'As 9:40 de 8 May 99, Gleydson enviou o texto que respondo abaixo.
Ola'!
(...) Aconteceu que, da última vez utilizei o comando fsck.ext2 com a opção
-f.
Ele encontrou vários problemas com o sistema de arquivos e todos eles
foram corrigidos para o diretório lost+found. Para minha surpresa,
Bom, o que eu posso falar para vc é que pode ter ocorrido algum
problema logo na parte de particionamento do disco. Eu tive um problema
desse tipo há alguns anos (hehe :) quando a minha partição de swap, por
algum motivo alheio ao meu conhecimento, se apresentava maior do que
realmente
Andre wrote:
3) Why does debian say 'only the root can do that' when I type the line below:
$ mount /dev/fd0 (or any other floppy drive)
I've been following this thread, and I haven't noticed this answered
completely yet.
I have the following lines in /etc/fstab:
# /etc/fstab: static
On Sat, May 08, 1999 at 10:06:29PM +0200, J Horacio M G wrote:
Sorry to take back on an old issue.
Since Ctrl+Alt+Fn can switch from X to almost any V.C., and supposing
you can then take on any task under the command line, I'm seeing no real
point in removing xdm or preventing it from
On Sat, May 08, 1999 at 03:33:30PM -0500, Brent Metzler wrote:
I noticed no one else replied to this, so I'll give it a stab.
I had a similar problem with the mouse. The problem seemed to be caused by
running
gpm, the command-line mouse proggie, before X. This apparently causes
On Sat, May 08, 1999 at 12:45:44AM -0400, Arcady Genkin wrote:
Problem: I would like to go a step further and set this feature to
work even wiht graphical login screen. So that if I boot up my
computer, but don't want to login, the screen would be blanked after
certain time. Which script do I
I upgraded my computer from slink to potato and it wont print anymore.
Under slink it printed ok (terible quality, but its a dot matrix :( )
Only reson i can think about is the lines when it loads the modules:
lp: no IEEE1284 device found
lp using parport0 (polling)
from lpq i get a message:
Is it posible to make the use of deferent resolve.conf for deferent
providers automatic?
ie:
pon provider1 will use resolve.conf.provider1
pon provider2 will use resolve.conf.provider2
I've checked, and i do need different resolve.conf (deferent dns
numbers and a search line).
Thanx
I need the ability to write hebrew letters under aplications (such as
netscape). it doesn't neceserily need to be in the right direction.
under hebrew vim i can write hebrew without a problem.
I tried to remap the keboard in order to use hebrew letters under xterm
and netscape etc. The problem is
The other night, the power went out, and after it came back on, Debian 2.2
hangs on boot. I don't know wether my problem is related to that or the
kernel compile as listed below, but it sits forever on the line:
Parallelizing fsck version 1.14 (9-Jan-1999).
When I do a Ctrl-C, it mounts the
Reply-To:
A friend and I are trying to setup up a network of SuSE machines (they're his)
We have the ethernet cards setup and responding, we think we have picked the
right addresses (class C), netmask, etc. However we think the routing is our
problem, they all know they're IP addresses but we
I have two network cards (1 Intel etherexpress 16, 1 NE2000) in a debian
system. Both are detected on boot up and both are ifconfig'd. This system
will be used to connect my little LAN through IP masq to the Internet. For
various reasons, I am only able to have 1 IP, so that is why I am messing
okay, thanks for all the other help, now when I type this
make-kpkg --revision=test1 kernel_image
the kernel compiles it's little heart out ..until..
**Error Message**
/tmp/ccc05362: In function 'main':
/tmp/ccc05362(.text+0x42b): undefined reference to '__bzero'
make[2]: *** [tools/build] Error
Curiouser and curiouser - the files
http.us.debian.org_debian_stable_main_binary-i386_Packages
http.us.debian.org_debian_stable_non-free_binary-i386_Packages
in /var/state/apt/lists are identical (and contain what non-free should
contain). I can delete the files and run apt-get update, and the
Micha Feigin writes:
Is it posible to make the use of deferent resolve.conf for deferent
providers automatic?
