On Sat, 14 Nov 1998, Paul McDermott wrote:
Hello everyone, I just got kernel 2.1.128 up and running. I am loading
sound as a module. When I try to cat something to the device I get this
error message:
[paul:~/multimedia/next-gen]$ cat youronbd.au /dev/audio
bash: /dev/audio: Operation
On Sun, 15 Nov 1998, Chris Mayes wrote:
possible, stuck it back on, and *wham* Nothng changed. So, I've decided
it's time to get a good(low-priced) laser printer. So, who has
recommendations? I'd like to stay below 400, around 300 if possible. It
should work well under Linux (obviously)
On Wed, 4 Nov 1998, Lance Hoffmeyer wrote:
In my attempt to isolate why I can't print I came across a potential
problem. When I installed Linux I had a parallel
port Zip Drive attached to my printer port. If I type 'mount /dev/sda
Zip' I am able to mount the zip drive. Since
my printer
On Sun, 1 Nov 1998, Debian-User wrote:
I am pretty sure I installed iomega parellel support to my kernel when i
built the last one
And why my system boots i see some iomega stuff fly by but when this is what
happens when i try to
use it.:
mount -t vfat /dev/sda4 /zip
mount: the kernel
On Sat, 31 Oct 1998, Eric wrote:
I recently pointed dselect to slink in order to upgrade. I picked through
all the packages and everything and got it all to install properly, but
when I was done, X would not work properly.
I tried upgrading too, and I also found that the configs were gone.
I
On Tue, 27 Oct 1998, Dave Swegen wrote:
Is there anyone out there who could enlighten me on the topic of colours
in lynx? IMHO the default colours are dreadful (dark-blue on black,
anyone?). I have rtfm, but to little avail. This is something that has
been bugging me for ages, and I would
On Wed, 7 Oct 1998, M.C. Vernon wrote:
I have an HP Deskjet 670c printer - what line do I need to give
magicfilterconfig (the man pages don't seem to have such helpful
information)?
You'll need to get ghostscript from the slink distribution. This has
support for the 'generic' hpdj
Set NNTPSERVER=localhost in your environment. It took me
months to figure this out. I do NOT find this documented
anywhere.
I have my default server set up to localhost, so this wasn't
necessary for me. However, I was emailed a message that told
me how to fix the problem. Since
On Thu, 1 Oct 1998 [EMAIL PROTECTED] wrote:
Set NNTPSERVER=localhost in your environment. It took me
months to figure this out. I do NOT find this documented
anywhere.
I have my default server set up to localhost, so this wasn't
necessary for me. However, I was emailed a message that told
I'm using suck and inn to run a local news spool.
Trn works fine, but I'd prefer nn. However when
I try nn on my local spool it spits out
could not fetch active file
and quits. Nn works using my isp's news server,
and trn works fine. Does nn not work with the
default setup for inn? Can I
I've installed rvplayer but it only works as root.
When I run it as normal user it gives error 72, expired
version. The user is in the audio group. I've installed it
from the slink version. Is there anything else I need to do?
Mark
On Sun, 27 Sep 1998, Paul McDermott wrote:
Hello everyone, thanks to everyone who helped with my ppp questions. I
have a couple of questions about the hp deskjet 890c. First does
magicfiler have a filter for this particular printer (or anyother filter)
Can I get the printer command language
On Mon, 14 Sep 1998, Eric Jensen wrote:
Well, I reinstalled the debs, and it didn't help..same problems. Anyone
else got ideas?
I had problems using wu-ftp. I switched to pro-ftp.
Mark
On Fri, 11 Sep 1998, Lennox Reid wrote:
Where do I get a driver to access a parrallel port ZIP drive on a Linux
machine?
Compile a kernel.
Include modules for scsi support, parallel port, and ppa.
Check out the Parallel Port Home Page at
http://www/torque.net/parport/
Mark
On Sat, 5 Sep 1998, DMDP wrote:
If there anyway to have a normal user access PON?
Yes, but its been long enough that I don't remember all the the changes
that I made. I do remember that I added the 'normal user' to the dip and
dialout groups. After makingthese changes, check the
I needed to change an option compiled into speak-freely.deb,
Script started on Tue Aug 11 21:28:49 1998
Here's the trimmed output of what I tried, and the resulting
error message I got.
