Thanks for your comments I also use apt* commands, when necessary, but
the point is that people don't seem to read thoroughly the threads they are
answering to: I don't mind using wicd, I even tried it. But it also uses
/etc/network/interfaces, and my questioning is about initramfs, ifaces
Le vendredi 20 mai 2016 16:09:25, vous avez écrit :
> Hi, I thought you might only be subscribed to the French list
> and not this one, so you might have missed this.
>
> Could we have a reference please for "said unstable by debian's package
> installer"? (I assume you're talking about the wicd
Thank you, I didn't know. In French (I was careful
here) languages' names and peoples' nationalities
don't take a capital letter. But towns' and countries'
names do of course.
Jacques
P.S.:I still don't see where was the joke in my post,
but never mind.
I had (and still partly have) the same questions. I know where to find the
answers, but didn't dare
to use them.
--First "nmcli -p connection show --active" will show all your connections. Or
me the access
point has name (not id) "Hotspot" (I don't know if the name depends on the
device and
May be a stupid question, as often: do you want a
plugin in iceweasel and firefox, like flash, or a stand-
alone video reader, like Totem or VLC?
Jacques
The whole sentence was: Mozilla
isn't free and Google Chrome is :-D! and was
of course ironic.
Jacques
I may be completely wrong: I had a canon printer once, and
canon had made a driver for Cups under MacOS but it doesn't
matter. After an OS upgrade, the driver didn't work anymore
and the driver used by Cups (gimp related if I remember well)
wasn't as good, by far. Canon said they didn't
Not using any MUA, just a browser (Opera, which is BTW in the official Debian
list:
https://wiki.debian.org/WebBrowsers, non-free but I don't know why as it is a
Mozilla
clone; Mozilla isn't free and Google Chrome is :-D), and I read the posts of
the list in
this browser (or in any other)
I used another post from the thread "Non-firefox browser" ,
which I quoted:
https://lists.debian.org/debian-user/2016/06/msg00437.html
so that nobody in this thread feels targeted ;-). Take a look at it.
Again, sorry for my *E*nglish.
Jacques
P.S.: In 2002
I read quite a lot of the answers to your post, and I still think there is a
problem, not
linked to the kernel's interface name name. I have a wifi interface named
*everywhere*
wlan0. It isn't found by network-pre.target, network-target or
networking-service, I
don't know which one. What I
Le jeudi 12 mai 2016, 14:18:57 debian-org a écrit :
> Bonjour,
>
> Je ne doute pas que le message initial, de même que les suivants, soient
> envoyés de bonne foi mais les réactions sur la liste me semblent tout à
> fait appropriées.
> Le premier message est alarmiste et ne donne pas la moindre
> Le 12 mai 2016 à 03:57, Patrick Bartek a écrit :
>
> Now that Google Chrome support has ceased for Wheezy (and others), and
> since I have no plans to upgrade the OS for another 2 years when it
> reaches LTS EOL, would Chromium make a decent alternative? Is it stable
>
Le samedi 14 mai 2016, 06:59:27 Richard Owlett a écrit :
> On 5/3/2016 8:37 AM, Lisi Reisz wrote:
> > On Tuesday 03 May 2016 11:11:45 Richard Owlett wrote:
> >> I hope the result will be a document aimed at the beginner but
> >> not the picture book style that seems prevalent at that level.
> >>
Le samedi 14 mai 2016, 08:28:42 Paolo Cavallini a écrit :
> Il 14/05/2016 00:28, Rodary Jacques ha scritto:
> > Try convert your docs in .doc (not readable in recent MsOffice), .docx
> > (not readable in old MsOffice :-) )or better in pdf, where the p stands
> > for portab
Le samedi 14 mai 2016, 06:47:11 Hans a écrit :
> Am Samstag, 14. Mai 2016, 05:27:06 schrieb Bhasker C V:
>
> Hi,
> try wicd (vicd-ncurses, wicd-gtk, wicd-cli). It may fit your needs. And you
> can have entries in /etc/network/interfaces, so you can be already
> connected without any
Le samedi 14 mai 2016, 06:47:11 Hans a écrit :
> Am Samstag, 14. Mai 2016, 05:27:06 schrieb Bhasker C V:
>
> Hi,
> try wicd (vicd-ncurses, wicd-gtk, wicd-cli). It may fit your needs. And you
> can have entries in /etc/network/interfaces, so you can be already
> connected without any
I have an Intel wifi card correctly configured for Jessie, thanks to
https://wiki.debian.org/fr/iwlwifi. I only need the Hotspot Access point,
but I can't start it at boot time, nor change its name and the WPA
password. I can only switch from "wifi active" state "to access point
active" after
I need a named.conf and zone-files for my LAN and I choosed a Chroot config. So
I created a user
"named" and put all the files in the jail /var/chroot/named with named:named
ownership. Named
does start with:
"named -u named -t /var/chroot/named -c /etc/named.conf"
To get the status I run:
Désolé mais personne n'a répondu à ma question : mon point
d'accès fonctionne correctement, mais :
-1- il n'est pas activé au démarrage.