You need to put a script in /etc/ppp/ip-up.d that replaces /etc/resolv.conf
with the one appropriate to the current provider, and another in
/etc/ppp/ip-down to restore resolv.conf.
Christoph Lange schrieb:
vorsichtwerbung
Guckt mal bei http://www.cul.de/freex/ vorbei (da bin ich webmaster). Die
zeitschrift freeX beschaftigt sich mit allen freien Unix-systemen, d.h.
auch mit den freien BSDs und den freien privatanwender-versionen von SCO und
Solaris. Der schwerpunkt
As I am a new user of Debian I have a couiple of Questions as to what
apps to get . I am not a couplete newbie but am still very new ( I know
how to use gzip and tar and can do most basic functions of a *nix
system) Here is my dilema after searching though several different dists
I have come to
THe Java Portion Of ICQ did not install correctly any I deas how I get
this to work ?
Each time my system runs fsck on reboot (when the disk reaches it's
mount count limit) the file system appears more fragmented. On the
last fsck run it reported 5.7% non-contiguous. Is this a problem and
if so what should I do?
===
Amateur Radio, when all else fails!
http://www.qsl.net/wa2mze
It's even less clear cut than that.
While in Netscape enter the following URL
about:mozilla
Don't forget that Netscape was Mozilla before it was Netscape.
Mozilla comes again.
On 6 May 99, at 10:23, Jerry Gardner wrote about Re: slink and
netscape/mozilla:
Ray writes:
Netscape
Actually, you need to insert the second or last CD of your multi-cd archive
first if you have more than one cd.. I don't know why but from the Debian
Installation Manual that's the correct way to roll..
On Sat, May 08, 1999 at 09:55:48PM +0200, Tony Schonfeld wrote:
hello ,
i've just
hi, I'm having trouble installing linux on my pc. I ran the install.bat and
setup the monitor and screen. Then it asked to partition my hard drive. I
selected ok but it came up with an error and returned to the main menu.
I have a compaq deskpro pc with a 1.2 gb hard drive. I partitioned it into
Can linux recognize a micro-channel nic? I know how to setup the kernel
to recognize an ISA/PCI nic, but does linux support mca cards? If so, how
would I configure the kernel to recognize the mca card? Would I treat it
just like an ISA card? TIA.
The kernel does do MCA... Just choose the option when you're compiling. I
know the 3c523 and 3c527 boards are listed as options also. Dunno about
any other MCA boards.
On Sat, 8 May 1999, Robert Rati wrote:
Can linux recognize a micro-channel nic? I know how to setup the kernel
to recognize
I'm having problems with dhcpd. For somereason no matter what I change
dhcp sets my hostname to dhcpc1
or something. I've changed it in the hostinfo-eth0 file to be a
different name i've change /etc/hosts. I'm don't know where dhcp is
getting this hostname and if there is a way to fix it? Any
On Thu, 6 May 1999, Robert King wrote:
Hi All,
I compiled sysutils myself because procinfo complains that it needs to
be compiled to display all IRQs. I unpacked the debian source file and
used debian/rules binary to make a binary. When I installed the .deb using
dpkg (which happens
On Sat, 8 May 1999, Lawrence Wickline wrote:
As I am a new user of Debian I have a couiple of Questions as to what
apps to get . I am not a couplete newbie but am still very new ( I know
how to use gzip and tar and can do most basic functions of a *nix
system) Here is my dilema after
In foo.debian-user, you wrote:
On Sat, 8 May 1999, Lawrence Wickline wrote:
Also need something that will make .gifs (Gimp doesn't seem to do this)
Haven't found one yet myself... I wouldn't mind a decent package... I'll
probably just wait until Wine gets better and run Paint Shop Pro...
