[Desktop-packages] [Bug 1717992] Re: Sound silently plays to "Dummy Output"
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: pulseaudio (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1717992 Title: Sound silently plays to "Dummy Output" Status in linux package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Since upgrade to 4.10.0-35-generic in Ubuntu 17.04, the sound card is detected, but pavucontrol has only "Dummy Output". Bar animation shows audio is playing, but no sound is heard. alsamixer is working fine, but audio still can't be heard. Configuration tab says "No cards available for configuration". $ lspci -v 0:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21) Subsystem: Dell Device 0781 Flags: bus master, fast devsel, latency 32, IRQ 283 Memory at d5328000 (64-bit, non-prefetchable) [size=16K] Memory at d530 (64-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel, snd_soc_skl # aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server sysdefault:CARD=PCH HDA Intel PCH, ALC3246 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog Front speakers surround21:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output hdmi:CARD=PCH,DEV=1 HDA Intel PCH, HDMI 1 HDMI Audio Output hdmi:CARD=PCH,DEV=2 HDA Intel PCH, HDMI 2 HDMI Audio Output dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog Direct sample mixing device dmix:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample mixing device dmix:CARD=PCH,DEV=7 HDA Intel PCH, HDMI 1 Direct sample mixing device dmix:CARD=PCH,DEV=8 HDA Intel PCH, HDMI 2 Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample snooping device dsnoop:CARD=PCH,DEV=7 HDA Intel PCH, HDMI 1 Direct sample snooping device dsnoop:CARD=PCH,DEV=8 HDA Intel PCH, HDMI 2 Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct hardware device without any conversions hw:CARD=PCH,DEV=7 HDA Intel PCH, HDMI 1 Direct hardware device without any conversions hw:CARD=PCH,DEV=8 HDA Intel PCH, HDMI 2 Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Hardware device with all software conversions plughw:CARD=PCH,DEV=7 HDA Intel PCH, HDMI 1 Hardware device with all software conversions plughw:CARD=PCH,DEV=8 HDA Intel PCH, HDMI 2 Hardware device with all software conversions --- ApportVersion: 2.20.4-0ubuntu4.5 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/dsp', '/dev/snd/by-path', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D8p', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/controlC0', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDesktop: XFCE DistroRelease: Ubuntu 17.04 HibernationDevice: RESUME=UUID=0bcd17dc-d971-4048-8c1f-d2bb48e8a157 InstallationDate: Installed on 2017-08-18 (31 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) MachineType: Dell Inc. Inspiron 7460 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.10.0-35-generic.efi.signed root=/dev/mapper/ubu-root r
[Desktop-packages] [Bug 1717992] Re: Sound silently plays to "Dummy Output"
my workaround is running `pulseaudio -k` and restarting Spotify. Chrome doesn't need a restart to play. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1717992 Title: Sound silently plays to "Dummy Output" Status in linux package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: Since upgrade to 4.10.0-35-generic in Ubuntu 17.04, the sound card is detected, but pavucontrol has only "Dummy Output". Bar animation shows audio is playing, but no sound is heard. alsamixer is working fine, but audio still can't be heard. Configuration tab says "No cards available for configuration". $ lspci -v 0:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21) Subsystem: Dell Device 0781 Flags: bus master, fast devsel, latency 32, IRQ 283 Memory at d5328000 (64-bit, non-prefetchable) [size=16K] Memory at d530 (64-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel, snd_soc_skl # aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server sysdefault:CARD=PCH HDA Intel PCH, ALC3246 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog Front speakers surround21:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output hdmi:CARD=PCH,DEV=1 HDA Intel PCH, HDMI 1 HDMI Audio Output hdmi:CARD=PCH,DEV=2 HDA Intel PCH, HDMI 2 HDMI Audio Output dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog Direct sample mixing device dmix:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample mixing device dmix:CARD=PCH,DEV=7 HDA Intel PCH, HDMI 1 Direct sample mixing device dmix:CARD=PCH,DEV=8 HDA Intel PCH, HDMI 2 Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample snooping device dsnoop:CARD=PCH,DEV=7 HDA Intel PCH, HDMI 1 Direct sample snooping device dsnoop:CARD=PCH,DEV=8 HDA Intel PCH, HDMI 2 Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct hardware device without any conversions hw:CARD=PCH,DEV=7 HDA Intel PCH, HDMI 1 Direct hardware device without any conversions hw:CARD=PCH,DEV=8 HDA Intel PCH, HDMI 2 Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC3246 Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Hardware device with all software conversions plughw:CARD=PCH,DEV=7 HDA Intel PCH, HDMI 1 Hardware device with all software conversions plughw:CARD=PCH,DEV=8 HDA Intel PCH, HDMI 2 Hardware device with all software conversions --- ApportVersion: 2.20.4-0ubuntu4.5 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/dsp', '/dev/snd/by-path', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D8p', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/controlC0', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDesktop: XFCE DistroRelease: Ubuntu 17.04 HibernationDevice: RESUME=UUID=0bcd17dc-d971-4048-8c1f-d2bb48e8a157 InstallationDate: Installed on 2017-08-18 (31 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) MachineType: Dell Inc. Inspiron 7460 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.10.0-35-generic.efi.signed root=/dev/mapper/ubu-root ro quiet splash zswap.enabled=1 vt
[Desktop-packages] [Bug 1706889] Re: package chromium-browser 59.0.3071.109-0ubuntu0.17.04.1360 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before
[Expired for chromium-browser (Ubuntu) because there has been no activity for 60 days.] ** Changed in: chromium-browser (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1706889 Title: package chromium-browser 59.0.3071.109-0ubuntu0.17.04.1360 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting a removal Status in chromium-browser package in Ubuntu: Expired Bug description: Nothing really. Just get popups that the chromium browser is closing when I start it, so I reported this. Using the 17.04 and fully updated as on Thursday 27th July 2017. Thanks. Great OS, great tools. Will never use Windows anymore. ProblemType: Package DistroRelease: Ubuntu 17.04 Package: chromium-browser 59.0.3071.109-0ubuntu0.17.04.1360 ProcVersionSignature: Ubuntu 4.10.0-28.32-generic 4.10.17 Uname: Linux 4.10.0-28-generic x86_64 ApportVersion: 2.20.4-0ubuntu4.5 AptOrdering: chromium-browser:amd64: Remove NULL: ConfigurePending Architecture: amd64 DRM.card0-DP-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-HDMI-A-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-LVDS-1: enabled: enabled dpms: On status: connected edid-base64: AP///wAOFMcUAA8VAQOAIhN4Ck5NnldUkSYPUFQBAQEBAQEBAQEBAQEBAQEBeB1WwlAAJjA7JzYAWMIQAAAYeB1WwlAAJjA7JzYAWMIQAAAY/gBDUFQKICAgICAgICAgAABDTEFBMTU2V0IxMUEgANo= modes: 1366x768 DRM.card0-VGA-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: Date: Wed Jul 26 16:07:08 2017 Desktop-Session: 'None' 'None' 'None' DpkgTerminalLog: dpkg: error processing package chromium-browser (--remove): package is in a very bad inconsistent state; you should reinstall it before attempting a removal Env: 'None' 'None' ErrorMessage: package is in a very bad inconsistent state; you should reinstall it before attempting a removal InstallationDate: Installed on 2017-07-25 (1 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) InstalledPlugins: Load-Avg-1min: 4.96 Load-Processes-Running-Percent: 0.4% Lsusb: Bus 002 Device 003: ID 090c:37b0 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Hewlett-Packard HP G62 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic root=UUID=f03b9429-c787-4532-a66b-a145f1b1e393 ro quiet splash vt.handoff=7 SourcePackage: chromium-browser Title: package chromium-browser 59.0.3071.109-0ubuntu0.17.04.1360 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting a removal UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/10/2010 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.07 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1425 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.13 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.07:bd02/10/2010:svnHewlett-Packard:pnHPG62NotebookPC:pvr049D102027102:rvnHewlett-Packard:rn1425:rvr54.13:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP G62 Notebook PC dmi.product.version: 049D102027102 dmi.sys.vendor: Hewlett-Packard modified.conffile..etc.default.chromium-browser: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1706889/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1722044] Re: package chromium-browser 61.0.3163.100-0ubuntu0.16.04.1306 failed to install/upgrade: nelze zkopírovat rozbalená data „./usr/lib/chromium-browser/icudtl.dat“ do „/
[Expired for chromium-browser (Ubuntu) because there has been no activity for 60 days.] ** Changed in: chromium-browser (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1722044 Title: package chromium-browser 61.0.3163.100-0ubuntu0.16.04.1306 failed to install/upgrade: nelze zkopírovat rozbalená data „./usr/lib/chromium- browser/icudtl.dat“ do „/usr/lib/chromium-browser/icudtl.dat.dpkg- new“: neočekávaný konec souboru nebo proudu Status in chromium-browser package in Ubuntu: Expired Bug description: It happened when I was trying to install chromium with sudo aptitude install chromium-browser-i10n chromium-browser ProblemType: Package DistroRelease: Ubuntu 16.04 Package: chromium-browser 61.0.3163.100-0ubuntu0.16.04.1306 ProcVersionSignature: Ubuntu 4.10.0-28.32~16.04.2-generic 4.10.17 Uname: Linux 4.10.0-28-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.10 AptOrdering: chromium-browser: Install chromium-browser-l10n: Install chromium-browser: Configure chromium-browser-l10n: Configure NULL: ConfigurePending Architecture: amd64 DRM.card0-DVI-D-1: enabled: enabled dpms: On status: connected edid-base64: AP///wAebWtW1rQAAAcRAQPqMSB46q7FoldKnCUSUFSna4CVAIGAgUBxTwEBAQEBAQEBfC6QoGAaHkAwIDYA2igRAAAaITmQMGIaJ0BosDYA2igRAAAc/QA4SxxTDwAKICAgICAg/ABMMjI2VyAKICAgICAgAM8= modes: 1680x1050 1680x1050 1280x1024 1280x1024 1440x900 1280x960 1152x864 1024x768 1024x768 832x624 800x600 800x600 800x600 640x480 640x480 720x400 DRM.card0-TV-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-VGA-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: Date: Sun Oct 8 10:48:11 2017 Desktop-Session: 'None' 'None' 'None' Env: 'None' 'None' ErrorMessage: nelze zkopírovat rozbalená data „./usr/lib/chromium-browser/icudtl.dat“ do „/usr/lib/chromium-browser/icudtl.dat.dpkg-new“: neočekávaný konec souboru nebo proudu InstallationDate: Installed on 2017-10-08 (0 days ago) InstallationMedia: Lubuntu 16.04.3 LTS "Xenial Xerus" - Release amd64 (20170801) Load-Avg-1min: 1.22 Load-Processes-Running-Percent: 0.5% Lsusb: Bus 001 Device 003: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: System manufacturer System Product Name ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic root=UUID=eb9444ff-a658-42eb-ad86-fe6743d699fa ro quiet splash vt.handoff=7 SourcePackage: chromium-browser Title: package chromium-browser 61.0.3163.100-0ubuntu0.16.04.1306 failed to install/upgrade: nelze zkopírovat rozbalená data „./usr/lib/chromium-browser/icudtl.dat“ do „/usr/lib/chromium-browser/icudtl.dat.dpkg-new“: neočekávaný konec souboru nebo proudu UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/02/2006 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: ASUS M2N8L ACPI BIOS Revision 0301 dmi.board.name: M2N8L dmi.board.vendor: ASUSTek Computer INC. dmi.board.version: 1.xx dmi.chassis.asset.tag: 123456789000 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvrASUSM2N8LACPIBIOSRevision0301:bd11/02/2006:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTekComputerINC.:rnM2N8L:rvr1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer modified.conffile..etc.default.chromium-browser: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1722044/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1728778] Re: Touchpad not working after resuming from suspend
[Expired for gnome-shell (Ubuntu) because there has been no activity for 60 days.] ** Changed in: gnome-shell (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1728778 Title: Touchpad not working after resuming from suspend Status in gdm3 package in Ubuntu: Expired Status in gnome-shell package in Ubuntu: Expired Bug description: I am using ubuntu 17.10 (intel i3, 16gb ram ). my mouse doesn't works once I have suspended the pc when i close the lid and reopens it To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1728778/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1730091] Re: session freezes/hangs after undetermined amount of time
[Expired for gnome-shell (Ubuntu) because there has been no activity for 60 days.] ** Changed in: gnome-shell (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1730091 Title: session freezes/hangs after undetermined amount of time Status in gnome-shell package in Ubuntu: Expired Bug description: Currently using the default wayland session on 17.10: the computer eventually hangs/freezes after an undetermined amount of time, whether it'S still powered on and unused or when put on standby. Resuming the session is impossible as the device is frozen and needs to bee reset with power button. Critical bug as the issues has provoked major data loss and work in progress loss. Possibly a functional regression due to the use of wayland or the newer kernel provided with this release. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: gnome-shell 3.26.1-0ubuntu5 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sat Nov 4 12:29:03 2017 DisplayManager: gdm3 InstallationDate: Installed on 2017-10-20 (15 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1730091/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1728810] Re: CUPS ERRORS
[Expired for cups (Ubuntu) because there has been no activity for 60 days.] ** Changed in: cups (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1728810 Title: CUPS ERRORS Status in cups package in Ubuntu: Expired Bug description: There are problems in my PC about the "Server".-When I am traying to use my printer (wireless printer).-An advice apairs as: "failed to connect to server". I would have your help,thank You in advance.Sincerely Fernando Espinosa. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-97.120-generic 4.4.87 Uname: Linux 4.4.0-97-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 BootLog: [[0;32m OK [0m] Started Network Manager. Starting Network Manager Wait Online... [[0;32m OK [0m] Reached target Network. [[0;32m OK [0m] Started Unattended Upgrades Shutdown. CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Tue Oct 31 00:32:15 2017 DistUpgraded: Fresh install DistroCodename: xenial DistroVariant: ubuntu GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 7310] [1002:9809] (prog-if 00 [VGA controller]) Subsystem: Lenovo Wrestler [Radeon HD 7310] [17aa:365d] InstallationDate: Installed on 2016-11-27 (337 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) MachineType: LENOVO 10103 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-97-generic root=UUID=e9b7906b-8c2c-4887-89be-701551b926e7 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/05/2013 dmi.bios.vendor: LENOVO dmi.bios.version: EKKT30BUS dmi.board.name: Remore CRB dmi.board.vendor: LENOVO dmi.board.version: Win8 STD EM DPK IPG dmi.chassis.type: 13 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnLENOVO:bvrEKKT30BUS:bd03/05/2013:svnLENOVO:pn10103:pvrLenovoC345:rvnLENOVO:rnRemoreCRB:rvrWin8STDEMDPKIPG:cvnToBeFilledByO.E.M.:ct13:cvrToBeFilledByO.E.M.: dmi.product.name: 10103 dmi.product.version: Lenovo C345 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.76-1~ubuntu16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.0.7-0ubuntu0.16.04.2 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 17.0.7-0ubuntu0.16.04.2 version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.7 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 xserver.bootTime: Mon Oct 30 16:40:55 2017 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.18.4-0ubuntu0.7 xserver.video_driver: radeon To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1728810/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1729441] Re: changing display mode after login terminates session
