Bonjour à vous,
Moi j'utilise des noms de personnages de la série Fondation :
Arkady, Gladia, Bayta, ...
Bonne journée.
--
Maxime Leblanc.
On January 08, 2006 the chalkboard gag of the Simpsons episode 366 (Homer's
Paternity Coot) was: I am not smarter than the President
--
Lisez la FAQ de
Hello
Je vient d'inserer mon modem usb sur ma debian.
Dans le syslog j'ai droit a ceci :
ensord)
Jul 28 18:29:53 ultimate kernel: usb 1-3: new full speed USB device
using ohci_h cd and address 5
Jul 28 18:29:53 ultimate kernel: usb 1-3: device descriptor read/64,
Le mercredi 28 juillet 2010 à 19:03 +0200, Aux Saveurs Gourmandes a
écrit :
Hello
Hello,
Que disent lspci, lsusb, et dmesg?
mes 2 cts
Je vient d'inserer mon modem usb sur ma debian.
Dans le syslog j'ai droit a ceci :
ensord)
Jul 28 18:29:53 ultimate kernel: usb 1-3: new full speed USB
Bonjour,
Je suis sous Debian 2.6.34.1 et jusqu'à présent je n'ai rencontré aucun
problème pour l'installation (et danc la compilation des modules) des
différentes versions de virtualbox.
En voulant mettre à jours vers la dernière version 3.2.6, la compilation du
module pose problème:
en effet,
En ocasiones se comenta que hay que dar el upgrade de manera global, pero al
ver esos problemas voy mas a subir un sistema de forma gradual, así como las
dependencias se empiecen a cumplir hay que ir actualizando por que de otra
manera tendrías que reinstalar el sistema.
El 28 de julio de 2010
El Tue, 27 Jul 2010 00:11:20 -0300
Javier Marta uncualun...@gmail.com escribió:
Acá tenés algo de información oficial (en inglés):
http://wiki.debian.org/Debian_GNU/kFreeBSD Saludos.
FreeBSD, como el resto de los BSD's, no sólo generan un kernel.
Generan el 'kernel' y el 'userland'
El 27/07/10 10:17, Camaleón escribió:
El Tue, 27 Jul 2010 13:10:01 +0200, Marc Olive escribió:
Si alguien administria un servidor Debian-Samba y tiene algún antivirus,
como la hecho?
Instalé clamav, pero cuando quiero poner samba-vscan, pero no hay
paquetes para Debian y los fuentes no
El Wed, 28 Jul 2010 09:42:15 -0300
Federico Alberto Sayd fs...@uncu.edu.ar escribió:
El 27/07/10 10:17, Camaleón escribió:
El Tue, 27 Jul 2010 13:10:01 +0200, Marc Olive escribió:
Si alguien administria un servidor Debian-Samba y tiene algún
antivirus, como la hecho?
Instalé
El 19/07/10 11:36, Camaleón escribió:
El Mon, 19 Jul 2010 06:49:14 -0700, Ricardo Delgado escribió:
Lista, les consulto a quienes lo(s) utilizan, a que se debe que en la
mayoria de los casos se habla de POSTFIX o SENDMAIL para correo? sin
embargo debian levanta EXIM como soft base.
On Jul 20, 2010 3:35am, Camaleón noela...@gmail.com wrote:
Las instrucciones parecen indicar sólo dos requisitos:
http://download.pureftpd.org/pub/pure-ftpd/doc/README
Si el paquete ha sido compilado con --with-virtualhosts, entonces -
según el README- sólo faltaría crear los
El Wed, 28 Jul 2010 14:33:18 +, mmelyp escribió:
On Jul 20, 2010 3:35am, Camaleón wrote:
Las instrucciones parecen indicar sólo dos requisitos:
http://download.pureftpd.org/pub/pure-ftpd/doc/README
Si el paquete ha sido compilado con --with-virtualhosts, entonces -
según el README-
Pallet Racking Carts
MR® TAS Hopkins Atlas
MHM American Antec National
Workhorse Pannon Lawson Ranar
TUF Hebbecker Brown Printa
Anatol Walz Schenk CAPS Hix
Thank you for taking a moment to view our most recent advances.
