At 11:17 AM 4/6/2008, Hugo Vanwoerkom wrote:
Butch Kemper wrote:
Back in February, I asked a question about problems I was having
with the hard disks sequence flip-flopping when I would boot: disk
#1 would be hda and disk #2 would be hdc; or disk #1 would be hde
and disk #2 would be hda.
I
Back in February, I asked a question about problems I was having with
the hard disks sequence flip-flopping when I would boot: disk #1
would be hda and disk #2 would be hdc; or disk #1 would be hde and
disk #2 would be hda.
I receive answers about using labels with the partitions so, I
I have built a new system using:
Etch with kernel 2.6.18-6-k7
Tyan Thunder h1000E Motherboard
2 Dual-Core AMD Opteron Processors
Two hard drives: #1 on the builtin IDE - hda
#2 on an PCI card - hdc
The system always boots from
At 09:25 PM 2/8/2008, you wrote:
Butch Kemper([EMAIL PROTECTED]) is reported to have said:
I built a system using 4.0r2 net-install and have kernel
2.6.18-5-k7 installed.
The motherboard failed and the replacement board has a different type
ethernet card.
In the kern.log file, I can see
I built a system using 4.0r2 net-install and have kernel 2.6.18-5-k7 installed.
The motherboard failed and the replacement board has a different type
ethernet card.
In the kern.log file, I can see the ethernet card is recognized and
called eth0 but:
The card is not connected to
I am trying to use Sendpage 0.8.6.2 with Debian 2.1.
The program is unable initialize the modem. It sends the initialization
string and then dies waiting for the OK that the modem never sends in
response to the initialization string.
I have successfully used the modem with the minicom
At 06:15 PM 7/30/99 , you wrote:
I have a problem with adding a virtual interface to the ethernet card.
I have put an IFCONFIG command in /etc/init.d/network for the virtual
interface:
ifconfig eth0:1 inet 208.21.250.3 netmask 255.255.255.0
broadcast
I have a problem with adding a virtual interface to the ethernet card.
I have put an IFCONFIG command in /etc/init.d/network for the virtual
interface:
ifconfig eth0:1 inet 208.21.250.3 netmask 255.255.255.0
broadcast 208.21.250.255
These are the messages
I must have been asleep when I tried it the first time. It took two
attempts to make it work this time:
1. Failed to observe that all characters between the : are part of
the password, even the character.
2. Copied all characters between the : in the password of
I need to move several thousand user entries from a Solaris 2.5.1 system to
a Debian system. The problem that I have is to move the encrypted passwords.
I have moved passwords between Debian systems by editing the passwd file
and using 'cut paste. When I tried cutting pasting between
.
2. How to change the diald filter to stop the yo-yo actions.
Thanks for your help.
Butch
Butch Kemper | Free sound advice available
Kemper Associates Consulting Group | 95% sound and 5% advice
830-693-6967 | Refunds cheerfully provided
At 07:53 -0500 on 6/30/98, Miquel van Smoorenburg wrote:
And a new qpopper has been in Incoming since Saturday.
Patches were posted, but today a new series of attacks
proved the patches worthless.
Where can I get that version and the source that goes with it?
Thanks.
Butch
Butch Kemper
file because it is static so I use vi on it.
Butch
Butch Kemper | Free sound advice available
Kemper Associates Consulting Group | 95% sound and 5% advice
830-693-6967 | Refunds cheerfully provided
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
At 14:49 -0500 on 4/12/98, Jeff Noxon wrote:
On Sun, Apr 12, 1998 at 02:41:34PM -0500, Butch Kemper wrote:
I want a script to execute as the Super User. I have tried several things
with the s attribute but have not been successful.
Linux won't let you create suid shell scripts
I want a script to execute as the Super User. I have tried several things
with the s attribute but have not been successful.
Any suggestions will be most appreciated.
Thanks.
Butch Kemper
Butch Kemper | Free sound advice available
Kemper Associates Consulting Group
.
Thanks.
