I get it as well, Ubuntu 12.04 64 bit, with 3.5.5 and latterly 3.5.6.
It was OK at some point in the past 6 months or so, but I can't confirm
which release that was.
It's quite irritating.
I have a laptop running Mint Debian 32 bit and that's still OK on 3.5.6.
I think #52397 has been raised
I was on 12.04 and had the report builder installed. I upgraded to
12.10 yesterday and am horrified to find I no longer have my Base
reports.Do I really have to spend another 2 days rebuilding my
system yet again on 12.04 just to have this?
Is there any way at all I can at least try to
(In reply to Dan Lewis from comment #27)
Yesterday, I downloaded LibreOffice from the PPA to test this problem on
a 32 bit laptop using Ubuntu 14.04. (Mine was associated with the
possibility of the mysql native connector might be the cause of this problem
when using MySQL with LibreOffice.
I have never got copy paste between client and server to work with
Remina. I'm also on up-to-date 14.04.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to remmina in Ubuntu.
https://bugs.launchpad.net/bugs/937522
Title:
rdp clipboard
Which version of ubuntu libreoffice will that fix be in?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1276442
Title:
libreoffice Mysql connector fails over network
Status in
Thanks.
I can confirm this works in ubuntu 14.04 64 bit libreoffice 4.3
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1276442
Title:
libreoffice Mysql connector fails over
I have tested the build 1:4.3.2~rc2-0ubuntu1~trusty2 and the problem has
been fixed.
Thanks to all.
I have not updated the status of this report, not being sure what
correct procedure is.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to
I have downloaded and tested the most recent ubuntu build -
1:4.3.2~rc2-0ubuntu1~trusty2 - and the problem is fixed.
Thanks to all.
I have not changed the status of this report since I'm not sure if a
final decision has been made on the correct set of libraries to be used.
I have also updated
(In reply to comment #17)
(In reply to comment #16)
I see the severity has been reduced.
Now I don't understand these things, so forgive me for asking. However, why
is this less severe now, since the current ubuntu ppa release for BASE users
is still unusable?
This bug tracker
I see the severity has been reduced.
Now I don't understand these things, so forgive me for asking. However,
why is this less severe now, since the current ubuntu ppa release for
BASE users is still unusable?
--
You received this bug notification because you are a member of Desktop
Packages,
Same problem in 12.04. This happened sometime after a gnome-control-
center (and -data) update (to 1:3.4.2-0ubuntu0.13.1) this morning.
I tried going back to the previous version (1:3.4.1-0ubuntu1), to no
avail.
Both Alsa and PulseAudio sound still work, but the failure of the Test
Sound
My mistake. I have previously deleted and re-installed pulseaudio.
However, it seems that to get the test sound to work one needs
'libcanberra-pulse'.
All OK for me now.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to
jph - that sound familiar. I had similar problems moving from
libreoffice 3 to 4.1. Some date/time field formats changed, and the
mysql connector supplied as an extension by libreoffice didn't work.
The ubuntu connector, however, did work until this more recent network
problem.
--
You received
Same problem with LibreOffice latest 4.2.1.1.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1276442
Title:
libreoffice Mysql connector fails over network
Status in
A workaround which is OK for me is to use Mysql(JDBC). It is slower,
but it seems to work. Whether it is suitable for commercial use I
couldn't say.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
This is driving me potty.
It seems I first have to attempt to connect the sink using Blueman,
which fails with Connection Failed: Stream setup failed
I then use pactl to load the module-bluetooth-discover, and attempt
reconnection, which usually works.
If I do these two thing the other way
Same problem for me in 14.04.
I have to attempt to connect via blueman to the device first which
fails. Then
pactl load-module module-bluetooth-discover
then connect with blueman again. I now get sound, Pulseaudio claims it
is a2dp, blueman says not. The sound is poor, so I think blueman is
** Package changed: ubuntu = libreoffice (Ubuntu)
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1276442
Title:
libreoffice Mysql connector fails over network
Status in
I am on ubuntu 13.10 client, xubuntu 13.10 (headless) server. The
client has Remmina 1.0.0.4 installed (confirmed with synaptic), although
the 'about' reports only 0.9.99.1 for itself and all plugins which is
most confusing.
