07/05 16:19:28,0]
lib/util_sock.c:get_peer_addr(1000)
Jul 5 16:19:28 srv smbd[17067]: getpeername failed. Error was
Transport endpoint is not connected
Jul 5 16:19:28 srv smbd[17067]: [2006
was Transport
endpoint
is not connected Jul 5 16:19:28 srv smbd[17067]:
[2006/07/05
16:19:28, 0] lib/util_sock.c:get_peer_addr(1000) Jul 5
16:19:28 srv smbd[17067]: getpeername failed. Error
was
Transport endpoint is not connected Jul 5 16:19:28 srv
smbd[17067]: [2006/07/05 16:19:28, 0
]: getpeername failed. Error was
Transport endpoint is not connected
Jul 5 16:19:28 srv smbd[17067]: [2006/07/05 16:19:28, 0]
lib/util_sock.c:get_peer_addr(1000)
Jul 5 16:19:28 srv smbd[17067]: getpeername failed. Error was
Transport endpoint is not connected
Jul 5 16:19:28 srv smbd[17067]: [2006
:19:28 srv smbd[17067]: getpeername failed. Error was
Transport endpoint is not connected
Jul 5 16:19:28 srv smbd[17067]: [2006/07/05 16:19:28, 0]
lib/util_sock.c:get_peer_addr(1000)
Jul 5 16:19:28 srv smbd[17067]: getpeername failed. Error was
Transport endpoint is not connected
Jul 5 16:19
was
Transport endpoint is not connected
Jul 5 16:19:28 srv smbd[17067]: [2006/07/05 16:19:28, 0]
lib/util_sock.c:get_peer_addr(1000)
Jul 5 16:19:28 srv smbd[17067]: getpeername failed. Error was
Transport endpoint is not connected
Jul 5 16:19:28 srv smbd[17067]: [2006/07/05 16:19:28
:09, 0] lib/util_sock.c:get_peer_addr(1150)
getpeername failed. Error was Transport endpoint is not connected
[2005/11/14 12:08:09, 0] lib/util_sock.c:get_peer_addr(1150)
getpeername failed. Error was Transport endpoint is not connected
[2005/11/14 12:08:09, 0] lib/access.c:check_access(328
27 matches
Mail list logo