[Expired for gnome-shell (Ubuntu) because there has been no activity for 60 days.] ** Changed in: gnome-shell (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1729441 Title: changing display mode after login terminates session Status in gnome-shell package in Ubuntu: Expired Bug description: When I login, I type the password on the laptop screen. (Maybe it's important.) After a while, while I'm waiting to get logged in, Ubuntu changes the display mode. Both monitor goes black, laptop screen becomes the secondary and my external monitor becomes the primary display. Because of Ubuntu is unable to remember to the previously set display mode, I usually change it a bit after I have logged in. However, if I (would like to) do this too quickly, say... less than 4-5 seconds after I can see my desktop, my session gets terminated and I'm returned to the login screen. You can repeat it indefinitely, it always worked for me. I thought it's because of one of my extensions but I could reproduce it after I have disabled them. I haven't found any useful log entries. UPDATE 1: While I was writing this, I thought it has something to do with theme loading or something like this, so I continued to test with startup applications. I just rarely managed to reproduce this bug when I didn't execute the following script (as a file) at login: ``` #!/bin/bash sleep 1s; firefox & sleep 1s; thunderbird & ``` I also noticed that after I have some faulty logins and then I login without changing display mode, I >sometimes< have no desktop, no startup applications and when I click power off/logout buttons nothing happens, but that's sure I will being logged out randomly in the near future - even if I don't touch my computer (I'm talking about minutes). Plus, I can see the desktop and the top bar (so it's the primary screen) with two wide black bars on the two sides of my laptop monitor for a moment before I get logged out. (However, I don't see any resolution changes so I guess it's not 640x480, or 800x600, etc.) ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: gnome-shell 3.26.1-0ubuntu5 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 NonfreeKernelModules: vtsspp sep4_1 socperf2_0 pax ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CurrentDesktop: GNOME Date: Wed Nov 1 21:00:45 2017 DisplayManager: gdm3 InstallationDate: Installed on 2017-08-08 (85 days ago) InstallationMedia: Ubuntu-GNOME 17.04 "Zesty Zapus" - Release amd64 (20170412) SourcePackage: gnome-shell UpgradeStatus: Upgraded to artful on 2017-10-21 (10 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1729441/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1729028] Re: gnome-shell crashes when monitor sleeps or is turned off
[Expired for gnome-shell (Ubuntu) because there has been no activity for 60 days.] ** Changed in: gnome-shell (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1729028 Title: gnome-shell crashes when monitor sleeps or is turned off Status in gnome-shell package in Ubuntu: Expired Bug description: Gnome shell crashes reliably and only after a period of inactivity (15+ minutes). I have not seen it crash while using the desktop - even for hours at a time. I suspect it has something to do with locking the screen or turning off the monitor. However even after attempting to disable both lockscreen and blank screen it still happens. After a crash dmesg shows [ 3726.608957] gnome-shell[2666]: segfault at 38 ip 7fc6a7330c30 sp 7fff0d12fe78 error 4 in libmutter-1.so.0.0.0[7fc6a72de000+141000] When the crash happens it goes back to the login screen. Logging in works fine. It happens pretty reliably but will sometimes successfully lock and blank the screen. I would say it happens 90% of the time I leave the computer alone for awhile. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: gnome-shell 3.26.1-0ubuntu5 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Tue Oct 31 11:34:11 2017 DisplayManager: gdm3 GsettingsChanges: b'org.gnome.shell' b'favorite-apps' b"['org.gnome.Nautilus.desktop', 'google-chrome.desktop', 'firefox.desktop', 'code.desktop', 'org.gnome.Terminal.desktop', 'libreoffice-writer.desktop', 'libreoffice-calc.desktop', 'libreoffice-impress.desktop', 'org.gnome.Software.desktop', 'gnome-control-center.desktop']" b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'" b'org.gnome.desktop.interface' b'clock-format' b"'12h'" b'org.gnome.desktop.interface' b'text-scaling-factor' b'1.25' InstallationDate: Installed on 2017-07-18 (105 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-shell UpgradeStatus: Upgraded to artful on 2017-10-18 (12 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1729028/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1730044] Re: nautilus-desktop crashed with signal 5 in _XReply()
[Expired for nautilus (Ubuntu) because there has been no activity for 60 days.] ** Changed in: nautilus (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1730044 Title: nautilus-desktop crashed with signal 5 in _XReply() Status in nautilus package in Ubuntu: Expired Bug description: I dont know ProblemType: Crash DistroRelease: Ubuntu 17.10 Package: nautilus 1:3.26.0-0ubuntu1 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sat Nov 4 02:46:53 2017 ExecutablePath: /usr/bin/nautilus-desktop InstallationDate: Installed on 2017-10-22 (12 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) ProcCmdline: nautilus-desktop ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash Signal: 5 SourcePackage: nautilus StacktraceTop: ?? () from /usr/lib/x86_64-linux-gnu/libX11.so.6 ?? () from /usr/lib/x86_64-linux-gnu/libX11.so.6 _XReply () from /usr/lib/x86_64-linux-gnu/libX11.so.6 XIGetClientPointer () from /usr/lib/x86_64-linux-gnu/libXi.so.6 ?? () from /usr/lib/x86_64-linux-gnu/libgdk-3.so.0 Title: nautilus-desktop crashed with signal 5 in _XReply() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1730044/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1728778] Re: Touchpad not working after resuming from suspend
[Expired for gdm3 (Ubuntu) because there has been no activity for 60 days.] ** Changed in: gdm3 (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1728778 Title: Touchpad not working after resuming from suspend Status in gdm3 package in Ubuntu: Expired Status in gnome-shell package in Ubuntu: Expired Bug description: I am using ubuntu 17.10 (intel i3, 16gb ram ). my mouse doesn't works once I have suspended the pc when i close the lid and reopens it To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1728778/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1730365] Re: pulseaudio keeps crashing and the audiom drops out
[Expired for pulseaudio (Ubuntu) because there has been no activity for 60 days.] ** Changed in: pulseaudio (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1730365 Title: pulseaudio keeps crashing and the audiom drops out Status in pulseaudio package in Ubuntu: Expired Bug description: 1). 21:48:17 ⌂197% grizzlysmit@killashandra:~ 4m23s $ lsb_release -rd Description: Ubuntu 17.10 Release: 17.10 21:54:30 ⌂217% grizzlysmit@killashandra:~ 2s $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 17.10 Release: 17.10 Codename: artful 2). $ apt-cache policy pulseaudio pulseaudio: Installed: 1:10.0-2ubuntu3 Candidate: 1:10.0-2ubuntu3 Version table: *** 1:10.0-2ubuntu3 500 500 http://au.archive.ubuntu.com/ubuntu artful/main amd64 Packages 100 /var/lib/dpkg/status 3). I expected pulse to just keep running like it always did under previous releases of Ubuntu 4). It keeps dropping out after a day or so no sound and settings (gnome-control-center sound) to it cannot connect to it running pulseaudio& in a shell fixes it ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: pulseaudio 1:10.0-2ubuntu3 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Mon Nov 6 21:44:08 2017 InstallationDate: Installed on 2017-07-24 (104 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) SourcePackage: pulseaudio UpgradeStatus: Upgraded to artful on 2017-10-20 (16 days ago) dmi.bios.date: 08/06/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A18 dmi.board.name: 0G261D dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA18:bd08/06/2013:svnDellInc.:pnOptiPlex960:pvr:rvnDellInc.:rn0G261D:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 960 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1730365/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741591] [NEW] PCI/internal sound card not detected
Public bug reported: I have an HP 15-CC129TX Laptop with Intel Corporation Sunrise Point-LP HD Audio. But Ubuntu 17.10 is not detecting my sound card and is displaying dummy output in my sound settings. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13 Uname: Linux 4.13.0-21-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sat Jan 6 09:07:37 2018 InstallationDate: Installed on 2018-01-05 (0 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Title: PCI/internal sound card not detected UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/25/2017 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 83F9 dmi.board.vendor: HP dmi.board.version: 46.40 dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.22:bd08/25/2017:svnHP:pnHPPavilionLaptop15-cc1xx:pvrType1ProductConfigId:rvnHP:rn83F9:rvr46.40:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV HP Pavilion dmi.product.name: HP Pavilion Laptop 15-cc1xx dmi.product.version: Type1ProductConfigId dmi.sys.vendor: HP ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug artful wayland-session -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1741591 Title: PCI/internal sound card not detected Status in alsa-driver package in Ubuntu: New Bug description: I have an HP 15-CC129TX Laptop with Intel Corporation Sunrise Point-LP HD Audio. But Ubuntu 17.10 is not detecting my sound card and is displaying dummy output in my sound settings. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13 Uname: Linux 4.13.0-21-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sat Jan 6 09:07:37 2018 InstallationDate: Installed on 2018-01-05 (0 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Title: PCI/internal sound card not detected UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/25/2017 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 83F9 dmi.board.vendor: HP dmi.board.version: 46.40 dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.22:bd08/25/2017:svnHP:pnHPPavilionLaptop15-cc1xx:pvrType1ProductConfigId:rvnHP:rn83F9:rvr46.40:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV HP Pavilion dmi.product.name: HP Pavilion Laptop 15-cc1xx dmi.product.version: Type1ProductConfigId dmi.sys.vendor: HP To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1741591/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741571] Re: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from oth
*** This bug is a duplicate of bug 1725928 *** https://bugs.launchpad.net/bugs/1725928 ** This bug has been marked a duplicate of bug 1725928 package libsane1 1.0.27-1~experimental2ubuntu1: multiarch packages with differing files -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to sane-backends in Ubuntu. https://bugs.launchpad.net/bugs/1741571 Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 Status in sane-backends package in Ubuntu: New Bug description: This bug occurred when I logged into Ubuntu with the Deepin Desktop. ProblemType: Package DistroRelease: Ubuntu 17.10 Package: libsane1 1.0.27-1~experimental2ubuntu2.1 ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13 Uname: Linux 4.13.0-21-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 Date: Fri Jan 5 16:07:00 2018 DuplicateSignature: package:libsane1:1.0.27-1~experimental2ubuntu2.1 Unpacking libsane1:i386 (1.0.27-1~experimental2ubuntu2.1) ... dpkg: error processing archive /tmp/apt-dpkg-install-kBMXPm/097-libsane1_1.0.27-1~experimental2ubuntu2.1_i386.deb (--unpack): trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 ErrorMessage: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 InstallationDate: Installed on 2017-07-24 (165 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 3.6.3-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 2.7.14-2ubuntu1 RelatedPackageVersions: dpkg 1.18.24ubuntu1 apt 1.5.1 SourcePackage: sane-backends Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 UpgradeStatus: Upgraded to artful on 2017-11-02 (64 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1741571/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741588] [NEW] Categories in Ubuntu Software don't work
Public bug reported: I'm a developer on the Polarr team for Linux, and users should be able to find the Polarr app under the Photography category of the Ubuntu Software store. I attached a screenshot of the Photography category in the Ubuntu 16.04 Software store. The other categories are similarly non-functional. As you can see, there are only ellipses where there should be icons and descriptive text for each of the photography applications. Clicking on the items doesn't do anything. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubuntu-software 3.20.5-0ubuntu0.16.04.7 ProcVersionSignature: Ubuntu 4.10.0-42.46~16.04.1-generic 4.10.17 Uname: Linux 4.10.0-42-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.1-0ubuntu2.15 Architecture: amd64 CurrentDesktop: Unity Date: Thu Jan 4 10:41:25 2018 InstallationDate: Installed on 2017-12-19 (16 days ago) InstallationMedia: Ubuntu 16.04.3 LTS "Xenial Xerus" - Release amd64 (20170801) SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gnome-software (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial ** Attachment added: "Screenshot from 2018-01-04 10-44-44.png" https://bugs.launchpad.net/bugs/1741588/+attachment/5031689/+files/Screenshot%20from%202018-01-04%2010-44-44.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-software in Ubuntu. https://bugs.launchpad.net/bugs/1741588 Title: Categories in Ubuntu Software don't work Status in gnome-software package in Ubuntu: New Bug description: I'm a developer on the Polarr team for Linux, and users should be able to find the Polarr app under the Photography category of the Ubuntu Software store. I attached a screenshot of the Photography category in the Ubuntu 16.04 Software store. The other categories are similarly non- functional. As you can see, there are only ellipses where there should be icons and descriptive text for each of the photography applications. Clicking on the items doesn't do anything. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubuntu-software 3.20.5-0ubuntu0.16.04.7 ProcVersionSignature: Ubuntu 4.10.0-42.46~16.04.1-generic 4.10.17 Uname: Linux 4.10.0-42-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.1-0ubuntu2.15 Architecture: amd64 CurrentDesktop: Unity Date: Thu Jan 4 10:41:25 2018 InstallationDate: Installed on 2017-12-19 (16 days ago) InstallationMedia: Ubuntu 16.04.3 LTS "Xenial Xerus" - Release amd64 (20170801) SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1741588/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1739800] Re: Please remove gnome-python from Ubuntu
** No longer affects: rapid-photo-downloader (Ubuntu) ** Description changed: gnome-python and pyorbit have been removed from Debian Testing because it is an old GNOME2 library that hasn't been maintained in years. It will take some time for those packages to be removed from Debian Unstable, but I don't think we should ship gnome-python in Ubuntu 18.04 LTS. I am filing this bug now in particular to provide early notice for the Ubuntu-specific packages firmware-tools and gnome-activity-journal. Both of those projects were abandoned upstream years ago. https://github.com/dell/firmware-tools https://code.launchpad.net/~gnome-zeitgeist/gnome-activity-journal/trunk This bug depends on LP: #1739797 (removal of gnome-python-desktop). (Therefore, I am not adding tasks here for packages on that list.) $ reverse-depends src:gnome-python Reverse-Recommends == * colorname (for python-gnome2) * lottanzb (for python-gnome2) * sbackup (for python-gconf) * vusb-analyzer (for python-gnome2) Reverse-Depends === * aptoncd (for python-gnome2) * firmware-tools-gui(for python-gnome2) * gco (for python-gnome2) * gdesklets (for python-gnome2) * ghextris (for python-gnome2) * gjots2(for python-gnome2) * glipper (for python-gconf) * gnome-activity-journal(for python-gnome2) * gnome-activity-journal(for python-gconf) * gnome-blog(for python-gconf) * gnome-blog(for python-gnome2) * gnome-btdownload (for python-gconf) * gnome-btdownload (for python-gnome2) * gnome-specimen(for python-gnome2) * guake (for python-gconf) * hamster-applet(for python-gconf) * hamster-applet(for python-gnome2) * labyrinth (for python-gconf) * lybniz(for python-gnome2) * postr (for python-gnome2) * postr (for python-gconf) * pybliographer (for python-gnome2) * pyrenamer (for python-gconf) * python-gnome2-desktop-dev (for python-gnome2-dev) * python-sugar-toolkit (for python-gconf) - * rapid-photo-downloader(for python-gconf) - * rapid-photo-downloader(for python-gnome2) * revelation(for python-gnome2) * routeplanner-gnome(for python-gnome2) * sbackup-gtk (for python-gnome2) * specto(for python-gnome2) * x-tile(for python-gconf) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rapid-photo-downloader in Ubuntu. https://bugs.launchpad.net/bugs/1739800 Title: Please remove gnome-python from Ubuntu Status in aptoncd package in Ubuntu: New Status in colorname package in Ubuntu: New Status in firmware-tools package in Ubuntu: New Status in gco package in Ubuntu: New Status in ghextris package in Ubuntu: New Status in gjots2 package in Ubuntu: New Status in glipper package in Ubuntu: New Status in gnome-activity-journal package in Ubuntu: New Status in gnome-blog package in Ubuntu: New Status in gnome-btdownload package in Ubuntu: New Status in gnome-python package in Ubuntu: New Status in gnome-specimen package in Ubuntu: New Status in guake package in Ubuntu: New Status in guake-indicator package in Ubuntu: New Status in labyrinth package in Ubuntu: New Status in lottanzb package in Ubuntu: New Status in lybniz package in Ubuntu: New Status in postr package in Ubuntu: New Status in pybliographer package in Ubuntu: New Status in pyorbit package in Ubuntu: New Status in pyrenamer package in Ubuntu: New Status in revelation package in Ubuntu: New Status in routeplanner package in Ubuntu: New Status in sbackup package in Ubuntu: New Status in specto package in Ubuntu: New Status in vusb-analyzer package in Ubuntu: New Status in x-tile package in Ubuntu: New Bug description: gnome-python and pyorbit have been removed from Debian Testing because it is an old GNOME2 library that hasn't been maintained in years. It will take some time for those packages to be removed from Debian Unstable, but I don't think we should ship gnome-python in Ubuntu 18.04 LTS. I am filing this bug now in particular to provide early notice for the Ubuntu-specific packages firmware-tools and gnome-activity-journal. Both of those projects were abandoned upstream years ago. https://github.com/dell/firmware-tools https://code.launchpad.net/~gnome-zeitgeist/gnome-activity-journal/trunk This bug depen
[Desktop-packages] [Bug 1741581] Re: buggy apparmor profile
