in advance for your help.
Regards,
Santanu Chatterjee
<>
quivalent
command for baseconfig.
The Debian Installation Guide (in "6.2. Components Introduction")
mentions the name of several components of the debian-installer,
among which there is apt-setup. But there is no command called
apt-setup on this minimal Debian system I have here.
Regard
le, I guess I got
no other choice than to hand configure things :-(
But if anyone in the list knows any equivalent command available
in testing/Lenny, please let me know.
Regards,
Santanu Chatterjee
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
installation.
I know that there is a command to setup certain aspects of a debian
installation _after_ the installation. I just cannot remember the name of
that command right now. Please help.
Thanks in advance.
Regards,
Santanu Chatterjee
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
nstead of the memory
card, you should be able to use the serial interface (ttyACM0).
I am not sure though that this is indeed the case here. (In my case, it was
a Motorola L7 Mobile).
Regards,
Santanu Chatterjee
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ch to some project I care
about. That way I try to pay back a little bit to the community that means so
much to me.
Regards,
Santanu Chatterjee
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello Everybody,
This is probably a bit off topic but I don't know where else to ask.
Does anyone here know where can I get Debian Stickers (you know,
with the Debian swirl) in India... anybody who sells such stickers?
I really want to stick that to my laptop :-)
Regards,
Santanu Chatt
Thanks for your response though.
Please keep sending your (I mean everybody) suggestions.
In the meantime, I will try the gammu mailing list and google of course.
Regards,
Santanu Chatterjee
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
SMS to each member in a
group iteratively, which takes a lot of time.
Thanks in advance for your suggestions.
Regards,
Santanu Chatterjee
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
++/Python available 'out of the box').
Does anyone know of anything that fits the above requirement?
Otherwise I might have to start with Sidux and use aptoncd or something
like that to create one.
Regards,
Santanu Chatterjee
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Finally, my USB pendrive is working, i.e. booting fine,
and the installer is also working correctly.
Thanks Adrian and Thierry for your help.
Time to dive a little deeper into debian-installer & Co. :-)
Regards,
Santanu
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubsc
On Fri, Feb 29, 2008 at 7:20 PM, Thierry Chatelet <[EMAIL PROTECTED]> wrote:
> On Friday 29 February 2008 07:15, Santanu Chatterjee wrote:
> > Hello Everybody,
> >
> > I was trying to install a very basic debian system from my 2GB
> > USB Pen Drive. For that, I
On Fri, Feb 29, 2008 at 1:34 PM, Adrian Levi <[EMAIL PROTECTED]> wrote:
> On 29/02/2008, Santanu Chatterjee <[EMAIL PROTECTED]> wrote:
> > When I try to boot from the pendrive, it boots just fine, and the
> installer
> > starts OK. But then, it cannot fin
Hello Everybody,
I was trying to install a very basic debian system from my 2GB
USB Pen Drive. For that, I did the following:
o Formatted my pen drive as a single 2GB FAT16 partition (/dev/sdb)
o Did a "# syslinux -sf /dev/sdb" to make it bootable
o Downloaded
"http://cdimage.debian.org/debia
Hi Everybody,
Can you tell me how do I use Bitstream-Vera-Sans-Mono
font with a2ps, enscript, etc.?
Regards,
Santanu
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi Everybody,
Thanks for replying, and sorry for the late reply from my
end.
Actually, after reading your suggestions, I decided to
try again from scratch on another Debian system (rather,
Debian based Ubuntu 7.04). Strangely enough, I could not
reproduce the problem. After I installed lighttpd
Hi Everybody,
I was trying to install mediawiki1.7 using aptitude. This
package has 'apache | httpd' as one of its dependencies.
I don't want to install apache. lighttpd seems to provide
httpd. So I installed that.
Now, when I tried to install mediawiki1.7, it still tries to
install apache altho
On 12/8/06, Florian Kulzer <[EMAIL PROTECTED]> wrote:
You could maybe work around the problem by going via PDF, i.e.
ps2pdf file.ps
pdfnup --outfile newfile.pdf --nup nxm file.pdf
pdftops newfile.pdf
"nxm" is the nup specification, e.g. 2x3 for two columns by three rows.
You might have to use "
Hi Everybody,
How do I do n-up printing of postscript files in Linux using the layout of my
choice? I can use psnup to convert a .ps file to one with say, 6 logical pages
per sheet. But the problem with this is that the layout used, say, x
logical pages per
column and y logical pages per row (whe
Hi Sridhar,
Does your firefox also crash on www.xilinx.com like mine?