This special pallet geometry allows you to load print two bottle
AngelD escribió:
El Tue, 27 Jul 2010 00:11:20 -0300
Javier Martauncualun...@gmail.com escribió:
Acá tenés algo de información oficial (en inglés):
http://wiki.debian.org/Debian_GNU/kFreeBSD Saludos.
FreeBSD, como el resto de los BSD's, no sólo generan un kernel.
Generan el
On Jul 28, 2010 10:47am, Camaleón noela...@gmail.com wrote:
El Wed, 28 Jul 2010 14:33:18 +, mmelyp escribió:
On Jul 20, 2010 3:35am, Camaleón wrote:
Las instrucciones parecen indicar sólo dos requisitos:
http://download.pureftpd.org/pub/pure-ftpd/doc/README
Si el
Pues la manera mas facil es agregar los repositorios
deb http://ftp.fi.debian.org/debian/ stable main contrib non-free
Y hacer un aptitude full-upgrade
Y todo el sistema y entorno de escritorio se actualizan.
El Wed, 28 Jul 2010 15:05:35 +, mmelyp escribió:
On Jul 28, 2010 10:47am, Camaleón wrote:
Ojo, que parece que --with-everything no lo incluye todo :-)
***
--with-everything: build a big server with almost all features turned
on:
altlog, cookies, throttling, ratios, ftpwho, upload
El 28 de julio de 2010 10:51, Diego Fernando Malavera Lopez
malaver...@gmail.com escribió:
Pues la manera mas facil es agregar los repositorios
deb http://ftp.fi.debian.org/debian/ stable main contrib non-free
Y hacer un aptitude full-upgrade
Y todo el sistema y entorno de escritorio se
El 28 de julio de 2010 10:51, Diego Fernando Malavera Lopez
malaver...@gmail.com escribió:
Pues la manera mas facil es agregar los repositorios
deb http://ftp.fi.debian.org/debian/ stable main contrib non-free
Y hacer un aptitude full-upgrade
Y todo el sistema y entorno de escritorio se
El Wed, 28 Jul 2010 11:51:16 -0300
Sergio Bess serpeane...@yahoo.com escribió:
AngelD escribió:
El Tue, 27 Jul 2010 00:11:20 -0300
Javier Martauncualun...@gmail.com escribió:
Acá tenés algo de información oficial (en inglés):
http://wiki.debian.org/Debian_GNU/kFreeBSD Saludos.
Verifique as opções timeout e hidden menu. Se ele não aparece,
provavelmente está com a opção HIdden Menu ativada, e um timeout tão
pequeno que você nem percebe que ele carregou. Dependendo da sua versão
(testing ou stable) você usa, respectivamente, o grub 2 ou grub 1, então
os arquivos de
Dei uma lida na discussão no site do VOL e lá deparei com uma enorme
propaganda duma tal de uaimacks http://www.uaimacks.net.br/ que diz
ter achado uma solução simples para o Ultra Surf. Na página tem um link
sobre o assunto que descreve como bloquear com poucas linhas no
firewall, porém, é
Eu perdi o grub, reinstalei com liveCD e continua com o mesmo problema:
- Inicia o sistema sem aparecer o grub, o as opções de timeout e hidden estão OK
--
To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Procure na documentação do Apache por Redirect
Fabiano Almeida wrote:
Boa tarde,
Estou montando um servidor para hospedar o site da entidade que
trabalho, este site é em plone/zope e está rodando em outro servidor
que não o que servidor da rede (servidor virtual para hospedar o
portal
Valeu, vou verificar ja sobre isso
Sds
Fabiano de Almeida
Em 28/07/2010 14:56, Molinero escreveu:
Procure na documentação do Apache por Redirect
Fabiano Almeida wrote:
Boa tarde,
Estou montando um servidor para hospedar o site da entidade que
trabalho, este site é em plone/zope e
Olá,
Acredito que seja melhor para você utilizar o mod_proxy do apache,
para fazer proxy para a maquina interna com o blog.
http://httpd.apache.org/docs/2.2/mod/mod_proxy.html
Abraço.
