hi ya benedict On Wed, 3 Dec 2003, Benedict Verheyen wrote:
> > I'm one of those who's got all his systems on safe kernels, even if this > > means I don't have full use. NICs on one box aren't supported by > > 2.4.18, and building 2.4.23 is turning into a bitch. > > Is there a page anywhere (if not, there should be one) or info on what > type of patches are added to a debianized kernel and where to find them. i think you can do the following to see what your kernel does uname -a - lets say it says 2.4.22-foo to get a list of modules it supports ls -la /lib/modules/2.4.22-foo to get a list of options built into the kernel cd /usr/local/src wget kernel.org/.....2.4.22.tar.gz tar zxvfp 2.4.22.tar.gz cd linux-2.4.22 ( virgin kernel from kernel.org ) make xconfig - save it's default .. do NOT change anything mv .config .config.defaults make oldconfig - should create a .conf of your kernel diff .config .config.defaults - to see the differences - dont know if that still works.. havent tried it in years.. - its 100x easier/faster to make your own kernel than to figure out what they did to it > 1. Either this info just isn't there because you don't need cramfs > for an initrd initrd is NOT needed .. - not needed if all the options are built intot he kernel - not needed if your / is under the 1024 cyl boundry initrd is used primarily to boot your system, when the kernel you're trying to use doesnt have all the options defined ( you cant read the scsi disk till you have a kernel to read ( the kernel off the scsi disk .. the typical catch-22 problem - build the scsi drivers into your custom kernel and boot it and that problem goes away c ya alvin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]