I'm sure it does. If so, like I said in my earlier mail, we
definitely have the same problem.
After reading this thread, I searched for a solution with renewed
enthusiasm, and just now found this:
-
On 12/5/06, Sridhar M.A. <[EMAIL PROTECTED]> wrote:
Hello all,
since yesterday evening, firefox is crashing when I log on to the gmail
account. This happens across all accounts on my box. I get the following
message on the console after it crashes:
The program 'Gecko' received an X Window Syste
On 7/29/06, Santanu Chatterjee <[EMAIL PROTECTED]> wrote:
On 7/22/06, Bruno Buys <[EMAIL PROTECTED]> wrote:
> .
> All the pieces are there, already: v4l2 supplies the video
> stream, codecs are thriving over the internet, the author would only
> have to redirect th
On 7/22/06, Bruno Buys <[EMAIL PROTECTED]> wrote:
.
it seems to me that there must be some lack of interest in this project.
Except for that, I don't see why such a program would be too hard to
write. All the pieces are there, already: v4l2 supplies the video
stream, codecs are thriving over
PVR software
like MythTV or freevo) that will satisfy my requirement.
Thanks in advance for your help.
Regards,
Santanu Chatterjee
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi Everybody,
I am using tvtime to view tv using my PCI TV Tuner card.
The problem is, when I want to record a live program,
I have to close tvtime, and then use streamer to record the
program, otherwise, streamer says /dev/video0 is busy
(although it works while xawtv is being used instead of
tv
Hi,
I got the card working!! All this time I had the solution in my
hands and I did not use it properly.
First, the chips that my card has:
Conexant Fusion 878A, TEA5767 (FM Tuner)
I followed the same procedure as mentioned in
Thanks Daniel and Bruno for replying. I was beginning
to think that no one was going to reply.
On 6/28/06, Daniel wrote:
> Now the problem is that tvtime only shows me the last channel I viewed
> under WindowsXP. Other than that no other frequency is detected.
If you can see the picture, the
Linux,
I can get back some valuable disk space.
(By the way, the FM radio part is also not working under Linux, but
I am not bothered about that.)
Regards,
Santanu Chatterjee
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Jaque Moreau <[EMAIL PROTECTED]> writes:
> >> it didn't work.
> >>
> > try
> >:set term=$TERM
>
> in vim? What does it do?
I read this thread from the middle and missed the rest. So, if I
understood your question correctly, you got colors in terminal, but not
while in vim. If that is true, you
Jaque Moreau <[EMAIL PROTECTED]> writes:
> Johann Koenig schrieb im Artikel <[EMAIL PROTECTED]>:
> > Jaque Moreau <[EMAIL PROTECTED]> wrote:
> >
> >> there is no syntax highlighting on console, only under xterm.
> >> syntax on is enabled in global vimrc.
>
> it didn't work.
>
try
:set term=$TE
Jaque Moreau <[EMAIL PROTECTED]> writes:
> Johann Koenig schrieb im Artikel <[EMAIL PROTECTED]>:
> > --=.5UPOgFdrEYOzCL
> > Content-Type: text/plain; charset=US-ASCII
> > Content-Transfer-Encoding: 7bit
> >
> > On Sat, 02 Aug 2003 22:20:06 +0200
> > Jaque Moreau <[EMAIL PROTECTED]> wrote:
> >
>
On Sun, 06 Apr 2003 13:10:06 +0200, Colin Watson wrote:
>> On Sun, Apr 06, 2003 at 11:27:23AM +0500, Santanu Chatterjee wrote:
>> By the way, I am not using the mailing list for posting.
>> I am using this as a newsgroup (linux.debian.user). So,
>> I felt that my news post
On Fri, 04 Apr 2003 19:30:28 +0200, Paul Johnson wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Fri, Apr 04, 2003 at 05:03:58PM +0200, Willem-Jan Meijer wrote:
>> Why all that testing?
>
> People are stupid and don't realise that email isn't instant?
Sorry friends,
After I subs
Hello
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Friends,
What is happening?
About a few months ago, the posts
went through perfectly.
What happened?
I have subscribed to the authorization mailing
list just to get my posts through.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECT
Hello,
this is a test.
please ignore
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
sequence.
Somebody mentioned 'xmodmap' etc. They may be helpful too.
Never used them.
HTH
--
Regards,
Santanu Chatterjee
[EMAIL PROTECTED]
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
37 matches
Mail list logo
