Is there some way that I can use the Sun Linux install binary and
convert it to a deb so that when Blackdown releases theirs, my system
will automatically upgrade to their version? Actually, Blackdown has a
binary install version for 1.4.1 beta but no deb package. Is it
possible to use this and
thought it was something along those lines.
mdevin I don't mean this email to be any criticism of the speed
mdevin at which java .debs are released. More of an inquiry as
mdevin to whether there is anything that I can do about it.
Tell Sun you want .debs. This is a political
I have a ASUS A7V8X mother-board with a built in lan which I think is a
Broadcom 4401 10/100.
I have searched high and low for any mention anywhere of anyone using
this with linux and can't find anything.
Can someone tell me what kernel module will work with this Broadcomm 4401?
Note that I am
On Mon, Nov 11, 2002 at 19:18:04 +1000, mdevin wrote:
I have a ASUS A7V8X mother-board with a built in lan which I think is a
Broadcom 4401 10/100.
I have searched high and low for any mention anywhere of anyone using
this with linux and can't find anything.
Can someone tell me what
I have a ASUS mobo (A7V8X) with a 10/100 Broadcom network card built in
(not the gigabit one). The CD that came with the mobo has a linux
driver on it. It is for RedHat, but it also has the source in a tar
gzip file and instructions on how to compile it and use it.
I didn't think that there
On Wed, Nov 13, 2002 at 12:04:28 -0500, Edward Guldemond wrote:
On Thu, Nov 14, 2002 at 01:30:10AM +1000, mdevin wrote:
I have a ASUS mobo (A7V8X) with a 10/100 Broadcom network card built in
(not the gigabit one). The CD that came with the mobo has a linux
driver on it. It is for RedHat
I am having an ongoing battle to get my network card to work. It built
in on my ASUS A7V8X mobo and uses a broadcom 4400 driver which is on the
CD that came with the motherboard.
Now, I have the module compiled for my particular kernel version
(2.4.18). In fact, I just recompiled my kernel and
On Thu, Nov 14, 2002 at 07:26:10 -0500, Seneca wrote:
On Thu, Nov 14, 2002 at 03:45:52PM +1000, mdevin wrote:
I am having an ongoing battle to get my network card to work. It built
in on my ASUS A7V8X mobo and uses a broadcom 4400 driver which is on the
CD that came with the motherboard
On Fri, Nov 15, 2002 at 01:02:13 +0100, Eduard Bloch wrote:
#include hallo.h
* mdevin [Fri, Nov 15 2002, 09:38:11AM]:
I compiled the module bcm4400.o against the kernel-headers-2.4.18
package (ie. the one for my kernel-source 2.4.18), so I don't understand
these unresolved symbol errors
On Sat, Nov 16, 2002 at 18:16:00 -0800, nate wrote:
mdevin said:
/etc/init.d/portmap: No such file or directorydpkg: warning - old
pre-removal script returned error exit status 1 dpkg - trying script from
the new package instead ...
/var/lib/dpkg/tmp.ci/prerm: /etc/init.d/portmap
On Sun, Nov 17, 2002 at 18:49:40 -0800, nate wrote:
mdevin said:
In my most recent attempt I deleted the /var/lib/ldap/* files, put my
slapd.conf file in place and started slapd. However, when I try to
migrate the base system I get Invalid credentials errors.
don't use ldapadd, use
On Mon, Nov 18, 2002 at 00:13:28 -0500, Derrick 'dman' Hudson wrote:
On Sun, Nov 17, 2002 at 07:45:37PM -0800, nate wrote:
| mdevin said:
| On Sun, Nov 17, 2002 at 18:49:40 -0800, nate wrote:
|
| Thanks, it worked straight away. But you have scared me now. I want to
| migrate over
On Sun, Nov 17, 2002 at 23:11:56 -0800, nate wrote:
mdevin said:
Can you spell that out even more for this ldap newbie?
In my slapd.conf I do have the following:
rootdn cn=admin,dc=mycompany,dc=com
rootpw {SSHA}JuaWFhw+AXDgppTgOJPtpZARL1PpWRoj
you sure thats right
Agh, I am going crazy here. Going very basic now and still can't
seem to be able to use ldapadd like the documentation suggests. Here is
what I have just tried.
