La idea es que ese postinst no dependa de bash a través de /bin/sh
para que no falle nunca aunque el propio bash esté en mal estado.
Claro, visto asi, es razonable que sea un binario ejecutable. Sin embargo,
creo que es el que falla durante la instalacion, he seguido la indicacion de
Hernan
At 11.01 17/3/99 -0500, you wrote:
El Wed, Mar 17, 1999 at 04:46:16PM +0100, Jesús Pérez Franco dijo:
Hola soy un estudiante de la Escuela Superior de Ingenieria de Cadiz y
tengo un problema con la configu- ración del xwindows. Tengo una tarjeta de
video SiS 6215C y no aparece en la lista
Hola:
He estado instalando Debian 2.0 en un PC nuevo
con un Pentiun II a 350 Mhz
y una placa Intel Seattle SE440-BX a 100 Mhz.
La instalación ha ido bien, pero a la hora de conectar a internet,
me daba un extraño mensaje de IO error.
Investigando he visto que en el arranque solo encuentra el
Fernando wrote:
...
Investigando he visto que en el arranque solo encuentra el primer
puerto serie, y no encuentra el puerto paralelo. (Adjunto dmesg)
( he probado con el comando setserial y no reconoce nada mas que el
/dev/ttyS0 )
...
Starting kswapd v 1.4.2.2
Serial driver version 4.13
Me he descargado las imagenes iso de slink (desde uk) y he comprobado
que hay algunos errores. Concretamente los ficheros del directorio
dists/slink/main/upgrade-older-i386/deb-files
data-dumper_2.07-1.deb
../../binary-all/interpreters/data-dumper_2.07-1.deb
Jordi Roman Mejias wrote:
Fernando wrote:
...
Investigando he visto que en el arranque solo encuentra el primer
puerto serie, y no encuentra el puerto paralelo. (Adjunto dmesg)
( he probado con el comando setserial y no reconoce nada mas que el
/dev/ttyS0 )
...
Starting kswapd v
Buenas.
Después de pelearme un rato con el multicd, he podido hacer la actualización
de aquella manera... La cuestión es que, después de intentar instalar el
wmaker, me dá un error de Violación de segmento.
¿Alguna idea? Ahora mismo tengo que usar el After, ya que no se me ha
instalado el
On Sun, 21 Mar 1999, Andres Seco Hernandez wrote:
¿Alguien me puede aclarar si en Debian no hay clock de linea de comando
o es que no tengo montado algun paquete importante? ¿o simplemente
ha sido sustituido por otro clock diferente pero equivalente, el hwclock?
Creo que es más bien lo
Date: Mon, 22 Mar 1999 13:00:46 +0100
From: Jose Aparicio Patino [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Organization: Universidad de Cadiz
X-Mailer: Mozilla 4.03 [es] (Win95; I)
To: ~ Miguel P.C. ~ [EMAIL PROTECTED]
Subject: Re: Configuración Xwindows.
Aqui en la UCA tengo instalada una S3
Tengo algunos ficheros ejecutables (los miro en
KDE y dice que lo son), pero cuando los intento ejecutar no funcionan o dicen
COMMAND NOT FOUND. Si los intento ejecutar con el SH me dice que no son
binarios. Como tengo que ejecutarlos? HAsta les he dado todos los permisos com
el CHMOD.
On Mon, Mar 22, 1999 at 01:04:41PM +0100, Manuel Trujillo wrote:
Después de pelearme un rato con el multicd, he podido hacer la actualización
de aquella manera... La cuestión es que, después de intentar instalar el
wmaker, me dá un error de Violación de segmento.
ugh.
Prueba moviendo
Hola. Soy nuevo en esto de Linux, y he decidido instalar la distribución
Debian 2.1 en mi computadora. Como no tengo los CDs me he propuesto
instalarlo poco a poco y descargando las partes que necesito.
Quisiera un poco de orientación para los pasos que debiera seguir, o si me
pueden decir si mi
El Mon, Mar 22, 1999 at 12:58:42PM +0100, Fernando dijo:
Jordi Roman Mejias wrote:
Fernando wrote:
...
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
...
