Hi,
I recently installed Debian v2.2r3 and I installed
the DHCP client as well.. when debian boots, DHCP assigns eth0 an IP (which it
is supposed to do, in this case 192.168.1.4) then it also assigns the loopback
(/dev/lo) an IP (192.168.1.5). If I look at my DHCP clients table on my
DHCP
Hello,
I am a former redhat, turned debian user, and was wondering if someone
could inform me how to restart inetd... I am so used to redhat's
/etc/rc.d/init.d/ scripts, that I've never started/stoped/restarted
services any other way. By reading the inetd man page, I know you have
to send it a
Thanks, to those that answered my previous question.. I have another
question... the reason I wanted to restart inetd is because I am trying
to get telnetd and ftpd working. I
added the following entries to inetd.conf:
ftpstreamtcpnowaitroot/usr/sbin/tcpd
well, I found the problem... of course, 'twas my own stupidity that
caused it :-) The hosts.allow file needs to have a newline after the
last entry in order to work. If I wasn't half asleep, I would've
thought to look in /var/log/daemon.log before I posted :-) Sorry, about
the wasted bandwidth
are some of your experiences running the 2.2.x
kernel with Debian?
Thanks,
--
Aaron Walker
[EMAIL PROTECTED]
http://iconmedia.com/aaron/
hello,
Just installed 2.0. I haven't used debian since 1.2 (been using RH),
so I don't remember how to do all of this stuff...
anyways,
how would I go about setting up debian for regular non-anonymous ftp?
and also, can someone tell me or guide to a doc how do setup ppp?
thanks,
Aaron
shared object file: No such file or
directory
Then it just sits there. It doesn't freeze (I can still do shift-page
up/down).
Anyone know what the problem is?
Thanks,
Aaron Walker
When I run xvidtune, it works for the time being. When I exit X then
launch X again it's back to what it was before I ran xvidtune. How can
I get xvidtune to save the changes it makes?
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble?
For ATA drives, you need a special ISA card. My HD (Maxtor 3.5) supports it,
but
I haven't bought the add-on card yet. It supposed to be superFAST (I think
almost
as fast as SCSI). I think the card is around $70 from CompUSA.
Britton wrote:
I am looking at buying another system myself. I
As it says on my HD box:
Buffer Size:
256KB
Average Seek time:
10MS
Data Transfer Rate:
33.0 MB/Sec
(Ultra DMA-Mode 2)
Ultra DMA is also known as Ultra ATA. It has twice the speed of IDE drives.
George Bonser wrote:
ATA is, I do not think the problem I think ATA is short for ATAPI.
.
Dec 29 18:59:14 speedy pppd[248]: Exit.
Does anyone know what this means? Thanks for whatever help you guys
have.
--
Aaron Walker
[EMAIL PROTECTED]
http://www.iconmedia.com
(954)418-0817
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e
\qpassword\q
Tim Sailer wrote:
Martin Bialasinski wrote:
On Wed, 24 Dec 1997, Aaron Walker wrote:
When I try to dial my ISP using /etc/ppp.chatscript in my ppp.log file I
get this message:
Dec 24 09:52:42 speedy chat[827]: ATDT7454342(a carrot goes here)M
Dec 24 09:52
Mitchell wrote:
On Mon, 29 Dec 1997, Aaron Walker wrote:
The problem was: When I dial into my ISP, I get a prompt that says: host:
here I
type ppp then my username and password. How would I get it to type ppp?
Would I
just change my ppp.chatscript to say?
ABORTNO DIALTONE
Does it really matter? On my machine, the only person that can view the logs,
is root.
Hamish Moffatt wrote:
On Mon, Dec 29, 1997 at 02:06:58PM -0500, Brandon Mitchell wrote:
On Mon, 29 Dec 1997, Aaron Walker wrote:
password \qpassword\q
\qpassword\q
Incidentally, you
How would I go about changing my domain name? Thanks for your help.
--
``
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL
Elm under any user besides amwalker and root, when I try
to compose a message it says: Could not create file /tmp/snd.1730
(Persmission denied)
Thanks for any help.
--
Aaron Walker
[EMAIL PROTECTED]
http://www.iconmedia.com
(954)418-0817
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word
see anything helpful. Thanks.
--
``
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL PROTECTED
.
--
``
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL PROTECTED]
``
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail
this. It is the last entry in the log. To see
the exact results, goto http://www.iconmedia.com/aaron/ppplog.gif
Does anyone have any suggestions? Thanks.
--
``
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED
this. It is the last entry in the log. Does
anyone have any suggestions? Thanks.
--
``
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL
.
--
``
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL PROTECTED
How would I go about disconnecting a remote user from my machine? Thanks
in advance.
Also... I want to install Apache. Where is the best place to intall
this? Thanks again.
--
``
Aaron Walker
Work:
Site: http://www.iconmedia.com
has anyone successfully run chkexploit on Debian 1.3.1? Does it have to
be in a certain directory? I put it in my home directory and it says:
chkexploit: can't find 'strings'
Any ideas?