Butch
Butch Kemper | Free sound advice available
Kemper Associates Consulting Group | 95% sound and 5% advice
409-361-2324 | Refunds cheerfully provided
-BEGIN PGP SIGNATURE-
Version: PGPfreeware 5.5.3 for non-commercial use http
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
At 09:23 -0600 on 2/2/98, Nathan E Norman wrote:
On Fri, 30 Jan 1998, Butch Kemper wrote:
:
: I have a Compaq Deskpro 2000 that has an ethernet card that Windows NT
: identifies as Netelligent 10/100 TX PCI UTP Bus 0. The card has a big
: chip
to get the card recoginized
by any of the drivers in the boot disks. I went to the web page, the
Ethernet HOWTO, and some of the references but I was not successful in
determining whicht driver to use.
Does someone have a hint?
Thanks
Butch
Butch Kemper | Free sound advice
, and there is no such directory. Where is my
kernal? I even installed one from dselect and went back and checked
and it still was not there.
Use dselect to download the optional kernel source then you will find it.
Butch
Butch Kemper | Free sound advice available
Kemper Associates Consulting
/ |
| e-mail: [EMAIL PROTECTED]|
+---+
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Butch Kemper
.
And to further confuse the subject, Debian is working normally on the
network. It can DNS, ftp, http.. you name it, to anywhere, intra and
Internet...
I had this problem and solved it by compiling the kernel with the
CONFIG_IP_FORWARD option turned on.
Butch
Butch Kemper
the IP_FORWARD option adds 5K to the
kernel size.
Butch
Butch Kemper | Free sound advice available
Kemper Associates Consulting Group | 95% sound and 5% advice
409-361-2324 | Refunds cheerfully provided
-BEGIN PGP SIGNATURE-
Version
but as a text file. I would suggest trying the download
again and explicitly specify the binary option.
Butch
Butch
Butch Kemper | Free sound advice available
Kemper Associates Consulting Group | 95% sound and 5% advice
409-361-2324 | Refunds cheerfully
configuration changes to sendmail that will allow you to
control who uses your server to relay mail.
Butch
Butch Kemper | Free sound advice available
Brazos Internet Consulting Group | 95% sound and 5% advice
409-361-2324 | Refunds cheerfully provided
of auto-answer mode. Seems that
mgetty wants to answer the call instead of letting the modem do it.
Butch
Butch Kemper | Free sound advice available
Brazos Internet Consulting Group | 95% sound and 5% advice
409-361-2324 | Refunds cheerfully
to an active dns server.
3. The ip address of the dns server in resolv.conf is not correct.
I hope this helps.
Butch
Butch Kemper | Free sound advice available
Brazos Internet Consulting Group | 95% sound and 5% advice
409-696-6057
at boot under 1.2 when it was
working under 1.1?
2. Is there some interaction between the boot command linux
cm206=0x350 and the hanging of the ethernet driver?
3. How do I fix it?
TIA,
Butch
Butch Kemper | Free sound advice
At 9:51 -0600 on 12/11/96, Butch Kemper wrote:
Using the suggestion by Bruce that I boot the system with the command
linux cm206=0x350, the system now boots. However, the system now hangs
when it is loading the WD driver.
Booting from the Debian 1.2 disks dated 96-12-8, I get
'
wd.c:v1.10 9/23/94 ..
eth0: WD80x3 at 0x300 00 00 C0 A6 D2 24 WD8003, IRQ5, shared memory at 0xb800
0-0xb9fff
Does anyone have another suggestion/
Thanks.
Butch
Butch KemperFree sound advice available
Networks 'R Us 95% sound and 5
$
The cursor is left following the last $.
This problem occurs with the boot disks and the the system I built.
The boot disk will comeup on another system but not this one.
I had built a system with 2.0.23 and it was okay.
Does someone have some suggestions? Thanks.
Butch
Butch Kemper
I am attempting to compile bind495-REL and it is failing because the
nlist.h header file is missing.
Obviously, I have failed to install a need package but so far, I haven't
been able to determine which package.
Can someone help me?
Thanks.
Butch
Butch Kemper | Free
31 matches
Mail list logo