Ojo lo que te encuentra (si no lo has modificado
El Sun, Mar 22, 1998 at 03:56:16PM +0100, Lucky dijo:
Tengo algunos ficheros ejecutables (los miro en KDE y dice que lo son),
pero cuando los intento ejecutar no funcionan o dicen COMMAND NOT FOUND. Si
los intento ejecutar con el SH me dice que no son binarios. Como tengo que
ejecutarlos?
El Mon, Mar 22, 1999 at 12:51:02PM -0400, [EMAIL PROTECTED] dijo:
Quisiera un poco de orientación para los pasos que debiera seguir, o si me
pueden decir si mi esquema esta bien:
Mi esquema sería el siguiente:
- Instalar sistema base del Debian. (Hecho).
- Configurar arranque doble W98/Linux
(Por favor, dad difusión a este anuncio entre quien pueda
estar interesado, y disculpad si os llega más de una vez)
---
UNA TARDE CON GNU/LINUX
Y EL SOFTWARE LIBRE
Alguien sabe como esta el efecto 2000 para Debian/Linux.
--
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
Jordi Román Mejiase-mail:
[EMAIL PROTECTED]
Autònoma ObertaServei de InformàticaUniversitat Autónoma
On Mon, Mar 22, 1999 at 07:40:34PM +0100, Jordi Roman Mejias wrote:
Alguien sabe como esta el efecto 2000 para Debian/Linux.
El kernel no tiene problemas (ningún Unix que se precie los tiene), así
como la mayoría de las aplicaciones, dado que el tiempo se mide en
segundos desde el 1 de
hola,tengo un problema al hacer un reboot o un halt en mi sistema.
cuando hago un reboot o un halt y empieza a desmontar todo (cada linea
del fstab)
al desmontar el raiz me dice que esta ocupado y no lo desmonta bien.
cuando rearranco el sistema me fuerza el chekeo..
alguien sabe
On Sun, Mar 21, 1999 at 05:41:42PM +0100, Andres Seco Hernandez wrote:
¿Alguien me puede aclarar si en Debian no hay clock de linea de comando
o es que no tengo montado algun paquete importante? ¿o simplemente
ha sido sustituido por otro clock diferente pero equivalente, el hwclock?
Debian
Hola a todos.
Tengo una duda con las versiones de librerias:
Resulta que me pongo a instalar libgnome31_0.99.4-2.deb y me dice que
[]
libgnome31 depends on libglib1.1.13 (= 1.1.13-1); however:
Package libglib1.1.13 is not installed.
libgnome31 depends on libgtk1.1.13 (= 1.1.13-1);
On Tue, Mar 23, 1999 at 12:22:40AM +0100, Juan Carlos Muro wrote:
Hola a todos.
Tengo una duda con las versiones de librerias:
Resulta que me pongo a instalar libgnome31_0.99.4-2.deb y me dice que
[]
libgnome31 depends on libglib1.1.13 (= 1.1.13-1); however:
Package libglib1.1.13 is
Salve,
Estava comecando a instalar e a compilar as lib's necessarias em suas
devidas ordens que ocorreu o certo problema com a lib libungif-3.0.
erro
#---
Libraries have been installed in:
/usr/local/lib
add LIBDIR to the
Leia em http://www.debian.org/~jim/debian-gtk-gnome/README sobre o Gnome
e Enlightenment mais novos na Debian.
Boa diversão! Paulo Henrique
Quoting Nelson Novaes Neto ([EMAIL PROTECTED]):
Salve,
Estava comecando a instalar e a compilar as lib's necessarias em
Ola Nelson,
Não conheco o Enlightenment, mas no arquivo /etc/ld.so.conf você deve
basicamente
adicionar
diretórios onde estão shared libraries, no seu caso provavelmente você deverá
adicionar a seguite
linha ao ld.so.conf:
/usr/local/lib
em seguida rode o ldconfig para que as alterções entrem em
Veja em http://www.debian.org/~jim/debian-gtk-gnome para maiores
informacoes sobre o ultimo gnome e enlightenment na Debian.