The server has xrdp 0.6.0-1 installed.
I cannot get copy and paste
On my 32 bit system the 32 bit version fails to install as an extension.
I'm not quite sure what the problem is. It looked a bit as if it
expected mysql to be installed on the PC I'm connecting from (and
possibly open office as well).
I'll continue with JDBC for now, but hope that ubuntu will
Apologies for my last post (#8), I wasn't as clear as I should have
been.
What I meant was that the workaround in #6 didn't work for me. I could
not get get the open office extension to install at all.
--
You received this bug notification because you are a member of Desktop
Packages, which is
I look after a relative's 14.04 xubuntu system. They live some way away
so it wasn't possible for me to help them directly. They lost all
internet connections, so a) couldn't look for solutions, and b) couldn't
do any upgrades. They are capable of following detailed instructions,
but don't
I have tried version 45 on a different system, running trusty 14.04, and
it works properly.
What can do I do help resolve the problem on my 16.04 system?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
Hi again,
I thought I should at least try testing without any extensions enabled.
That fixed it on xenial :-)
The offending extension was QuoteAndComposeManager 0.3.32.3 (1/16/13).
Disabling this resolved the issue. My other extensions (especially
Lightning, which is important to me) are OK.
Public bug reported:
On 19/7/16 I accept updates for thunderbird 38 to 45.2, using the
standard ubuntu update process on 16.04.1 xenial, kernel
"4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64
x86_64 x86_64 GNU/Linux" (followed by a lightning extension update).
I could not
I'm happy to test a beta fix if that helps, given a ppa or other method.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/1604394
Title:
send button does not work
Status in
I'm also happy to try and help to diagnose the problem if it's only
happening on some systems.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/1604394
Title:
send button does not
For the importance level, this version of Thunderbird is unusable, at
least on some systems. Not everyone will find it that easy to downgrade
to 38, so it really needs to be withdrawn ASAP before too many people
update to it.
--
You received this bug notification because you are a member of
I assume someone at ubuntu has to close this. If it's up to be as the
raiser, could someone let me know what the appropriate procedure is.
I also found a new version of the QuoteAndComposeManager extension (0.4.1) that
works in version 45.
--
You received this bug notification because you
Close this?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/1604394
Title:
send button does not work
Status in thunderbird package in Ubuntu:
Confirmed
Bug description:
On
I've marked it 'fix released'.
** Changed in: thunderbird (Ubuntu)
Status: Confirmed => Fix Released
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/1604394
Title:
send
Marco - If you are referring to my comments, I freely admit my linux
knowledge is very limited.
As a client upgrading from 17.04 I do not, and seemingly have no way of
knowing, what a valid configuration is in this respect. I'm not using
Unity any more, and am using Ubuntu (Xorg) rather than the
Please forgive me, but I am not quite clear whether this bug report
suggests that the startcenter desktop should no longer exist or not, or
whether it should just be in a different package.
I am a libreoffice user, and like to keep up to date with changes and
fixes, and am on:
Version: 6.0.3.1
Public bug reported:
I am on 19.10. Duplicity crashes as soon as I try to start a backup, as
below. It was running fine on 19.04.
Traceback (innermost last):
File "/usr/bin/duplicity", line 107, in
with_tempdir(main)
File "/usr/bin/duplicity", line 93, in with_tempdir
fn()
File
I notice that this problem (using deja-dup to run duplicity) only occurs
when I run as sudo or pkexec (I need to do so to back up some kernel
files).
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to duplicity in Ubuntu.
Sorry to be difficult, but:
PYTHONPATH='.' duplicity --version
Traceback (most recent call last):
File "/usr/bin/duplicity", line 55, in
from duplicity.dup_main import main
ImportError: No module named duplicity.dup_main
--
You received this bug notification because you are a member of
I got that update, and things have changed a bit.
usr/lib/python3/dist-packages$ python3 duplicity/dup_main.py
returns nothing, which I think is what you wanted.
But:
/usr/lib/python3/dist-packages$ duplicity
Traceback (most recent call last):
File "/usr/bin/duplicity", line 55, in
To be clear, I'm now on version 0.8.09-0ubuntu0ppa1526~ubuntu19.10.1
(eoan)
I rebooted after installing (just in case). I didn't purge beforehand,
so I then did so, did an apt autoremove, and reinstalled it. No change.
--
You received this bug notification because you are a member of Desktop
python3 /usr/bin/duplicity --version
duplicity 0.8.09
Success!
But as before:
duplicity --version
Traceback (most recent call last):
File "/usr/bin/duplicity", line 55, in
from duplicity.dup_main import main
ImportError: No module named duplicity.dup_main
Ditto for "/usr/bin/duplicity
OK (I didn't do so before because the python3 command seemed to work).
find /usr -type d -name duplicity -ls
1602725 4 drwxr-xr-x 2 root root 4096 Dec 15 20:10
/usr/share/doc/duplicity
1602642 4 drwxr-xr-x 4 root root 4096 Dec 15 20:10
I had done, but just to be sure I purged it again, autoremove the un-
needed items (python fasteners etc), reinstalled, rebooted, and get the
same error on "duplicity --version"
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to duplicity
I'm not sure whether the fix mentioned is for the last problenm I
encountered, but having updated duplicity at 20:20GMT (now version
0.8.09-0ubuntu0ppa1524~ubuntu19.10.1), when I type:
duplicity --version
I still get:
Traceback (most recent call last):
File "/usr/bin/duplicity", line 55, in
I'm not quite sure what your last comment means, so here are 4 attempts.
PYTHONPATH='.' duplicity/dup_main.py --version
bash: duplicity/dup_main.py: No such file or directory
duplicity/dup_main.py --version
bash: duplicity/dup_main.py: No such file or directory
PYTHONPATH='.' python3
Well that may explain something. I have no python3.X directory. I have
python3, and it contains dist-packages.
I did try:
/usr/lib/python3/dist-packages$ python3 duplicity/dup_main.py
Traceback (most recent call last):
File "duplicity/dup_main.py", line 54, in
from . import
After a quick web search I tried running
duplicity --version
That told me I needed to install 'future' with pip. So I installed
python-pip, future, and fasteners.
I now fail at:
duplicity --version
Traceback (most recent call last):
File "/usr/bin/duplicity", line 55, in
from
I had looked for a ppa but failed to find yours.
Unfortunately deja-dup doesn't recognise this new version, saying "Could
not understand duplicity version."
I tend to use GUIs for almost everything. I guess I will have to try to
translate my deja-dup instructions into duplicity command line.
Thanks very much. I'm glad I was able to help a little by testing
things.
Have you any thoughts about why deja-dup fails as I reported in #26? Do
I need to raise a separate report somewhere else?
--
You received this bug notification because you are a member of Desktop
Packages, which is
A few more deja-dup issues:
deja-dup (brings up GUI, I select backup...)
Traceback (most recent call last):
File "/usr/bin/duplicity", line 55, in
from duplicity.dup_main import main
ImportError: No module named duplicity.dup_main
sudo deja-dup (brings up GUI, I select backup...)
Which particular fix has been applied?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to duplicity in Ubuntu.
https://bugs.launchpad.net/bugs/1855736
Title:
Duplicity fails to start
Status in Duplicity:
Fix Committed
Status in
Yes, that's fixed. Thanks very much.
Now all I have to do is get deja dup to work:
Traceback (innermost last):
File "/usr/bin/duplicity", line 101, in
with_tempdir(main)
File "/usr/bin/duplicity", line 87, in with_tempdir
fn()
File
It is indeed strange, because I can't reproduce it now either. I get
the errors in #30 instead, with deja-dup saying it can't understand the
duplicity version.
I think what may have happened is that because I couldn't get deja-dup
to work I used the duplicity command line, and encrypted this
Until prompted by the status change (mentioning 6.3.4) on this I hadn't
checked it, expecting to have to wait for 6.4 on ubuntu.
I can confirm it's fixed in Version: 6.3.5.1
Build ID: 1:6.3.5~rc1-0ubuntu0.19.10.1~lo1
CPU threads: 8; OS: Linux 5.3; UI render: default; VCL: x11;
Locale: en-GB
1532 this morning fixed it. Thanks! :-)
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to duplicity in Ubuntu.
https://bugs.launchpad.net/bugs/1855736
Title:
Duplicity fails to start
Status in Duplicity:
Fix Committed
Status in
With version 0.8.09-0ubuntu0ppa1535-ubuntu19.10.1 (eoan) deja-dup now
seems to start to work as a normal user, but I need to backup some root
stuff, and when run under sudo or pkexec I get the following
immediately:
Traceback (innermost last):
File "/usr/bin/duplicity", line 101, in
It was fixed. My system later updated to version 1531 as above, and
this then failed in the same way as before. I had to apply your sed
patch to make it work.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to duplicity in Ubuntu.
With the latest update duplicity still fails. Version
0.8.09-0ubuntu0ppa1531-ubuntu19.10.1 (eoan).
I had to redo the sed from #25.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to duplicity in Ubuntu.
Sadly not. I purged, installed, and it failed as before. I had to redo
the sed.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to duplicity in Ubuntu.
https://bugs.launchpad.net/bugs/1855736
Title:
Duplicity fails to start
Status in
Thanks very much indeed. I really appreciate all the work you and others do in
supporting us, the users.
It all works fine with deja-dup now. I'm now on duplicity version
0.8.09-0ubuntu0ppa1542-ubuntu19.10.1 (eoan), and deja-dup version 40.1-1ubuntu2
Should I close this report myself, or
Thanks Rico. I always struggle to find the right way to report issues,
especially when there is no crash or other evidence (ubuntu-bug doesn't
recognise libreoffice).
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in
I wish the local help could be included in the normal installation. It
looks as if the change to the web-based version in earlier versions has
been removed, but the local help doesn't work outside of snaps.
I have to admit I fail to understand snaps.
--
You received this bug notification
Strange. It doesn't work for me, and I've even moved on to the pre-
release:
Version: 6.4.4.1
Build ID: 1:6.4.4~rc1-0ubuntu0.20.04.1
CPU threads: 8; OS: Linux 5.4; UI render: default; VCL: gtk3;
Locale: en-GB (en_GB.UTF-8); UI-Language: en-GB
Calc: threaded
--
You received this bug
Public bug reported:
In 20.04 cut/copy and paste does not work reliably in Writer.
This has been reported in bugzilla, but seems to only affect ubuntu
20.04.
See https://bugs.documentfoundation.org/show_bug.cgi?id=133029
One report included a video.
My report there said:
I copy and paste,
I have just started having this problem, having updated to 20.04. So
far I have only encountered it with libreoffice writer, about 30% of the
time I copy/cut and paste (whether by menu or keyboard shortcuts). I do
this a lot due to the nature of my writing.
This is the first time since I moved
I would like to try upgrading mutter (proposed) and testing and using it
if possible but a mass of other stuff is also said to be required (By
synaptic), including kernel. Is that correct?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to
I have tested using the vanilla version (debs) of libreoffice and had
the same problem as in the ubuntu-specific build. (I also tested on
Windows 10 and did not have the problem).
I have failed to replicate the problem with geany on ubuntu.
--
You received this bug notification because you are
I used 'developer options' to install all the proposed updates last
night. I could not find a way to just update the 4 mutter files - it
insisted on updating many files including the kernel.
So far, so good. I've done 30 or so cut/copy and paste with no errors
so far.
