root@debian:/home/frantal# cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64
root=UUID=34ae470f-b795-4ac5-af94-6419651c910b ro quiet splash
Hi, this morning I had to give 3 times the command before etehernet begun to
work.
Here the commands I read need to hel me:
root@debian:/home/frantal# networkctl
WARNING: systemd-networkd is not running, output will be incomplete.
IDX LINK TYPE OPERATIONAL SETUP
1 lo loopback - unmanaged
2
Here part of the command "dmesg" I tried to scroll back, then select all and
copy, but I didn't see all the answer of the command. I don't know how to do it!
Meanwhile I cancelled what I wrote on /etc/default/grub and now it is as it was
originally.
Reboot also didn't help.
Thanks again for
I remove auto eth0
After rebooting the problem remains.
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
>
> -- Messaggio originale --
> Da: Marco Moock
> A: debian-user@lists.debian.org
> Data: 14/03/2024 09:38 CET
> Oggetto:
root@debian:/home/frantal# dmesg |grep r8169
root@debian:/home/frantal# sudo dmesg |grep r8169
root@debian:/home/frantal# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source
kManager[565]: [1710403345.8732] device
(enp19s0): Activation: successful, device activated.
mar 14 09:02:25 debian NetworkManager[565]: [1710403345.8750] manager:
NetworkManager state is now CONNECTED_GLOBAL
root@debian:/home/frantal#
> Il 13/03/2024 21:06 CET Marco Moock ha scrit
Hello,
I did
I tried to modify as suggested.I couldn't use sudo update-grub
So I gave this command:
I think there is an error in the procedure
Waiting for suggestions...
Francesco
> Il 13/03/2024 18:10 CET Franco Martelli ha scritto:
>
>
> On 13/03/24 at 17:51, fran...@libero.it wrote:
'managed')
mar 11 16:48:25 debian NetworkManager[626]: [1710172105.9482] manager:
NetworkManager state is now CONNECTING
mar 11 16:48:25 debian NetworkManager[626]: [1710172105.9850] device
(wlp18s0b1): set-hw-addr: reset MAC address to C4:17:FE:D7:54:E2 (preserve)
mar 11 16:48:26 debian
ian ifup[536]: ifup: unknown interface eth0
mar 13 11:54:42 debian systemd[1]: networking.service: Main process exited, cod>
mar 13 11:54:42 debian systemd[1]: networking.service: Failed with result 'exit>
mar 13 11:54:42 debian systemd[1]: Failed to start networking.service - Raise n>
root
Here the "long" output of the 2 requested commands:
[0.306974] pci :14:00.0: proprietary Ricoh MMC controller disabled (via
FireWire function)
[0.306975] pci :14:00.0: MMC cards are now supported by standard SDHCI
controller
[0.306977] pci :14:00.0: [1180:e822] type 00
Hello,
thanks for your answers.
I used the cable with other notebooks and it worked.
In any case I used another cable to test it, but I had the same reactions, no
connection!
Today I had to give the command 3 times before having a connection...
So I give a try to ask to ChatGPT what does it
Hello,
I have a Dell notebook Vostro 3700 that doesn't work on ethernet connection
Here I give some feature of system and hardware:
root@debian:/home/frantal# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 12 (bookworm)
Release: 12
Codename
I have installed Windows 10 on a notebook Asus F552M. Then I installed Debian
12, but no Grub at reboot only Windows. If I use SuperGrub cd by manual booting
I can access to debian and boot it. So I used Boort Repair Disk 64 to try to
repair, but it gave me a report advicing me to ask online
Hello, I succeeded in solving the problem by running testdisk on Debian then
recuperate Mac partition and when I rebooted only Mac system run.
Then I reinstalled REFind and the problem was solved.
Now I have the 2 systems again!
Regards
Francesco
ntered, and output displayed:
>
> # cat /etc/debian_version ; uname -a
> 11.2
Linux debian 5.10.0-10-amd64 #1 SMP Debian 5.10.84-1 (2021-12-08) x86_64
GNU/Linux
> # lsblk
> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:00 447,1G 0 disk
├─sda3 8:30 27,9G 0
Hi. I inadvertently deleted the Mac and EFI partitions of an HD inserted on a
Macbook Pro (2009). Fortunately I have the Linux one (with Debian XFCE) that I
am writing from. I tried to recover with Gparted (by installing gpart), but
after more than an hour I stopped having no recovery signal.