1. Stopped slapd:
/etc/init.d/slapd stop
2. Removed all files in /var/lib/ldap/
rm /var/lib/ldap/*
3. Created a
Sorry for starting a new thread, but I was getting lost in the other
about hdparm since it started out as about KDE.
On Thu, Nov 14, 2002 at 07:03:16PM +0530, Sandip P Deshmukh wrote:
# hdparm /dev/hda
/dev/hda:
multcount= 16 (on)
I/O support = 1 (32-bit)
unmaskirq= 1 (on)
On Mon, Nov 18, 2002 at 10:26:22 -0500, Derrick 'dman' Hudson wrote:
On Sun, Nov 17, 2002 at 11:11:56PM -0800, nate wrote:
| mdevin said:
|
| Can you spell that out even more for this ldap newbie?
| In my slapd.conf I do have the following:
| rootdn cn=admin,dc=mycompany,dc=com
On Mon, Nov 18, 2002 at 16:16:57 +0100, Emil Pedersen wrote:
So are the read times as expected for an IDE ATA133, 7200RPM, 40GB drive?
Certainly not. Bellow is what I got from my IBM 7200 rpm disk, (using
UDMA66):
I only just got this computer and hard drive 1 week ago and it is
supposed
I have an just checked the hdparm output on another computer for an
earlier model Western Digital drive which is ATA100, 7200RPM, 40GB.
Therefore this drive should not perform as well. Here is what I get:
Note that the kernel being used on this machine also has compiled support
for using DMA by
Actually, some more digging shows some new support in the 2.5 kernel for
the VIA VT8235 chipset which is on my mobo. It seems that udma6 can
then be enabled by passing 'ide0=ata66' to the kernel at boot time.
(Note that I do have the drive connected using an 80 pin ATA133 cable).
Hmmm, I don't
On Mon, Nov 18, 2002 at 12:47:09 -0500, Mike Dresser wrote:
On Tue, 19 Nov 2002, mdevin wrote:
# hdparm -i /dev/hdc
/dev/hdc:
Model=WDC WD400BB-32AUA1, FwRev=18.20D18, SerialNo=WD-WMA6R3707054
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
# hdparm -i /dev/hda
On Mon, Nov 18, 2002 at 17:04:44 -0800, Alvin Oga wrote:
thats a good option, you might also wanna try
hdparm -c3 -d1 -u1 /dev/hda
-u1 allow the system to process other systeminterrupts
while waiting for the disk
Yep, tried that too but each time I see errors in syslog and the
Another thing: I just noticed that everytime I send and email now, the
log screen for slapd spews heaps of stuff. I guess postfix is already
communicating with it for some reason, although I am not sure what.
There are is far too much info flying off the screen for me to figure
out what is
On Mon, Nov 18, 2002 at 17:53:44 -0800, Alvin Oga wrote:
=== CAUTION
=== playing will hdparm options -- you risk losing data on your disks
Yeah, I have read that and it worries me.
you're supposed to do hdparm testing on your spare disk that you
dont care about
- or
I really appreciate the effort you and others have put into helping me
with this problem. Unfortunately, I won't be able do things like
compile a 2.5 kernel or re-boot with ide0=ata66, until I return from
work in about 5 days time. I don't want to do stuff like that remotely.
The first thing I
On Tue, Nov 19, 2002 at 11:04:49 +0100, Emil Pedersen wrote:
[slightly change/addition of topic]
It seems like you could try 2.4.20-pre2-ac5 (or later I guess) instead
of stepping to 2.5, at least the change log says Add VIA vt8235 IDE
support.
Excellent. I will compile one when I get back
On Wed, Nov 20, 2002 at 18:16:34 -0500, Derrick 'dman' Hudson wrote:
On Tue, Nov 19, 2002 at 01:24:18PM +1000, mdevin wrote:
| One thing interesting though is that if I enter my proper system
| password then ldap refuses me once and gives another Password: prompt.
| If I then enter
idea to send mail directly
rather than through a smarthost when you are on an intermittent PPP
link.
Thanks.
mdevin.
* dynamic IP addresses whether they
were used for spam or not. So this blocking probably had nothing to do
with the previous user of that IP address spamming, it might as well
have been a generic block.
Hmmm, that is a good reason to use a smarthost indeed.
Thanks.
mdevin.