Abracos,Paulo Henrique
Quoting Eduardo Dias ([EMAIL PROTECTED]):
Ola Nelson,
Não conheco o Enlightenment, mas no arquivo /etc/ld.so.conf
Eu já utilizei uma meia dúzia de vezes. Nunca tive grandes problemas,
apenas coisas do tipo:
instalação do flagship: o script de instalação não é executado, sendo
neessário rodar na mão
applix 4.3: os dicionários não funcionam direito, eu preciso algum dia
configurar os diretórios direito.
Jose
Hi,
I just installed Debian Linux 2.1. I'm running on a 400MHz PII with 128M
RAM.
Everything seemed to install ok. However, when I reboot my machine it
says that xdm can't find a valid X configuration file and won't start. I
then log in as root and run xdm from the command line without
s == shaul [EMAIL PROTECTED] writes:
s What has to be written in .menu/mc so that mc will appear with colors when
s started from the menu in fvwm2 ?
s I currently have:
s [23:28:27 shaul]$ cat /usr/lib/menu/mc
s text Apps/Misc mc none Midnight Commander /usr/bin/mc
?package(mc):needs=text
On Sun, Mar 21, 1999 at 07:40:09PM -0500, Richard Heller wrote:
Next problem: Netscape. I downloaded Netscape Communicator 4.51 from
Netscape's homepage and installed it. The first time it ran, it said it
needed libg++.so.27. I finally found the library and installed it, but
now Netscape
Hi,
I downloaded netscape-base-45 and tried to install it. It says it depends
on netscape-base-4. Where is netscape-base-4? When I go to
ftp.debian.org under the non-free/binary-i386 tree and do 'ls */netscape*'
I get
-rw-r--r-- 1 ftp ftp371996 Oct 13 18:54
On Sun, Mar 21, 1999 at 08:03:51PM -0500, Richard Heller wrote:
Hi,
I downloaded netscape-base-45 and tried to install it. It says it depends
on netscape-base-4. Where is netscape-base-4? When I go to
ftp.debian.org under the non-free/binary-i386 tree and do 'ls */netscape*'
I get
On Mon, Mar 22, 1999 at 12:04:24AM +0100, Miquel wrote:
Hola a todos:
Recientemente, he instalado la versión Debian 2.01 Hamm y me he
encontrado con el problema de que no puedo configurar correctamente la
XFree porque tengo la APAC Intel 740A. He leido todos los mensajes
referentes
On Sat, Mar 20, 1999 at 02:25:52PM +, Nuno Carvalho wrote:
Hi,
I had installed lastest jdk1.1 package on my system but i'm unable to
get javac working !
ii jdk1.1 1.1.7v1a-2 JDK 1.1.x (Java Development Kit) -
Runtime o
ii jdk1.1-dev 1.1.7v1a-2 JDK 1.1.x (Java
On Sat, 20 Mar 1999, Christian Dysthe wrote:
I am running Netscape 4.5 under Debian (hamm). What I need is to be able is to
open different Messenger profiles with different mail folders, different
From addresses and different pop/smtp servers. Since Messenger isn't a multi
account email
Hi,
Well, I guess I was wrong about resolving my problem with my printer.
I
tried the HPLJ4L filter and it worked, unfortunately not quite as well as I
thought. Apparently it prints up very nicely. Only problem is that when
it gets to the end of the file it cuts off the last page.
I've noticed something over the past few days:
When I switch from my KDE session to the console using CTL-ALT-F1, sometimes
the background of the console (the text positions that DON'T have characters
in them) are given the ASCII block character. All spaces and unused positions
are fill with
Hi,
I somehow managed to get things in an annoying state. I've been trying to
install kde. I got the .deb files from the kde site and tried to install
them. Somewhere along the line things got screwed up. I had the wrong
version of qt installed (I had 1.40 and kde required 1.42) so things
Hi,
I've been running Debian 2.0 happily until earlier this evening, when I
ran dselect to upgrade my current packages. After retrieving and
attempting to install the upgraded packages, however, something royally
screwed up and now I get a can't open libncurses.so.4 - no such file or
directory
Greetings,
This is an annoucement of the first draft of a new piece of
documentation entitled Installing Debian GNU/Linux 2.1 on a Compaq
Presario 1210 laptop. (Unweildy but accurate name, I know.)