-2- je ne peux pas modifier le mot de passe
En fait, je crois que je dois créer un service de systemd,
comme on pouvait le faire
Le vendredi 13 mai 2016, 11:15:16 Pierre Crescenzo a écrit :
> Bonjour,
>
> J'utilise Debian en stable+testing. Y a-t-il une solution pas trop tirée
> par les cheveux pour voir (et entendre) du Netflix (quand on est abonné
>
> :-)) sous Debian. J'ai essayé des solutions sous Chrome (chromium) ou
Le jeudi 12 mai 2016, 21:55:24 Liam O'Toole a écrit :
> On 2016-05-12, soko.tica wrote:
> > --001a1146456672df2d0532a72b01
> > Content-Type: text/plain; charset=UTF-8
> >
> > Hello list,
> >
> > I need to install a package (php54) on a VM running debian jessie (Here is
> >
Le vendredi 13 mai 2016, 08:31:55 Paolo Cavallini a écrit :
> Hi all,
> my Libreoffice fails to generate a series of document starting froma a
> template and a database. It used to work, but historically it has always
> been a fragile solution. For instance, I was never able to send the
>
Le vendredi 13 mai 2016, 10:01:53 Gene Heskett a écrit :
> The system is wheezy, 32 bit except for the running kernel, all up to
> date but with quite a few added packages as my interests are best
> described as eclectic.
>
> The error is:
> p11-kit: invalid config filename, will be ignored in
Did I already told you about Opera
:-D)
As far as I remember, it has nothing to do with the OS, nor with the browser
or the desktop manager but with the windows manager. In 1999 (perhaps 2000)
when Gnome was to be loaded carefully one package at a time, NextStep or
Nautilus windows manager (I can't remember which, perhaps a third
Hi
I just upgraded to Stretch. At boot I get a warning: " No
symbols table" (actually it is in French: "pas de table des
symboles"). Nevertheless everything works, except my
access point: "modprobe iwlwifi.ko" can't find this
module in the kernel directory, but this module is there.
I
Hi
I just upgraded to Stretch. At boot I get a warning: " No
symbols table" (actually it is in French: "pas de table des
symboles"). Nevertheless everything works, except my
access point: "modprobe iwlwifi.ko" can't find this
module in the kernel directory, but this module is there.
I
Hi
I got rid of network-manager: it endlessly came back to the config it got
when I installed Stretch, and couldn't even resolve the URL of the debian
repositories.
But I have a problem with wicd: it knows about my two wired interfaces, but
doesn't allow me to configure a connection on one
I have my own DNS config t so that my home LAN can access internet (with SNAT)
to "the" internet which I created under Redhat 7.2! It did work on a Redhat
box with Systemd, NetworkManager , and the bind9 RPM. On Debian the
bind9.service tries to start when the net interfaces are not ready.But
I was just going to give up , and I even installed shorewall, when my last
attempt with my very old iptables config (from redhat 7.2) did work. I of
course to still get rid of stupid systemd config, but I don't really care since
my server is allways up!. Thank you anyway for your hints.
Jacques
On several USB keys used for installation (or try of) I copied iso files of
more or less MB, and the remaining space (of 15 or 31MB is inaccessible (non
alloué in french). in
https://www.debian.org/releases/stable/amd64/ch04s03.html.fr it is said you can
recover this:
L'image hybride
Le jeudi 15 février 2018, 11:44:36 CET Henning Follmann a écrit :
> On Thu, Feb 15, 2018 at 05:01:52PM +0100, Rodary Jacques wrote:
> > With NetworkManager, /etc/network/interfaces has only the loopbak
> > interface, and I can't use wicd which can't deal with two w
Why can't I access wikis from a Debian box:
Forbidden
You are not allowed to access this!
is the message I get.