I have decided to purchase a new scanner and printer - especially since
Canon seem unwilling to help development of drivers for their scanners.
I intend to ditch my Canon models to a friend and won't buy Canon again.
I was considering one of those combo units with the printer and scanner
together
OK, just need a little help here trying to install realplayer on my
debian potato box.
I went to the real.com site and downloaded their
rp8_linux20_libc6_i386_cs2.bin file. But then I did a bit of google
searching and found that there is an installer .deb for it but it is
only in woody / sid and
On Mon, Jul 16, 2001 at 06:24:10AM +0200, Joost Kooij wrote:
On Mon, Jul 16, 2001 at 01:51:37PM +1000, [EMAIL PROTECTED] wrote:
OK, just need a little help here trying to install realplayer on my
debian potato box.
I went to the real.com site and downloaded their
On Mon, Jul 16, 2001 at 11:21:53AM +0200, Joost Kooij wrote:
This is what I hoped would not be the case. The new debconf in turn
depends on perl 5.6.1, you don't want to dpkg -i with all that.
What gives?
A dead end, unless you can switch to four wheel mode and upgrade to
testing or
Hi all,
What is the best (simplest) way to read .doc files from within Mutt?
For example, I can read .pdf files straight away on trying to open their
attachments and it automatically uses xpdf (which is loaded on my
system).
So, two questions:
1. What is the best, quickest, simplest, smallest
Everytime I try to open a .pdf file with acroread it gives me the
following error:
Exited with error code: 0x400e0009.
I am running potato and xpdf works OK - but it doesn't display the fonts
in the .pdf file properly.
Is there something wrong with acroread or my system?
Thanks.
Mark.
On Mon, Jul 23, 2001 at 09:36:19PM +0200, Alexander Steinert wrote:
What is the best (simplest) way to read .doc files from within Mutt?
/etc/mailcap:
application/msword; /usr/bin/antiword '%s'; copiousoutput;
description=Microsoft Word Text; nametemplate=%s.doc
and (if you want)
I am trying to learn a little more about just what daemons I need
running for the system to work and what I can do without.
Now, when I installed Debian, I told dselect to not install things like:
ftpd, telnetd, fingerd, talkd, and identd. From memory, the installer
wanted to put these on by
Hi all you vim fans.
Is it possible to colour code text in vim? What I would like to do is
make vim colour my .c files while I edit them. For example, it would be
good to see all the comments coded a different colour.
How do you do this?
Thanks.
Mark.
I am getting totally frustrated with trying to print .pdf files.
Here is my setup:
Printer: HP1220 - Laser with post-script level 2 emulation
Print driver: CUPS (the potato version - cupsys_1.0.4-9_i386.deb)
What happens is, I have heaps of trouble trying to stop the edges of
pages being chopped
On Sun, Sep 16, 2001 at 02:17:25AM -0700, Karsten M. Self wrote:
on Fri, Sep 14, 2001 at 09:37:45AM +1000, [EMAIL PROTECTED] ([EMAIL
PROTECTED]) wrote:
I am getting totally frustrated with trying to print .pdf files.
Here is my setup:
Printer: HP1220 - Laser with post-script level 2
On Sun, Sep 16, 2001 at 02:17:25AM -0700, Karsten M. Self wrote:
on Fri, Sep 14, 2001 at 09:37:45AM +1000, [EMAIL PROTECTED] ([EMAIL
PROTECTED]) wrote:
I am getting totally frustrated with trying to print .pdf files.
Here is my setup:
Printer: HP1220 - Laser with post-script level 2
On Mon, Sep 17, 2001 at 11:02:52AM +1000, [EMAIL PROTECTED] wrote:
On Sun, Sep 16, 2001 at 02:17:25AM -0700, Karsten M. Self wrote:
on Fri, Sep 14, 2001 at 09:37:45AM +1000, [EMAIL PROTECTED] ([EMAIL
PROTECTED]) wrote:
I am getting totally frustrated with trying to print .pdf files.
I noticed that the rtl8139 driver is no longer in the kernel config
options and now the driver for this card seems to be called 8139too
I compiled a module for 8139too when I compiled my 2.4.4 kernel.
However, when I try to connect with my ADSL modem, the kernel freezes
and I have to press the
I have a iptables firewall with 2.4.4 kernel. I have it log packets
that are illegal etc. How do I stop these logs from being displayed
on the active console. I am running potato with Adrian Bunk's stuff
for 2.4 kernel support.