The document is currently availible at:
http://members.tripod.com/~pibble/laptopnotes.html
It
Hello all,
Just a quick one, I am trying to get netscape 4.5 going on slink, it seems
to need libg++ 2.7, the old libs version on slink is 2.8.
Is this on hamm and will it do any damage installing it? If not, where can
I get it in a .deb?
Thanks.
Have a look at /usr/lib/texmf/doc/latex/graphics where on my tetex
distribution the following files have a lot of information:
-rw-r--r-- 1 root root 1619126 Dec 17 1997 epslatex.pdf
-rw-r--r-- 1 root root 320628 Mar 17 1998 grfguide.ps
Johann
On Mon, 22 Mar 1999, Sami
Hi All:
I am a new comer in Linux. I managed to install the Linux. My problem is
that I do not know how to configure the Network Card.
I have a Pentium 2, 64MB RAM and the Network card is Novell NE 2000.
Where do I get a driver ?
How do I configure and install it ?
Thank in advanced
Ilan Kasan
Hello all,
Just a quick one, I am trying to get netscape 4.5 going on slink, it seems
to need libg++ 2.7, the old libs version on slink is 2.8.
Is this on hamm and will it do any damage installing it? If not, where can
I get it in a .deb?
I think
Guido A.J. Stevens wrote:
To follow up on this thread: how do I configure sound? When running
make menuconfig for the kernel, I'm not being asked for irq or dma
settings. Trying to pass command line arguments, I must be doing
something wrong:
wiz:~# modprobe sound irq=10
Hi,
I operate a cluster of diskless linux PCs using debian hamm. It works quite
well and i can say that debian causes the least problems with diskless machines
(tried SuSe an Redhat too).
However i was wondering about /var/lib/dpkg. Normally, in a diskless cluster,
every client gets its own copy
Hi
I have add several aliases to my .bashrc file ,but the file would not
be consulted while starting up.
What I am doing wrong
Regards
Mans Joling
Thank you all!
I've fixed the C program. Now I obtain the 7200 names *.uv.es for IP
addresses 147.156.*.* in a few minutes and in a file which I can grep,
sort, less, atp and lpr.
--
Conrado Badenas (Assistant Lecturer)
Department of Thermodynamics. University of Valencia
c/. Doctor Moliner, 50
Greetings--
I just made an attempt at upgrading my installed libc6 using
libc6_2.0.7.19981211-6.deb. I have a 2.0 complete install, but I was
going to try GnuCash, which requires guile 1.3, which requires a few
things that are newer than Deb2.0.
Anyway, it didn't go so well, apparently, since
Hi
I have add several aliases to my .bashrc file ,but the file would not
be consulted while starting up.
What I am doing wrong
You need to put them in your .bash_profile file, and you need to make
sure you are running a `login shell'. To get a login shell in an xterm,
you need to specify
Mans Joling dixit:
Hi
I have add several aliases to my .bashrc file ,but the file would not
be consulted while starting up.
What I am doing wrong
Regards
Mans Joling
I went through that recently; if you put them in .bashrc, then that's the
configuration for bash as an interactive shell,
Hi,
I have installed 'ggiheretic' and 'vgaheretic'. When I first started one of both
on the console I have been told that /dev/fb0 was missing. I have created it
with 'MAKEDEV framebuffer'. Now I get the message
display-fbdev: Couldn't open framebuffer device /dev/fb0: Operation not
supported by
I am looking for somebody selling Debian CD sets containing beside the
official images the non-free (the part which is freely redirstributable)
and
especially nonUS. Cheapbytes announced the nonfree section, but they do
not
ship nonUS.
try www.linuxmall.com
Of course, no US-based vendor is going to ship non-US to Rainer who's
domain is .de; that's the whole point of non-US.
you sure? I thought they wouldn't ship non-US to someone whose domain is a
US based one. For instance, pgp, from outside the US we need to get it as
pgp-i from non-US,
On Mon, Mar 22, 1999 at 12:45:27PM +0100, [EMAIL PROTECTED] wrote:
Of course, no US-based vendor is going to ship non-US to Rainer who's
domain is .de; that's the whole point of non-US.
you sure? I thought they wouldn't ship non-US to someone whose domain is a
US based one. For
Greetings-
In a previous message, I described my recent libc6 drama and how I
backed out of it.