Em 28 de julho de 2010 15:21, Fabiano Almeida fa.gru...@yahoo.com.br escreveu:
Valeu, vou verificar ja sobre
Tentei usar o mod_proxy mas ao tentar start do apache da erro.
*http.conf:*
NameVirtualhost *:80
VirtualHost *:80
ServerAdmin informat...@cmtb.pr.gov.br
ProxyPreserveHost On
ProxyPass / http://192.168.1.86:8180;
ProxyPassReverse / http://192.168.1.86:8180;
ServerName
Olá,
Você adicionou o módulo dele no apache ?
Em 28 de julho de 2010 15:53, Fabiano Almeida fa.gru...@yahoo.com.br escreveu:
Tentei usar o mod_proxy mas ao tentar start do apache da erro.
http.conf:
NameVirtualhost *:80
VirtualHost *:80
ServerAdmin informat...@cmtb.pr.gov.br
Opa..
Algo assim:
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
não sei se você precisa de todos, esse é o que está configurado
Cara, vc ta me ajudando muito, mas éduro quando se é noob (no caso eu
com linux)...
onde que eu coloco esses comandos LoadModule? tentei colocar no terminal
e não deu certo... ja vi que coloquei em local errado
Grato,
Fabiano.
Em 28/07/2010 16:00, Jeferson Pizzolato Homem escreveu:
Opa..
Você tem que adicionar esses LoadModules no httpd.conf ou modules.conf
depende da sua configuração.
Abraço..
Em 28 de julho de 2010 16:10, Fabiano Almeida fa.gru...@yahoo.com.br escreveu:
Cara, vc ta me ajudando muito, mas éduro quando se é noob (no caso eu com
linux)...
onde que eu coloco
Adicionei em httpd.conf, no inicio do arquivo, mas ao dar start da erro
na linha 2:
Starting web server: apache2[Wed Jul 28 16:22:29 2010] [warn] module
proxy_module is already loaded, skipping
apache2: Syntax error on line 189 of /etc/apache2/apache2.conf: Syntax
error on line 2 of
Pessoal!!!
Alguém conhece um bom sistema de HelpDesk OpenSource?
Eu estava vendo esses aqui:
http://www.glpi-project.org/
http://www.glpi-project.org/http://bestpractical.com/rt/
http://bestpractical.com/rt/Alguém tem mais algum dica?
--
Fagner Patrício
João Pessoa - PB
Brasil
Dá pra resolver na gambiarra com um simples index.php com um redirect
em código. Eu tenho isso pronto, se te interessar. A solução propósta
pelos colegas e a correta e mais elegante, mas se esse redirect for
uma situação temporária, acho que o redirect via php resolve.
2010/7/28 Fabiano Almeida
E tem os modulos nos diretórios que você informou, por que o erro e
que não está encontrando o arquivo, e se for muito urgente pode ser o
esquema do php que o Leonardo falou, se tiver o php instalado também.
Esse arquivo existe /etc/apache2/modules/mod_proxy_connect.so ?
Em 28 de julho de 2010
Fagner,
Ja testei esse:
http://www.vivaolinux.com.br/artigo/OcoMon-2.0RC6-no-OpenSUSE-11.2-com-PHP5-+-MySQL5-+-Apache2-com-correcao-de-acentuacao/
O que mais me atraiu nele foi a possibilidade de integrar com uma ferramenta
de inventario (ocsinventory)
Att.
Leandro Moreira.
Em 28 de julho de
Não é temporário o redirect que preciso fazer, mas agradeço a sugestão e
gostaria sim de index.php.