Here is what my /etc/syslog.conf has in it.
auth,authpriv.*
On Sun, May 20, 2001 at 12:23:44PM -0700, Randolph S. Kahle wrote:
I am running an ASUS P2B-DS based MB with dual Pentium III 500 and 512 Meg
RAM.
I switched from RedHat to Debian about two months ago (on this and all
of my other machines). I have been very pleased with Debian (2.2r3).
Basically I am trying to copy everything over to my second hard disk and
then set up to make this the boot device. I know how to change the boot
device in my bios.
The problem seems to be getting lilo on the second hardisk. What I
tried was this:
Edited the /hd2/etc/lilo.conf and changed the
On Mon, May 21, 2001 at 07:15:29AM -0400, [EMAIL PROTECTED] wrote:
Make a tiny partition (= 15MB) on /dev/hda1 with mountpoint /boot.
Have LiLo run from there...
I guess you want to move it, because you want to run M$-Vaporware. If that's
the case, use BootMagic from PowerQuest. That'll
On Mon, May 21, 2001 at 07:04:08PM +0800, Corey Popelier wrote:
This won't be a good answer, but I had a friends machine with an IDE drive
on /dev/hda, and a SCSI drive on /dev/sda, and wanted to boot off the
SCSI. I also got that LILO warning, and got around it by unplugging the
IDE drive,
On Mon, May 21, 2001 at 01:23:56PM +0200, Jan Torben Heuer wrote:
Some of my modules won't load automatically.
They are tuner,sg,ice-scsi.
Must I add some aliases?
You can put them in the file /etc/modules and they will be loaded at
boot time.
HTH
---
Mark.
On Mon, May 21, 2001 at 06:34:56PM -0400, Jens Gecius wrote:
[EMAIL PROTECTED] writes:
Basically I am trying to copy everything over to my second hard disk and
then set up to make this the boot device. I know how to change the boot
device in my bios.
The problem seems to be getting
On Thu, May 24, 2001 at 03:15:08AM -0400, [EMAIL PROTECTED] wrote:
i have encountered an odd lilo problem.
i have a scsi HD (linux) and an IDE HD (win2k).
i configure lilo, run lilo, and it reports no errors.
reboot, and lilo hangs.
unplug IDE drive, run lilo again, and it reports no
Is there any free mail accounts (like hotmail etc.) that allow you to
download your mail so that you can read it with mutt say? Instead of
having to view it through the web browser when connected to the
internet.
I want something that you can use fetchmail or something similar to
download the
comment above) that mdevin is on a dialup link and doesn't want to have to
bring the link up and tie up a phone line while reading mail over that slow
link.
Yep, that is exactly right. I have a p90 with only 16Mb ram and a
slow 28.8 pcmcia modem. Needless to say it doesn't run Netscape well
On Mon, May 28, 2001 at 12:47:30AM +0200, Raffaele Sandrini wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
I have an 2.4 kernel installed but with the old fashioned /dev-node system.
What is the easiest way to enable and ONLY USE the new DEVFS?
Take a look at the
On Sun, May 27, 2001 at 08:11:07PM -0500, [EMAIL PROTECTED] wrote:
Hi,
I didn't have much luck with lilo on my system either, but grub has
worked beautifully for me. Its configuration is really simple, though
you will have to edit the /boot/grub/menu.lst file yourself.
The (or A, or
On Sun, May 27, 2001 at 08:50:42PM +0100, Phillip Deackes wrote:
On Sat, 26 May 2001 22:07:20 +0100
Phillip Deackes [EMAIL PROTECTED] wrote:
A while ago I compiled the 2.4.4 kernel but went back to 2.4.3 when I
found I was getting a long pause during boot-up,just after this:
'Configuring
On Mon, May 28, 2001 at 10:04:33PM -0500, [EMAIL PROTECTED] wrote:
All,
The Debian FAQ suggests the command 'apt-get source pkg' to download
source code for a particular package.
When I try this, apt-get advises me that I need source lines in my
sources.list file.
What would be the
On Sat, Jun 09, 2001 at 01:04:28PM +0100, Anthony Campbell wrote:
Is there anything for Linux that provides at least some of the
facilities of Powerpoint?