I notice now that when I boot up my machine, that root is logged in (as
in, sitting in /root logged in and everything) right before xdm runs.
I have never noticed this before... this does not seem
Greetings-
In a previous message, I described my recent libc6 drama and how I
backed out of it.
I notice now that when I boot up my machine, that root is logged in (as
in, sitting in /root logged in and everything) right before xdm runs.
I have never noticed this before... this does
On Mon, Mar 22, 1999 at 12:13:52 +0100, Armin Wegner wrote:
display-fbdev: Couldn't open framebuffer device /dev/fb0: Operation not
supported by device
What does this mean?
Most likely that you don't run a 2.2.x kernel, or run a 2.2.x kernel without
framebuffer support compiled in.
HTH,
Ray
Just found it:
In /etc/inittab
# This line is special for the Debian installation system.
# This file will be replaced when installation completes.
1:2345:respawn:/bin/login root /dev/tty1 /dev/tty1 21
# 1:23:respawn:/sbin/getty 38400 tty1
Since I fudged the install process, this didn't get
I have to admit, there is a bit of truth to this, alot of people just don't
have the time to read 18 different documents in 18 different locations. Man
pages, info pages, FAQs, HOWTOs, mini-HOWTOs, READMEs, INSTALL docs, package
descriptions... it is a bit daunting. I do feel that
On Sunday 21 March, Michael Beattie wrote:
ShadowGate:/root# smbmount //dahouse/c_on_dahouse /dahouse -U BW07442 -P
shadowgate.com -I 192.168.0.10
mount error: Operation not supported by device Please look at
smbmount's manual page for possible reasons
I looked at
Hi All:
I am a new comer in Linux. I managed to install the Linux. My problem is
that I do not know how to configure the Network Card.
I have a Pentium 2, 64MB RAM and the Network card is Novell NE 2000.
I used modconf and selected the ne or the
ne2k-pci drivers. I got the following error message:
I installed netscape 4.5 using the debian package. When I start I got this
message:
netscape
ERROR: /usr/lib/netscape/plugins/libnullplugin.so: undefined symbol:
FE_GetToplevelWidget
Cant load plugin /usr/lib/netscape/plugins/libnullplugin.so. Ignored.
ERROR:
Here is the error that was occurring when I attempted to reboot, as I
describe below:
/bin/sh: error in loading shared libraries
: undefined symbol: rl_ignore_some_completions_function
Dan wrote:
Greetings--
I just made an attempt at upgrading my installed libc6 using
Hi,
Just chiming in w/ a newbie question. I have an
Intergraph TD-3 (90Mhz) with 56Mb RAM and 2 \1Gb
SCSI-2 drives on an Adaptec AIC 7770 onboard. I'm
trying to install Linux on it and have only been able
to install w/ Caldera 1.2 so far but would like
instead Debian 2.1 (or 2.2). This is the
*- On 22 Mar, Mick Jagger wrote about ANNOUNCE: new documentation, Installing
Debian on a Compaq Presario Laptop
Greetings,
This is an annoucement of the first draft of a new piece of
documentation entitled Installing Debian GNU/Linux 2.1 on a Compaq
Presario 1210 laptop. (Unweildy but
On Mon, Mar 22, 1999 at 01:35:28PM +0100, J.H.M. Dassen wrote:
On Mon, Mar 22, 1999 at 12:13:52 +0100, Armin Wegner wrote:
display-fbdev: Couldn't open framebuffer device /dev/fb0: Operation not
supported by device
What does this mean?
Most likely that you don't run a 2.2.x kernel, or
Just a quick one, I am trying to get netscape 4.5 going on slink, it seems
to need libg++ 2.7, the old libs version on slink is 2.8.
If you ever need a specific file, usually a lib like that, use the bottom search
engine at www.debian.org/distrib/packages. I find it VERY useful and I have no
(Reading database ... 55600 files and directories currently installed.)