And a corresponding bug in the AppArmor project in case we wish to handle it there instead: https://bugs.launchpad.net/apparmor/+bug/1741584 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice-l10n in Ubuntu. https://bugs.launchpad.net/bugs/1741581 Title: buggy apparmor profile Status in libreoffice package in Ubuntu: New Status in libreoffice-l10n package in Ubuntu: New Bug description: Nibaldo González has reported that the LibreOffice AppArmor profile has mistakes in it: https://lists.ubuntu.com/archives/apparmor/2018-January/011418.html > In this case, AppArmor grants write and read permissions to files with > extension: '.#.txt', '.#All', '.the', '.format', '.#.xml', '.and', > etc. Clearly, the profile must be fixed. I've confirmed this via apparmor_parser -Qd output on a slightly modified version of the source file: $ apparmor_parser -Qd < foo | grep '#' Warning from stdin (line 1): apparmor_parser: cannot use or update cache, disable, or force-complain via stdin Mode: rwak: Name: ({/home//*,/root,/mnt,/media}/**.{[tT][xX][tT],#.txt,{,f,F}[oO][dDtT][tTsSpPbBgGfF],#All,the,open,document,format,[xX][mMsS][lL],#.xml,and,xsl,[pP][dD][fF],#.pdf,[uU][oO][fFtTsSpP],#Unified,office,format,{,x,X}[hH][tT][mM]{,l,L},#(x)htm(l),[jJ][pP][gG],[jJ][pP][eE][gG],[pP][nN][gG],[sS][vV][gG],[sS][vV][gG][zZ]99251,[tT][iI][fF],[tT][iI][fF][fF],[dD][oO][cCtT]{,x,X},[rR][tT][fF],[xX][lL][sSwWtT]{,x,X},[dD][iIbB][fF],#.dif,dbf,[cCtT][sS][vV],#.tsv,.csv,[sS][lL][kK],[pP][pP][tTsS]{,x,X},[pP][oO][tT]{,m,M},[sS][wW][fF],#Flash,[pP][sS][dD],#Photoshop,[mM][mM][lL]}) The comments on the variable assignment lines are carried through to the policy. Thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1741581/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741581] [NEW] buggy apparmor profile
Public bug reported: Nibaldo González has reported that the LibreOffice AppArmor profile has mistakes in it: https://lists.ubuntu.com/archives/apparmor/2018-January/011418.html > In this case, AppArmor grants write and read permissions to files with > extension: '.#.txt', '.#All', '.the', '.format', '.#.xml', '.and', > etc. Clearly, the profile must be fixed. I've confirmed this via apparmor_parser -Qd output on a slightly modified version of the source file: $ apparmor_parser -Qd < foo | grep '#' Warning from stdin (line 1): apparmor_parser: cannot use or update cache, disable, or force-complain via stdin Mode: rwak: Name: ({/home//*,/root,/mnt,/media}/**.{[tT][xX][tT],#.txt,{,f,F}[oO][dDtT][tTsSpPbBgGfF],#All,the,open,document,format,[xX][mMsS][lL],#.xml,and,xsl,[pP][dD][fF],#.pdf,[uU][oO][fFtTsSpP],#Unified,office,format,{,x,X}[hH][tT][mM]{,l,L},#(x)htm(l),[jJ][pP][gG],[jJ][pP][eE][gG],[pP][nN][gG],[sS][vV][gG],[sS][vV][gG][zZ]99251,[tT][iI][fF],[tT][iI][fF][fF],[dD][oO][cCtT]{,x,X},[rR][tT][fF],[xX][lL][sSwWtT]{,x,X},[dD][iIbB][fF],#.dif,dbf,[cCtT][sS][vV],#.tsv,.csv,[sS][lL][kK],[pP][pP][tTsS]{,x,X},[pP][oO][tT]{,m,M},[sS][wW][fF],#Flash,[pP][sS][dD],#Photoshop,[mM][mM][lL]}) The comments on the variable assignment lines are carried through to the policy. Thanks ** Affects: libreoffice (Ubuntu) Importance: Undecided Status: New ** Affects: libreoffice-l10n (Ubuntu) Importance: Undecided Status: New ** Also affects: libreoffice-l10n (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1741581 Title: buggy apparmor profile Status in libreoffice package in Ubuntu: New Status in libreoffice-l10n package in Ubuntu: New Bug description: Nibaldo González has reported that the LibreOffice AppArmor profile has mistakes in it: https://lists.ubuntu.com/archives/apparmor/2018-January/011418.html > In this case, AppArmor grants write and read permissions to files with > extension: '.#.txt', '.#All', '.the', '.format', '.#.xml', '.and', > etc. Clearly, the profile must be fixed. I've confirmed this via apparmor_parser -Qd output on a slightly modified version of the source file: $ apparmor_parser -Qd < foo | grep '#' Warning from stdin (line 1): apparmor_parser: cannot use or update cache, disable, or force-complain via stdin Mode: rwak: Name: ({/home//*,/root,/mnt,/media}/**.{[tT][xX][tT],#.txt,{,f,F}[oO][dDtT][tTsSpPbBgGfF],#All,the,open,document,format,[xX][mMsS][lL],#.xml,and,xsl,[pP][dD][fF],#.pdf,[uU][oO][fFtTsSpP],#Unified,office,format,{,x,X}[hH][tT][mM]{,l,L},#(x)htm(l),[jJ][pP][gG],[jJ][pP][eE][gG],[pP][nN][gG],[sS][vV][gG],[sS][vV][gG][zZ]99251,[tT][iI][fF],[tT][iI][fF][fF],[dD][oO][cCtT]{,x,X},[rR][tT][fF],[xX][lL][sSwWtT]{,x,X},[dD][iIbB][fF],#.dif,dbf,[cCtT][sS][vV],#.tsv,.csv,[sS][lL][kK],[pP][pP][tTsS]{,x,X},[pP][oO][tT]{,m,M},[sS][wW][fF],#Flash,[pP][sS][dD],#Photoshop,[mM][mM][lL]}) The comments on the variable assignment lines are carried through to the policy. Thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1741581/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1655348] Re: gpu-manager Error: can't open /lib/modules/
I have a similar bug with the same premise, freezes using Google Chrome. They tend to be very random, I only have them during playback. Google Chrome: 63.0.3239.132 (64bits) (Although numerous versions before had the same problem) Ubuntu 17.10 (4.13.0-21-generic) Running on a Pentium N3530, no discrete GPU. The logs are almost identical. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1655348 Title: gpu-manager Error: can't open /lib/modules/ Status in ubuntu-drivers-common package in Ubuntu: Confirmed Bug description: At least once a day there is an unexpected desktop freeze incl. mouse and keyboard. Even magic-sys-rq isn't possible, only hard switch-off. From smartmontools I can exclude a hardware failure. I've found that gpu-manager and systemd fail to load kernel modules. This is among the output of journalctl | grep modules Jan 10 13:12:34 systemd[1]: systemd-modules-load.service: Unit entered failed state. Jan 10 13:12:34 systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. Jan 10 13:12:49 gpu-manager[791]: Error: can't open /lib/modules/4.4.0-57-generic/updates/dkms Jan 10 13:12:49 gpu-manager[791]: Error: can't open /lib/modules/4.4.0-57-generic/updates/dkms (terminal-output attached) dito with latest kernel Jan 11 07:53:04 gpu-manager[786]: Error: can't open /lib/modules/4.4.0-59-generic/updates/dkms Jan 11 07:53:04 gpu-manager[786]: Error: can't open /lib/modules/4.4.0-59-generic/updates/dkms ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubuntu-drivers-common 1:0.4.17.2 ProcVersionSignature: Ubuntu 4.4.0-57.78-generic 4.4.35 Uname: Linux 4.4.0-57-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.4 Architecture: amd64 CurrentDesktop: Unity Date: Tue Jan 10 14:37:00 2017 InstallationDate: Installed on 2012-02-05 (1801 days ago) InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Alpha amd64 (20120204) SourcePackage: ubuntu-drivers-common UpgradeStatus: Upgraded to xenial on 2016-08-01 (162 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1655348/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1222183] Re: package emacsen-common 2.0.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
I fix this by next commands: wget http://archive.ubuntu.com/ubuntu/pool/universe/x/xemacs21/xemacs21-mule_21.4.22-4ubuntu3_i386.deb dpkg -i --force-all ./xemacs21-mule_21.4.22-4ubuntu3_i386.deb apt-get -f install apt remove xemacs21-mule Hmmm... emacsen-common require xemacs, xemacs21 require emacsen-common, I don't need this stuff at all )) Just finish upgrade. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to emacsen-common in Ubuntu. https://bugs.launchpad.net/bugs/1222183 Title: package emacsen-common 2.0.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 Status in emacsen-common package in Ubuntu: Confirmed Bug description: Ugrade from 12.10 to 13.04 Setting up emacsen-common (2.0.3) ... Install emacsen-common for xemacs21 emacsen-common: Handling install of emacsen flavor xemacs21 /usr/lib/emacsen-common/packages/install/emacsen-common: 29: /usr/lib/emacsen-common/packages/install/emacsen-common: xemacs21: not found ERROR: install script from emacsen-common package failed dpkg: error processing emacsen-common (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of cmake-data: cmake-data depends on emacsen-common; however: Package emacsen-common is not configured yet. dpkg: error processing cmake-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of cmake: cmake depends on cmake-data (= 2.8.9-0ubuntu1); however: Package cmake-data is not configured yet. dpkg: error processing cmake (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xemacs21-nomule: xemacs21-nomule depends on emacsen-common; however: Package emacsen-common is not configured yet. dpkg: error processing xemacs21-nomule (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xemacs21: xemacs21 depends on xemacs21-mule (>= 21.4.22-3.2ubuntu2) | xemacs21-mule-canna-wnn (>= 21.4.22-3.2ubuntu2) | xemacs21-nomule (>= 21.4.22-3.2ubuntu2); however: Package xeNo apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already macs21-mule is not installed. Package xemacs21-mule-canna-wnn is not installed. Package xemacs21-nomule is not configured yet. dpkg: error processing xemacs21 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xemacs21-support: xemacs21-support depends on emacsen-common; however: Package emacsen-common is not configured yet. xemacs21-support depends on xemacs21 (= 21.4.22-3.2ubuntu2); however: Package xemacs21 is not configured yet. dpkg: error processing xemacs21-support (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xemacs21-bin: xemacs21-bin depends on xemacs21-support (= 21.4.22-3.2ubuntu2); however: Package xemacs21-support is not configured yet. dpkg: error processing xemacs21-bin (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: emacsen-common cmake-data cmake xemacs21-nomule xemacs21 xemacs21-support xemacs21-bin E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package DistroRelease: Ubuntu 12.10 Package: emacsen-common 2.0.3 ProcVersionSignature: Ubuntu 3.5.0-40.62-generic 3.5.7.20 Uname: Linux 3.5.0-40-generic x86_64 ApportVersion: 2.6.1-0ubuntu12 Architecture: amd64 Date: Sat Sep 7 17:21:48 2013 Dependencies: DuplicateSignature: package:emacsen-common:2.0.3:subprocess installed post-installation script returned error exit status 1 ErrorMessage:
[Desktop-packages] [Bug 1222183] Re: package emacsen-common 2.0.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Approve problem after upgrading from 14.04.2 to 16.04.3. Настраивается пакет emacsen-common (2.0.8) … Install emacsen-common for xemacs21 emacsen-common: Handling install of emacsen flavor xemacs21 /usr/lib/emacsen-common/packages/install/emacsen-common: 29: /usr/lib/emacsen-common/packages/install/emacsen-common: xemacs21: not found ERROR: install script from emacsen-common package failed dpkg: ошибка при обработке пакета emacsen-common (--configure): подпроцесс установлен сценарий post-installation возвратил код ошибки 1 dpkg: зависимости пакетов не позволяют настроить пакет dictionaries-common: dictionaries-common зависит от emacsen-common (>= 2.0.5), однако: Пакет emacsen-common пока не настроен. dpkg: ошибка при обработке пакета dictionaries-common (--configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет aspell: aspell зависит от dictionaries-common (>> 0.40), однако: Пакет dictionaries-common пока не настроен. dpkg: ошибка при обработке пакета aspell (--configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет aspell-en: aspell-en зависит от aspell (>= 0.60.3-2), однако: Пакет aspell пока не настроен. aspell-en зависит от dictionaries-common (>= 0.49.2), однако: Пакет dictionaries-common пока не настроен. dpkg: ошибка при обработке пакета aspell-en (--configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет hunspell-en-ca: hunspell-en-ca зависит от dictionaries-common, однако: Пакет dictionaries-common пока не настроен. dpkg: ошибка при обработке пакета hunspell-en-ca (--configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет hunspell-en-us: hunspell-en-us зависит от dictionaries-common (>= 0.10), однако: Пакет dictionaries-common пока не настроен. dpkg: ошибка при обработке пакета hunspell-en-us (--configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет hyphen-ru: hyphen-ru зависит от dictionaries-common (>= 0.10) | openoffice.org-updatedicts, однако: Пакет dictionaries-common пока не настроен. Пакет openoffice.org-updatedicts не установлен. Пакет dictionaries-common, предоставляющий openoffice.org-updatedicts, пока не настроен. dpkg: ошибка при обработке пакета hyphen-ru (--configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет hyphen-en-us: hyphen-en-us зависит от dictionaries-common (>= 0.10) | openoffice.org-updatedicts, однако: Пакет dictionaries-common пока не настроен. Пакет openoffice.org-updatedicts не установлен. Пакет dictionaries-common, предоставляющий openoffice.org-updatedicts, пока не настроен. dpkg: ошибка при обработке пакета hyphen-en-us (--configure): проблемы зависимостей — оставляем не настроенным dpkg: зависимости пакетов не позволяют настроить пакет miscfiles: miscfiles зависит от dictionaries-common (>= 1.0), однако: Пакет dictionaries-common пока не настроен. dpkg: ошибка при обработке пакета miscfiles (--configure): проблемы зависимостей — оставляем не настроенным При обработке следующих пакетов произошли ошибки: emacsen-common dictionaries-common aspell aspell-en hunspell-en-ca hunspell-en-us hyphen-ru hyphen-en-us miscfiles -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to emacsen-common in Ubuntu. https://bugs.launchpad.net/bugs/1222183 Title: package emacsen-common 2.0.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 Status in emacsen-common package in Ubuntu: Confirmed Bug description: Ugrade from 12.10 to 13.04 Setting up emacsen-common (2.0.3) ... Install emacsen-common for xemacs21 emacsen-common: Handling install of emacsen flavor xemacs21 /usr/lib/emacsen-common/packages/install/emacsen-common: 29: /usr/lib/emacsen-common/packages/install/emacsen-common: xemacs21: not found ERROR: install script from emacsen-common package failed dpkg: error processing emacsen-common (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of cmake-data: cmake-data depends on emacsen-common; however: Package emacsen-common is not configured yet. dpkg: error processing cmake-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of cmake: cmake depends on cmake-data (= 2.8.9-0ubuntu1); however: Package cmake-data is not configured yet. dpkg: error processing cmake (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xemacs21-nomule: xemacs21-nomule depends on emacsen-common; however: Package
[Desktop-packages] [Bug 1222183] Re: package emacsen-common 2.0.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