I have not tried either of these, but you could check these:
magicpoint - It is still in development though and not as
fully functional.
How do you set up Mutt so that you can view jpg attachments. For some
reason, I can view html - (mutt fires up lynx for me) and I can view pdf
(mutt fires up xpdf for me), but even though I have gtksee installed I
can't seem to view the jpg attachments. How do I config mutt so that it
will view
I have just installed debian potato again and now I seem to have a
problem with logging in. When I reboot the system and then try to log
in on a virtual terminal as root it refuses telling me login
incorrect. When I log in as a user and then log out and then log back
in as root it works fine.
What does this mean? I see this occasionally in my syslog:
PPP: VJ decompression error
Everything seems to work OK still but just wondered if I need to fix
something?
Thanks.
Mark.
I have just reinstalled debian potato on this system and now some things
don't work as they did before. Now I copied a lot of my config files
before reinstalling so things really should be the same.
Here is a specific example: I run fetchmail after establishing my ppp
connection - it all works
On Mon, Jun 18, 2001 at 06:05:11AM -0400, Steve Barr wrote:
Now I know this has something to do with the virtual terminal not
recognising the keys properly when I type them. It must be that the
word root doesn't have enough characters for the terminal to detect
what type it should be
This is not a debian specific question, but I know there are some
hardware experts out there that may be able to help me and I would much
appreciate it :-)
I am considering upgrading our server at work. I don't fully appreciate
the performance advantage / disadvantages of dual processors and
Thanks for all the replies. They have been most helpful. It seems as
though SCSI is definitely the way to go for this large database server.
Essentially it will be the server for a database with the 486 / slow
pentiums retrieving and writing small amounts of data continuously. So
definitely
On Fri, Jun 22, 2001 at 12:06:24AM +0200, Robert Waldner wrote:
Hi!
I have a machine with a large IDE-disk (hda) and a smaller, but also
faster SCSI-disk (sda). So the system resides on SCSI, bulk data on
IDE. So far, so good. But I can´t, for whatever reason, just boot
completely
When you follow the instructions on Sun's site for installing the
HTMLConverter for Java2, you end up only being able to run the
HTMLConverter.sh file as root. This is because all the directories seem
to have only rw permissions when the archive is extracted and not rwx
permissions.
Is there
these errors in my syslog when trying to
download my mail:
Nov 16 12:07:44 flea fetchmail[455]: starting fetchmail 5.3.3 daemon
Nov 16 12:07:58 flea fetchmail[455]: 262 messages for mdevin at
pop.ozemail.com.au (812090 octets).
Nov 16 12:07:59 flea fetchmail[455]: reading message 1 of 262 (3327 octets)
Nov 16
Last week, I started getting these errors in my syslog when trying to
download my mail:
Nov 16 12:07:44 flea fetchmail[455]: starting fetchmail 5.3.3 daemon
Nov 16 12:07:58 flea fetchmail[455]: 262 messages for mdevin at
pop.ozemail.com.au (812090 octets).
Nov 16 12:07:59 flea fetchmail[455
Are there any-web based email providers that allow you to sign or encrypt
emails?
Is this even possible to be done?
Would it still require that the computer you use to access the internet
have a copy of your private key, or could this be stored by the
web-based email provider?
Thanks.
Mark.
On Mon, Nov 19, 2001 at 11:40:58AM -0500, Noah Meyerhans wrote:
On Mon, Nov 19, 2001 at 11:22:04PM +1000, [EMAIL PROTECTED] wrote:
Are there any-web based email providers that allow you to sign or encrypt
emails?
http://www.hushmail.com
Would it still require that the computer you use
I have an iptables firewall running on my linux box connected to the
internet with a standard dialup ppp link. Now I have just connected
another debian box and a windows98 box to this firewall box.
So far I have only allowed ssh into the firewall box from the internal
LAN. There are no ports
I don't know what I just did but now all my mail is being bounced by
postfix. Here is part of my logs:
Nov 29 15:12:38 beast postfix/smtp[576]: 236DB1901C:
to=[EMAIL PROTECTED], relay=none, delay=0, status=bounced (Name
service error for domain localhost: Host not found)
host localhost -- gives
I don't know what I just did but now all my mail is being bounced by
postfix. Here is part of my logs:
Nov 29 15:12:38 beast postfix/smtp[576]: 236DB1901C:
to=[EMAIL PROTECTED], relay=none, delay=0, status=bounced (Name
service error for domain localhost: Host not found)
Appologies for any
I just stumbled upon this LIDS (Linux Intrusion Detection/Defense
System) see: http://www.lids.org
I just wanted to know if anyone is using this and what they think of it.
