Hello, I'm running Debian Woody with kernel 2.4.18-bf2.4. It's on a Gateway 2000 P5-200 maching (200MHz) with an ISA Ensoniq Soundscape VIVO 90 sound card. I've installed mpd and phpmd to play music out of the server via a web interface. I had a rough time getting the sound card to work initially, but finally had it working about a week ago. The problem was, the server was unplugged by one of my roommates and I lost all the settings I used to get the sound card working. (I know I'm dumb for not putting them in the boot sequence.) After a few days of Googling, I've tried using the sscape.o module, the ad1848.o module, installed alsa, etc. with no luck.
Upon executing modprobe sscape, I get the response: /lib/modules/2.4.18-bf2.4/kernel/drivers/sound/sscape.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.18-bf2.4/kernel/drivers/sound/sscape.o: insmod /lib/modules/2.4.18-bf2.4/kernel/drivers/sound/sscape.o failed /lib/modules/2.4.18-bf2.4/kernel/drivers/sound/sscape.o: insmod sscape failed Same deal with ad1848.o. I've tried combinations of IRQs, IO, and DMA parameters as suggested by folks on Google. sndconfig returns the same thing every time. I've also tried installing alsa-base and using those drivers through alsaconf. It probes for ISA cards, says there's no match found, and exits. pnpdump shows the ISA card with "Ensoniq SoundscapeVIVO" as the identifier. The relevant portion of lsmod is: sound 52876 0 [v_midi] soundcore 3236 4 [sound] Is there something wrong with my card? Is there a way to get back my configuration before the reboot? Is there something else I should try to get this going? Thanks in advance for any help. -Pat -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]