I wouldn't know how to
Thanks Adam. I've made a note for then next time I need to try this.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mutter in Ubuntu.
https://bugs.launchpad.net/bugs/1852183
Title:
[X11] copy/paste (clipboard) with LibreOffice is
Sebastien - that works for me - I now get the local web-based help (I'd
still prefer the old fashioned sort, but never mind!),
With the new xcd it reports it is:
Version: 6.4.3.2
Build ID: 1:6.4.4~rc1-0ubuntu0.20.04.1
CPU threads: 8; OS: Linux 5.4; UI render: default; VCL: x11;
Locale: en-GB
Just for info, I've never used the 'clipboard indicator extension', so
disabling it wasn't an option for me.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mutter in Ubuntu.
https://bugs.launchpad.net/bugs/1852183
Title:
[X11]
I now realise a couple of my Calc spreadsheets have been corrupted
because of faulty copy and paste. The context menu is definitely the
worst offender, but now any regular copy and paste (eg weekly or monthly
readings of various things) have to be double-checked.
For me, this is a Major bug. To
Oh dear. Davide, you are right. I habitually use keyboard control keys
for cut, copy and paste, and had to try quite hard to get the problem.
Using the context menu (within one writer document) it fails for almost
every other try.
Using the main menu it rarely fails, but it did occasionally.
Any chance this will get into focal soon? It's still making a mess of
my spreadsheets.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mutter in Ubuntu.
https://bugs.launchpad.net/bugs/1879968
Title:
copy/paste still sometimes fails
I just did a right click copy and paste in writer and it works the 1st
time, 2nd time it uses the 1st copy not the 2nd. And so on. All said to
be fixed in the next version - at this rate in a month or 2.
--
You received this bug notification because you are a member of Desktop
Packages, which
Sadly, ubuntu 20.04 has just released 3.36.4, which doesn't fix the
problem.
It'd be good if 3.36.5 was at least available in developer options.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mutter in Ubuntu.
Hi. My mistake. I had, some time ago, needed to install one package
from focal-proposed, and to do this had turned off letting synaptic etc
from showing all proposed updates by adding a file in
/etc/apt/preference.d. I'd forgotten about this.
sudo aptitude -t focal-proposed
showed that mutter
3.36.6-1 tested on my focal system using focal-proposed. All seems OK
thus far.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mutter in Ubuntu.
https://bugs.launchpad.net/bugs/1879968
Title:
Copy/paste still sometimes fails in
Marco - as I said, that is what I have done, but I do not see the focal-
proposed updates for mutter. In fact I see no proposed updates at all.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mutter in Ubuntu.
I am on focal, with the 'developer options' pre-release option ticked
(and repos re-reloaded). I'm not seeing any proposed updates. Is it
available to the public or not?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mutter in Ubuntu.
Daniel, sorry, but as far as I am concerned this is an ubuntu bug. That
ubuntu uses, as a fundamental component (not just an add-on), something
else is surely an ubuntu problem?
If my car breaks down I don't search for the supplier of a component, I
go to the car maker. I do not know if other
Can this get escalated in any way?
Surely such a basic operation as cut/copy and paste should be totally
reliable, as it has been on all the systems I have used since 1970. A
fundamental inability to do what a user requests is critical, in my
view.
I think I will have to ask people in the IT
Fixed for me in Version: 6.4.4.2
Build ID: 1:6.4.4~rc2-0ubuntu0.20.04.1
CPU threads: 8; OS: Linux 5.4; UI render: default; VCL: gtk3;
Locale: en-GB (en_GB.UTF-8); UI-Language: en-GB
Calc: threaded
Thanks very much.
--
You received this bug notification because you are a member of Desktop
Ethany - is there something else I can do? I've installed the proposed
update, retested, and so far all seems well (as I said in #159).
It's difficult to test and report on a problem which doesn't happen
every time you do something. I never found a pattern to it, just when
it did start to
I tried to reproduce bug #1852183 with just one writer document, and
failed to do so after the mutter update. Maybe I didn't try hard enough,
but it didn't re-occur after many trials in one writer document.
