Hi! Until recently I had an IDE-cd-recorder, so I used ide-scsi-emulation to get it running, compiled it into the kernel and put it into lilo
append="ether=5,0x360,eth1 hda=49585,16,63 hdc=ide-scsi max_scsi_luns=1" Now that I have a SCSI one, I want to get rid of the emulation, but donĀ“t want to compile yet another kernel, so I simply removed the ide-scsi-bit from the append-line and re-run lilo append="ether=5,0x360,eth1 hda=49585,16,63" I thought all was well until I looked at the screen while rebooting today (complete output at the far below): scsi : detected 1 SCSI tape 9 SCSI cdroms total. Now I physically have a scsi-tape, a scsi-cdr and an ide-cdrom, and I know that last time I looked it said about 1 scsi tape and 1 scsi cdr, just as it should. Any hints (other than recompile without ide-scsi-emu)? TIA, &rw scsi-ncr53c7,8xx : at PCI bus 0, device 12, function 0 scsi-ncr53c7,8xx : warning : revision of 35 is greater than 2. scsi-ncr53c7,8xx : NCR53c810 at memory 0xf8800000, io 0xd400, irq 10 scsi0 : burst length 8 scsi0 : NCR code relocated to 0x90600 (virt 0x00090600) scsi0 : test 1 started scsi0 : NCR53c{7,8}xx (rel 17) scsi1 : SCSI host adapter emulation for IDE ATAPI devices scsi : 2 hosts. scsi0 : target 1 accepting asynchronous SCSI scsi0 : setting target 1 to asynchronous SCSI Vendor: HP Model: C1533A Rev: 9503 Type: Sequential-Access ANSI SCSI revision: 02 Detected scsi tape st0 at scsi0, channel 0, id 1, lun 0 scsi0 : target 4 accepting asynchronous SCSI scsi0 : setting target 4 to asynchronous SCSI Vendor: TEAC Model: CD-R58S Rev: 1.0K Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0 Vendor: ASUS Model: CD-S500/A Rev: 1.20 Detected scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0 Vendor: ASUS Model: CD-S500/A Rev: 1.20 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr2 at scsi1, channel 0, id 0, lun 1 Vendor: ASUS Model: CD-S500/A Rev: 1.20 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr3 at scsi1, channel 0, id 0, lun 2 Vendor: ASUS Model: CD-S500/A Rev: 1.20 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr4 at scsi1, channel 0, id 0, lun 3 Vendor: ASUS Model: CD-S500/A Rev: 1.20 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr5 at scsi1, channel 0, id 0, lun 4 Vendor: ASUS Model: CD-S500/A Rev: 1.20 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr6 at scsi1, channel 0, id 0, lun 5 Vendor: ASUS Model: CD-S500/A Rev: 1.20 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr7 at scsi1, channel 0, id 0, lun 6 Vendor: ASUS Model: CD-S500/A Rev: 1.20 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr8 at scsi1, channel 0, id 0, lun 7 scsi : detected 1 SCSI tape 9 SCSI cdroms total. Type: CD-ROM ANSI SCSI revision: 02 -- / Robert Waldner <[EMAIL PROTECTED]> | Phone: +43 1 89933 0 Fax x533 \ \ KPNQwest/AT tech staff | Diefenbachg. 35 A-1150 Wien /