--
`
Aaron Walker
Work:
Site
-0500, Aaron Walker wrote:
Thanks to everyone for your help. I got Debian to see my NE1000 at 0x320
and
IRQ 5. The problem was that in the /etc/conf.modules file it said:
options ne io = 0x320 irq = 5
I changed it to:
options ne io=0x320 irq=5 (I just got rid of the spaces between
in? On my system,
it says
Most of the programs included with the Debian GNU/Linux system are
redistributable... and so on.
is there a way to change this? Thanks for your help.
--
`
Aaron Walker
Work:
Site: http
, etc.) If anyone has successfully done this, I would
appreciate your help. Thanks very much.
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http
I tried what you suggested but it just hangs when trying to load the module.
Any other suggestions?
Hamish Moffatt wrote:
On Sun, Dec 21, 1997 at 12:20:34AM -0500, Aaron Walker wrote:
Has anyone successfully setup a NE1000 card (not a clone) using Debian
1.3.1 with the loadable kernel
] .
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL PROTECTED
. Thanks very much.
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL PROTECTED
the kernel source:
gzip -dc linux-2.0.33.tgz | tar xvB
tar xpvf linux-2.0.33.tgz
They both produced the same error.
Any ideas? Please help.
Thanks.
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL
], Systems/Network | work: 353.4844
Division of Engineering Computing Services | page: 222.5875
On Fri, 19 Dec 1997, Aaron Walker wrote:
I am trying to unpack the newest kernel source in /usr/src. It goes
along fine until it stops and says:
tar: Skipping to next header file
] .
Trouble? e-mail to [EMAIL PROTECTED] .
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL PROTECTED
that it
is an invalid boot disk
WHat should I do?
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
--
`
Aaron Walker
Work:
Site
What I realized after I wrote this was that he was trying to boot with the root
disk.
Oliver Elphick wrote:
Eloy A. Paris wrote:
Aaron Walker [EMAIL PROTECTED] wrote:
: I just installed Debian 1.3.1 on my 486 w/4MB RAM. I made Debian hard
: drive bootable because it's the only
for ever when this message pops up. Could it be from
low-memory? I though you were able to run Debian w/4MB RAM. Please
HELP!
Thanks.
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED
.
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL PROTECTED
Are you saying that with I can use any protocol (IPX, TCP/IP, or NetBEUI) with
Samba on the win95 box?
Remco Blaakmeer wrote:
On Sun, 14 Dec 1997, Aaron Walker wrote:
If it uses TCP/IP, how does Win95 see it in Network Neighborhood?
Fenrick wrote:
Lets say I have a Win95 box
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL PROTECTED
.
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http://www.iconmedia.com/aaron
Email: [EMAIL PROTECTED
THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED]
Personal:
Site: http
I have overcome this before ny linking tty0 to tty1 (or the other way around,
don't remember). For some odd reason it didn't work this time.
Oliver Elphick wrote:
Aaron Walker wrote:
When I try to start the X server for XFree86, I get the following error:
_X11TransSocketUNIXConnect
The card is an internal PnP card.
George Bonser wrote:
You have a cable modem that installed into your computer? Most cable
modems are external with an ethernet card installed in the computer.
On Sat, 13 Dec 1997, Aaron Walker wrote:
Has anyone successfully setup a PnP Cable-Modem
and there is a separate cable
between that box and the computer ... that is probably an ethernet coax.
On Sat, 13 Dec 1997, Aaron Walker wrote:
The card is an internal PnP card.
George Bonser wrote:
You have a cable modem that installed into your computer? Most cable
modems are external
Lets say I have a Win95 box and a Linux box. Does Win95 view the samba
connection as TCP/IP or NetBEUI?
Thanks for your help.
--
`
Aaron Walker
Work:
Site: http://www.iconmedia.com
Email: [EMAIL PROTECTED
If it uses TCP/IP, how does Win95 see it in Network Neighborhood?
Fenrick wrote:
Lets say I have a Win95 box and a Linux box. Does Win95 view the samba
connection as TCP/IP or NetBEUI?
It uses TCP/IP.
--
`
Aaron
Has anyone successfully setup a PnP Cable-Modem in Linux?
I'm guessing I will have to use isapnptools to set it up.
If you have been successfull at this, please help.
Thanks for your time.
--
`
Aaron Walker
Work
Has anyone successfully setup majordomo to have a list server? If so, how do
you set it up once you've installed the majordomo package? Thanks for
your time,
Aaron Walker
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
Can someone please tell me what to write in /etc/fstab to mount a cd-rom drive?
Thank you for your time,
Aaron Walker
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Does anyone know how to take a screenshot of the X desktop?
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
When I install Debian, I get up to base 3 and then when I put in the
base 4 diskette, it says 'that doesn't seem like the right floppy'
I tried downloading the base14-4.bin file again but the same thing
happened.
I am going to download the newest version of Debian Linux with Windows
95. How can I convert them to Linux format so that Linux will recognise
the boot disk, root disk, ect. I've heard that their is a utility to do
that, but I can't find it. If you know anything about this please email
me with
How can I install XFree86 on my Debian 1.2 system?
52 matches
Mail list logo