Le jeudi 15 février 2018, 11:44:36 CET Henning Follmann a écrit :
> On Thu, Feb 15, 2018 at 05:01:52PM +0100, Rodary Jacques wrote:
> > With NetworkManager, /etc/network/interfaces has only the loopbak
> > interface, and I can't use wicd which can't deal with two w
Le vendredi 16 février 2018, 06:42:52 CET rhkra...@gmail.com a écrit :
> On Thursday, February 15, 2018 08:42:14 PM Rodary Jacques wrote:
> > Why can't I access wikis from a Debian box:
> > Forbidden
> > You are not allowed to access this!
> > is the message I get
With NetworkManager, /etc/network/interfaces has only the loopbak interface,
and I can't use wicd which can't deal with two wired interfaces. And, Henning
Follmann, my English is too poor to explain clearly my setup which is the
standard one when your ISP gives you one routable address and you
Le samedi 17 février 2018, 16:20:06 CET Roger Price a écrit :
> I am trying to net install stretch i386 on an EeePC using a wired connection.
> I
> chose my ISP as the mirror, but the installation hangs on "Configure the
> packet
> management tool (APT)" [french text reads "Configurer l'outil
"To erase the ISO 9660 superblock of debian-9.3.0-amd64-netinst.iso do
umount /dev/sde1
dd if=/dev/zero bs=2048 seek=16 count=4 conv=notrunc of=/dev/sde
But first make sure that /dev/sde is indeed the medium you want to erase."
I did that before the result is :
dd if=/dev/zero bs=2048
Because when I did , witen iI just installed Jessie in April 2016, my
mailbox which is dedicated to debian-user was flooded with useless or even
stupid posts. Sorry for my fellow countrymen.
Salut. Jacques
Le lundi 19 février 2018, 08:12:57 CET Reco a écrit :
> Hi.
>
> On Mon, Feb 19, 2018 at 03:29:50AM +0100, Rodary Jacques wrote:
> > > Even if it did, the firewall have not come into play.
> > > Since the user saw HTTP 403 it means that HTTPS connection was
>
Le vendredi 16 février 2018, 12:03:56 CET Thomas Schmitt a écrit :
> Hi,
>
> Rodary Jacques wrote:
> > I did subscribe in april 2016,
>
> The mail header X-Spam-Status in your mail to the list does not contain
> the test "LDOSUBSCRIBER". So curr
Le dimanche 18 février 2018, 21:47:59 CET Roberto C. Sánchez a écrit :
> On Mon, Feb 19, 2018 at 03:29:50AM +0100, Rodary Jacques wrote:
> > what is SNI?
>
> https://en.wikipedia.org/wiki/Server_Name_Indication
>
> Essentially, there was a time when you could not host
Le vendredi 16 février 2018, 19:53:44 CET Reco a écrit :
> Hi.
>
> On Fri, Feb 16, 2018 at 10:38:49AM -0500, Greg Wooledge wrote:
> > On Fri, Feb 16, 2018 at 10:30:31AM -0500, Gene Heskett wrote:
> > > On Friday 16 February 2018 07:08:57 Rodary Jacques wrote:
>
When I reboot, what program is responsible for "CT-based firewall rule"
(dixit jounalctl). I would like to have my own firewall rules, and for now, I
must flush those "CT-based firewall rules" before I set my owns.
Again it's not too important, since I don't reboot very often, but I would
1/ No the same removable device doesn't always receive the same /dev/sdX.If you
unmount it ( umount /dev/sdX) and plug it again, it can be called /dev/sdY (I
suppose the kernel keeps tne name in memory for some time).
2/ use "mount" without arguments., plug your flash drive and run "mount"
Sorry for my last post: I sent a draft mail instead of the corrected
one. Let's go back to my own concern: dnsmasq and soa,
if you don't mind. Here is my dnsmasq.conf file:
resolv-file=/etc/dnsmasqresolv.conf
interface=eno1
interface=wlp3s0
no-dhcp-interface=enp2s0
I learnt about dnsmasq when I used Tor to see wiki, thanks for this
hint. For now it works but I am not sure your help about auth-soa is all I need
to get
notifying to the other name server. I just added this line:
I finally surrendered, and now use dnsmasq instead of bind. But
in my setup with named, my box was Start Of Authority, and when there
was a change and reload of the zone files, the only other name server
was notified, before the TTL is over. How can I do that with dnsmasq?
If the
For the time being, my main concern is to keep my connection up! I did
succeed, without succeeding for long. Each time I rebooted I had no access to
interness. Three
times (or more) I couldn't have a full access including on my home wifi
access point. I even reinstalled Stretch two times,
49 matches
Mail list logo