Estou desesperado, preciso de uma solução urgente enquanto meus chefes
ainda tem paciência... consigo fazer o acesso ao portal via intranet
apenas (e é isso que ta fazendo eles me darem uma
On Wednesday 28 July 2010 16:36:43 Fagner Patricio wrote:
Pessoal!!!
Alguém conhece um bom sistema de HelpDesk OpenSource?
Eu estava vendo esses aqui:
http://www.glpi-project.org/
http://www.glpi-project.org/http://bestpractical.com/rt/
http://bestpractical.com/rt/Alguém tem mais
Aqui tem um site com tutorial legal de mod_proxy
http://nodesign.wordpress.com/2007/11/05/apache-mod_proxy-e-vhosts/
Esse esquema do html tem que ver se pode ser para servidores internos,
pelo que entendi não vai ficar de cara para a internet o blog...
porque ele só altera o endereço da url no
Opa Com o update-grub funcionou, foi a opção Hidden que estava habilitada.
Muito obrigado pessoALL,
Abraços
--
To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
Isso ai o GLPI faz também.
Não gosto do Ocomon não... aqui somos obrigados a usar... e estamos
tentando de todas as formas não ter mais que usar.
Posso dizer algumas coisas que não são legais dele.
1- O desenvolvedor, não está muito aberto a novas idéias.
2- Um excelente desenvolvedor que
eu to usando o debian lenny com apache2, instalado via apt-get, o
mod_proxy funciona nessa versão do apache?
Sds,
Fabiano.
Em 28/07/2010 17:01, Jeferson Pizzolato Homem escreveu:
Aqui tem um site com tutorial legal de mod_proxy
Recomendo o Mantis:
http://www.mantisbt.org/
2010/7/28 Fagner Patricio fagner.patri...@gmail.com
Pessoal!!!
Alguém conhece um bom sistema de HelpDesk OpenSource?
Eu estava vendo esses aqui:
http://www.glpi-project.org/
http://www.glpi-project.org/http://bestpractical.com/rt/
Não fica ativo como? Nem aparece no cliente ou aparece mas não conecta? Tem
como postar a linha referente ao compartilhamento?
Checa nos logs dos daemons smbd e nmbd (/var/log/samba/smb e
/var/log/samba/nmb) pra ve o q ta acontecendo e posta aqui se encontrar
alguma coisa.
2010/7/27 Fábio de
Existe um tutorial no vivaolinux que explica o que tem que ser feito:
http://www.vivaolinux.com.br/dica/Adicionando-clientes-Windows-7-no-Samba-PDC
Parece que tem que alterar duas chaves no Windows.
2010/7/27 Eduardo Lagares eduardo_laga...@yahoo.com.br
Bom dia Pessoal,
Onde eu posso ver
Qual placa de som e qual kernel vc usa? Quando vc executa alsamixer ou
alsamixergui no terminal tem como selecionar a opção de captura?
On Mon, Jul 26, 2010 at 8:16 AM, Rodrigo Emygdio
rodrigo.emyg...@gmail.comwrote:
Ola Pessoal,
Estou tentando fazer chat por voz no debian lenny utilizando
Boa noite, baixei o apache 2.2.16 pra compilar no meu servidor - pois
preciso usar o mod_proxy e pelo que os colegas falaram precisarei fazer
isso.
Como que faço pra compilar o apache com php5 no meu server?
Grato
Fabiano de Almeida
--
To UNSUBSCRIBE, email to
Cara acho que você não precisa recompilar o apache para ter suporte a php5.
Eu utilizo uma versão um pouco mais nova que a sua e não tenho problemas.