root@spire:~# dpkg -l | grep emacs | cut -d' ' -f3 | xargs apt-get -y purge Чтение списков пакетов… Готово Построение дерева зависимостей Чтение информации о состоянии… Готово Некоторые пакеты невозможно установить. Возможно, вы просите невозможного, или же используете нестабильную версию дистрибутива, где запрошенные вами пакеты ещё не созданы или были удалены из Incoming. Следующая информация, возможно, поможет вам: Пакеты, имеющие неудовлетворённые зависимости: ubuntu-release-upgrader-gtk : Зависит: gir1.2-webkit2-4.0 но он не будет установлен или gir1.2-webkit-3.0 но он не будет установлен E: Ошибка, pkgProblemResolver::Resolve сгенерировал повреждённые пакеты. Это может быть вызвано отложенными (held) пакетами. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to emacsen-common in Ubuntu. https://bugs.launchpad.net/bugs/1222183 Title: package emacsen-common 2.0.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 Status in emacsen-common package in Ubuntu: Confirmed Bug description: Ugrade from 12.10 to 13.04 Setting up emacsen-common (2.0.3) ... Install emacsen-common for xemacs21 emacsen-common: Handling install of emacsen flavor xemacs21 /usr/lib/emacsen-common/packages/install/emacsen-common: 29: /usr/lib/emacsen-common/packages/install/emacsen-common: xemacs21: not found ERROR: install script from emacsen-common package failed dpkg: error processing emacsen-common (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of cmake-data: cmake-data depends on emacsen-common; however: Package emacsen-common is not configured yet. dpkg: error processing cmake-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of cmake: cmake depends on cmake-data (= 2.8.9-0ubuntu1); however: Package cmake-data is not configured yet. dpkg: error processing cmake (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xemacs21-nomule: xemacs21-nomule depends on emacsen-common; however: Package emacsen-common is not configured yet. dpkg: error processing xemacs21-nomule (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xemacs21: xemacs21 depends on xemacs21-mule (>= 21.4.22-3.2ubuntu2) | xemacs21-mule-canna-wnn (>= 21.4.22-3.2ubuntu2) | xemacs21-nomule (>= 21.4.22-3.2ubuntu2); however: Package xeNo apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already macs21-mule is not installed. Package xemacs21-mule-canna-wnn is not installed. Package xemacs21-nomule is not configured yet. dpkg: error processing xemacs21 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xemacs21-support: xemacs21-support depends on emacsen-common; however: Package emacsen-common is not configured yet. xemacs21-support depends on xemacs21 (= 21.4.22-3.2ubuntu2); however: Package xemacs21 is not configured yet. dpkg: error processing xemacs21-support (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xemacs21-bin: xemacs21-bin depends on xemacs21-support (= 21.4.22-3.2ubuntu2); however: Package xemacs21-support is not configured yet. dpkg: error processing xemacs21-bin (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: emacsen-common cmake-data cmake xemacs21-nomule xemacs21 xemacs21-support xemacs21-bin E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: P
[Desktop-packages] [Bug 1296020] Re: [Asus U36JC] Non-existent display detected in both intel driver and nvidia driver (Optimus Laptop) (ubuntu trusty 14.04)
As a workaround the following executed on startup seems to work xrandr --output VGA-0 --off But it assumes the display will always be detected as VGA=0 and far from ideal -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-prime in Ubuntu. https://bugs.launchpad.net/bugs/1296020 Title: [Asus U36JC] Non-existent display detected in both intel driver and nvidia driver (Optimus Laptop) (ubuntu trusty 14.04) Status in nvidia-prime package in Ubuntu: Triaged Status in ubuntu-drivers-common package in Ubuntu: Fix Released Status in nvidia-prime source package in Precise: Triaged Status in ubuntu-drivers-common source package in Precise: Invalid Status in nvidia-prime source package in Trusty: Invalid Status in ubuntu-drivers-common source package in Trusty: Fix Released Bug description: SRU Request Systems with Optimus (Intel+NVIDIA GPUs) can have ghost VGA devices hardcoded in the BIOS. This leads the system into thinking that there is actually one more active output than there really is. [Impact] * The ghost VGA output confuses lightdm and the gnome-settings-daemon making the system unusable. [Test Case] * Install the nvidia binary driver, reboot, and check the output of the "xrandr -q" command - Expected: only the outputs that are actually connected will be marked as active. - Bad behavior: a non-existent VGA device will show up in the output. [Regression Potential] * Low, as it only disables CRT outputs in the nvidia driver. [Other Info] * N/A -- There is a non existent display detected in both intel driver only and nvidia 331 driver installation. The non existent display is "Unknown Display" shown in gnome-control-center --> display and "CRT-0" in nvidia-settings, and "VGA-0" in xrandr -q output. It will cause gdm failed to start. gnome-shell has some crazy layouts. lightdm will only occupy 2/3 of monitor in top left corner. I tested this in intel driver only environment. and nvidia-331 installation environment. My laptop is Asus U36JC. My monitor correct resolution is 1366x768. The following is the output of "xrandr -q" in gnome-shell with nvidia-331 installed: $ xrandr -q Screen 0: minimum 8 x 8, current 1366 x 768, maximum 8192 x 8192 VGA-0 connected primary 680x384+0+0 (normal left inverted right x axis y axis) 0mm x 0mm panning 1366x768+0+0 680x384 60.0*+ 1366x768 60.0 1360x768 60.0 HDMI-0 disconnected (normal left inverted right x axis y axis) LVDS-1-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 165mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 60.0 960x720 60.0 928x696 60.1 896x672 60.0 960x600 60.0 960x540 60.0 800x600 60.0 60.3 56.2 840x525 60.0 59.9 800x512 60.2 700x525 60.0 640x512 60.0 720x450 59.9 640x480 60.0 59.9 680x384 59.8 60.0 576x432 60.1 512x384 60.0 400x300 60.3 56.3 320x240 60.1 VGA-1-0 disconnected (normal left inverted right x axis y axis) HDMI-1-0 disconnected (normal left inverted right x axis y axis) DisplayPort-1-0 disconnected (normal left inverted right x axis y axis) 1366x768 (0x46) 69.3MHz h: width 1366 start 1425 end 1464 total 1472 skew 0 clock 47.1KHz v: height 768 start 773 end 782 total 785 clock 60.0Hz 1360x768 (0x48) 72.0MHz h: width 1360 start 1408 end 1440 total 1520 skew 0 clock 47.4KHz v: height 768 start 771 end 781 total 790 clock 60.0Hz 680x384 (0x5c) 36.0MHz h: width 680 start 704 end 720 total 760 skew 0 clock 47.4KHz v: height 384 start 385 end 390 total 395 clock 60.0Hz The following is the output of "xrandr -q" in lxde with nvidia-331 installed: $ xrandr -q Screen 0: minimum 8 x 8, current 1366 x 768, maximum 8192 x 8192 VGA-0 connected primary 1024x768+31+0 (normal left inverted right x axis y axis) 0mm x 0mm panning 1366x768+0+0 680x38460.0 + 1366x768 60.0 1360x768 60.0 HDMI-0 disconnected (normal left inverted right x axis y axis) LVDS-1-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 165mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 60.0 960x72060.0 928x69660.1 896x67260.0 960x60060.0 960x54060.0 800x60060.0 60.3 56.2 840x52560.0 59.9 800x51260.2 700x52560.0 640x51260.0 720x45059.9 640x48060.0 59.9 680x38459.8 60.0 576x43260.1 512x38460.0 400x30060.3 56.3 320x24060.1 VGA-1-0 disconnected (normal left inverted right x axis y axis) HDMI-1-0 disconnected (normal left inverted right x axis y axis)
[Desktop-packages] [Bug 1577197] Re: Pulseaudio bluez5-util.c: TryAcquire() failed - Operation Not Authorized
Im still experiencing this problem on Ubuntu 17.10 (very infrequently). I'm getting: [pulseaudio] bluez5-util.c: Transport TryAcquire() failed for transport /org/bluez/hci0/dev_00_0C_8A_86_6A_94/fd0 (Operation Not Authorized) often even in between 2 videos on youtube. This will freeze any video playing btw. I can resolve with `pulseaudio -k` and repairing the bluetooth device. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1577197 Title: Pulseaudio bluez5-util.c: TryAcquire() failed - Operation Not Authorized Status in bluez package in Ubuntu: Fix Released Status in indicator-sound package in Ubuntu: Invalid Status in pulseaudio package in Ubuntu: Fix Released Bug description: Pulseaudio outright stops audio via Bluetooth after sleep or prolonged period of time. Only restart fixes the issue. This started early 2016 in 15.10. Issue is discussed here as well http://askubuntu.com/questions/763539/bluetooth-speaker-no-sound-in-ubuntu-16-04 and mentioned in other unrelated bugs. Ubuntu Xenial 16.04 LTS The log below: May 1 17:18:07 jalexoidmobile pulseaudio[2884]: [pulseaudio] module-bluez5-device.c: Default profile not connected, selecting off profile May 1 17:18:07 jalexoidmobile bluetoothd[7349]: /org/bluez/hci0/dev_00_02_3C_05_99_F2/fd4: fd(35) ready May 1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Supervising 3 threads of 1 processes of 1 users. May 1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Successfully made thread 10967 of process 2884 (n/a) owned by '1000' RT at priority 5. May 1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Supervising 4 threads of 1 processes of 1 users. May 1 17:18:07 jalexoidmobile pulseaudio[2884]: [pulseaudio] bluez5-util.c: Transport TryAcquire() failed for transport /org/bluez/hci0/dev_00_02_3C_05_99_F2/fd4 (Operation Not Authorized) May 1 17:18:07 jalexoidmobile kernel: [20583.032442] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input24 May 1 17:18:19 jalexoidmobile pulseaudio[2884]: [pulseaudio] sink-input.c: Failed to create sink input: sink is suspended. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 04f2:b2da Chicony Electronics Co., Ltd thinkpad t430s camera Bus 001 Device 008: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad] Bus 001 Device 004: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF advanced mode) Bus 001 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [20388.983474] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [20389.070114] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6 [20389.070120] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [20389.070122] usb 1-1.4: Product: BCM20702A0 [20389.070124] usb 1-1.4: Manufacturer: Broadcom Corp [20389.070126] usb 1-1.4: SerialNumber: 446D578686DD [20389.076232] Bluetooth: hci0: BCM: chip id 63 [20389.092220] Bluetooth: hci0: BCM20702A [20389.093225] Bluetooth: hci0: BCM20702A1 (001.002.014) build [20389.551476] wlan0: authenticate with a0:63:91:2f:3f:ed [20389.554391] wlan0: send auth to a0:63:91:2f:3f:ed (try 1/3) [20389.557790] wlan0: authenticated [20389.558339] wlan0: associate with a0:63:91:2f:3f:ed (try 1/3) [20389.562209] wlan0: RX AssocResp from a0:63:91:2f:3f:ed (capab=0x1411 status=0 aid=2) [20389.581260] wlan0: associated [20389.581369] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [20389.830185] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 [20389.846186] Bluetooth: hci0: Broadcom Bluetooth Device [20418.269466] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input23 [20583.032442] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input24 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1577197/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1721428] Re: Artful (17.10) Session logout after screen turned off
That worked but I had to ask for access to bug tracking since I'm new to this. Just hope there's no confirmation link etc. email from Canonical since I lost access to mail account I used to create U1 acount way back then. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1721428 Title: Artful (17.10) Session logout after screen turned off Status in GNOME Shell: Unknown Status in Nouveau Xorg driver: New Status in gnome-shell package in Ubuntu: Incomplete Status in mutter package in Ubuntu: Incomplete Bug description: Whenever I turn off my screen, the computer (a desktop PC) logs me out of my session. Here is a discussion thread with users of similar issue: https://ubuntuforums.org/showthread.php?t=2372388&p=13694312&posted=1#post13694312 To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1721428/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741571] [NEW] package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from o
Public bug reported: This bug occurred when I logged into Ubuntu with the Deepin Desktop. ProblemType: Package DistroRelease: Ubuntu 17.10 Package: libsane1 1.0.27-1~experimental2ubuntu2.1 ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13 Uname: Linux 4.13.0-21-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 Date: Fri Jan 5 16:07:00 2018 DuplicateSignature: package:libsane1:1.0.27-1~experimental2ubuntu2.1 Unpacking libsane1:i386 (1.0.27-1~experimental2ubuntu2.1) ... dpkg: error processing archive /tmp/apt-dpkg-install-kBMXPm/097-libsane1_1.0.27-1~experimental2ubuntu2.1_i386.deb (--unpack): trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 ErrorMessage: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 InstallationDate: Installed on 2017-07-24 (165 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 3.6.3-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 2.7.14-2ubuntu1 RelatedPackageVersions: dpkg 1.18.24ubuntu1 apt 1.5.1 SourcePackage: sane-backends Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 UpgradeStatus: Upgraded to artful on 2017-11-02 (64 days ago) ** Affects: sane-backends (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package artful package-conflict -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to sane-backends in Ubuntu. https://bugs.launchpad.net/bugs/1741571 Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 Status in sane-backends package in Ubuntu: New Bug description: This bug occurred when I logged into Ubuntu with the Deepin Desktop. ProblemType: Package DistroRelease: Ubuntu 17.10 Package: libsane1 1.0.27-1~experimental2ubuntu2.1 ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13 Uname: Linux 4.13.0-21-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 Date: Fri Jan 5 16:07:00 2018 DuplicateSignature: package:libsane1:1.0.27-1~experimental2ubuntu2.1 Unpacking libsane1:i386 (1.0.27-1~experimental2ubuntu2.1) ... dpkg: error processing archive /tmp/apt-dpkg-install-kBMXPm/097-libsane1_1.0.27-1~experimental2ubuntu2.1_i386.deb (--unpack): trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 ErrorMessage: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 InstallationDate: Installed on 2017-07-24 (165 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 3.6.3-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 2.7.14-2ubuntu1 RelatedPackageVersions: dpkg 1.18.24ubuntu1 apt 1.5.1 SourcePackage: sane-backends Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 UpgradeStatus: Upgraded to artful on 2017-11-02 (64 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1741571/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741571] Re: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from oth
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to sane-backends in Ubuntu. https://bugs.launchpad.net/bugs/1741571 Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 Status in sane-backends package in Ubuntu: New Bug description: This bug occurred when I logged into Ubuntu with the Deepin Desktop. ProblemType: Package DistroRelease: Ubuntu 17.10 Package: libsane1 1.0.27-1~experimental2ubuntu2.1 ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13 Uname: Linux 4.13.0-21-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 Date: Fri Jan 5 16:07:00 2018 DuplicateSignature: package:libsane1:1.0.27-1~experimental2ubuntu2.1 Unpacking libsane1:i386 (1.0.27-1~experimental2ubuntu2.1) ... dpkg: error processing archive /tmp/apt-dpkg-install-kBMXPm/097-libsane1_1.0.27-1~experimental2ubuntu2.1_i386.deb (--unpack): trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 ErrorMessage: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 InstallationDate: Installed on 2017-07-24 (165 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 3.6.3-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 2.7.14-2ubuntu1 RelatedPackageVersions: dpkg 1.18.24ubuntu1 apt 1.5.1 SourcePackage: sane-backends Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other instances of package libsane1:i386 UpgradeStatus: Upgraded to artful on 2017-11-02 (64 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1741571/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1296020] Re: [Asus U36JC] Non-existent display detected in both intel driver and nvidia driver (Optimus Laptop) (ubuntu trusty 14.04)