On Sun, 9 May 1999, Mitch Blevins wrote:
In foo.debian-user, you wrote:
On Sat, 8 May 1999, Lawrence Wickline wrote:
Also need something that will make .gifs (Gimp doesn't seem to do this)
Haven't found one yet myself... I wouldn't mind a decent package... I'll
probably just wait
P.S on a happy note
I got Netscape to work Finaly!
and TinTin++ rocks (please include it in a furture debian release. They
are working on it again finally and I would love to be able to apt-get
it as they improve it. Version 2 coming soom:)
Thats good to know... btw - what's
hi list !
ive looked all over freshmeat and cgi-resources.com and i just cant seem to
find a some cgi that allows a user in ur system to change his/her password
thru some web interface, that is, w/o havnig to telnet to the server and
manually invoking passwd.
anyone have any ideas where to
Try modprobe ppa.. Chances are you have conflicting IRQs. Look at your
/proc/interrupts and make sure everything is correct. Make sure you don't
have ldp running and that you also have removed your lp module. Good luck.
Hm, there shouldn't be any conflicting IRQs, since the ZIP is a
A while back I noticed that there was a number 2
in some of my directories. Initially my first reaction
was to delete them as I had not created them. Even this
took a while as they were actually named 2space ie '2 ',
which was not obvious to me.
Last week I discovered some more
Hi,
My anwser to this question is to compile the scanner driver as the
module.
But I am not sure. Any other suggestions??
Thanks.
- Forwarded message from CyrusP [EMAIL PROTECTED] -
From: CyrusP [EMAIL PROTECTED]
To: Shao Zhang [EMAIL PROTECTED]
Date: Sun, 9 May
I have a small local mirror of unstable of all the packages I have installed.
I make this mirror available to other people on the lan. As the unstable
packages keep being updated I end up with different versions of the same
packages and when i run dpkg-scanpackages I get '! Package blah is
Hi,
I know both acm and abuse are good games in Linux. But I can never get
them to work
in my slink box. I am about to delete them!!
If I run abuse.console, it complains about my mouse. I tried to edit
/etc/vga/libvga.config
but never succeeded. Never Mind.
I think the module name is general scsi support.
Hope this helps you.
Lennie.
On Sun, 9 May 1999, Shao Zhang wrote:
Hi,
My anwser to this question is to compile the scanner driver as the
module.
But I am not sure. Any other suggestions??
Thanks.
-
Micha Feigin [EMAIL PROTECTED] wrote:
Is it posible to make the use of deferent resolve.conf for deferent
providers automatic?
Yes. What I do is create files relevant to the different providers I use
- there are three essential files for me: /etc/resolv.conf,
/etc/chatscrips/provider and
Hi,
Since I upgrade from 2.0.36 to 2.2.7, Linux do not recognize my CD-writer
anymore !?
SCSI card is a TEKRAM DC-390 simple adapter (fast-SCSI I guess)
Id #4: Pioneer CD-ROM DR-U16S (always recognized)
Id #5: Yamaha CRW4416S (no more recognized)
No more devices on other Ids
help me
--
per_adua32 wrote:
A while back I noticed that there was a number 2
in some of my directories. Initially my first reaction
was to delete them as I had not created them. Even this
took a while as they were actually named 2space ie '2 ',
which was not obvious to me.
Hi all:
I had a CDR that was working perfectly. I bought a SCSI CD-ROM, and
when I connected it the CDR stoped working. When I boot up the devices
are displayed this way:
Device No. Adapter SCSI ID LUN
81 0 2 0 Pioneer DR966 ... (The CD-ROM)
82 0
What is the error?
On Sat, May 08, 1999 at 11:40:25PM -0400, Yong-Ho Ham wrote:
hi, I'm having trouble installing linux on my pc. I ran the install.bat and
setup the monitor and screen. Then it asked to partition my hard drive. I
selected ok but it came up with an error and returned to the
Just modprobe ppa and e-mail the output to this list. There should be an
interrupt here for your parallel port, and yes, the parallel port can have
conflicting irqs with other devices. Do that and let me see the output.