However, I have now tested copying between two writer documents, and
reproduced the same
It is not fixed in mutter 3.36.3 using libreoffice. I have checked and
o have 3.36.3 installed (and rebooted) and tested again. It failed
first time.
It seems to me that there is something very odd going on here. How was
the fix tested?
This is second time it has been 'fixed' but users have
Adam - thanks for the clarification. I'm afraid for some of us ordinary
users the subtleties of 'fix released' but not released in ubuntu to the
outside world evaded me. Sorry.
I sincerely hope the fix works!
--
You received this bug notification because you are a member of Desktop
Packages,
I'd really like to test this (on 20.04), but there is no sign of it yet,
even as a developer option pre-release.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mutter in Ubuntu.
https://bugs.launchpad.net/bugs/1879968
Title:
To test just the proposed libreoffice changes I'll need some help. I
cannot, for instance get this to work:
cat
Paul: That's precisely what I have been trying to do, as I imagined
would be clear from the fact that I've been following the instructions
on how to do just that, by editing the proposed-updates file.
But I don't know how to select just libreoffice (and all it's files) for
update in aptitude.
I don't suppose you could explain some of that could you? The install
command is too complex for a simple fellow like myself - from the cut
command on (I get as far as the selection of upgradable items with a
name that includes the version number).
I don't think I'm in danger of getting updates
Olivier - thanks - I understand now. I've done the update. It turned
out that there were three modules that were't selected using this method
(nlpsolver, wiki-publisher and fonts-opensymbol) so I installed them as
well.
** Tags removed: focal verification-needed verification-needed-focal
**
I am now using version Version: 6.4.4.2
Build ID: 1:6.4.4-0ubuntu0.20.04.1
CPU threads: 8; OS: Linux 5.4; UI render: default; VCL: gtk3;
Locale: en-GB (en_GB.UTF-8); UI-Language: en-GB
Calc: threaded
The Help now works as expected.
Thanks.
I changed the tag - I hooe I got that right.
--
You
Sorry, I don't understand. I have already tested this as I said in post
#22. What else do I need to do?
The repository I have used is http://ppa.launchpad.net/libreoffice
/libreoffice-prereleases/ubuntu . Is that different from 'proposed'?
--
You received this bug notification because you are
Marcello - yes indeed.
For me it is worst with spreadsheets, where I copy a lot of data
regularly. For instance when keeping a record of regular measurements, I
copy the previous item's formulae each time. I only started to realise
that a lot of my sheets were corrupted in early April.
With
I am still really struggling to understand why this is not a major issue
amongst ubuntu users. If I use the default interface I get driven crazy
several times a day with mainly libreoffice various applications,
copying and pasting and getting the wrong data.
Can it be that there are either very
Marcello. I switched to Wayland. For a while now I have noticed
Libreoffice, wine applications, and some others being irritatingly slow,
and wondered why. It's Wayland! Switching back to the normal ubuntu
desktop has bought speed back, but brought the bug back with it.
I can't help wondering
Good.
How long might this take to get into ubuntu proposed? Will someone
alert users that it's there to be tested?
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mutter in Ubuntu.
https://bugs.launchpad.net/bugs/1879968
Title:
I have the same problem on ubuntu 21.04 wayland. Logging on under
ubuntu xorg fixes it.
Windows sometimes don't close properly, and trying to exit can trigger a
logoff. Manually logging off and back on fixes it for a while, until
another window sticks.
Thunderbird version
I tried adding --display=:0 to the desktop commmand, as below:
Exec=thunderbird -addressbook --display=:0
I still get the same problem under wayland.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
The lswh information on graphics says:
Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1923632
Title:
Screen
I have the same problem on that kernel (ubuntu 20.10), and on the update
to 5.8.0-50.55. I have gone back to 5.8.0-48.54 and it has stabilised.
I get all sorts of different effects. Blocks of text being partially
blank, whole menu boxes being blank, and so on. This usually happened
after the
1 - 100 of 110 matches
Mail list logo