Same here with Ubuntu 16.04 running on Lenovo T420s with NVidia NVS 4200M Screen 0: minimum 8 x 8, current 2624 x 900, maximum 16384 x 16384 VGA-0 connected 1024x768+1600+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.00*+ 1360x768 59.9659.80 1152x864 60.00 800x600 72.1960.3256.25 680x384 59.9659.80 640x480 59.94 512x384 60.00 400x300 72.19 320x240 60.05 LVDS-0 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm 1600x900 60.01*+ 40.00 DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) DP-2 disconnected (normal left inverted right x axis y axis) DP-3 disconnected (normal left inverted right x axis y axis) DP-4 disconnected (normal left inverted right x axis y axis) DP-5 disconnected (normal left inverted right x axis y axis) ** Attachment added: "gpu-manager.log" https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1296020/+attachment/5031664/+files/gpu-manager.log -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-prime in Ubuntu. https://bugs.launchpad.net/bugs/1296020 Title: [Asus U36JC] Non-existent display detected in both intel driver and nvidia driver (Optimus Laptop) (ubuntu trusty 14.04) Status in nvidia-prime package in Ubuntu: Triaged Status in ubuntu-drivers-common package in Ubuntu: Fix Released Status in nvidia-prime source package in Precise: Triaged Status in ubuntu-drivers-common source package in Precise: Invalid Status in nvidia-prime source package in Trusty: Invalid Status in ubuntu-drivers-common source package in Trusty: Fix Released Bug description: SRU Request Systems with Optimus (Intel+NVIDIA GPUs) can have ghost VGA devices hardcoded in the BIOS. This leads the system into thinking that there is actually one more active output than there really is. [Impact] * The ghost VGA output confuses lightdm and the gnome-settings-daemon making the system unusable. [Test Case] * Install the nvidia binary driver, reboot, and check the output of the "xrandr -q" command - Expected: only the outputs that are actually connected will be marked as active. - Bad behavior: a non-existent VGA device will show up in the output. [Regression Potential] * Low, as it only disables CRT outputs in the nvidia driver. [Other Info] * N/A -- There is a non existent display detected in both intel driver only and nvidia 331 driver installation. The non existent display is "Unknown Display" shown in gnome-control-center --> display and "CRT-0" in nvidia-settings, and "VGA-0" in xrandr -q output. It will cause gdm failed to start. gnome-shell has some crazy layouts. lightdm will only occupy 2/3 of monitor in top left corner. I tested this in intel driver only environment. and nvidia-331 installation environment. My laptop is Asus U36JC. My monitor correct resolution is 1366x768. The following is the output of "xrandr -q" in gnome-shell with nvidia-331 installed: $ xrandr -q Screen 0: minimum 8 x 8, current 1366 x 768, maximum 8192 x 8192 VGA-0 connected primary 680x384+0+0 (normal left inverted right x axis y axis) 0mm x 0mm panning 1366x768+0+0 680x384 60.0*+ 1366x768 60.0 1360x768 60.0 HDMI-0 disconnected (normal left inverted right x axis y axis) LVDS-1-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 165mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 60.0 960x720 60.0 928x696 60.1 896x672 60.0 960x600 60.0 960x540 60.0 800x600 60.0 60.3 56.2 840x525 60.0 59.9 800x512 60.2 700x525 60.0 640x512 60.0 720x450 59.9 640x480 60.0 59.9 680x384 59.8 60.0 576x432 60.1 512x384 60.0 400x300 60.3 56.3 320x240 60.1 VGA-1-0 disconnected (normal left inverted right x axis y axis) HDMI-1-0 disconnected (normal left inverted right x axis y axis) DisplayPort-1-0 disconnected (normal left inverted right x axis y axis) 1366x768 (0x46) 69.3MHz h: width 1366 start 1425 end 1464 total 1472 skew 0 clock 47.1KHz v: height 768 start 773 end 782 total 785 clock 60.0Hz 1360x768 (0x48) 72.0MHz h: width 1360 start 1408 end 1440 total 1520 skew 0 clock 47.4KHz v: height 768 start 771 end 781 total 790 clock 60.0Hz 680x384 (0x5c) 36.0MHz h: width 680 start 704 end 720 total 760 skew 0 clock 47.4KHz v: height 384 start 385 end 390 total 395 clock 60.0Hz The following is the output of "xrandr -q" in lxde with nvidia-331 installed: $ xrandr -q Screen 0: minimum 8 x 8, current 1366 x 768, maximum 8192 x 8192 VGA-0 connected primary 1024x768+31+0 (normal left inverted right x axis y ax
[Desktop-packages] [Bug 1741565] [NEW] package gtk-update-icon-cache (not installed) failed to install/upgrade: el subproceso script pre-installation nuevo devolvió el código de salida de error 2
Public bug reported: I don't know what happend ProblemType: Package DistroRelease: Ubuntu 17.04 Package: gtk-update-icon-cache (not installed) ProcVersionSignature: Ubuntu 4.4.0-97.120-generic 4.4.87 Uname: Linux 4.4.0-97-generic x86_64 ApportVersion: 2.20.4-0ubuntu4.9 AptOrdering: gtk-update-icon-cache:amd64: Install NULL: ConfigurePending Architecture: amd64 Date: Fri Jan 5 14:56:46 2018 DpkgHistoryLog: Start-Date: 2018-01-05 14:56:44 Commandline: apt --fix-broken install Requested-By: amartinez (1000) Install: gtk-update-icon-cache:amd64 (3.22.11-0ubuntu3, automatic) ErrorMessage: el subproceso script pre-installation nuevo devolvió el código de salida de error 2 InstallationDate: Installed on 2017-03-15 (296 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) RelatedPackageVersions: dpkg 1.18.10ubuntu2 apt 1.4.6~17.04.1 SourcePackage: gtk+3.0 Title: package gtk-update-icon-cache (not installed) failed to install/upgrade: el subproceso script pre-installation nuevo devolvió el código de salida de error 2 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gtk+3.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package zesty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1741565 Title: package gtk-update-icon-cache (not installed) failed to install/upgrade: el subproceso script pre-installation nuevo devolvió el código de salida de error 2 Status in gtk+3.0 package in Ubuntu: New Bug description: I don't know what happend ProblemType: Package DistroRelease: Ubuntu 17.04 Package: gtk-update-icon-cache (not installed) ProcVersionSignature: Ubuntu 4.4.0-97.120-generic 4.4.87 Uname: Linux 4.4.0-97-generic x86_64 ApportVersion: 2.20.4-0ubuntu4.9 AptOrdering: gtk-update-icon-cache:amd64: Install NULL: ConfigurePending Architecture: amd64 Date: Fri Jan 5 14:56:46 2018 DpkgHistoryLog: Start-Date: 2018-01-05 14:56:44 Commandline: apt --fix-broken install Requested-By: amartinez (1000) Install: gtk-update-icon-cache:amd64 (3.22.11-0ubuntu3, automatic) ErrorMessage: el subproceso script pre-installation nuevo devolvió el código de salida de error 2 InstallationDate: Installed on 2017-03-15 (296 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) RelatedPackageVersions: dpkg 1.18.10ubuntu2 apt 1.4.6~17.04.1 SourcePackage: gtk+3.0 Title: package gtk-update-icon-cache (not installed) failed to install/upgrade: el subproceso script pre-installation nuevo devolvió el código de salida de error 2 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1741565/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741546] [NEW] Dell Inspiron 15 5567 laptops's default speaker does not play the bass in audio
Public bug reported: Dell Inspiron 15 5567 comes with Realtek ALC3246 audio chipset. The sound card is perfect on Windows, very beautiful sound quality and sorround sound. But in ubuntu 16.04 the bass does not play also the sound quality not so impressive to hear. ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: alsa audio dell -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1741546 Title: Dell Inspiron 15 5567 laptops's default speaker does not play the bass in audio Status in alsa-driver package in Ubuntu: New Bug description: Dell Inspiron 15 5567 comes with Realtek ALC3246 audio chipset. The sound card is perfect on Windows, very beautiful sound quality and sorround sound. But in ubuntu 16.04 the bass does not play also the sound quality not so impressive to hear. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1741546/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 463120] Re: Full laptop speakers are not used to play audio files
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: alsa-driver (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/463120 Title: Full laptop speakers are not used to play audio files Status in alsa-driver package in Ubuntu: Confirmed Bug description: I use a LENOVO Y 500 series laptop, it has a Bass function , which fine in windows os. But when playing music files in unbuntu, the sound is very low and for some reason the Bass is not activated. The Bass switch is on but the is no effect on the volume on the laptop speakers. The volume is very low as compared to when i play music in Vista. Plzz help To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/463120/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1674106] Re: gnome-terminal-server crashed with SIGSEGV in g_type_check_instance_is_a()
*** This bug is a duplicate of bug 1438014 *** https://bugs.launchpad.net/bugs/1438014 Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: gnome-terminal (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-terminal in Ubuntu. https://bugs.launchpad.net/bugs/1674106 Title: gnome-terminal-server crashed with SIGSEGV in g_type_check_instance_is_a() Status in gnome-terminal package in Ubuntu: Confirmed Bug description: La aplicacion se cierra apenas trato de utilizarla ProblemType: Crash DistroRelease: Ubuntu 17.04 Package: gnome-terminal 3.20.2-1ubuntu6 ProcVersionSignature: Ubuntu 4.10.0-11.13-generic 4.10.1 Uname: Linux 4.10.0-11-generic x86_64 ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 Date: Sun Mar 19 09:52:29 2017 ExecutablePath: /usr/lib/gnome-terminal/gnome-terminal-server InstallationDate: Installed on 2017-03-09 (9 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Alpha amd64 (20170224) ProcCmdline: /usr/lib/gnome-terminal/gnome-terminal-server ProcEnviron: SHELL=/bin/bash PATH=(custom, no user) LANGUAGE=es_CO:es TERM=xterm-256color LANG=es_CO.UTF-8 SegvAnalysis: Segfault happened at: 0x7f8454a8bfd1 : testb $0x4,0x16(%rax) PC (0x7f8454a8bfd1) ok source "$0x4" ok destination "0x16(%rax)" (0x7001e) not located in a known VMA region (needed writable region)! SegvReason: writing unknown VMA Signal: 11 SourcePackage: gnome-terminal StacktraceTop: g_type_check_instance_is_a () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 gtk_widget_get_toplevel () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0 ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0 gtk_window_group_add_window () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0 gtk_window_set_transient_for () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0 Title: gnome-terminal-server crashed with SIGSEGV in g_type_check_instance_is_a() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/1674106/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1727320] Re: Screen turn on/off 3 times and DP-1-3 connected but nothing is connected [latitude e7470]
Actually, I've upgraded to the 1.18.5 BIOS, but still seeing the bug. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1727320 Title: Screen turn on/off 3 times and DP-1-3 connected but nothing is connected [latitude e7470] Status in linux package in Ubuntu: Fix Released Status in xserver-xorg-video-intel package in Ubuntu: Fix Released Bug description: Gnome-shell crash and restart after the login and the screen flicker 1 time (3 with wayland) in Ubuntu 17.10 with my DELL latitude e7470 laptop. If I go in display settings I notice a second monitor Synaptics Inc 24'' which doesn't exist in reality. In Wayland after the screen stop flickering I don't have any other problem and that monitor is not present there. xrandr | grep -i ' connected' eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 309mm x 174mm DP-1-3 connected (normal left inverted right x axis y axis) <-- I don't have anything connected to this port With Fedora 26 I don't have this problem but I'm not yet able to find what package is the culprit. I believe this problem is related to Displayport 1.2, I don't have any dock nor I need to connect more than 1 monitor and would be satisfied just having one interface. ProblemType: Crash DistroRelease: Ubuntu 17.10 Package: gnome-shell 3.26.1-0ubuntu4 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 CrashCounter: 1 CurrentDesktop: GNOME-Greeter:GNOME Date: Wed Oct 25 11:46:16 2017 DisplayManager: gdm3 ExecutablePath: /usr/bin/gnome-shell GsettingsChanges: InstallationDate: Installed on 2017-10-19 (5 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) ProcCmdline: /usr/bin/gnome-shell Signal: 5 SourcePackage: gnome-shell StacktraceTop: ?? () from /usr/lib/x86_64-linux-gnu/libmutter-1.so.0 _XIOError () from /usr/lib/x86_64-linux-gnu/libX11.so.6 _XEventsQueued () from /usr/lib/x86_64-linux-gnu/libX11.so.6 XPending () from /usr/lib/x86_64-linux-gnu/libX11.so.6 ?? () from /usr/lib/x86_64-linux-gnu/libgdk-3.so.0 Title: gnome-shell crashed with signal 5 in _XIOError() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1727320/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1674057] Re: [needs packaging] upgrade libzip to version 1.20
** Also affects: libzip (Ubuntu Bionic) Importance: Wishlist Assignee: Stephen Hope (stevehope) Status: In Progress -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libzip in Ubuntu. https://bugs.launchpad.net/bugs/1674057 Title: [needs packaging] upgrade libzip to version 1.20 Status in libzip package in Ubuntu: In Progress Status in libzip source package in Bionic: In Progress Bug description: Please consider upgrading libzip to the newest version (currently 1.20). It comes with important changes (details here: https://nih.at/libzip/NEWS.html) and also it's used by ark since commit ee74c157daf3604277ffcf10d2a89b2b59556dd7: Add libzip plugin A new plugin for libzip was added. The plugin is only built if libzip 1.20 or higher is installed, but is the preferred plugin for zip archives. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libzip/+bug/1674057/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1729728] Re: window picker is broken in 3.26
** Description changed: - WindowPicker seems to be broken in 3.26. + [Impact] + One of the applets shipped in gnome-applets package is broken. It crashes on startup because of missing GSettings schema file. - It just crashes upon applet addition on fresh 17.10. + [Test Case] + * Log into GNOME Flashback session. + * Try to add the “Window picker” applet to the panel. + + Expected result: panel does not crash, applet is added. + + [Proposed Fix] + The proposed fix just makes the gsettings schema installed: + + https://git.gnome.org/browse/gnome-applets/commit/?id=6aedbc3a6af54190 + + [Regression Potential] + None, as the fix just adds a missing file. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-applets in Ubuntu. https://bugs.launchpad.net/bugs/1729728 Title: window picker is broken in 3.26 Status in gnome-applets package in Ubuntu: Fix Released Status in gnome-applets source package in Artful: Confirmed Bug description: [Impact] One of the applets shipped in gnome-applets package is broken. It crashes on startup because of missing GSettings schema file. [Test Case] * Log into GNOME Flashback session. * Try to add the “Window picker” applet to the panel. Expected result: panel does not crash, applet is added. [Proposed Fix] The proposed fix just makes the gsettings schema installed: https://git.gnome.org/browse/gnome-applets/commit/?id=6aedbc3a6af54190 [Regression Potential] None, as the fix just adds a missing file. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-applets/+bug/1729728/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1674057] Re: [needs packaging] upgrade libzip to version 1.20
The version shipping with ubuntu is prehistoric. It would be really nice if the library is updated in upcoming 18.04 otherwise the LTS and all components relying on libzip e.g PHP will ship with this version for the next 5 years. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libzip in Ubuntu. https://bugs.launchpad.net/bugs/1674057 Title: [needs packaging] upgrade libzip to version 1.20 Status in libzip package in Ubuntu: In Progress Bug description: Please consider upgrading libzip to the newest version (currently 1.20). It comes with important changes (details here: https://nih.at/libzip/NEWS.html) and also it's used by ark since commit ee74c157daf3604277ffcf10d2a89b2b59556dd7: Add libzip plugin A new plugin for libzip was added. The plugin is only built if libzip 1.20 or higher is installed, but is the preferred plugin for zip archives. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libzip/+bug/1674057/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741428] Re: Upstream version 52.5.2 fixing high-risk bugs not yet available in Ubuntu-repositories
** Tags added: upgrade-software-version -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/1741428 Title: Upstream version 52.5.2 fixing high-risk bugs not yet available in Ubuntu-repositories Status in thunderbird package in Ubuntu: New Bug description: On December 22, 2017 Mozilla released Thunderbird 52.5.2, fixing five security issues: https://www.mozilla.org/en-US/security/advisories/mfsa2017-30/ The most severe of these bugs only affects Windows. However, the update also addresses two issues categorized as “high”, one “moderate”, and another one “low” risk, which seem to affect all platforms including Linux. Almost two weeks later, there is still no sign of this update arriving in the Ubuntu repositories. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/1741428/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1576559] Re: Refused to switch profile to headset_head_unit: Not connected
Btw, I experience this issue with Ubuntu 17.10. I tried upgrading pulseaudio to the bionic version but the problem persists. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1576559 Title: Refused to switch profile to headset_head_unit: Not connected Status in pulseaudio package in Ubuntu: Confirmed Bug description: I'm trying to connect a bluetooth-speaker-with-microphone (Mi Bluetooth Speaker) to Ubuntu. It works well as an A2DP sync, but can't use it as a headset with microphone. The device doesn't list in the "Input Devices" by default, and using the sound settings to change the profile of the device to HSP/HFP results in this log message: W: [pulseaudio] module-bluez5-device.c: Refused to switch profile to headset_head_unit: Not connected I'm running Ubuntu 16.04 LTS. I did an upgrade from Ubuntu 15.10. pulseaudio: Installed: 1:8.0-0ubuntu3 bluez: Installed: 5.37-0ubuntu5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1576559/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1576559] Re: Refused to switch profile to headset_head_unit: Not connected
Also, how to find out which Headsets work and which not, before spending the money and finding out they don't. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1576559 Title: Refused to switch profile to headset_head_unit: Not connected Status in pulseaudio package in Ubuntu: Confirmed Bug description: I'm trying to connect a bluetooth-speaker-with-microphone (Mi Bluetooth Speaker) to Ubuntu. It works well as an A2DP sync, but can't use it as a headset with microphone. The device doesn't list in the "Input Devices" by default, and using the sound settings to change the profile of the device to HSP/HFP results in this log message: W: [pulseaudio] module-bluez5-device.c: Refused to switch profile to headset_head_unit: Not connected I'm running Ubuntu 16.04 LTS. I did an upgrade from Ubuntu 15.10. pulseaudio: Installed: 1:8.0-0ubuntu3 bluez: Installed: 5.37-0ubuntu5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1576559/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1576559] Re: Refused to switch profile to headset_head_unit: Not connected