Removing kdebase ...
dpkg - warning: while removing kdebase, directory `/etc/kde' not empty so
not removed.
chmod: /etc/menu-methods/kde: No such file or directory
dpkg: error processing kdebase (--remove):
subprocess
I've been running Debian 2.0 happily until earlier this evening, when I
ran dselect to upgrade my current packages. After retrieving and
attempting to install the upgraded packages, however, something royally
screwed up and now I get a can't open libncurses.so.4 - no such file or
directory
Hi
I'm a former RedHat user and wonder how could I
manage links in rc.d directories? In RedHat there is
chkconfig and ntsysv programs which allows me in easy
way to customize what programs (daemons) to run
during boot time. Are there any simmiliar tools for
Debian?
Piotr Legiecki
I just completely upgraded to slink. I decided to use the apt method of
installation from dselect since ftp is no longer there. It seemd to work
well. Chose the packages and download while I slept, answered some config
questions before work this morning. My question is with the old ftp it aked
Hello.
I'm trying to make an ALS 100 Sound Device to work on a Linux machine.
Apparently, the card is recognized as a full-compatible SoundBlaster 16
card at the boot time,
and that is what it is.
The proc/dma and /proc/interrupts show it, but the /dev/sndstat and
the/dev/tkmixer
are not
On Mon, 22 Mar 1999, Ed Cogburn wrote:
P.S. Some programs I've tried since going to the 2.2 kernel no
longer have working sound. Sound in the mirrormagic game is now
broken, for example, but things like GNOME and emusic still work.
I can't get any midi players to work with by SB AWE-32
---BeginMessage---
[EMAIL PROTECTED] wrote:
What sound driver are you using? OSS (comes with kernel) or ALSA?
I'm using OSS. What's ALSA ? Is that the manufacturer's driver ?
Also, do
you have sound compiled in, or as module? Kernel version would help too.
I tried both, but none worked.
Hi: , I was under the impression that going from Hamm to
slink would enable me to use all my 80M of memory.
I am using kernel 2.0.36, with, in the /etc/lilo.conf
the first line append=mem=80M but only about 63 odd M
are recognized? Is it possible to overcome this?
Hi,
I have installed a 3c905b network card using modconf.
After linux starting up I see that he found him.
I have edit the host file and added the 2 ip adresses and look like
this
127.0.0.1 localhost
192.168.1.9 myhost
192.168.1.8 other
reboot
When I do a ping command ping other he still says
I think 2.0.36 was the first stable kernel to recognize more than 64M
automatically. Try it without the append= line. My systems recognizes
256M without the append= line in lilo.conf. Here are the first few lines
from dmesg:
Memory: sized by int13 0e801h
Console: 16 point font, 400 scans
On Mon, 22 Mar 1999 [EMAIL PROTECTED] wrote:
Of course, no US-based vendor is going to ship non-US to Rainer who's
domain is .de; that's the whole point of non-US.
you sure? I thought they wouldn't ship non-US to someone whose domain is a
US based one. For instance, pgp, from outside
I also agree with the idea of having a single starting point for
documentation. And something I kind of wonder about - why are there always so
many documents for a given program? Can't they be combined into one document
devided into sections? With info pages, you can get to any specific section
On Mon, 22 Mar 1999, Person, Roderick wrote:
I just completely upgraded to slink. I decided to use the apt method of
installation from dselect since ftp is no longer there. It seemd to work
well. Chose the packages and download while I slept, answered some config
questions before work this
Hi All:
I am a new comer in Linux. I managed to install the Linux. My problem is
that I do not know how to configure the Network Card.
I have a Pentium 2, 64MB RAM and the Network card is Novell NE 2000.
I used modconf and selected the ne or the
ne2k-pci drivers. I got the following error
[EMAIL PROTECTED] writes:
Force of habit, I suppose Maybe it's time to remove the man pages for
those programs that also have info pages, eh?
Don't remove the manpages. And don't start an info vs. man war, either,
please!
--
+- pgp key available
In a message dated 3/22/99 10:21:50 AM Central Standard Time, [EMAIL PROTECTED]
labs.com writes:
Force of habit, I suppose Maybe it's time to remove the man pages for
those programs that also have info pages, eh?
Don't remove the manpages. And don't start an info vs. man war,
Mans Joling wrote:
Hi,
I have installed a 3c905b network card using modconf.