Is it hard to set up? What happens when you do an apt-get dist-upgrade
- will it refuse to change the binaries you want to
I notice that everytime I send mail to the debian-user list, I get
requests to port 113 on my machine by the debian mail server. Here is
an example from my firewall log:
Nov 30 11:31:11 beast kernel: incoming_new_::IN=ppp0 OUT= MAC=
SRC=216.234.231.6 DST=144.134.71.208 LEN=60 TOS=0x00 PREC=0x00
On Thu, Nov 29, 2001 at 08:41:25PM -0600, John Patton wrote:
On Fri, Nov 30, 2001 at 11:31:08AM +1000, [EMAIL PROTECTED] wrote:
I just stumbled upon this LIDS (Linux Intrusion Detection/Defense
System) see: http://www.lids.org
I just wanted to know if anyone is using this and what they
On Thu, Nov 29, 2001 at 06:36:32PM -0800, Alvin Oga wrote:
hi ya mark
are you trying to detect that files has changed
or are you trying to protect files from being changed ??
Well, I was really trying to weigh up the pros / cons of both. It
seemed to me from first appearances that
On Thu, Nov 29, 2001 at 05:58:48PM -0800, nate wrote:
quote who=
prepared to open up port 113 if I could guarantee that the program
would not give my real user id and there is no way that it could be
compromised.
i don't think theres anybody who could give a network daemon
a complete
On Fri, Nov 30, 2001 at 02:11:04PM +0100, Mathias Gygax wrote:
On Fre, Nov 30, 2001 at 11:31:08 +1000, [EMAIL PROTECTED] wrote:
I just wanted to know if anyone is using this and what they think of
it.
I think it's a good protection that bring's a linux system a step
further in the
On Sat, Dec 01, 2001 at 02:32:06PM +0100, Mathias Gygax wrote:
On Sam, Dez 01, 2001 at 03:32:51 +1000, [EMAIL PROTECTED] wrote:
Is it easy to get rid of it, if it causes me more trouble than it is
worth?
run an unpatched kernel, disable it with kernel option security=0
(e.g. lilo boot
I am seeing double to quadruple of lots of emails on this list. Is
everyone else seeing the same or is there something that postfix is
doing to me since I fiddled with its main.cf?
For example here is how my list looks in mutt for the debian-user list
currently. I have configured mutt to sort
of errors etc.
set daemon 900 # puts it in background, polls every 900secs (15mins)
poll pop.ozemail.com.au with proto POP3
user 'mdevin' there with password 'x' is mark here
warnings 3600 antispam 571 550 501 554
Can anyone see any
On Sat, Dec 01, 2001 at 06:22:07PM -0600, DvB wrote:
ben [EMAIL PROTECTED] writes:
On Saturday 01 December 2001 03:34 pm, Dave Sherohman wrote:
On Sun, Dec 02, 2001 at 09:02:29AM +1000, [EMAIL PROTECTED] wrote:
I am seeing double to quadruple of lots of emails on this list. Is
Check this out, it is a simple cut/paste from my mutt main view. Sorry
the thread patterns don't come out quite the same. But this is one
thread currently on debian-user.
53 O 12/01 Jens Luedicke (0.5K) LILO and FreeBSD
54 O 12/01 Jens Luedicke (0.7K) t*
55 O 12/01 ben
On Sat, Dec 01, 2001 at 10:58:28PM -0800, Alvin Oga wrote:
hi ya mark
duplicates ( to you) from me is probably just my reply to you and the
deb list... you may or may not ( but probably will ) get 2 copies of this
email...depends on how the mta is configured ...
otherwise... i dont see
On Sun, Dec 02, 2001 at 08:46:12AM +, Glyn Millington wrote:
[EMAIL PROTECTED] writes:
I haven't changed anything in my fetchmailrc, /etc/postfix/main.cf, or
.procmailrc files. And yet it seems to have stopped now.
Very confusing?