I also spend hours on this issue trying to get a Logitech H800 headset working and finally gave up. It would be at least nice to know what's the problem (pulseaudio ? bluez ? Headset ?) and if it's on the roadmap to fix it. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1576559 Title: Refused to switch profile to headset_head_unit: Not connected Status in pulseaudio package in Ubuntu: Confirmed Bug description: I'm trying to connect a bluetooth-speaker-with-microphone (Mi Bluetooth Speaker) to Ubuntu. It works well as an A2DP sync, but can't use it as a headset with microphone. The device doesn't list in the "Input Devices" by default, and using the sound settings to change the profile of the device to HSP/HFP results in this log message: W: [pulseaudio] module-bluez5-device.c: Refused to switch profile to headset_head_unit: Not connected I'm running Ubuntu 16.04 LTS. I did an upgrade from Ubuntu 15.10. pulseaudio: Installed: 1:8.0-0ubuntu3 bluez: Installed: 5.37-0ubuntu5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1576559/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1734960] Re: Bluetooth headset profile HSP/HFP doesn't work
I think this is a duplicate of https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1576559. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1734960 Title: Bluetooth headset profile HSP/HFP doesn't work Status in blueman package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: My bluetooth headphones Bluedio T2S has a microphone and support HSP/HFP profile, but when i try change sound profile in blueman-manager to HSP/HFP - then i get error "Failed to change profile to headset_head_unit". With profile a2dp headphones work good(clementine, chromium etc..), but I could not get work output headphones in steam games, i listen only silence(i think it's problem of pulseaudio) ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: pulseaudio 1:10.0-1ubuntu2 ProcVersionSignature: Ubuntu 4.10.0-40.44-generic 4.10.17 Uname: Linux 4.10.0-40-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.4-0ubuntu4.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pl7ofit3040 F pulseaudio /dev/snd/controlC1: pl7ofit3040 F pulseaudio CurrentDesktop: MATE Date: Tue Nov 28 19:51:59 2017 InstallationDate: Installed on 2016-06-22 (524 days ago) InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: pulseaudio Symptom: audio Symptom_Card: Bluedio Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pl7ofit3040 F pulseaudio /dev/snd/controlC1: pl7ofit3040 F pulseaudio Symptom_Type: No sound at all Title: [Bluedio, recording] No sound at all UpgradeStatus: Upgraded to zesty on 2017-11-24 (4 days ago) dmi.bios.date: 07/08/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: L2.38 dmi.board.name: AM2NF6G-VSTA dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrL2.38:bd07/08/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnAM2NF6G-VSTA:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2017-11-24T19:23:23.458810 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1734960/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1734960] Re: Bluetooth headset profile HSP/HFP doesn't work
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: pulseaudio (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1734960 Title: Bluetooth headset profile HSP/HFP doesn't work Status in blueman package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: My bluetooth headphones Bluedio T2S has a microphone and support HSP/HFP profile, but when i try change sound profile in blueman-manager to HSP/HFP - then i get error "Failed to change profile to headset_head_unit". With profile a2dp headphones work good(clementine, chromium etc..), but I could not get work output headphones in steam games, i listen only silence(i think it's problem of pulseaudio) ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: pulseaudio 1:10.0-1ubuntu2 ProcVersionSignature: Ubuntu 4.10.0-40.44-generic 4.10.17 Uname: Linux 4.10.0-40-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.4-0ubuntu4.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pl7ofit3040 F pulseaudio /dev/snd/controlC1: pl7ofit3040 F pulseaudio CurrentDesktop: MATE Date: Tue Nov 28 19:51:59 2017 InstallationDate: Installed on 2016-06-22 (524 days ago) InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: pulseaudio Symptom: audio Symptom_Card: Bluedio Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pl7ofit3040 F pulseaudio /dev/snd/controlC1: pl7ofit3040 F pulseaudio Symptom_Type: No sound at all Title: [Bluedio, recording] No sound at all UpgradeStatus: Upgraded to zesty on 2017-11-24 (4 days ago) dmi.bios.date: 07/08/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: L2.38 dmi.board.name: AM2NF6G-VSTA dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrL2.38:bd07/08/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnAM2NF6G-VSTA:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2017-11-24T19:23:23.458810 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1734960/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1737289] Re: Bluetooth profile will not change when selected to enable microphone on headset
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: alsa-driver (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1737289 Title: Bluetooth profile will not change when selected to enable microphone on headset Status in alsa-driver package in Ubuntu: Confirmed Bug description: I have a bluetooth headset that supports a2dp as well as HSP/HFP profiles. The headset launches in a2dp and you can select hsp/hfp but it never changes the profile and activates the microphone ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.13.0-19.22-generic 4.13.13 Uname: Linux 4.13.0-19-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.7-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sbarcomb 2192 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Fri Dec 8 23:15:07 2017 InstallationDate: Installed on 2017-10-19 (50 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_Card: Stephen s Beats Studio Symptom_Type: None of the above Title: [Stephen s Beats Studio, recording] Recording problem UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/26/2013 dmi.bios.vendor: Alienware dmi.bios.version: A11 dmi.board.name: 07JNH0 dmi.board.vendor: Alienware dmi.board.version: A02 dmi.chassis.type: 3 dmi.chassis.vendor: Alienware dmi.chassis.version: 00 dmi.modalias: dmi:bvnAlienware:bvrA11:bd11/26/2013:svnAlienware:pnAurora-R4:pvr00:rvnAlienware:rn07JNH0:rvrA02:cvnAlienware:ct3:cvr00: dmi.product.family: 0 dmi.product.name: Aurora-R4 dmi.product.version: 00 dmi.sys.vendor: Alienware To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1737289/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1737289] Re: Bluetooth profile will not change when selected to enable microphone on headset
I think this is a duplicate of https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1576559. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1737289 Title: Bluetooth profile will not change when selected to enable microphone on headset Status in alsa-driver package in Ubuntu: Confirmed Bug description: I have a bluetooth headset that supports a2dp as well as HSP/HFP profiles. The headset launches in a2dp and you can select hsp/hfp but it never changes the profile and activates the microphone ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.13.0-19.22-generic 4.13.13 Uname: Linux 4.13.0-19-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.7-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sbarcomb 2192 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Fri Dec 8 23:15:07 2017 InstallationDate: Installed on 2017-10-19 (50 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_Card: Stephen s Beats Studio Symptom_Type: None of the above Title: [Stephen s Beats Studio, recording] Recording problem UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/26/2013 dmi.bios.vendor: Alienware dmi.bios.version: A11 dmi.board.name: 07JNH0 dmi.board.vendor: Alienware dmi.board.version: A02 dmi.chassis.type: 3 dmi.chassis.vendor: Alienware dmi.chassis.version: 00 dmi.modalias: dmi:bvnAlienware:bvrA11:bd11/26/2013:svnAlienware:pnAurora-R4:pvr00:rvnAlienware:rn07JNH0:rvrA02:cvnAlienware:ct3:cvr00: dmi.product.family: 0 dmi.product.name: Aurora-R4 dmi.product.version: 00 dmi.sys.vendor: Alienware To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1737289/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1734960] Re: Bluetooth headset profile HSP/HFP doesn't work
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: blueman (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1734960 Title: Bluetooth headset profile HSP/HFP doesn't work Status in blueman package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: My bluetooth headphones Bluedio T2S has a microphone and support HSP/HFP profile, but when i try change sound profile in blueman-manager to HSP/HFP - then i get error "Failed to change profile to headset_head_unit". With profile a2dp headphones work good(clementine, chromium etc..), but I could not get work output headphones in steam games, i listen only silence(i think it's problem of pulseaudio) ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: pulseaudio 1:10.0-1ubuntu2 ProcVersionSignature: Ubuntu 4.10.0-40.44-generic 4.10.17 Uname: Linux 4.10.0-40-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.4-0ubuntu4.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pl7ofit3040 F pulseaudio /dev/snd/controlC1: pl7ofit3040 F pulseaudio CurrentDesktop: MATE Date: Tue Nov 28 19:51:59 2017 InstallationDate: Installed on 2016-06-22 (524 days ago) InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: pulseaudio Symptom: audio Symptom_Card: Bluedio Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pl7ofit3040 F pulseaudio /dev/snd/controlC1: pl7ofit3040 F pulseaudio Symptom_Type: No sound at all Title: [Bluedio, recording] No sound at all UpgradeStatus: Upgraded to zesty on 2017-11-24 (4 days ago) dmi.bios.date: 07/08/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: L2.38 dmi.board.name: AM2NF6G-VSTA dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrL2.38:bd07/08/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnAM2NF6G-VSTA:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.default.pa: 2017-11-24T19:23:23.458810 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1734960/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1733421] Re: bbswitch-dkms 0.8-3ubuntu1: bbswitch kernel module failed to build. Occured at boot
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: bbswitch (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to bbswitch in Ubuntu. https://bugs.launchpad.net/bugs/1733421 Title: bbswitch-dkms 0.8-3ubuntu1: bbswitch kernel module failed to build. Occured at boot Status in bbswitch package in Ubuntu: Confirmed Bug description: I was having issues with plotting with SciLab and rebooted my PC to see whether that would help but that resulted in a series of crashes. ProblemType: Package DistroRelease: Ubuntu 16.04 Package: bbswitch-dkms 0.8-3ubuntu1 Uname: Linux 4.9.0-040900-generic x86_64 NonfreeKernelModules: sep4_0 socperf2_0 pax nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.1-0ubuntu2.12 Architecture: amd64 DKMSKernelVersion: 4.4.0-101-generic Date: Mon Nov 20 18:43:36 2017 InstallationDate: Installed on 2016-12-28 (327 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) PackageVersion: 0.8-3ubuntu1 RelatedPackageVersions: dpkg 1.18.4ubuntu1.2 apt 1.2.24 SourcePackage: bbswitch Title: bbswitch-dkms 0.8-3ubuntu1: bbswitch kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bbswitch/+bug/1733421/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1692316] Re: can't delete printer
Solving: sudo /etc/init.d/cups stop sudo nano -B /etc/cups/printers.conf Remove printer from .conf sudo /etc/init.d/cups start -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1692316 Title: can't delete printer Status in cups package in Ubuntu: Confirmed Bug description: Trying to delete a printer through either system-config-printer or http://localhost:631/printers. Both claim that the printer was deleted, but it doesn't go away. Cups logs: localhost - root [21/May/2017:08:58:17 -0400] "POST /admin/ HTTP/1.1" 200 103 - - localhost - root [21/May/2017:08:58:17 -0400] "POST /admin/ HTTP/1.1" 200 2329 - - localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 126 - - localhost - - [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 401 142 CUPS-Delete-Printer successful-ok localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 142 CUPS-Delete-Printer successful-ok localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 996 CUPS-Add-Modify-Printer successful-ok localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 199 CUPS-Add-Modify-Printer successful-ok localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 2072 - - But again, despite the "CUPS-Delete-Printer-successful-ok", it's not actually deleted. In system-config-printer, when I try this multiple times, I _might_ see the printer briefly disappear from the printer listing, but then it comes back. Other printers I create to test what's going on here, I am able to delete. Just not this one. I will attach my /etc/cups/printers.conf. ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: cups 2.2.2-1ubuntu1 ProcVersionSignature: Ubuntu 4.10.0-20.22-generic 4.10.8 Uname: Linux 4.10.0-20-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.4-0ubuntu4 Architecture: amd64 CurrentDesktop: Unity:Unity7 Date: Sun May 21 08:58:32 2017 InstallationDate: Installed on 2016-01-16 (491 days ago) InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) KernLog: [950067.827005] audit: type=1400 audit(1495370264.565:45): apparmor="DENIED" operation="sendmsg" profile="/usr/bin/evince" name="/run/systemd/journal/socket" pid=18730 comm="evince" requested_mask="w" denied_mask="w" fsuid=1000 ouid=0 Lpstat: device for duplex: socket://m551dn:9100 device for HP-LaserJet-500-color-M551: ipp://m551dn.local:631/ipp/print device for simplex: socket://m551dn:9100 MachineType: Acer Predator G6-710 Papersize: letter PpdFiles: duplex: HP LaserJet 500 color M551 Postscript (recommended) simplex: HP LaserJet 500 color M551 Postscript (recommended) ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.10.0-20-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: cups UpgradeStatus: Upgraded to zesty on 2017-04-14 (36 days ago) dmi.bios.date: 05/18/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: R01-A4 dmi.board.name: Predator G6-710 dmi.board.vendor: Acer dmi.chassis.type: 3 dmi.chassis.vendor: Acer dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrR01-A4:bd05/18/2016:svnAcer:pnPredatorG6-710:pvr:rvnAcer:rnPredatorG6-710:rvr:cvnAcer:ct3:cvr: dmi.product.name: Predator G6-710 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1692316/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1692316] Re: can't delete printer
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: cups (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1692316 Title: can't delete printer Status in cups package in Ubuntu: Confirmed Bug description: Trying to delete a printer through either system-config-printer or http://localhost:631/printers. Both claim that the printer was deleted, but it doesn't go away. Cups logs: localhost - root [21/May/2017:08:58:17 -0400] "POST /admin/ HTTP/1.1" 200 103 - - localhost - root [21/May/2017:08:58:17 -0400] "POST /admin/ HTTP/1.1" 200 2329 - - localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 126 - - localhost - - [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 401 142 CUPS-Delete-Printer successful-ok localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 142 CUPS-Delete-Printer successful-ok localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 996 CUPS-Add-Modify-Printer successful-ok localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 199 CUPS-Add-Modify-Printer successful-ok localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 2072 - - But again, despite the "CUPS-Delete-Printer-successful-ok", it's not actually deleted. In system-config-printer, when I try this multiple times, I _might_ see the printer briefly disappear from the printer listing, but then it comes back. Other printers I create to test what's going on here, I am able to delete. Just not this one. I will attach my /etc/cups/printers.conf. ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: cups 2.2.2-1ubuntu1 ProcVersionSignature: Ubuntu 4.10.0-20.22-generic 4.10.8 Uname: Linux 4.10.0-20-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.4-0ubuntu4 Architecture: amd64 CurrentDesktop: Unity:Unity7 Date: Sun May 21 08:58:32 2017 InstallationDate: Installed on 2016-01-16 (491 days ago) InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) KernLog: [950067.827005] audit: type=1400 audit(1495370264.565:45): apparmor="DENIED" operation="sendmsg" profile="/usr/bin/evince" name="/run/systemd/journal/socket" pid=18730 comm="evince" requested_mask="w" denied_mask="w" fsuid=1000 ouid=0 Lpstat: device for duplex: socket://m551dn:9100 device for HP-LaserJet-500-color-M551: ipp://m551dn.local:631/ipp/print device for simplex: socket://m551dn:9100 MachineType: Acer Predator G6-710 Papersize: letter PpdFiles: duplex: HP LaserJet 500 color M551 Postscript (recommended) simplex: HP LaserJet 500 color M551 Postscript (recommended) ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.10.0-20-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: cups UpgradeStatus: Upgraded to zesty on 2017-04-14 (36 days ago) dmi.bios.date: 05/18/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: R01-A4 dmi.board.name: Predator G6-710 dmi.board.vendor: Acer dmi.chassis.type: 3 dmi.chassis.vendor: Acer dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrR01-A4:bd05/18/2016:svnAcer:pnPredatorG6-710:pvr:rvnAcer:rnPredatorG6-710:rvr:cvnAcer:ct3:cvr: dmi.product.name: Predator G6-710 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1692316/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1735363] Re: inkscape: Port to Python 3