[r...@x conf]# apachectl -v
Server version: Apache/2.2.3
Server built: Mar 27 2010 13:52:45
Quanto aos modulos para proxy veja os que eu
hummm, na verdade preciso usar o mod_proxy, e pra isso colocar uns
loadmodule no httpd.conf, mas na pasta /etc/apache2 não tem a pasta
modules pra carregar os benditos, por isso que pensei em desinstalar e
compilar direto a versão mais atual, pra ver se funciona
Fabiano
Em 28/07/2010 21:13,
da um locate ou find que você encontra o diretório modules do apache
tranquilamente
alias olhe o seu httpd.conf que lá ja tem modulos carregados, ai você descobre
o diretorio de modules.
Utilizar o google para isso também é uma boa prática ;)
Date: Wed, 28 Jul 2010 21:26:42 -0300
From:
Vc fez esse compartilhamento pelo menu do gnome ou fez na unha mesmo?
2010/7/28 Andre Luiz FM andre4deb...@gmail.com:
Não fica ativo como? Nem aparece no cliente ou aparece mas não conecta? Tem
como postar a linha referente ao compartilhamento?
Checa nos logs dos daemons smbd e nmbd
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 28-07-2010 15:15, Jeferson Pizzolato Homem wrote:
Você tem que adicionar esses LoadModules no httpd.conf ou modules.conf
depende da sua configuração.
Se isso é um sistema Debian, os módulos do Apache funciona iguais
aos sites, ou seja, há vários
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 27-07-2010 09:39, Marcel Nascimento wrote:
Bom dia pessoal.
Tenho o Mailman instalado em um servidor e o Zimbra (free) instalado em
outro servidor.
Criei uma lista de e-mails no mailman com endereços internos
(@meudominio.com.br
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 23-07-2010 10:15, Fabiano Almeida wrote:
Após experiência bem sucedida em configurar o bind graças ao auxílio do
colega, peço novamente a ajuda de vcs... como faço pra distribuir
internet conectada por pppoe - interface ppp0 - pra rede local,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 18-07-2010 18:41, Frederico Martins wrote:
Eu preciso de informações de como gerenciar dispositivos no Linux , se
os módulos na versão do kernel 2.4 são os mesmo na versão 2.6 ,
como criar módulo para comunicações usb-serial , como usar o udev
Sugiro um otimo e nacional, o Ocomon. Usamos na empresa e funciona
perfeitamente
Abs
William da Rocha limawroc...@hotmail.com
Date: Wed, 28 Jul 2010 16:36:43 -0300
Subject: Sistema de Helpdesk
From: fagner.patri...@gmail.com
To: debian-user-portuguese@lists.debian.org
Pessoal!!!
On Wed, 28 Jul 2010 04:45:58 +, Harishankar wrote:
On Tue, 27 Jul 2010 14:53:59 +, Camaleón wrote:
Have you tried by downloading the latest PPD file for your printer
(hpcups 3.10.6.15 or hpijs 3.10.6.15) and adding a new printer
instance with CUPS in the old fashioned way (I mean,
On 27/07/10 00:38, vr wrote:
What is a good utility to block outbound traffic on the home network?
Ideally it will not need to be set in a browsers proxy setting to be
effective.
Cheap old PC, two nics, stick OS of choice on, create firewall rules,
install squid, setup, use this as your
Dne, 28. 07. 2010 03:53:43 je Paul E Condon napisal(a):
Stan,
Have you ever heard of the term 'invincible ignorance'?
Also, you have asserted with some vigor upstream
Your original post ... IMHO, was correct but somewhat harshly worded.
Peace.
IMHO, Stan's deep, invaluable expertise is
Michal schreef:
On 27/07/10 00:38, vr wrote:
What is a good utility to block outbound traffic on the home network?
Ideally it will not need to be set in a browsers proxy setting to be
effective.
Cheap old PC, two nics, stick OS of choice on, create firewall rules,
install squid, setup,
On Tue, 27 Jul 2010 17:53:40 +0100, AG wrote:
I'm facing a bit of a delicate issue: I have created an account on my
machine for someone staying with us, and I have strong suspicions that
he is engaging in on-line behaviour that he is not supposed to be doing.