On Sun, May 09, 1999 at 09:55:51AM +0200, Debian Mail wrote:
Try
Phillip Deackes [EMAIL PROTECTED] wrote:
It is a really simple matter then of having an executable script for
each provider which copies the files around. Here is an example for
one
IP, eidosnet:
cp /etc/resolv.conf.eidosnet /etc/resolv.conf
cp /etc/chatscripts/provider.eidosnet
JHMG == J Horacio M G [EMAIL PROTECTED] writes:
JHMG /var/spool/exim/input/ and /var/spool/exim/msglog/. I believe
JHMG Exim complained about |exec and IFS (I tried both with
JHMG .forward). This is what I had in my ~/.forward:
JHMG |exec /usr/bin/procmail
In /etc/exim.conf, you have to
On Sun, 9 May 1999 [EMAIL PROTECTED] wrote:
Actually, you need to insert the second or last CD of your multi-cd archive
first if you have more than one cd.. I don't know why but from the Debian
Installation Manual that's the correct way to roll..
On Sat, May 08, 1999 at 09:55:48PM +0200,
Hi,
I just installed the potato version of wine and have put my window
mount point into fstab in order to run the wineconf program.
Unfortunately I keep getting an error saying Cannot read ./wine.ini and
I don't know how to fix this problem, can anyone help me? Thanks for
any help.
On Sat, 8 May 1999, J Horacio M G wrote:
Brian Servis dixit:
~
~ To stop xdm from starting in Debian 2.1 you have several options:
~
~ 1) remove the xdm package
~ 2) put an exit 0 at the top of the /etc/init.d/xdm script
~ 3) remove the symlinks in rc?.d to xdm with: update-rc.d -f
Peter Ludwig wrote:
On a side note I will be needing a Database to connect a website to
fairly soon. Any suggestions (I am leaning towards mySQL but I would
like a GUI interface to work in if possiable)
Someone is ahead of you here, I do believe... There is a GUI interface for
it, but
On Sat, 8 May 1999, MR wrote:
I have two network cards (1 Intel etherexpress 16, 1 NE2000) in a debian
system. Both are detected on boot up and both are ifconfig'd. This system
will be used to connect my little LAN through IP masq to the Internet. For
various reasons, I am only able to have 1
Hi all!
I'd like to use the perl script to generate the signature for my mail messages,
depending on the addressee. For example: when the address ends with .pl the
signature is in Polish etc.
Now I have the signature var set to ~/.generate_signature|.
Is it possible to transfer addressees' list
On Sat, May 08, 1999 at 01:02:24PM -0400, William R Pentney wrote:
Is there any way I can get a newer version of GNOME than the 1.0.3 in the
slink staging area without upgrading to potato? Do the newer GNOME
packages really use glibc2.1?
i just upgraded to potato last night and the
On Sat, May 08, 1999 at 07:49:26PM -0700, Kenneth Scharf wrote:
Each time my system runs fsck on reboot (when the disk reaches it's
mount count limit) the file system appears more fragmented. On the
last fsck run it reported 5.7% non-contiguous. Is this a problem and
if so what should I do?
I compiled sysutils myself because procinfo complains that it needs to
be compiled to display all IRQs. I unpacked the debian source file and
used debian/rules binary to make a binary. When I installed the .deb using
dpkg (which happens without complaint and the programs work),
Wayne Topa wrote:
Subject: NEW Samba + Printer woes
Date: Sat, May 08, 1999 at 05:13:32PM +
In reply to:Jose L Gomez Dans
Quoting Jose L Gomez Dans([EMAIL PROTECTED]):
Hi!
I've finally installed samba + lprng on an ageing i386. I have two
parallel ports,
Hello,
Is there someone using moneydance 2.0? I have downloaded it, installed jdk1.1
.deb, and then I ran the installer (sh install.bin) and... nothing happens. It
just ask which java to use a choose it and them it gives the prompt.
I succeded installing it under Solaris, so I may have to
Hi,
I'm unable to get my linux box working cause I'd broken glibc2.1 !
I'd an older rescue disk (Debian 1.3) and I can mount my linux box
meanwhile I also have lastest libc6-2.1 package on it but i'm unable to
get dpkg working ! :(
Is there any good rescue disk or what should I do ?
Thanks.
Peter Ludwig wrote:
On Sat, 8 May 1999, Lawrence Wickline wrote:
As I am a new user of Debian I have a couiple of Questions as to what
apps to get . I am not a couplete newbie but am still very new ( I know
how to use gzip and tar and can do most basic functions of a *nix
system) Here
Peter Ludwig wrote:
On Sat, 8 May 1999, Lawrence Wickline wrote:
As I am a new user of Debian I have a couiple of Questions as to what
apps to get . I am not a couplete newbie but am still very new ( I know
how to use gzip and tar and can do most basic functions of a *nix
system) Here
I recently downloaded and installed mozilla at the request of someone on
this list.
The .debs were libnspr21_19990415.M4-1_i386.deb and
mozilla_19990415.M4-1_i386.deb.
I installed them on my unstable system running 2.2.1 using dpkg -i.
When I run
mozilla from an xterm I get
nsComponentManager:
1 - My X server since installation starts automaticly... I don't want it to
auto - start. How do I take that option out?
2 - Is there any kind of autoexec.bat at Debian? Where?
3 - How do I mount my Windows file system at hda1? Then so it'll mount every
time I log, I'll have to add the mount
Thanx to olly,
when he mentionned a possible mistake to do with redirection
I pretty much guessed what that the problem was. In the file
/etc/profile I have an alias that runs the following command:
alias upD.='updatedb --prunepaths=/var /cdrom /tmp /proc /mnt
/dev/null 12
\'
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 9 May 1999 15:25:11 +0100, Paulo J Matos aka PDestroy wrote:
2 - Is there any kind of autoexec.bat at Debian? Where?
System wide - /etc/init.d, /etc/cron.*
3 - How do I mount my Windows file system at hda1?
man mount
1 - My X server since installation starts automaticly... I don't want it to
auto - start. How do I take that option out?
I'm guessing you mean xdm. If your system is like mine, you'll have a file
/etc/X11/config. In their will be a line 'start-xdm' which you should
replace with 'no-start-xdm'.
I want to set up debian on a dos partition using umsdos, can anyone give me
step by step instructions on how to do this? Is there a way to do this from
the installer? If not any thoughts about adding it?
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Paul L. McNeely ([EMAIL PROTECTED]) ICQ#
Peter Ludwig wrote:
On Sun, 9 May 1999, Mitch Blevins wrote:
In foo.debian-user, you wrote:
On Sat, 8 May 1999, Lawrence Wickline wrote:
Also need something that will make .gifs (Gimp doesn't seem to do this)
Haven't found one yet myself... I wouldn't mind a decent package...
Khalid EZZARAOUI wrote:
Peter Ludwig wrote:
On a side note I will be needing a Database to connect a website to
fairly soon. Any suggestions (I am leaning towards mySQL but I would
like a GUI interface to work in if possiable)
Someone is ahead of you here, I do believe...
On Mon, May 10, 1999 at 12:47:04AM +1000, Robert Norris wrote:
1 - My X server since installation starts automaticly... I don't want it to
auto - start. How do I take that option out?
I'm guessing you mean xdm. If your system is like mine, you'll have a file
/etc/X11/config. In their will
Luis M. Garcia wrote:
On Mon, May 10, 1999 at 12:47:04AM +1000, Robert Norris wrote:
1 - My X server since installation starts automaticly... I don't want it
to
auto - start. How do I take that option out?
I'm guessing you mean xdm. If your system is like mine, you'll have a file
On Sat, 8 May 1999, Lawrence Wickline wrote:
What happened? Did you get an error message, and if so, what was it? I had
to change the shell script that loaded it up a bit when I installed it -
had to add classes.zip in my JDK diretory to the class library
parameter.
- bill
THe Java Portion Of
When comparing a cheap scanner (under $100) such as the Plustek 96xx
series with a medium price scanner such as the so-called business-class HP
5200c, I can't tell what claims are due to the scanner hardware itself, or
simply the bundled software. Obviously, the bundled software does a Linux
user
Just a note of thanks to John Foster for his help in providing me with a
well-documented replacement program for crypt.
Thanks, John!
Kenward Vaughan
Subject: Re: update-menus, does it work?
Date: Sat, May 08, 1999 at 03:32:22PM -0400
In reply to:Andrew Chung
Quoting Andrew Chung([EMAIL PROTECTED]):
?package(gtcd):needs=x11 icon=none section=Apps/Sound \
title=Gtcd command=/usr/X11R6/bin/gtcd
but it still doesn't
Anyone know of a spot where I can get common or rare error messages for
kernel(2.2.5) compiles?
Thanks,
Jayson S. Baird
Luminous beings are we, not this crude matter -- Yoda
[EMAIL PROTECTED]/[EMAIL PROTECTED]
Russian: [EMAIL PROTECTED]
Hi,
I have X installed in my new Debian 2.1.3 (Slink). Sometimes X stops and an
error occurs. It says:
Fatal Server Error:
Hung in ApmSync()
It seems that when this function is called it hungs my X (it seems that this
function is important because it happens often and then I have to reboot
linux
Paulo Jose da Silva e Silva [EMAIL PROTECTED] wrote:
Is there someone using moneydance 2.0? I have downloaded it, installed
jdk1.1
.deb, and then I ran the installer (sh install.bin) and... nothing
happens. It
just ask which java to use a choose it and them it gives the prompt.
I
Since you say the CDR is terminated, I'm assuming it's last on the SCSI
chain. The Term Power jumper on the CDR is the jumper that sets
termination on or off on the device. With that jumper shorted, the CDR
is a terminating device on the chain, so in your current setup, it
should be the last
Hi!
try to put my hd in standby/sleep, but it dose not
work so well. When I type hdparm -y/Y /dev/hda I can
hear my hd spindown for 2-5 sec and then it goes back
to normal mode! Does anyone know why it does not stay
in standby/sleep mode ? (have a IBM Deskstar 10,1 7200Rpm)
--
//thx Johan
Subject: Re: NEW Samba + Printer woes
Date: Sun, May 09, 1999 at 02:36:22PM +0200
In reply to:Michael Steiner
Quoting Michael Steiner([EMAIL PROTECTED]):
The printcap is designed to work with a remote printer, e.g. I use such
an entry for a hplj with a build-in ethernet
At 01:58 PM 5/9/99 +0200, you wrote:
On Sat, 8 May 1999, MR wrote:
I have two network cards (1 Intel etherexpress 16, 1 NE2000) in a debian
system. Both are detected on boot up and both are ifconfig'd. This system
will be used to connect my little LAN through IP masq to the Internet. For
to remove xdm :
try :
Ctrl+R in the xlogin
or as root, in shell :
switchdm
Hello!
Does somebody know the simple way to count traffic bytes in/out debian
server?
I've been reading a lot online that emacs takes up a lot of space and
sometimes causes strange things to happen on the screen and within debian's
setup. One online message jokingly hinted that maybe microsoft created
emacs due to the multiple issues that occur when running emacs.
I plan on
Here's a LARGE link to 1,370 debian files/apps via hotbot search (many of
them are at www.debian.org). You may need to cut and paste the URL below if
it is altered by my email writer before reaching you:
http://hotbot.com/?clickSrc=searchMT=submit=SEARCHSM=MCLG=anyAM0=MCAT0
Jean-Yves BARBIER wrote:
Todd 'Snoopy' Harper wrote:
G'Day,
I'm currently still running hamm, and I've installed Netscape 4.51
using the installer package (4.0-12). When I try to compose a new
message in Messenger, I get a subprocess diagnostic dialog box
Hi,
I think it could
Using mutt I'd like to change from Maildir to mbox. What should I do?
1. Which type of mbox_type should I set?
2. set folder=~/Maildir # where i keep my mailboxes
what to be in this case?
3. set sendmail=/var/qmail/bin/qmail-inject # how to deliver mail
Hi,
A short question:
Does anyone know how to compile a debian source package into a binary?
--
Min Xu
City College of NY, CUNY
Email: [EMAIL PROTECTED]
[EMAIL PROTECTED]
Tel:(O) (212) 650-6865
(O) (212) 650-5046
Andr Bell [EMAIL PROTECTED] wrote:
I've been reading a lot online that emacs takes up a lot of space and
sometimes causes strange things to happen on the screen and within debian's
setup [..]
do you know if there any dangers in me running dselect
on emacs packages?
As far as I know, there are
I've been reading a lot online that emacs takes up a lot of space and
sometimes causes strange things to happen on the screen and within debian's
setup. One online message jokingly hinted that maybe microsoft created
emacs due to the multiple issues that occur when running emacs.
I probably
Hello,
Can
non-deb
source
pkgs be
compiled
and
installed
with
dpkg (like
the kernel
sources)?.
Thank you
Tony Schonfeld writes:
On Sun, 9 May 1999 [EMAIL PROTECTED] wrote:
Actually, you need to insert the second or last CD of your multi-cd
archive first if you have more than one cd.. I don't know why but from
the Debian Installation Manual that's the correct way to roll..
That's correct.
here
I updated some of my packages to the unstable versions to try out the latest
gnome packages. I subsequently removed the gnome-packages. But now I
the following message when trying to complie a C++ program:
bash-2.01$ g++ -o ass4 assign4.cpp
BUG IN DYNAMIC LINKER ld.so: dynamic-link.h: 57:
It's pretty easy, usually.
1) Download the source components into the directory of your choice.
There should be either two or three files: *.orig.tar.gz, *.dsc, and
*.diff.gz (not present if it's a native Debian package).
2) Enter the command dpkg-source -x packagename.dsc. This will
Jake Bishop wrote:
Hello,
Can
non-deb
source
pkgs be
compiled
and
installed
with
dpkg (like
the kernel
sources)?.
Thank you
No, dpkg only knows how to handle Debian packages that end in
'.deb'. The kernel sources are in '.tar.gz' format which requires
the use of the
On Sun, May 09, 1999 at 03:15:20PM -0400, [EMAIL PROTECTED] wrote:
Hi,
A short question:
Does anyone know how to compile a debian source package into a binary?
If you have the source package, which usually consists of three files,
the *.dsc, the *.orig.tar.gz, and the *.diff.gz, you need
Could someone please tell me how to get octave to print graphs
(preferably to a file). I've tried RTFM, but it's not really helping me
here.
Thanks in advance
Rich
Hi All!
When I send mail from my home, the message header contains the sender
address from my fake home domain ([EMAIL PROTECTED], nasz.dom is my
unregistred local domain with IP's 192.168.*.*).
This results in rejecting of my mail by many addressees (error:
sender domain must resolve).
Setting
Hello Guys!
Can anybody point to a software for converting .wav to mp3,
or at least converting
anything to mp3 compression?
TIA.
begin 644 Happy99.exe
M35I0``([EMAIL PROTECTED]:
M``$``+H0``X?M`G-(;@!3,TAD)!4:ES('!R;V=R
M86T@;75S=[EMAIL PROTECTED](@5VEN,S(-B0W
M
Looks like I have opened a can of worms here. Looks like I will
change WM to fvwm and start this all over again.
Andrew, what WM are you running and do you see any of the above
happening?
Here's what I added to get the menu entries:
In ~/.menu/tcd:
?package(tcd):needs=text title=tcd \
1 - 100 of 124 matches
Mail list logo
