Re: make menuconfig error

--- Dale Morris [EMAIL PROTECTED] wrote: I'm trying to compile my new 2.2.16 kernel and when I run make menuconfig, I get the following error: make[1]: Entering directory `/usr/src/linux/scripts/lxdialog' gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -DLOCALE

Re: make menuconfig error

I think the curses.h is missing. Try installing the library ncurses. Be sure to give a make mrproper before givin make menuconfig. --- Dale Morris [EMAIL PROTECTED] wrote: I'm trying to compile my new 2.2.16 kernel and when I run make menuconfig, I get the following error: make[1]: Entering

Creative Live Value !!

Hi All, I am using Creative Live Value !! card and Debian Potato. Earlier I was using RH 6.1, on which, it was giving excellent performance, with drivers downloaded from developer.soundblaster.com, even better performace than in Windows 98. I installed the same drivers in Deb, but unfortunately,

Re: Creative Live Value !!

Hi All I am also using Live value !!(emu10k1). I have been using it with excellent quality in RH 6.1. When I changed to Debian, it gives very poor quality of sound with distortion etc. I tried both alsa and the driver from Creative site. Can you give some more details regarding the applications

Filemap limit and Squid

Hello List, I am using Debian Potato/Kernel 2.2.17. I have configured my linux box as a dialup gateway to internet. I am using Squid as a transparent proxy with ipchains. At times, Squid hesitates to start on boot up. On forcefully reloding squid with /etc/init.d/squid start I am getting the

Filemap limit and Squid

Hello List, I am using Debian Potato/Kernel 2.2.17. I have configured my linux box as a dialup gateway to internet. I am using Squid as a transparent proxy with ipchains. At times, Squid hesitates to start on boot up. On forcefully reloding squid with /etc/init.d/squid start I am getting the

DNS Mail

Hi List, I have configured a DNS server using bind in Debian potato, Kernel 2.2.17. I have defined the hosts www.xxx.yyy.com, ftp.xxx.yyy.com, mail.xxx.yyy.com etc. I can get the web page hosted at www.xxx.yyy.com by typing the URL in browser window. How can I get the same by typing just

Routing

Hi all, I have a network with the following configuration. - 192.168.1.0/24 | | 192.168.1.1192.168.1.2 Linux Gateway Router / |

Kernel - Ethernet module

Hello all, I wish to compile Compex RL100a module into the kernel, which is not included in the kernel sources (Not as a loadble module). I have the source file and I modified the drivers/net/Config.in and drivers/net/Makefile to make the changes and the module is getting compiled during kernel

Re: xdm login problems

Hi I also got the same error when I uninstalled xdm, and re-installed it later. I couldn't find any solution till now and I am also interested in a solution. I installed gdm as a substitute for temporary operation. Rds, Deb --- Pedro Quaresma de Almeida [EMAIL PROTECTED] wrote: Andy Saxena

Re: Kernel - Ethernet module

Hi Eduard, This also I had tried, but still !! (: Anything else ? Deb --- Eduard Bloch [EMAIL PROTECTED] wrote: #include hallo.h Debian GNU wrote on Wed Aug 01, 2001 um 12:42:29AM: I wish to compile Compex RL100a module into the kernel, which is not included in the kernel sources Hm

Domain Controller

Hello all, I have a network running M$ Win NT as domain controller and clients running M$ Win NT workstations. I plan to switch over to a full Debian system in a phased manner. Now I plan to change the server to Potato. Is it possible to setup the potato as a domain controller as NT so that I can

Xfree86-3.3.6 + i810

Hello All, I have installed Potato on my machine i810. It has Xfree86-3.3.6 and Kernel 2.2.19pre17. I have compiled in the kernel module agpgart.o. But I am not able to configure Xserver on this. could somebody help me out or is there any howtos to do the installation. I specifically require to

Unidentified subject!

Tnx for the response. I have visited intel's page, where I can find only RPMS. No debs or sources are available there. In fact I was using RH on this machine and X was working fine. When I changed to Debian, I am facing some startup problems. How can I make use of the RPMS in intel's site ? Can

Re:Re: Xfree86-3.3.6 + i810

Tnx for the response. I have visited intel's page, where I can find only RPMS. No debs or sources are available there. In fact I was using RH on this machine and X was working fine. When I changed to Debian, I am facing some startup problems. How can I make use of the RPMS in intel's site ? Can I

Routing Problem

Hi all, My machine running potato has rtl8139 network card. I have configured it as eth0 and eth0:0 with two ip addresses. I am able to ping to machines in two ip ranges and working fine. Now I have added one more alias as eth0:0 with ip address 192.168.1.10 in /etc/network/interfaces. When I am

Re: Routing Problem

If it would have been a permission probelem, I would not have been able to access the other networks. I did as both root and ordinary user. But both gave the same results. Deb --- Miguel Griffa [EMAIL PROTECTED] wrote: At 12:49 a.m. 28/06/01 -0700, Debian GNU wrote: Hi all, My machine

Re: Routing Problem

Dear Christoph, Tnx friend. That was the problem. I was extensively using ipchians to make this box a gateway with firewalling. I slipped this. Thanks again. Regards, Deb --- Christoph Simon [EMAIL PROTECTED] wrote: On Thu, 28 Jun 2001 19:04:41 -0700 (PDT) Debian GNU [EMAIL PROTECTED] wrote

Xfree86 3.3.6 on i810 : Getting error

Hello all, In my potato with xfree86-3.3.6, running inteln810e, I tried to install xserver using the rpms downloaded from intel's site, converted to debin using alien. I got the instructions from our list members. After installation, when i try to start X I am getting error as shown below and it

Re: Xfree86 3.3.6 on i810 : Getting error

I have run xf86config and did the modifications as directed in intel's site documentation. Deb --- Jonathan Daugherty [EMAIL PROTECTED] wrote: Have you run XF86Setup? -- Jonathan Daugherty Dept. of Computer Science / UCNS Workstation Support Group The University of Georgia

Re: Portmapper Problem

Edit /etc/resolv.conf and add entry 127.0.0.1 localhost localhost.localdomain This will solve your problem. Rds, Deb --- Guenter Millahn [EMAIL PROTECTED] wrote: G'day On my sid/i386 box I have a problem with the portmap daemon since the critical bug regarding the PAM modules. The

Re: Portmapper Problem

--- Anthony J. Breeds-Taurima [EMAIL PROTECTED] wrote: On Wed, 4 Jul 2001, Debian GNU wrote: Edit /etc/resolv.conf and add entry 127.0.0.1 localhost localhost.localdomain I think you mean /etc/hosts Exactly. Sorry for the slip. Deb Yours Tony. /* * The significant problems we

D

__ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/

D

__ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/

DMA Problem

Hi all, In my Potato/2.2.19pre17 I am getting the following message in the console occationally. hda: status timeout: status=0xd0 {Busy} hda: no DRQ after issuing WRITE ide0: unexpected interrupt, status 0x80, count=4 ide0: reset success How can I fix it ? Tnx in advance Deb

Re: IMP webmail

Hi, You can install Exim/Sendmail as MTA. For Web interface, you can use mailreader, a nice program which can be downloaded from mailreader.com. You need apache to host the web interface. Good luck, Deb --- Giuliano Cardozo Medalha [EMAIL PROTECTED] wrote: Hi I am a Debai (2.2 rev 3) user

DMA Problem : Re-post

Hi all, In my Potato/2.2.19pre17 I am getting the following message in the console occationally. hda: status timeout: status=0xd0 {Busy} hda: no DRQ after issuing WRITE ide0: unexpected interrupt, status 0x80, count=4 ide0: reset success How can I fix it ? Tnx in advance Deb

Mail: Cannot create lock file

Hi all, In my new debian potato installation, I created a seperate partetion for mail and mounted it in /var/spool/mail. Mails are getting properly delivered. If I am using 'mail' command to read mails, I am getting the following error : mail: Cannot create lock file /var/spool/mail/.lock.

Re: Mail: Cannot create lock file - SOLVED

Hi all, I could solve the problem. The group for the mail directory was root, and I changed to to mail. It solved my problem. Sorry for the trouble Deb --- Debian GNU [EMAIL PROTECTED] wrote: Hi all, In my new debian potato installation, I created a seperate partetion for mail and mounted

Mutiple mail servers

Hi all, I am using sendmail for mail distribution. I am planning to add one more mail server so that some users are in the first mail server and the rest in the new one (For the same domain). Internet mails arrive directly on the first mail server. Can I configure sendmail so that if a user is

Mutiple mail servers : REPOST

Hi all, I am using sendmail for mail distribution. I am planning to add one more mail server so that some users are in the first mail server and the rest in the new one (For the same domain). Internet mails arrive directly on the first mail server. Can I configure sendmail so that if a user is

Re: Mutiple mail servers : REPOST

one mail server with all accounts on that one mail server? Mike Quoting Debian GNU [EMAIL PROTECTED]: Hi all, I am using sendmail for mail distribution. I am planning to add one more mail server so that some users are in the first mail server and the rest in the new one

Re: Mutiple mail servers : REPOST

for multiple domains with multiple accounts are so easy even for newbie like me. Cheers ;-) On Tue, Oct 16, 2001 at 07:06:55PM -0700, Debian GNU wrote: I am using sendmail for mail distribution. I am planning to add one more mail server so that some users are in the first mail server

Knoppix-Piggy and Debian installer

Last fresh installation (about the 4th) I made of Woody was in some old pentium 2 - 350 mhz, with not much to show. To get things right from the beginning I used this time a trick: First I had run piggy (the installer from Progeny) and then knoppix. I copied the settings for X and the modules