After linux starting up I see that he found him.
I have edit the host file and added the 2 ip adresses and look like
this
127.0.0.1 localhost
192.168.1.9 myhost
192.168.1.8 other
reboot
When I do a ping
Is there a CVS like server for only binary files? It could be much simpler all
I realy need is a secure way of checking in and out binary documents over the
net, and version control. :
--
*--* Mail: [EMAIL PROTECTED]
*--* Voice: 425.739.4247
*--* Fax: 425.827.9577
*--*
[EMAIL PROTECTED] writes:
I've no intention of starting a flame war - but the fact remains, if the man
pages are no longer being supported by developers, there's no sense including
them in the man pages package. It just adds to the confusion.
Not true. If the manpage says this manpage is
On Mon, Mar 22, 1999 at 15:12:32 +0100, Armin Wegner wrote:
That's it. How to compile framebuffer support in the kernel? Where to get
the sources?
It's included in the regular linux 2.2.x sources, just be sure to say yes to
the question whether you want to be prompted about experimental
Bob Nielsen dixit:
On Mon, 22 Mar 1999 [EMAIL PROTECTED] wrote:
Of course, no US-based vendor is going to ship non-US to Rainer who's
domain is .de; that's the whole point of non-US.
you sure? I thought they wouldn't ship non-US to someone whose domain is a
US based one. For
Ok, I know how to use Debain packages, but which ones are needed for a semi
full install that will allow use of either KDE or GNOME? If someone can
point to a walkthrough of installation for Debain, or just some advice,
it'd be greatly appreciated.
Well... since you ask in debian-user then the best linux distribution is the
Debian 2.1 slink that you can find in Italy at ftp.unina.it, most of the the
documentation about linux is in the Linux Documentation Project (LDP) at
http://sunsite.unc.edu/LDP
For the graphical interface you just have
On Sat, 20 Mar 1999, Ralph Winslow wrote:
I recently bought a 64 Mb DIMM and installed it on my Intel i430VW
motherboard.
[...]
Well, one thing you can try is booting with a mem=64M option. With
LILO, you hit shift to get the prompt, then do linux mem=64M (replace
linux with whatever you
On Fri, 19 Mar 1999, Hartmut Schmude wrote:
Recently I tried to install DEBIAN 2.0 -kernel 2.0.34 - on an
old 386 machine with the following configuration:
mainbord 386 with CT 82C206 / 301 / 302 Chipset
no copro
ISA bus only
8 Meg memory
Adaptec 1542 C
2 SCSI Disks with 240 M and 4.3 G
Martin Waller wrote:
I've put together an old 486 from bits, and am trying to install Debian
(hamm) on it.
If I use the boot diskette (doesn't support CD bootup), the bootup stops
with 'Can't open initial console', and if I try the rescue disk, it just
says:
Kernel panic: Free list
Which module does net-pf-19 refer to?
Mike
--
Mike Merten
[EMAIL PROTECTED]
ICQ# 28460680
On Mon, 22 Mar 1999 [EMAIL PROTECTED] wrote:
Bob Nielsen dixit:
On Mon, 22 Mar 1999 [EMAIL PROTECTED] wrote:
Of course, no US-based vendor is going to ship non-US to Rainer who's
domain is .de; that's the whole point of non-US.
you sure? I thought they wouldn't ship non-US
Per-Olof Widstrom wrote:
I have seen that people get the advise to add a line in lilo.conf that
tells how much RAM the system have, if they have more then 64 mb, and that
it is possible to have a larger harddirve then the BIOS can handle. I just
would like to ask two simple questons about
Hi John,
you wrote on Sun, Mar 21 1999:
Sounds likely, but any modem that does so is defective. The modem should
ignore +++ unless it is preceded and followed by a pause.
It normally does, but IMHO the pause is not required. Anyway, the
default value (US-Robotics/3Com) in Register S02 is 043
Having updated libc6, I didn't know whether a reboot was in order, since
that is a fairly important library for just about everything. Well,
this was a bad idea, since my machine hung rebooting, and then nothing
would run once the kernel finished starting. Couldn't log in, rescue
disk
1 - 100 of 150 matches
Mail list logo