Re: Installing Problems with 3com PCI Bus Master 3C590 Combo Network Card

1998-01-27 Thread uctpjac
Thank you Martin Donald. This problem was linked to the Netwrok and SCSI cards sharing the same IRQ. This was on a Gateway G6-200 The solution to this problem is to juggle the PCI cards until it works! Tony -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL

Re: Installing Problems with 3com PCI Bus Master 3C590 Combo Network Card

1998-01-26 Thread Tony Curzon Price
Dear Martin, Thank you for your help. First of all: I may be wrong, but aren't the vortex and the boomerang cards supported only by kernel = 2.0.32 ? My old Slackware distribution was of Kernel 2.0.12, and had support for the card. The errors reported are: SIOCSIFFLAGS: Try again

Re: Installing Problems with 3com PCI Bus Master 3C590 Combo Network Card

1998-01-26 Thread Martin Bialasinski
Tony Curzon Price [EMAIL PROTECTED] writes: The errors reported are: SIOCSIFFLAGS: Try again SIOCADDRT:network is unreachable SIOCADDRT:network is unreachable When do this errors occur? I get this error at boot-up, but also as a result of: /sbin/route add -net my IP netmask

Installing Problems with 3com PCI Bus Master 3C590 Combo Network Card

1998-01-25 Thread Tony Curzon Price
Dear Users, In deciding to upgrade my Linux, I decided to change distribution re-install the whole thing. It's gone smoothly apart from the fact that the network is not recognised. This is, unfortunately, on the critical path to full installation! The errors reported are: SIOCSIFFLAGS: Try

Re: Installing Problems with 3com PCI Bus Master 3C590 Combo Network Card

1998-01-25 Thread Martin Bialasinski
Tony Curzon Price [EMAIL PROTECTED] writes: First of all: I may be wrong, but aren't the vortex and the boomerang cards supported only by kernel = 2.0.32 ? The errors reported are: SIOCSIFFLAGS: Try again SIOCADDRT:network is unreachable SIOCADDRT:network is unreachable When do this errors