Hello I received from nore...@google.com mailto:nore...@google.com the
following email in Czech (that I translated in english):
"And the value-added tax issuance ①③O③⑦②⑨③O①⑥The emblem is synchronized and
regular and can be checked. And the invoice emblem is synchronized and regular
and can be
Hello,
unfortunately, nothing David suggested worked, so I finally set it on in the
bios Legacy (via F12) and then reinstalled Debian.
Now if I turn on, Grub appears with Debian that starts (even if it takes a
while to boot) and if I want to use Windows, at boot, I have to click F12 and
Hi,
I was unable to install Grub. Via ‘rescue mode’ of installation cd, it doesn't
make me do it; takes me to the partitioning window. Then I did a reboot which
gave me a screenshot
error: file ‘/boot/grub/i386-pc/normal.mod’ not found.
On:
grub rescue>ls
(hd0) (hd0,gpt8) (hd0,gpt7)
Hello,
yes HD is 1TB and Debian partition is 300GB (not Mb).
Currently Windows starts directly without reporting other OSes present.
So should I use the installation disk in "rescue mode" and reinstall Grub to
Debian's / partition (27.94 GiB dev/sda6)?
How to install os-prober?
I think I
I have installed Debian 11 on a Dell T1650 Desktop PC (i7 & 24 GB RAM).
I resized the 1GB HD leaving 300MB on which I installed Debian.
At the request of the installation of Grub I indicated the HD.
Now looking at it with Gparted the HD is divided as follows:
dev / sda1 EFI system partition
Ok, since this is how it works I keep it that way.
I thank everyone for the tips and advice.
Francesco
Hello,
thanks for the help and suggestions:
I don't need to press alt (option) to view the operating systems because I have
rEFInd installed.
However, 2 Debian icons appear, one OS X, and one Windows.
If I click on the latter, a white writing on a black background appears with:
MBR 12: and a
Hello,
I installed Debian 11 (386) on a 2009 Macbook Pro 13 "(5.5).
The installation did not give me any problems except it did not detect wifi
card and touchpad, but I was connected with ethernet and used an external
mouse, so the whole process ended.
During the installation phase of Grub I
About the questions sent:
Fujitsu Esprimo P2560 MI4W-D2041
Intel® Pentium® processor E5700 (2 Cores / 2 Threads, 3.0 GHz, 2 MB, 800 MHz)
RAM 2+4 GB.
Video card included in the motherboard
internal HD 300 GB
I think there would be added a second HD of 80 GB or maybe another of 300 GB
because
Taking a cue from the Thread "About user and password on Debian 10" I would
like to transfer the partitions related to Debian 10 to a larger HD, but with
the possibility of having the / partition larger than the current one. It's
possible?
I was thinking of using Filezilla, but I don't know if
I wanted to let everyone know that I was able to fix the problem even though I
will have to open another thread to fix the cause of the problem. The cause of
not being able to enter the Debian user desktop was that the / partition was
too full! I had installed Debian with 2 partitions (/ +
Try (as root, at CLI) "passwd "
I did. It permits to fill only the old password and then it says your password
is changed. But when I reboot I have the same as I told
I tried (on terminal of root desktop to write:
pupmar@debian:~$ cat /etc/passwd
root:x:0:0:root:/root:/bin/bash
I have installed Debian 10 (XFCE) on an old computer and now after a year of
use although I put right user and password it reappear the window that asks
user and password. I entered as root and it goes on with a desktop where I can
work. There, on Terminal, I tried to change password of user
Hello,
A friend has installed Debian Buster with XFCE on his pc and each time the menu
bar at the bottom center and top disappears. Is there a way to ensure that it
never disappears?
Since every time I have to go to his house to restart XFCE.
Thanks for help
Francesco
I installed a Debian 10 (32 bit) on an old PC desktop and I saw that the
terminals (UX) doesn't have any menu above.
How can I obtain a terminal window with menu above so that for example I can
copy or paste commands etc.?
Many thanks for the help and regards
frantal
31 matches
Mail list logo