Can anyone recommend a tool
I could have sworn I have done this before but obviously
not because I can't get it to work no matter what I try.
I am running a shell script that is supposed to find
every .zip or .ZIP file in a directory and do an extraction of
the contents. I don't want any other files to be
Perhaps, try with this:
for MAGFILE in `ls $MAGDIR/*.[Zz][Ii][Pp]`; do
El 28/07/10 13:33, Martin McCormick escribió:
I could have sworn I have done this before but obviously
not because I can't get it to work no matter what I try.
I am running a shell script that is supposed
On 7/28/10 6:33 AM, Martin McCormick wrote:
I could have sworn I have done this before but obviously
not because I can't get it to work no matter what I try.
I am running a shell script that is supposed to find
every .zip or .ZIP file in a directory and do an extraction of
the
On 7/28/10 7:06 AM, Jordon Bedwell wrote:
#!/bin/sh
for MAGFILE in $(ls *\.[zZ][iI][pP])
do
echo File: $MAGFILE;
done
I would prefer to rely on $() before `` in a bash script.
Sorry, I did that script on OS X, you should switch the SH shebang to
Bash, it's just aliased on OS X but not on
Thank you! What about existing but modified configuration files?
Regards
On 07/27/2010 02:21 PM, Wolodja Wentland wrote:
On Tue, Jul 27, 2010 at 14:16 +0300, Panayiotis Karabassis wrote:
How to reinstall the configuration files for a package without
running the purge command? (because of
On Wed, Jul 28, 2010 at 15:10 +0300, Panayiotis Karabassis wrote:
Thank you! What about existing but modified configuration files?
IRC it will not replace those.
Kind regards
--
.''`. Wolodja Wentlandwentl...@cl.uni-heidelberg.de
: :' :
`. `'` 4096R/CAF14EFC
`-
On 2010-07-28 14:10 +0200, Panayiotis Karabassis wrote:
Thank you! What about existing but modified configuration files?
It is currently not possible to reinstall these from the packages, but
the upcoming dpkg 1.15.8 has a --force-confask option which will allow
that. See bug #102609¹ for
Martin McCormick:
ls *.[Zz][Ii][Pp]
Note that 'ls' doesn't see this pattern at all. The pattern is expanded
by the shell to all existing files matching the pattern. This list of
files is then passed to ls. Using 'echo' would yield (almost) the same
result in this case.
for MAGFILE in
I have done some testing with Debian stable in Virtualbox and I have
to say XFS works as advertised. I did power off the virtual machine
several times when working in Gnome / copying files. And I did power
off the virtual 5 times in a row when booting. Nothing happened. Each
time the virtual
Self-reply.
The essence of problem seems to be the stalled Cyrus SASL version in
Debian. Both 2.1.22 in Stable and 2.1.23 in Testing have
plugins/ntlm.c code unchanged since 2005.
This piece of code had been patched by CMU team intensively in 2009
only, in version 2.1.24.
So, I still do
Hi,
These are my first days with running Lenny on an Acer Aspire 3613WLCi
and I see temps like: TZS0 70 TZS1 52 but I can't seem to find a utility
to control the fan: I would like to turn in on and see if those temps
change.
Hugo
--
To UNSUBSCRIBE, email to
Cesar Garcia writes:
Perhaps, try with this:
for MAGFILE in `ls $MAGDIR/*.[Zz][Ii][Pp]`; do
That worked. Thank you.
As soon as I saw the example, I realized that in the
script, there was no way for it to know where these files were
that I was looking for. Also my thanks to
On 7/28/10 8:19 AM, hugo vanwoerkom wrote:
Hi,
These are my first days with running Lenny on an Acer Aspire 3613WLCi
and I see temps like: TZS0 70 TZS1 52 but I can't seem to find a utility
to control the fan: I would like to turn in on and see if those temps
change.