Mark,
Don't know why you are getting them,
On Sun, Dec 02, 2001 at 01:28:07PM +, Glyn Millington wrote:
[EMAIL PROTECTED] writes:
Don't know why you are getting them, but I have this in .procmailrc which
weeds duplicates pretty effectively.
# Nuke duplicate messages
:0 Wh: msgid.lock
| $FORMAIL -D 8192 msgid.cache
On Tue, Dec 04, 2001 at 11:57:57AM -0800, Empty One wrote:
I realise this may be a little late, it being the
fourth and all, but i'm a behing in reading the list.
Are you sure you aren't leaving the origional message
on the server? I know that with some mail programs,
every time you scan
On Mon, Dec 03, 2001 at 02:21:07PM +0100, Mathias Gygax wrote:
On Son, Dez 02, 2001 at 08:47:41 +1000, [EMAIL PROTECTED] wrote:
Don't forget to protect lidsadm binary. This is the interface for
supplying a password to deactivate the features in the kernel.
The password can't be cracked
On Sun, Dec 02, 2001 at 06:06:52PM +0100, martin f krafft wrote:
* [EMAIL PROTECTED] [EMAIL PROTECTED] [2001.11.30 14:16:57+1000]:
Also, the openwall patch that Alvin Oga recommended seems to only be for
2.2 series kernels - so I guess that is not possible for a 2.4 kernel.
And I really
On Wed, Dec 05, 2001 at 12:22:21PM +0100, Krzysztof Mazurczyk wrote:
Is your mail server protected by netfilter firewall? If so, I'm suppose that
problem of duplicating mail is caused by netfilter. Let's consider following
scenario:
Yep, using iptables on 2.4.14 kernel running potato with
I am looking at purchasing a UPS and trying to decide between APC and
Best (Invensys). Best apparently used to release their source code for
their unix driver - which is a big plus. But this is no longer the
case. Best provides binary versions of drivers for linux which is good.
Apparently APC
On Wed, Dec 05, 2001 at 12:48:13AM -0600, Jor-el wrote:
On Sat, 1 Dec 2001, David B Harris wrote:
On Sun, 2 Dec 2001 11:36:20 +1000,
[EMAIL PROTECTED] wrote:
SNAT would be. However, you better make sure that each time the IP
address of your interface changes, your firewall script
On Sun, Dec 09, 2001 at 06:52:49PM +, Am?rico Rocha wrote:
Hi all,
I'm trying to forward port ssh (22) to another computer
on my intranet
The network topology is simple: 192.168.0.12, is connected
on eth0 to dhcp, and eth1 acts as a NAT to the intranet
consisting on 9 computers.
I have changed where procmail puts mail for each user with the following
settings in /etc/procmailrc:
PATH=/bin:/usr/bin:/usr/local/bin
MAILDIR=$HOME/mail # all mailboxes are in mail/
DEFAULT=$MAILDIR/inbox
LOGFILE=/dev/null
SHELL=/bin/sh
So now the spoolfile for each user is in
Is there a good debugger for C programming. You know, the kind of thing
that lets you step through a line at a time running your program and put
watches on variables etc.
I am doing an assignment for Uni, and have been just adding printf
statements in my code to check variable values etc. But
On Tue, Oct 02, 2001 at 09:09:44AM -0700, Peter Jay Salzman wrote:
begin: Daniel Toffetti [EMAIL PROTECTED] quote
Is there a good debugger for C programming. You know, the kind of
thing that lets you step through a line at a time running your
program and put watches on variables etc.
I am trying to set up a new ppp connection with pppconfig. I know the
basics of this and have set up ones through bigpond and ozemail and can
connect to each with pon bigpond / pon ozemail.
Now this time I am trying to connect through my local university (QUT).
I went through the same process in
On Wed, Oct 17, 2001 at 11:51:28AM +1000, [EMAIL PROTECTED] wrote:
I am trying to set up a new ppp connection with pppconfig. I know the
basics of this and have set up ones through bigpond and ozemail and can
connect to each with pon bigpond / pon ozemail.
Now this time I am trying to
Earlier I set my tabstop to 4 to give me some more screen room in my C
program .c files. The problem is that when I print out the source code
(eg. for a Uni assignment) or when someone else edits it, the tabstops
are by default 8 spaces.
What is the best way to deal with this?
What I have
1 - 100 of 148 matches
Mail list logo