--
[EMAIL PROTECTED]:/tmp# dpkg-source -x
On Tue, 11 Aug 1998, Joey Hess wrote:
mwb wrote:
speakfree.h:64: gsm.h: No such file or directory
You need libgsm1-dev.
Thanks
Is there a way to tell which packages are required to compile
a source package, that aren't needed to run the compiled
source?
Mark
On Mon, 3 Aug 1998, George Bonser wrote:
Well, it is obvious that some people here are just being hard headed. I
really do not think there are that many dummies here. Look at it like
this. A person wants Linux and decides to spend about 30 minutes to choose
which one they are going to buy.
On Mon, 13 Jul 1998, Jim Nicholson wrote:
I just upgraded to hamm, and with that I moved from a hand-patched
2.0.30 kernel to kernel-source-2.0.34. I made a kernel package and
installed it, only to discover that the ISO 9660 file system was not
built, because I didn't compile in NLS
On Thu, 14 May 1998, Florian Attenberger wrote:
Hi,
I copied one pure data-cd. This worked fine.
Then I tried Audio Tracks. In this case the files of the correct size are
created _without_ the CD-Drive running.
I tried my second CD-Drive - same shit.
My System:
Kernel 2.1.101
On Sun, 10 May 1998, XRD Lab wrote:
mwb wrote:
I have a Mermorex CRW-1622.
Sorry for the stupid question. Is the above drive IDE?
YES, it is IDE.
I use kernel 2.1.94 for writing. As far as it goes, you need to
compile the kernel to use scsi emulation, generic scsi support
On Sun, 10 May 1998, Randy Edwards wrote:
Why do you need a separate partition to boot from?
I have an 800mb root partition (which is more than 1024 cylinders,
obviously) and it boots from that just fine, and that's on /dev/hdb
too.
This is what I thought too! As I said, I
On Sat, 9 May 1998, XRD Lab wrote:
Machine: Pentium 166MHz MMX, 32MB RAM, swap 40MB
OS : Debian linux, kernel 2.0.29
CD-Writer:HP 7100 (internal model), (IDE interface, not scsi)
cdwrite -v -s 2 -D /dev/hdd cdimg
I have a Mermorex CRW-1622. Its not supported by
On Sun, 15 Mar 1998, Alex Maneu Victoria wrote:
--IMPORTANT!! PLEASE REPLY TO [EMAIL PROTECTED] , thanks
Hi.
There's a friend of mine that has recently bought a Cd-rewriter (HP
CD-writer plus). How can he configure his fstab to make it work?
Same as any other cd. Can you be more
On Sun, 15 Mar 1998, Tristan Day that's you! wrote:
OK, I'm finding all this Linux thing really difficult because I'm using it
on my home computer and have to go to my mother's college to download
things, and I'm a total newbie no! I hate that word. I'm a Brit! so I
don't have a clue when it
On Fri, 27 Feb 1998, Marcus Brinkmann wrote:
On Fri, Feb 27, 1998 at 07:12:51AM -0600, Richard E. Hawkins Esq. wrote:
I've had to install the bo smail, and leave it htere the last few months.
Really, smail 3.2.0.100 is broken at the moment. There a couple of things
you can try, please
On Mon, 16 Feb 1998, Bob Bernstein wrote:
What's the trick to getting into a file all the contents of a console session,
i.e. commands, and the output of commands, into a log file for that session?
script filename
Mark
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the
I normally run X under vt7, however I have had a couple
instanced where when I exited X, by ctl-alt-backspace,
it restarts in the next console. It doesn't always
seem to do this. The message on the old screen after
X exit is:
received SIGPIPE signal: exiting...
I am running hamm.
Any ideas on
On Fri, 30 Jan 1998 [EMAIL PROTECTED] wrote:
Several kind folks responded to my plea for help in solving the printing
staircase effect when using lpr to print to an HP DeskJet used for Windows.
OK, I have installed magicfilter-so how do I use it. I entered it as a command
and the system
On Sun, 25 Jan 1998, Daniel Martin at cush wrote:
Jeff Gutliph [EMAIL PROTECTED] writes:
Hi,
I've been trying to get PPP to work by following the PPP How-To. I
called my ISP and got the required info. When I asked about PAP they
didn't seem to know what I was talking about. So, I
30 matches
Mail list logo