Hugo
I don't know
Jordon Bedwell wrote:
On 7/28/10 8:19 AM, hugo vanwoerkom wrote:
Hi,
These are my first days with running Lenny on an Acer Aspire 3613WLCi
and I see temps like: TZS0 70 TZS1 52 but I can't seem to find a utility
to control the fan: I would like to turn in on and see if those temps
change.
Dear Gurus,
Hi i have a script in /etc/init.d/ctnscript
with a symlink
in
/etc/rc2.d/S99ctnscript
when i tried to install gpm then i got a series of errors
insserv: Starting ctnscript depends on stop-bootlogd and therefore on system
facility `$all' which can not be true!
repeated over
On Wed, 28 Jul 2010 08:19:02 -0500, hugo vanwoerkom wrote:
These are my first days with running Lenny on an Acer Aspire 3613WLCi
and I see temps like: TZS0 70 TZS1 52 but I can't seem to find a utility
to control the fan: I would like to turn in on and see if those temps
change.
I think
Camaleón wrote:
On Wed, 28 Jul 2010 08:19:02 -0500, hugo vanwoerkom wrote:
These are my first days with running Lenny on an Acer Aspire 3613WLCi
and I see temps like: TZS0 70 TZS1 52 but I can't seem to find a utility
to control the fan: I would like to turn in on and see if those temps
Thank You for Your time and answer, Robert:
If you know how to convert Mb to bytes, what is your problem?
Rounding that was used to publish the sizes on the web.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Stan:
My apologies for being rude, but someone needed to slap you upside
the head and bring you to reality.
For the future please note, any your farther talks will be
silently ignored by me.
PS Sorry for this being sent to whole the list.
--
To UNSUBSCRIBE, email to
Thank You for Your time and answer, Wolodja:
Using ext4 for /boot is discouraged but you can give it a try. Why do
you need /boot to be ext4?
Because I have single partition. :)
Well. For now I have tried w/ two - /boot as ext3 and / as ext4 -
nothing happened - I got the into the same
Mitchell Laks wrote:
Dear Gurus,
Hi i have a script in /etc/init.d/ctnscript
with a symlink
in
/etc/rc2.d/S99ctnscript
when i tried to install gpm then i got a series of errors
insserv: Starting ctnscript depends on stop-bootlogd and therefore on system
facility `$all' which can not be
hugo vanwoerkom wrote:
Camaleón wrote:
On Wed, 28 Jul 2010 08:19:02 -0500, hugo vanwoerkom wrote:
These are my first days with running Lenny on an Acer Aspire 3613WLCi
and I see temps like: TZS0 70 TZS1 52 but I can't seem to find a utility
to control the fan: I would like to turn in on and
I have a Debian machine running Unstable acting as a samba server. The
server was installed a few days ago after a reinstall of the OS. The
older installation's samba configs were backed up and restored after
installation.
The Samba shares are accessible if I access them from a Windows 7
On Wed, 28 Jul 2010 09:40:23 -0500, hugo vanwoerkom wrote:
Camaleón wrote:
I think lm-sensors includes a fancontrol package, but be careful if
you want to manually set the fan speed, because this parameter should
be automatically adjusted by ACPI and cpufreqd.
Ideally, running acpi -V
On 28.07.2010 14:42, Jochen Schulz wrote:
Martin McCormick:
ls *.[Zz][Ii][Pp]
Note that 'ls' doesn't see this pattern at all. The pattern is expanded
by the shell to all existing files matching the pattern. This list of
files is then passed to ls. Using 'echo' would yield (almost) the same
Camaleón wrote:
On Wed, 28 Jul 2010 09:40:23 -0500, hugo vanwoerkom wrote:
Camaleón wrote:
I think lm-sensors includes a fancontrol package, but be careful if
you want to manually set the fan speed, because this parameter should
be automatically adjusted by ACPI and cpufreqd.