@Hachmann - Thanks for the gitlab link to su_v's work. Do you know what the status of the fork is? Is there a wiki page/bug report tracking the migration? It would be good to get this merged as soon as possible, as the fork is 6 months behind master. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to inkscape in Ubuntu. https://bugs.launchpad.net/bugs/1735363 Title: inkscape: Port to Python 3 Status in Inkscape: Triaged Status in inkscape package in Ubuntu: New Status in inkscape package in Debian: Confirmed Bug description: inkscape: Use/Port of Python3 needed, or considering demotion. Currently seeded in usb (???), owned by desktop-packages. To manage notifications about this bug go to: https://bugs.launchpad.net/inkscape/+bug/1735363/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1735363] Re: inkscape: Port to Python 3
** Changed in: inkscape Importance: Undecided => Medium ** Changed in: inkscape Status: New => Triaged -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to inkscape in Ubuntu. https://bugs.launchpad.net/bugs/1735363 Title: inkscape: Port to Python 3 Status in Inkscape: Triaged Status in inkscape package in Ubuntu: New Status in inkscape package in Debian: Confirmed Bug description: inkscape: Use/Port of Python3 needed, or considering demotion. Currently seeded in usb (???), owned by desktop-packages. To manage notifications about this bug go to: https://bugs.launchpad.net/inkscape/+bug/1735363/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1726224] Re: wacom invisible mouse pointer in wayland
Just to add some information on this on the cursor disappearance topic. If I hit the "windows" button the one that open the application/windows browsing of gnome shell and I move the stylus on the tablet the pointer is there. Same thing if I Alt+Tab. But I soon as I leave one or the other, cursor is not there and the only quickfix yet is unplugging and plugging back the tablet as suggested before. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1726224 Title: wacom invisible mouse pointer in wayland Status in GNOME Shell: Confirmed Status in gnome-shell package in Ubuntu: Triaged Status in xorg-server package in Ubuntu: Confirmed Bug description: After upgrading to Ubuntu 17.10, I connected my Wacom Intuos tablet, which has touch and pen functionality. Controlling the mouse pointer through the touch functionality seems to work fine, but using the stylus produced very strange behaviour, depending the program. - With Firefox there there are two pointers - one that is moving in accordance with the stylus movements, and one stays put at the position, when the stylus movement was detected. - With Darktable the mouse pointer becomes invisible, once it's moved inside of the application window (it registers clicks though). Once the pointer is moved outside of the application window, it appears again. I'm running Ubuntu inside of a wayland session. libwacom2: 0.24-1 To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1726224/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1729728] Re: window picker is broken in 3.26
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: gnome-applets (Ubuntu Artful) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-applets in Ubuntu. https://bugs.launchpad.net/bugs/1729728 Title: window picker is broken in 3.26 Status in gnome-applets package in Ubuntu: Fix Released Status in gnome-applets source package in Artful: Confirmed Bug description: WindowPicker seems to be broken in 3.26. It just crashes upon applet addition on fresh 17.10. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-applets/+bug/1729728/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741481] [NEW] package network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3 failed to install/upgrade: le sous-processus script post-installation installé a retourné une e
Public bug reported: when i try to update ProblemType: Package DistroRelease: Ubuntu 17.10 Package: network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 Date: Fri Jan 5 14:09:58 2018 ErrorMessage: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 InstallationDate: Installed on 2018-01-05 (0 days ago) InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Release amd64 (20171017.1) IpRoute: default via 192.168.109.1 dev enp1s0 proto dhcp src 192.168.109.111 metric 100 192.168.109.0/24 dev enp1s0 proto kernel scope link src 192.168.109.111 192.168.109.1 dev enp1s0 proto dhcp scope link src 192.168.109.111 metric 100 IwConfig: lono wireless extensions. enp1s0no wireless extensions. PackageArchitecture: all Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 3.6.3-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 2.7.14-2ubuntu1 RelatedPackageVersions: dpkg 1.18.24ubuntu1 apt 1.5.1 RfKill: SourcePackage: network-manager Title: package network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Error: command ['nmcli', '-f', 'all', 'con'] failed with exit code 8: Error: NetworkManager is not running. nmcli-dev: Error: command ['nmcli', '-f', 'all', 'dev'] failed with exit code 8: Error: NetworkManager is not running. nmcli-nm: Error: command ['nmcli', '-f', 'all', 'gen'] failed with exit code 8: Error: NetworkManager is not running. ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package artful -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1741481 Title: package network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 Status in network-manager package in Ubuntu: New Bug description: when i try to update ProblemType: Package DistroRelease: Ubuntu 17.10 Package: network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 Date: Fri Jan 5 14:09:58 2018 ErrorMessage: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 InstallationDate: Installed on 2018-01-05 (0 days ago) InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Release amd64 (20171017.1) IpRoute: default via 192.168.109.1 dev enp1s0 proto dhcp src 192.168.109.111 metric 100 192.168.109.0/24 dev enp1s0 proto kernel scope link src 192.168.109.111 192.168.109.1 dev enp1s0 proto dhcp scope link src 192.168.109.111 metric 100 IwConfig: lono wireless extensions. enp1s0no wireless extensions. PackageArchitecture: all Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 3.6.3-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 2.7.14-2ubuntu1 RelatedPackageVersions: dpkg 1.18.24ubuntu1 apt 1.5.1 RfKill: SourcePackage: network-manager Title: package network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: Error: command ['nmcli', '-f', 'all', 'con'] failed with exit code 8: Error: NetworkManager is not running. nmcli-dev: Error: command ['nmcli', '-f', 'all', 'dev'] failed with exit code 8: Error: NetworkManager is not running. nmcli-nm: Error: command ['nmcli', '-f', 'all', 'gen'] failed with exit code 8: Error: NetworkManager is not running. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1741481/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741468] Re: Broken GUI in Ubuntu MATE Live Session
This bug has been reported on the Ubuntu ISO testing tracker. A list of all reports related to this bug can be found here: http://iso.qa.ubuntu.com/qatracker/reports/bugs/1741468 ** Tags added: iso-testing -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1741468 Title: Broken GUI in Ubuntu MATE Live Session Status in xorg package in Ubuntu: New Bug description: Device: MacBook Air, late 2013 -The toolbar on the top and the bottom loads, but they seem to be images only. -I cannot click on the Applications, Places, System, Firefox, or MATE Welcome, nor the power button on the top bar. -The Bottom bar's show desktop and switch desktop does not click either. -My cursor shows and tracks, but it does not seem to register clicks. This is both with a mouse and a trackpad. -Background image is black. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1741468/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1726224] Re: wacom invisible mouse pointer in wayland
Hello, Here to confirm cursor disappearance and system freeze. I have a Wacom Intuos Comic Small. Also buttons are not properly detected I have some mismatching in there (between what is shown in the settings and the one actually pressed on the tablet). Funny thing is, mismatched is not the same on Wayland and Xorg Also, on Xorg the touch detection (right click/scrolling) is really awful while it works pretty well on Wayland... -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1726224 Title: wacom invisible mouse pointer in wayland Status in GNOME Shell: Confirmed Status in gnome-shell package in Ubuntu: Triaged Status in xorg-server package in Ubuntu: Confirmed Bug description: After upgrading to Ubuntu 17.10, I connected my Wacom Intuos tablet, which has touch and pen functionality. Controlling the mouse pointer through the touch functionality seems to work fine, but using the stylus produced very strange behaviour, depending the program. - With Firefox there there are two pointers - one that is moving in accordance with the stylus movements, and one stays put at the position, when the stylus movement was detected. - With Darktable the mouse pointer becomes invisible, once it's moved inside of the application window (it registers clicks though). Once the pointer is moved outside of the application window, it appears again. I'm running Ubuntu inside of a wayland session. libwacom2: 0.24-1 To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1726224/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741468] [NEW] Broken GUI in Ubuntu MATE Live Session
Public bug reported: Device: MacBook Air, late 2013 -The toolbar on the top and the bottom loads, but they seem to be images only. -I cannot click on the Applications, Places, System, Firefox, or MATE Welcome, nor the power button on the top bar. -The Bottom bar's show desktop and switch desktop does not click either. -My cursor shows and tracks, but it does not seem to register clicks. This is both with a mouse and a trackpad. -Background image is black. ** Affects: xorg (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1741468 Title: Broken GUI in Ubuntu MATE Live Session Status in xorg package in Ubuntu: New Bug description: Device: MacBook Air, late 2013 -The toolbar on the top and the bottom loads, but they seem to be images only. -I cannot click on the Applications, Places, System, Firefox, or MATE Welcome, nor the power button on the top bar. -The Bottom bar's show desktop and switch desktop does not click either. -My cursor shows and tracks, but it does not seem to register clicks. This is both with a mouse and a trackpad. -Background image is black. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1741468/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1726112] Re: akonadi-backend-postgresql missing in 17.10
Any activity on this? The package is also missing in akonadi (4:17.08.3-0ubuntu2) bionic -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to akonadi in Ubuntu. https://bugs.launchpad.net/bugs/1726112 Title: akonadi-backend-postgresql missing in 17.10 Status in akonadi package in Ubuntu: New Bug description: Package missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/akonadi/+bug/1726112/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1491073] Re: Invalid data message while opening a file
+1, I am also affected. Ubuntu 17.10, Transmission 2.92 (14714) Message says torrent is invalid, but the add torrent screen appears anyway, and the torrent downloads fine. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to transmission in Ubuntu. https://bugs.launchpad.net/bugs/1491073 Title: Invalid data message while opening a file Status in transmission package in Ubuntu: Fix Released Bug description: When I open any file in Transmission I get message that file contain invalid data, but I can open torrent file anyway when I close the message. I think that this is a bug because this happen to every file I open. transmission-gtk 2.84 (14307) Xubuntu 13.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/transmission/+bug/1491073/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1616332] Re: gnome-software using hundreds of MB of memory when not in use
I'm also affected by this bug. Sometimes it starts consuming memory (I have 8GB, usually 6GB free) and devours swap as well. Only solution then is to do a hard restart, which can be problematic if I have a simulation running. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-software in Ubuntu. https://bugs.launchpad.net/bugs/1616332 Title: gnome-software using hundreds of MB of memory when not in use Status in gnome-software package in Ubuntu: Triaged Bug description: It seems gnome-software is running in the background all the time. Not a big deal if it was lightweight, but it seems to use hundreds of MB (from smem output): PID User Command Swap USS PSS RSS 2291 jan /usr/bin/gnome-software --g 285436 112576 117982 134036 A total of over 400MB in RAM and swap combined. After killing and restarting, it takes "only" a bit over 100MB. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: gnome-software 3.20.1+git20160617.1.0440874.ubuntu-xenial-0ubuntu1~16.04.1 ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Wed Aug 24 09:45:53 2016 InstallationDate: Installed on 2012-11-10 (1382 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) SourcePackage: gnome-software UpgradeStatus: Upgraded to xenial on 2016-06-19 (65 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1616332/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1727765] Re: Please upgrade to 5.4 (Using Ubuntu 17.10)
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: mono (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mono in Ubuntu. https://bugs.launchpad.net/bugs/1727765 Title: Please upgrade to 5.4 (Using Ubuntu 17.10) Status in mono package in Ubuntu: Confirmed Bug description: Please upgrade to 5.4 (Using Ubuntu 17.10) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mono/+bug/1727765/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741459] [NEW] package firefox 51.0.1+build2-0ubuntu0.16.04.2 [modified: usr/lib/firefox/browser/blocklist.xml usr/lib/firefox/browser/chrome.manifest usr/lib/firefox/browser/f