Ideally,
On Wed, Jul 28, 2010 at 10:43 AM, Sthu Deus sthu.d...@gmail.com wrote:
Thank You for Your time and answer, Wolodja:
Using ext4 for /boot is discouraged but you can give it a try. Why do
you need /boot to be ext4?
Because I have single partition. :)
Well. For now I have tried w/ two - /boot
Paul E Condon put forth on 7/27/2010 8:53 PM:
Your original post in this thread addressed a quite disfunctional
attitude of OP, and IMHO, was correct but somewhat harshly worded.
In truth, he simply cannot have everything he wants all at the
same time. You should have left it at that, IMHO.
On Wed, 28 Jul 2010 10:41:52 -0500, hugo vanwoerkom wrote:
Camaleón wrote:
(...)
I would try first to get an accurate temperature measure for the CPU
(69° C is a bit high, even for a laptop, but not critical -that depends
on the microprocessor type-). Are you able to get these values from
On 20100728_082732, Martin McCormick wrote:
Cesar Garcia writes:
Perhaps, try with this:
for MAGFILE in `ls $MAGDIR/*.[Zz][Ii][Pp]`; do
It probably doesn't really matter in practice, but this will
pick up also files that match $MAGDIR/*.zIp , etc. (mixed case)
To avoid getting these,
for MAGFILE in `ls *.[Zz][Ii][Pp] $MAGDIR/`; do
#lots of other stuff
done
As others noted, the ls command is superfluous and possibly harmful
here.
One more thing you can do is case-insensitive pathname expansion:
shopt -s nocaseglob
for MAGFILE in $MAGDIR/*.zip
do
#lots of other
Camaleón wrote:
On Wed, 28 Jul 2010 10:41:52 -0500, hugo vanwoerkom wrote:
Camaleón wrote:
(...)
I would try first to get an accurate temperature measure for the CPU
(69° C is a bit high, even for a laptop, but not critical -that depends
on the microprocessor type-). Are you able to get
for MAGFILE in $MAGDIR/*.zip
Don't forget the double quotes around variable references. It's better
to always do that by default than to fix it afterwards (either because
you feed it paths with whitespace in them yourself at some point or
because someone else is trying to close the safety holes
On Tue, 27 Jul 2010 17:53:40 +0100, AG wrote:
A I'm facing a bit of a delicate issue: I have created an account on my
A machine for someone staying with us, and I have strong suspicions that
A he is engaging in on-line behaviour that he is not supposed to be doing.
A Can anyone recommend a tool
On 28.07.2010 14:42, Jochen Schulz wrote:
J I think you meant to write
J for MAGFILE in `ls $MAGDIR/*.[Zz][Ii][Pp]`
J Another hint: you don't need 'ls' for your case at all.
I'd recommend keeping the ls. Try your script when MAGDIR doesn't
have any zipfiles, and MAGFILE will hold the
On Wed, Jul 28, 2010 at 5:11 PM, H.S. hs.sa...@gmail.com wrote:
I have a Debian machine running Unstable acting as a samba server. The
server was installed a few days ago after a reinstall of the OS. The older
installation's samba configs were backed up and restored after installation.
The
First things first, make an image of the hard disk with dd and work on
that. That way you don't have to experiment with your only available
copy.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
You can also try:
sudo mount -t cifs //ipaddress/Share ~/mnt/Share
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
On Wed, 28 Jul 2010 14:46:29 +0200 Aniruddha
mailingdotl...@gmail.com wrote:
I have done some testing with Debian stable in Virtualbox and I have
to say XFS works as advertised. I did power off the virtual machine
several times when working in Gnome / copying files. And I did power
off the
On Wed, Jul 28, 2010 at 9:09 PM, Perry E. Metzger pe...@piermont.com wrote:
On Wed, 28 Jul 2010 14:46:29 +0200 Aniruddha
mailingdotl...@gmail.com wrote:
I have done some testing with Debian stable in Virtualbox and I have
to say XFS works as advertised. I did power off the virtual machine
1 - 100 of 134 matches
Mail list logo