Public bug reported: Current version of firefox is also not launching ProblemType: Package DistroRelease: Ubuntu 16.04 ProcVersionSignature: Ubuntu 4.4.0-72.93-generic 4.4.49 Uname: Linux 4.4.0-72-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.1-0ubuntu2.5 AptOrdering: firefox: Purge NULL: ConfigurePending Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: montu 1924 F pulseaudio /dev/snd/controlC0: montu 1924 F pulseaudio BuildID: 20170201180315 Channel: Unavailable Date: Fri Jan 5 16:35:39 2018 DpkgHistoryLog: Start-Date: 2018-01-05 16:35:39 Commandline: apt-get purge firefox Requested-By: montu (1000) Purge: firefox:amd64 (51.0.1+build2-0ubuntu0.16.04.2) DpkgTerminalLog: dpkg: error processing package firefox (--purge): package is in a very bad inconsistent state; you should reinstall it before attempting a removal ErrorMessage: package is in a very bad inconsistent state; you should reinstall it before attempting a removal ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2017-02-14 (324 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) IpRoute: default via 192.168.43.1 dev wlp8s0 proto static metric 600 10.0.6.0/24 dev anboxbr0 proto kernel scope link src 10.0.6.1 linkdown 169.254.0.0/16 dev anboxbr0 scope link metric 1000 linkdown 192.168.43.0/24 dev wlp8s0 proto kernel scope link src 192.168.43.152 metric 600 NoProfiles: True PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: dpkg 1.18.4ubuntu1.1 apt 1.2.19 RunningIncompatibleAddons: False SourcePackage: firefox UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/12/2015 dmi.bios.vendor: LENOVO dmi.bios.version: 9ECN43WW(V3.03) dmi.board.asset.tag: NO DPK dmi.board.name: Lenovo Y50-70 dmi.board.vendor: LENOVO dmi.board.version: NO DPK dmi.chassis.asset.tag: NO DPK dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo Y50-70 dmi.modalias: dmi:bvnLENOVO:bvr9ECN43WW(V3.03):bd08/12/2015:svnLENOVO:pn20378:pvrLenovoY50-70:rvnLENOVO:rnLenovoY50-70:rvrNODPK:cvnLENOVO:ct10:cvrLenovoY50-70: dmi.product.name: 20378 dmi.product.version: Lenovo Y50-70 dmi.sys.vendor: LENOVO ** Affects: firefox (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1741459 Title: package firefox 51.0.1+build2-0ubuntu0.16.04.2 [modified: usr/lib/firefox/browser/blocklist.xml usr/lib/firefox/browser/chrome.manifest usr/lib/firefox/browser/features/aushel...@mozilla.org.xpi usr/lib/firefox/browser/features/e10sroll...@mozilla.org.xpi usr/lib/firefox/browser/features/fire...@getpocket.com.xpi usr/lib/firefox/browser/features/webcom...@mozilla.org.xpi usr/lib/firefox/browser/omni.ja usr/lib/firefox/crashreporter usr/lib/firefox/dependentlibs.list usr/lib/firefox/firefox usr/lib/firefox/gmp-clearkey/0.1/libclearkey.so usr/lib/firefox/gtk2/libmozgtk.so usr/lib/firefox/libfreeblpriv3.chk usr/lib/firefox/libfreeblpriv3.so usr/lib/firefox/libmozavutil.so usr/lib/firefox/libmozgtk.so usr/lib/firefox/libmozsqlite3.so usr/lib/firefox/libnspr4.so usr/lib/firefox/libnssckbi.so usr/lib/firefox/libnssdbm3.chk usr/lib/firefox/libnssutil3.so usr/lib/firefox/libplds4.so usr/lib/firefox/libsoftokn3.chk usr/lib/firefox/libsoftokn3.so usr/lib/firefox/libxul.so usr/lib/firefox/omni.ja usr/lib/firefox/plugin-container usr/share/doc/firefox/changelog.Debian.gz] failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting a removal Status in firefox package in Ubuntu: New Bug description: Current version of firefox is also not launching ProblemType: Package DistroRelease: Ubuntu 16.04 ProcVersionSignature: Ubuntu 4.4.0-72.93-generic 4.4.49 Uname: Linux 4.4.0-72-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.1-0ubuntu2.5 AptOrdering: firefox: Purge NULL: ConfigurePending Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: montu 1924 F pulseaudio /dev/snd/controlC0: montu 1924 F pulseaudio BuildID: 20170201180315 Channel: Unavailable Date: Fri Jan 5 16:35:39 2018 DpkgHistoryLog: Start-Date: 2018-01-05 16:35:39 Commandline: apt-get purge firefox Requested-By: montu (1000) Purge: firefox:amd64 (51.0.1+build2-0ubuntu0.16.04.2) DpkgTerminalLog: dpkg: error processing package firefox (--purge): package is in a very bad inco
[Desktop-packages] [Bug 1739625] Re: Mouse events pass through pure Wayland windows
OK, I have a fix on the way upstream: https://bugzilla.gnome.org/show_bug.cgi?id=790309 We'll try to get it into Ubuntu ASAP. ** No longer affects: gnome-shell (Ubuntu) ** Tags added: wayland ** Summary changed: - Mouse events pass through pure Wayland windows + Mouse events pass through pure Wayland windows (that use wl_shell) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1739625 Title: Mouse events pass through pure Wayland windows (that use wl_shell) Status in Mutter: Confirmed Status in mutter package in Ubuntu: In Progress Bug description: * When I run 'mpv', the video player, and I click on the main window with my mouse, the click goes through and select whatever window was behind. * The same thing happens if I build a SDL tutorial and start it with SDL_VIDEODRIVER=wayland. * The same thing happens if I build this Wayland tutorial: https://github.com/hdante/hello_wayland * The same thing with Jan Newmarch's Wayland tutorial examples. These different cases lead me to believe that the problem lies in Gnome Wayland compositor and not in these programs. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: gnome-shell 3.26.2-0ubuntu0.1 ProcVersionSignature: Ubuntu 4.13.0-19.22-generic 4.13.13 Uname: Linux 4.13.0-19-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.6 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Dec 21 15:47:50 2017 DisplayManager: gdm3 InstallationDate: Installed on 2017-10-02 (79 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Alpha amd64 (20170926) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/mutter/+bug/1739625/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1739625] Re: Mouse events pass through pure Wayland windows
** Changed in: mutter Status: Unknown => Confirmed ** Changed in: mutter Importance: Unknown => Medium -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1739625 Title: Mouse events pass through pure Wayland windows Status in Mutter: Confirmed Status in gnome-shell package in Ubuntu: In Progress Status in mutter package in Ubuntu: In Progress Bug description: * When I run 'mpv', the video player, and I click on the main window with my mouse, the click goes through and select whatever window was behind. * The same thing happens if I build a SDL tutorial and start it with SDL_VIDEODRIVER=wayland. * The same thing happens if I build this Wayland tutorial: https://github.com/hdante/hello_wayland * The same thing with Jan Newmarch's Wayland tutorial examples. These different cases lead me to believe that the problem lies in Gnome Wayland compositor and not in these programs. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: gnome-shell 3.26.2-0ubuntu0.1 ProcVersionSignature: Ubuntu 4.13.0-19.22-generic 4.13.13 Uname: Linux 4.13.0-19-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.6 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Dec 21 15:47:50 2017 DisplayManager: gdm3 InstallationDate: Installed on 2017-10-02 (79 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Alpha amd64 (20170926) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/mutter/+bug/1739625/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741428] [NEW] Upstream version 52.5.2 fixing high-risk bugs not yet available in Ubuntu-repositories
*** This bug is a security vulnerability *** Public security bug reported: On December 22, 2017 Mozilla released Thunderbird 52.5.2, fixing five security issues: https://www.mozilla.org/en-US/security/advisories/mfsa2017-30/ The most severe of these bugs only affects Windows. However, the update also addresses two issues categorized as “high”, one “moderate”, and another one “low” risk, which seem to affect all platforms including Linux. Almost two weeks later, there is still no sign of this update arriving in the Ubuntu repositories. ** Affects: thunderbird (Ubuntu) Importance: Undecided Status: New ** Information type changed from Private Security to Public Security -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/1741428 Title: Upstream version 52.5.2 fixing high-risk bugs not yet available in Ubuntu-repositories Status in thunderbird package in Ubuntu: New Bug description: On December 22, 2017 Mozilla released Thunderbird 52.5.2, fixing five security issues: https://www.mozilla.org/en-US/security/advisories/mfsa2017-30/ The most severe of these bugs only affects Windows. However, the update also addresses two issues categorized as “high”, one “moderate”, and another one “low” risk, which seem to affect all platforms including Linux. Almost two weeks later, there is still no sign of this update arriving in the Ubuntu repositories. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/1741428/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1697450] Re: Gnome Shell hangs at startup
OK, sounds very likely to be a kernel bug, triggered by GPU usage upon login. ** Summary changed: - Gnome Shell hangs at startup + Whole machine freezes at startup using kernels after 4.8 ** Changed in: linux (Ubuntu) Status: Incomplete => New ** Changed in: gdm3 (Ubuntu) Status: Incomplete => Invalid ** No longer affects: gdm3 (Ubuntu) ** No longer affects: gnome-shell (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1697450 Title: Whole machine freezes at startup using kernels after 4.8 Status in linux package in Ubuntu: Incomplete Bug description: I'm trying to install from the daily Artful desktop image (20170612). After boot, the gnome session hangs at startup, while the "zoom" animation is being shown. I have an intel card: 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 29 Memory at f780 (64-bit, non-prefetchable) [size=4M] Memory at e000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c [disabled] [size=128K] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features Kernel driver in use: i915 Kernel modules: i915 I'm not sure how to debug this further, but I had similar issues with the installer from Zesty as well (see https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1681846) With Artful, at least it gets past the splash screen but then it hangs. Note that the system is currently running Yakkety with no issue. --- ApportVersion: 2.20.7-0ubuntu2 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 17.10 InstallationDate: Installed on 2017-07-30 (71 days ago) InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Alpha amd64 (20170730) NonfreeKernelModules: zfs zunicode zcommon znvpair zavl Package: linux PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 4.8.0-59.64-generic 4.8.17 Tags: artful wayland-session Uname: Linux 4.8.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1697450/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1697450] Re: Gnome Shell hangs at startup
@Daniel no, the whole system freezes, even if I ssh before the UI starts (which requires exact timing), then the machine freezes. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1697450 Title: Gnome Shell hangs at startup Status in gdm3 package in Ubuntu: Incomplete Status in gnome-shell package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: I'm trying to install from the daily Artful desktop image (20170612). After boot, the gnome session hangs at startup, while the "zoom" animation is being shown. I have an intel card: 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 29 Memory at f780 (64-bit, non-prefetchable) [size=4M] Memory at e000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c [disabled] [size=128K] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features Kernel driver in use: i915 Kernel modules: i915 I'm not sure how to debug this further, but I had similar issues with the installer from Zesty as well (see https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1681846) With Artful, at least it gets past the splash screen but then it hangs. Note that the system is currently running Yakkety with no issue. --- ApportVersion: 2.20.7-0ubuntu2 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 17.10 InstallationDate: Installed on 2017-07-30 (71 days ago) InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Alpha amd64 (20170730) NonfreeKernelModules: zfs zunicode zcommon znvpair zavl Package: linux PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 4.8.0-59.64-generic 4.8.17 Tags: artful wayland-session Uname: Linux 4.8.0-59-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirt lpadmin lxd plugdev sambashare sudo _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1697450/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1638983] Re: Boot splash with luks password prompt broken after nvidia upgrade to 367
Ubuntu 17.10 and nvidia-387, still a problem. Actually, it got even worse. On a freshly installed system, fully updated via apt dist-upgrade: When I edit the boot options and remove "quiet splash", the screen just goes black. The only way to boot the system, is to go into rescue mode and continue normal boot. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-367 in Ubuntu. https://bugs.launchpad.net/bugs/1638983 Title: Boot splash with luks password prompt broken after nvidia upgrade to 367 Status in nvidia-graphics-drivers-367 package in Ubuntu: Confirmed Bug description: Just got the nvidia driver update from 361 to 367. Upon reboot, the boot splash (plymouth?) with the password prompt for the encrypted root is missing. The screen flashes dark purple and the switches to black with a blinking cursor echoing anything typed. Ctrl-alt-del reboots. Booting with kernel options "quiet splash" removed results in a text-mode boot process where the password prompt is present, proceeding normally. Wasn't sure if this was plymouth or nvidia issue, I'm guessing nvidia because that's what upgraded and broke functionality. Tried redoing update-grub and update-initramfs, didn't help. Found I had both nvidia-361 and nvidia-367 installed (why didn't -361 uninstall?), but manually removing -361 (and redoing initramfs just in case) didn't change anything. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: nvidia-367 367.57-0ubuntu0.16.04.1 ProcVersionSignature: Ubuntu 4.4.0-36.55-generic 4.4.16 Uname: Linux 4.4.0-36-generic x86_64 NonfreeKernelModules: zfs zunicode zcommon znvpair zavl nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Thu Nov 3 17:45:14 2016 InstallationDate: Installed on 2016-07-23 (103 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) SourcePackage: nvidia-graphics-drivers-367 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-367/+bug/1638983/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1741418] [NEW] package cups-browsed 1.8.3-2ubuntu3.1 failed to install/upgrade: η υποδιεργασία installed post-installation script επέστρεψε κατάσταση λάθους 1
Public bug reported: i don't know ProblemType: Package DistroRelease: Ubuntu 16.04 Package: cups-browsed 1.8.3-2ubuntu3.1 ProcVersionSignature: Ubuntu 4.4.0-104.127-generic 4.4.98 Uname: Linux 4.4.0-104-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.15 Architecture: amd64 CupsErrorLog: E [04/Jan/2018:19:17:02 +0200] HP-DeskJet-4670-series: File \"/usr/lib/cups/filter/hpcups\" not available: No such file or directory E [04/Jan/2018:19:17:02 +0200] HP-DeskJet-4670-series: File \"/usr/lib/cups/filter/hpcups\" not available: No such file or directory E [05/Jan/2018:09:58:56 +0200] HP-DeskJet-4670-series: File \"/usr/lib/cups/filter/hpcups\" not available: No such file or directory E [05/Jan/2018:09:58:56 +0200] HP-DeskJet-4670-series: File \"/usr/lib/cups/filter/hpcups\" not available: No such file or directory Date: Wed Jan 3 13:30:02 2018 ErrorMessage: η υποδιεργασία installed post-installation script επέστρεψε κατάσταση λάθους 1 InstallationDate: Installed on 2017-01-03 (366 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) Lpstat: device for EPSON-AL-CX16NF: dnssd://EPSON%20AL-CX16NF-5FD934._pdl-datastream._tcp.local/ device for HP-DeskJet-4670-series: dnssd://HP%20DeskJet%204670%20series%20%5B22083D%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-f430b922083d device for OKI-DATA-CORP-C301: dnssd://OKI-C301-ACD8ED._pdl-datastream._tcp.local/ MachineType: LENOVO 42334AG Papersize: a4 PpdFiles: OKI-DATA-CORP-C301: Oki C301dn Foomatic/foo2hiperc (recommended) HP-DeskJet-4670-series: HP Deskjet 4670 Series, hpcups 3.16.3 EPSON-AL-CX16NF: KONICA MINOLTA magicolor 1600W Foomatic/foo2lava (recommended) ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-104-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: dpkg 1.18.4ubuntu1.3 apt 1.2.24 SourcePackage: cups-filters Title: package cups-browsed 1.8.3-2ubuntu3.1 failed to install/upgrade: η υποδιεργασία installed post-installation script επέστρεψε κατάσταση λάθους 1 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/22/2009 dmi.bios.vendor: LENOVO dmi.bios.version: 6GET18WW(V1.09) dmi.board.name: KIWDX dmi.board.vendor: LENOVO dmi.board.version: REFERENCE dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnLENOVO:bvr6GET18WW(V1.09):bd05/22/2009:svnLENOVO:pn42334AG:pvrLenovo3000N500:rvnLENOVO:rnKIWDX:rvrREFERENCE:cvnNoEnclosure:ct10:cvrN/A: dmi.product.name: 42334AG dmi.product.version: Lenovo 3000 N500 dmi.sys.vendor: LENOVO ** Affects: cups-filters (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups-filters in Ubuntu. https://bugs.launchpad.net/bugs/1741418 Title: package cups-browsed 1.8.3-2ubuntu3.1 failed to install/upgrade: η υποδιεργασία installed post-installation script επέστρεψε κατάσταση λάθους 1 Status in cups-filters package in Ubuntu: New Bug description: i don't know ProblemType: Package DistroRelease: Ubuntu 16.04 Package: cups-browsed 1.8.3-2ubuntu3.1 ProcVersionSignature: Ubuntu 4.4.0-104.127-generic 4.4.98 Uname: Linux 4.4.0-104-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.15 Architecture: amd64 CupsErrorLog: E [04/Jan/2018:19:17:02 +0200] HP-DeskJet-4670-series: File \"/usr/lib/cups/filter/hpcups\" not available: No such file or directory E [04/Jan/2018:19:17:02 +0200] HP-DeskJet-4670-series: File \"/usr/lib/cups/filter/hpcups\" not available: No such file or directory E [05/Jan/2018:09:58:56 +0200] HP-DeskJet-4670-series: File \"/usr/lib/cups/filter/hpcups\" not available: No such file or directory E [05/Jan/2018:09:58:56 +0200] HP-DeskJet-4670-series: File \"/usr/lib/cups/filter/hpcups\" not available: No such file or directory Date: Wed Jan 3 13:30:02 2018 ErrorMessage: η υποδιεργασία installed post-installation script επέστρεψε κατάσταση λάθους 1 InstallationDate: Installed on 2017-01-03 (366 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) Lpstat: device for EPSON-AL-CX16NF: dnssd://EPSON%20AL-CX16NF-5FD934._pdl-datastream._tcp.local/ device for HP-DeskJet-4670-series: dnssd://HP%20DeskJet%204670%20series%20%5B22083D%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-f430b922083d device for OKI-DATA-CORP-C301: dnssd://OKI-C301-ACD8ED._pdl-datastream._tcp.local/ MachineType: LENOVO 42334AG Papersize: a4 PpdFiles: OKI-DATA-CORP-C301: Oki C301dn Foomatic/foo2hiperc (recommended) HP-DeskJet-4670-series: HP Deskjet 4670 Series, hpcups 3.16.3 EPSON-AL-CX16NF: KONICA MINOLTA magicolor 1600W Foomatic/foo2lava (recommended) ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-104-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPack