[Desktop-packages] [Bug 1906792] Re: Chromium tabs freeze with two windows on Wayland (Xwayland)
I have the exact same issue as described by original report. Two windows of the browser on different workspaces, only happens when I use Wayland session. I collected more data on this: Release: Ubuntu Noble Numbat 24.04 and Ubuntu Mantic Minotaur 23.10 Hardware: Dell Inspiron-16-Plus-7620, i7-12700H, 32GB RAM. Browsers tested: Vivaldi (deb), Brave (deb), Brave (snap), Chromium (snap) As suggested by @vanvugt , I switched one browser setting, and it immediately solved the issue for me on all browsers affected. chrome://flags/#ozone-platform-hint Changed from default (always use x11), to auto (try wayland first, fallback to x11). It is quite easy to check that the setting is applied, by running this on the browser: chrome://gpu/ Searching the text for "ozone" I can see the following: --ozone-platform-hint=auto --ozone-platform=wayland I hope this helps. Please let me know if further testing is required. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xwayland in Ubuntu. https://bugs.launchpad.net/bugs/1906792 Title: Chromium tabs freeze with two windows on Wayland (Xwayland) Status in Mutter: New Status in mutter package in Ubuntu: Confirmed Status in xwayland package in Ubuntu: Confirmed Bug description: Original description: When using Chromium (snap) on Wayland (gnome-session), if I keep two windows open on different workspaces, sometimes the current tab becomes unusable as it freezes or is super-slow. This usually happens with specific pages open, like youtube, mattermost, google drive. Minimizing one of the two windows makes the other work fine. The issues does not happen if both windows are on the same workspace. I've seen this issue in 20.04 and 20.10, always on Wayland sessions. The same behavior doesn't happen on a plain X11 session. --- Updates: As for #1916458 this behaviour may happen also on the same workspace and with Google Chrome ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: gnome-shell 3.38.1-1ubuntu1.1 ProcVersionSignature: Ubuntu 5.8.0-29.31-generic 5.8.14 Uname: Linux 5.8.0-29-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu50.2 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: GNOME Date: Fri Dec 4 09:39:08 2020 DisplayManager: gdm3 InstallationDate: Installed on 2020-10-18 (46 days ago) InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Beta amd64 (20200930) RelatedPackageVersions: mutter-common 3.38.1-2ubuntu1 SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/mutter/+bug/1906792/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2012388] Re: X11 window (usually AnyDesk) at top-right of the screen is invisible and steals mouse clicks
I would like to add a quick update. - HexChat also triggers the same issue as Anydesk, both wayland and x11. - I upgraded to Mantic Minotaur and the issue persists - I disabled legacy tray icons support from the extension Ubuntu Appindicators, and after a reboot the issue cannot be reproduced. Obviously HexChat icon does not show up on the tray, but it does on the dock, so it is a decent workaround for me until a fix is in place. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell-extension-appindicator in Ubuntu. https://bugs.launchpad.net/bugs/2012388 Title: X11 window (usually AnyDesk) at top-right of the screen is invisible and steals mouse clicks Status in gnome-shell-extension-appindicator package in Ubuntu: Triaged Bug description: Hardware Model: Dell Inc. Inspiron 16 Plus 7620 Firmware version: 1.5.1 CPU i7-12700H x20 GPU: Nvidia RTX3060 / MaxQ GPU: Intel Alder Lake-P Release: Lunar Lobster Architecture: AMD64 Kernel: 6.1.0-16-generic GNOME version: 44.rc Using Latest daily image of Ubuntu Lunar Lobster, I noticed an issue with window focus when windows are placed under the top-right system tray. Since it is hard to explain, I am attaching a screenshot. I am unable to click or interact with anything in the area within green rectangle. Applications affected: - Firefox (snap) - Chromium (snap) - Vivaldi Browser (deb) - Mattermost (snap) ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: gnome-shell 44~rc-1ubuntu2 ProcVersionSignature: Ubuntu 6.1.0-16.16-generic 6.1.6 Uname: Linux 6.1.0-16-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.26.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Tue Mar 21 20:35:05 2023 DisplayManager: gdm3 InstallationDate: Installed on 2023-01-23 (56 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) RelatedPackageVersions: mutter-common 44~rc-1ubuntu3 SourcePackage: gnome-shell UpgradeStatus: Upgraded to lunar on 2023-03-02 (19 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell-extension-appindicator/+bug/2012388/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2012388] Re: AnyDesk X11 window is invisible and steals mouse clicks
I managed to file a bug with AnyDesk, and I linked this Launchpad bug report in it. However, I was not given a bug tracker link by AnyDesk, so I am unable to provide it here. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/2012388 Title: AnyDesk X11 window is invisible and steals mouse clicks Status in gnome-shell package in Ubuntu: Invalid Bug description: Hardware Model: Dell Inc. Inspiron 16 Plus 7620 Firmware version: 1.5.1 CPU i7-12700H x20 GPU: Nvidia RTX3060 / MaxQ GPU: Intel Alder Lake-P Release: Lunar Lobster Architecture: AMD64 Kernel: 6.1.0-16-generic GNOME version: 44.rc Using Latest daily image of Ubuntu Lunar Lobster, I noticed an issue with window focus when windows are placed under the top-right system tray. Since it is hard to explain, I am attaching a screenshot. I am unable to click or interact with anything in the area within green rectangle. Applications affected: - Firefox (snap) - Chromium (snap) - Vivaldi Browser (deb) - Mattermost (snap) ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: gnome-shell 44~rc-1ubuntu2 ProcVersionSignature: Ubuntu 6.1.0-16.16-generic 6.1.6 Uname: Linux 6.1.0-16-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.26.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Tue Mar 21 20:35:05 2023 DisplayManager: gdm3 InstallationDate: Installed on 2023-01-23 (56 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) RelatedPackageVersions: mutter-common 44~rc-1ubuntu3 SourcePackage: gnome-shell UpgradeStatus: Upgraded to lunar on 2023-03-02 (19 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2012388/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2012388] Re: AnyDesk X11 window is invisible and steals mouse clicks
I logged into a Xorg session and I could not see the window. However, I noticed I can actually see the window for a few moments, both on Wayland and Xorg, when I switch between virtual desktops. There is a small difference is when I switch between virtual desktops: - Wayland: the window appears for a moment, and it looks black - Xorg: the window appears for a moment, and it looks like Anydesk icon I am attaching a short video I took from Xorg session. ** Attachment added: "anydesk-switchvdesktop-xorg.mkv" https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2012388/+attachment/5657602/+files/anydesk-switchvdesktop-xorg.mkv -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/2012388 Title: AnyDesk X11 window is invisible and steals mouse clicks Status in gnome-shell package in Ubuntu: Invalid Bug description: Hardware Model: Dell Inc. Inspiron 16 Plus 7620 Firmware version: 1.5.1 CPU i7-12700H x20 GPU: Nvidia RTX3060 / MaxQ GPU: Intel Alder Lake-P Release: Lunar Lobster Architecture: AMD64 Kernel: 6.1.0-16-generic GNOME version: 44.rc Using Latest daily image of Ubuntu Lunar Lobster, I noticed an issue with window focus when windows are placed under the top-right system tray. Since it is hard to explain, I am attaching a screenshot. I am unable to click or interact with anything in the area within green rectangle. Applications affected: - Firefox (snap) - Chromium (snap) - Vivaldi Browser (deb) - Mattermost (snap) ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: gnome-shell 44~rc-1ubuntu2 ProcVersionSignature: Ubuntu 6.1.0-16.16-generic 6.1.6 Uname: Linux 6.1.0-16-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.26.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Tue Mar 21 20:35:05 2023 DisplayManager: gdm3 InstallationDate: Installed on 2023-01-23 (56 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) RelatedPackageVersions: mutter-common 44~rc-1ubuntu3 SourcePackage: gnome-shell UpgradeStatus: Upgraded to lunar on 2023-03-02 (19 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2012388/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2012388] Re: Unable to focus Windows below system tray (wayland session)
I am trying to report the bug upstream and jumping through the required
steps to create a customer account, waiting for it to be activated. I
will report back on that if I manage to actually file a bug there.
Regarding your question to run 'xwininfo -all', please find output below
here.
xwininfo: Window id: 0x600e5f (has no name)
Root window id: 0x49c (the root window) (has no name)
Parent window id: 0x49c (the root window) (has no name)
1 child:
0x4a0001c "AnyDesk": ("AnyDesk" "AnyDesk") 200x200+0+0 +2940+5
1 child:
0x4a0001d (has no name): () 1x1+-1+-1 +2939+4
Absolute upper-left X: 2940
Absolute upper-left Y: 5
Relative upper-left X: 2940
Relative upper-left Y: 5
Width: 200
Height: 200
Depth: 24
Visual: 0x41
Visual Class: TrueColor
Border width: 0
Class: InputOutput
Colormap: 0x40 (installed)
Bit Gravity State: ForgetGravity
Window Gravity State: NorthWestGravity
Backing Store State: NotUseful
Save Under State: no
Map State: IsViewable
Override Redirect State: yes
Corners: +2940+5 -300+5 -300-1235 +2940-1235
-geometry 200x200+2940+5
Bit gravity: ForgetGravity
Window gravity: NorthWestGravity
Backing-store hint: NotUseful
Backing-planes to be preserved: 0x
Backing pixel: 0
Save-unders: No
Someone wants these events:
StructureNotify
PropertyChange
Do not propagate these events:
Override redirection?: Yes
No window manager hints defined
Window manager hints:
Window state:
Skip Pager
Skip Taskbar
Process id: (unknown)
No normal window size hints defined
No zoom window size hints defined
No window shape defined
No border shape defined
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/2012388
Title:
Unable to focus Windows below system tray (wayland session)
Status in gnome-shell package in Ubuntu:
Opinion
Bug description:
Hardware Model: Dell Inc. Inspiron 16 Plus 7620
Firmware version: 1.5.1
CPU i7-12700H x20
GPU: Nvidia RTX3060 / MaxQ
GPU: Intel Alder Lake-P
Release: Lunar Lobster
Architecture: AMD64
Kernel: 6.1.0-16-generic
GNOME version: 44.rc
Using Latest daily image of Ubuntu Lunar Lobster, I noticed an issue
with window focus when windows are placed under the top-right system
tray.
Since it is hard to explain, I am attaching a screenshot. I am unable to
click or interact with anything in the area within green rectangle.
Applications affected:
- Firefox (snap)
- Chromium (snap)
- Vivaldi Browser (deb)
- Mattermost (snap)
ProblemType: Bug
DistroRelease: Ubuntu 23.04
Package: gnome-shell 44~rc-1ubuntu2
ProcVersionSignature: Ubuntu 6.1.0-16.16-generic 6.1.6
Uname: Linux 6.1.0-16-generic x86_64
NonfreeKernelModules: nvidia_modeset nvidia
ApportVersion: 2.26.0-0ubuntu2
Architecture: amd64
CasperMD5CheckResult: pass
CurrentDesktop: ubuntu:GNOME
Date: Tue Mar 21 20:35:05 2023
DisplayManager: gdm3
InstallationDate: Installed on 2023-01-23 (56 days ago)
InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020)
RelatedPackageVersions: mutter-common 44~rc-1ubuntu3
SourcePackage: gnome-shell
UpgradeStatus: Upgraded to lunar on 2023-03-02 (19 days ago)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2012388/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2012388] Re: Unable to focus Windows below system tray (wayland session)
Thank you for your help. I have been running some tests: - Disabled all extensions and re-logged the sessionSame result. However, when hovering over the previously mentioned rectangle, I noticed that a popup was appearing, repoting "Anydesk", an application that was set to autostart and had an icon on the taskbar. - Presto I went to prevent this application from auto starting on login, and I cannot reproduce the issue any more. - I re-enabled all gnome extensions, left Anydesk with autostart disabled, and re-logged. I cannot reproduce the issue. - I have other applications that are set to auto start and have a taskbar icon, such as ProtonMail Bridge, Nextcloud client, and Polychromatic. However I cannot reproduce the issue with those applications. Note. I have been using Anydesk for a long time and on Gnome and this is the first time I saw this problem. Do you believe it is worth exploring more about this issue or consider this resolved? I am happy to help if needed. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/2012388 Title: Unable to focus Windows below system tray (wayland session) Status in gnome-shell package in Ubuntu: Incomplete Bug description: Hardware Model: Dell Inc. Inspiron 16 Plus 7620 Firmware version: 1.5.1 CPU i7-12700H x20 GPU: Nvidia RTX3060 / MaxQ GPU: Intel Alder Lake-P Release: Lunar Lobster Architecture: AMD64 Kernel: 6.1.0-16-generic GNOME version: 44.rc Using Latest daily image of Ubuntu Lunar Lobster, I noticed an issue with window focus when windows are placed under the top-right system tray. Since it is hard to explain, I am attaching a screenshot. I am unable to click or interact with anything in the area within green rectangle. Applications affected: - Firefox (snap) - Chromium (snap) - Vivaldi Browser (deb) - Mattermost (snap) ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: gnome-shell 44~rc-1ubuntu2 ProcVersionSignature: Ubuntu 6.1.0-16.16-generic 6.1.6 Uname: Linux 6.1.0-16-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.26.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Tue Mar 21 20:35:05 2023 DisplayManager: gdm3 InstallationDate: Installed on 2023-01-23 (56 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) RelatedPackageVersions: mutter-common 44~rc-1ubuntu3 SourcePackage: gnome-shell UpgradeStatus: Upgraded to lunar on 2023-03-02 (19 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2012388/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 2012388] [NEW] Unable to focus Windows below system tray (wayland session)
Public bug reported: Hardware Model: Dell Inc. Inspiron 16 Plus 7620 Firmware version: 1.5.1 CPU i7-12700H x20 GPU: Nvidia RTX3060 / MaxQ GPU: Intel Alder Lake-P Release: Lunar Lobster Architecture: AMD64 Kernel: 6.1.0-16-generic GNOME version: 44.rc Using Latest daily image of Ubuntu Lunar Lobster, I noticed an issue with window focus when windows are placed under the top-right system tray. Since it is hard to explain, I am attaching a screenshot. I am unable to click or interact with anything in the area within green rectangle. Applications affected: - Firefox (snap) - Chromium (snap) - Vivaldi Browser (deb) - Mattermost (snap) ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: gnome-shell 44~rc-1ubuntu2 ProcVersionSignature: Ubuntu 6.1.0-16.16-generic 6.1.6 Uname: Linux 6.1.0-16-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.26.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Tue Mar 21 20:35:05 2023 DisplayManager: gdm3 InstallationDate: Installed on 2023-01-23 (56 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) RelatedPackageVersions: mutter-common 44~rc-1ubuntu3 SourcePackage: gnome-shell UpgradeStatus: Upgraded to lunar on 2023-03-02 (19 days ago) ** Affects: gnome-shell (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lunar wayland-session ** Attachment added: "window-focus-01.png" https://bugs.launchpad.net/bugs/2012388/+attachment/5656306/+files/window-focus-01.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/2012388 Title: Unable to focus Windows below system tray (wayland session) Status in gnome-shell package in Ubuntu: New Bug description: Hardware Model: Dell Inc. Inspiron 16 Plus 7620 Firmware version: 1.5.1 CPU i7-12700H x20 GPU: Nvidia RTX3060 / MaxQ GPU: Intel Alder Lake-P Release: Lunar Lobster Architecture: AMD64 Kernel: 6.1.0-16-generic GNOME version: 44.rc Using Latest daily image of Ubuntu Lunar Lobster, I noticed an issue with window focus when windows are placed under the top-right system tray. Since it is hard to explain, I am attaching a screenshot. I am unable to click or interact with anything in the area within green rectangle. Applications affected: - Firefox (snap) - Chromium (snap) - Vivaldi Browser (deb) - Mattermost (snap) ProblemType: Bug DistroRelease: Ubuntu 23.04 Package: gnome-shell 44~rc-1ubuntu2 ProcVersionSignature: Ubuntu 6.1.0-16.16-generic 6.1.6 Uname: Linux 6.1.0-16-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.26.0-0ubuntu2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Tue Mar 21 20:35:05 2023 DisplayManager: gdm3 InstallationDate: Installed on 2023-01-23 (56 days ago) InstallationMedia: Ubuntu 22.10 "Kinetic Kudu" - Release amd64 (20221020) RelatedPackageVersions: mutter-common 44~rc-1ubuntu3 SourcePackage: gnome-shell UpgradeStatus: Upgraded to lunar on 2023-03-02 (19 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/2012388/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1972726] Re: Update mutter to 42.1
Ubuntu Budgie 22.04 LTS (Xorg) Kernel 5.15.0-33-lowlatency libmutter-10-0 installed from proposed Budgie DE is behaving well, feels snappy and fast. No issues to report. Tests performed: - Check budgie panels and applets. - Move between virtual workspaces. - Window tiling using mouse. - Window tiling using shuffler shortcuts, layouts. - Window minimize and maximize animations. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1972726 Title: Update mutter to 42.1 Status in mutter package in Ubuntu: Fix Released Status in mutter source package in Jammy: Fix Committed Bug description: Impact -- There is a new bugfix release in the stable 42 series. This is a bigger update with lots of bugfixes as the first bugfix release in the 42 series. https://gitlab.gnome.org/GNOME/mutter/-/blob/42.1/NEWS Test Case - sudo apt install budgie-desktop gnome-session gnome-shell-extensions Install the update. Log out. Select your name on the login screen. Click the gear button to choose a session to log in to. Finish logging in. Verify that things continue to work well for all these sessions: Budgie GNOME GNOME Classic Ubuntu Ubuntu on Xorg (There are more specific test cases for some of the other bugs fixed with this update.) What Could Go Wrong --- Mutter is an essential component of the default Ubuntu desktop and for the desktop used by Ubuntu Budgie. A severe enough bug could mean that people are unable to use their desktop version of Ubuntu. Smaller bugs could interrupt people's workflows. mutter is part of GNOME Core and is included in the GNOME micro release exception https://wiki.ubuntu.com/StableReleaseUpdates/GNOME Other Info -- This update should not reach jammy-updates until these updates are fully phased in jammy-updates to avoid a known testview scrolling bug in apps like gedit and gnome-text-editor https://launchpad.net/ubuntu/+source/gtk+3.0/3.24.33-1ubuntu2 https://launchpad.net/ubuntu/+source/gtk4/4.6.3+ds1-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1972726/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1974471] Re: mouse becomes laggy when fractional scaling is enabled
Quick follow up. I installed Ubuntu 22.04 on same RaspberryPI, and I noticed a huge performance difference with fractional scaling on Wayland. On Wayland I was unable to find any lag or delay or performance hit. On Xorg though, even Ubuntu 22.04 had the same performance issues as Ubuntu Budgie 22.04. Thanks a lot for your expertise, Daniel. Much appreciated. We will make a note on our readme for Ubuntu Budgie ARM. I hope this helps someone down the line. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1974471 Title: mouse becomes laggy when fractional scaling is enabled Status in mutter package in Ubuntu: Won't Fix Bug description: Distribution: Ubuntu Budgie 22.04 LTS Kernel: 5.15.0-1007-raspi Package: libmutter-10-0 Architecture: arm64 Version: 42.0-3ubuntu2 5.15.0-1007-raspi On Ubuntu Budgie 22.04 LTS raspberry PI, turning on fractional scaling causes an issue where mouse movement becomes laggy and hard to control. This persists even if a reboot is performed after changing scaling settings. This was tested on Raspberry PI 4 8GB with 3 different mice. 2 USB wired, and one wireless with USB dongle. Same results with 3 mice. Disabling fractional scaling immediately solved the problem. Same tests were performed on Ubuntu Budgie 22.04 on amd64 laptop, with Intel CPU and Nvidia+Intel GPU. There was no issue with mouse performance on amd64 laptop. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libmutter-10-0 42.0-3ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-1007.7-raspi 5.15.35 Uname: Linux 5.15.0-1007-raspi aarch64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: Budgie:GNOME Date: Sat May 21 00:48:09 2022 ImageMediaBuild: 20210416 SourcePackage: mutter UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1974471/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1974471] Re: mouse becomes laggy when fractional scaling is enabled
Daniel, Thank you. This actually makes a lot of sense. Also, even if there is no fix, at least we will know what to tell our users if and when issues like this are reported. I am still going to test on Ubuntu on both Gnome and Wayland, and report if there is any difference, so we can keep it all for the record under same bug report. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1974471 Title: mouse becomes laggy when fractional scaling is enabled Status in mutter package in Ubuntu: Won't Fix Bug description: Distribution: Ubuntu Budgie 22.04 LTS Kernel: 5.15.0-1007-raspi Package: libmutter-10-0 Architecture: arm64 Version: 42.0-3ubuntu2 5.15.0-1007-raspi On Ubuntu Budgie 22.04 LTS raspberry PI, turning on fractional scaling causes an issue where mouse movement becomes laggy and hard to control. This persists even if a reboot is performed after changing scaling settings. This was tested on Raspberry PI 4 8GB with 3 different mice. 2 USB wired, and one wireless with USB dongle. Same results with 3 mice. Disabling fractional scaling immediately solved the problem. Same tests were performed on Ubuntu Budgie 22.04 on amd64 laptop, with Intel CPU and Nvidia+Intel GPU. There was no issue with mouse performance on amd64 laptop. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libmutter-10-0 42.0-3ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-1007.7-raspi 5.15.35 Uname: Linux 5.15.0-1007-raspi aarch64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: Budgie:GNOME Date: Sat May 21 00:48:09 2022 ImageMediaBuild: 20210416 SourcePackage: mutter UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1974471/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1974471] Re: mouse becomes laggy when fractional scaling is enabled
Daniel, This is with Xorg fractional scaling on Ubuntu Budgie ARM64. We don't have Wayland on Budgie DE, but I can flash Ubuntu 22.04 ARM64 on a spare microSD and test. Give me a few hours and I will follow up on that. Regarding input, yes I believe same issue as described on https://bugs.launchpad.net/bugs/1902436 . Mouse movements feel slower and also delayed around one second from the moment I move my hand to when I see the cursor moving. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1974471 Title: mouse becomes laggy when fractional scaling is enabled Status in mutter package in Ubuntu: Incomplete Bug description: Distribution: Ubuntu Budgie 22.04 LTS Kernel: 5.15.0-1007-raspi Package: libmutter-10-0 Architecture: arm64 Version: 42.0-3ubuntu2 5.15.0-1007-raspi On Ubuntu Budgie 22.04 LTS raspberry PI, turning on fractional scaling causes an issue where mouse movement becomes laggy and hard to control. This persists even if a reboot is performed after changing scaling settings. This was tested on Raspberry PI 4 8GB with 3 different mice. 2 USB wired, and one wireless with USB dongle. Same results with 3 mice. Disabling fractional scaling immediately solved the problem. Same tests were performed on Ubuntu Budgie 22.04 on amd64 laptop, with Intel CPU and Nvidia+Intel GPU. There was no issue with mouse performance on amd64 laptop. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libmutter-10-0 42.0-3ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-1007.7-raspi 5.15.35 Uname: Linux 5.15.0-1007-raspi aarch64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: Budgie:GNOME Date: Sat May 21 00:48:09 2022 ImageMediaBuild: 20210416 SourcePackage: mutter UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1974471/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1974471] [NEW] mouse becomes laggy when fractional scaling is enabled
Public bug reported: Distribution: Ubuntu Budgie 22.04 LTS Kernel: 5.15.0-1007-raspi Package: libmutter-10-0 Architecture: arm64 Version: 42.0-3ubuntu2 5.15.0-1007-raspi On Ubuntu Budgie 22.04 LTS raspberry PI, turning on fractional scaling causes an issue where mouse movement becomes laggy and hard to control. This persists even if a reboot is performed after changing scaling settings. This was tested on Raspberry PI 4 8GB with 3 different mice. 2 USB wired, and one wireless with USB dongle. Same results with 3 mice. Disabling fractional scaling immediately solved the problem. Same tests were performed on Ubuntu Budgie 22.04 on amd64 laptop, with Intel CPU and Nvidia+Intel GPU. There was no issue with mouse performance on amd64 laptop. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libmutter-10-0 42.0-3ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-1007.7-raspi 5.15.35 Uname: Linux 5.15.0-1007-raspi aarch64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: Budgie:GNOME Date: Sat May 21 00:48:09 2022 ImageMediaBuild: 20210416 SourcePackage: mutter UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: mutter (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug arm64 arm64-image jammy raspi-image -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1974471 Title: mouse becomes laggy when fractional scaling is enabled Status in mutter package in Ubuntu: New Bug description: Distribution: Ubuntu Budgie 22.04 LTS Kernel: 5.15.0-1007-raspi Package: libmutter-10-0 Architecture: arm64 Version: 42.0-3ubuntu2 5.15.0-1007-raspi On Ubuntu Budgie 22.04 LTS raspberry PI, turning on fractional scaling causes an issue where mouse movement becomes laggy and hard to control. This persists even if a reboot is performed after changing scaling settings. This was tested on Raspberry PI 4 8GB with 3 different mice. 2 USB wired, and one wireless with USB dongle. Same results with 3 mice. Disabling fractional scaling immediately solved the problem. Same tests were performed on Ubuntu Budgie 22.04 on amd64 laptop, with Intel CPU and Nvidia+Intel GPU. There was no issue with mouse performance on amd64 laptop. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: libmutter-10-0 42.0-3ubuntu2 ProcVersionSignature: Ubuntu 5.15.0-1007.7-raspi 5.15.35 Uname: Linux 5.15.0-1007-raspi aarch64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: arm64 CasperMD5CheckResult: unknown CurrentDesktop: Budgie:GNOME Date: Sat May 21 00:48:09 2022 ImageMediaBuild: 20210416 SourcePackage: mutter UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1974471/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1873895] Re: Regression: block staircase display with side-by-side monitors of different pixel widths
I tested both Xubuntu 20.04 and Ubuntu MATE 20.04 And I had the very same issue, however I have a single display, 3440x1440, using AMD RADEON VII GPU. Kubuntu 20.04 and Ubuntu Budgie 20.04 do not have this issue. Originally I opened a separate bug but it was marked as duplicate. I wanted to confirm the same issue is still there. After testing 20.04.1, making both xubuntu and ubuntu MATE unusable unless compositor is disabled as suggested in this bug report: https://bugs.launchpad.net/ubuntu/+source/marco/+bug/1876480 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libxcb in Ubuntu. https://bugs.launchpad.net/bugs/1873895 Title: Regression: block staircase display with side-by-side monitors of different pixel widths Status in Linux: Unknown Status in libxcb package in Ubuntu: Confirmed Status in xfwm4 package in Ubuntu: Confirmed Status in xserver-xorg-video-amdgpu package in Ubuntu: Confirmed Bug description: Update based on further research. This only happens when the secondary external display is operating at a different pixel width to the internal. In this case eDP is 1920x1080 whereas the external HDMI-A-0 is natively 1680x1050. It is caused by xfwm4's recent switch from using glx to xpresent for AMD GPUs. The underlying bug is in the AMD driver. I was able to reproduce on an external 1920x1200 display only when it was set to a non-native 1680x1050 resolution. --- Two identical Lenovo E495 laptops with 20.04 installed. The problem occurred initially on the laptop that is having package upgrades applied regularly. With dual monitors and the external monitor placed left or right the display has a blocked staircase effect shown in the attached photograph, and seems related to https://gitlab.freedesktop.org/xorg/driver/xf86-video- amdgpu/-/issues/10 More detailed investigation suggests it only happens when the X coordinate of the two monitors is different. The symptom looks like an off-by-one error because it appears as if the display is divided into, say, 10 rows and 15 columns but the first row has 16 'columns' worth of blocks on it and so wraps to the beginning of the 2nd row, and so on. On the laptop without package upgrades being applied this didn't happen. So I upgraded it (314 packages) and restarted and it too sees the same problem. I suspected libxcomposite1 and downgraded it to 1:0.4.5-0ubuntu1 but that didn't solve it. I now suspect libxcb but so far haven't been able to prove it. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: XFCE DistUpgraded: Fresh install DistroCodename: focal DistroRelease: Ubuntu 20.04 DistroVariant: ubuntu GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Picasso [1002:15d8] (rev c1) (prog-if 00 [VGA controller]) Subsystem: Lenovo ThinkPad E595 [17aa:5124] InstallationDate: Installed on 2020-04-08 (11 days ago) InstallationMedia: Xubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200408) MachineType: LENOVO 20NECTO1WW Package: xserver-xorg-video-amdgpu 19.1.0-1 PackageArchitecture: amd64 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-21-generic root=/dev/mapper/ELLOE000-rootfs ro acpi_osi=! "acpi_osi=Windows 2016" quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-21.25-generic 5.4.27 Tags: focal ubuntu ubuntu Uname: Linux 5.4.0-21-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirt lp lpadmin lxd plugdev sambashare sudo users _MarkForUpload: True dmi.bios.date: 12/23/2019 dmi.bios.vendor: LENOVO dmi.bios.version: R11ET32W (1.12 ) dmi.board.asset.tag: Not Available dmi.board.name: 20NECTO1WW dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrR11ET32W(1.12):bd12/23/2019:svnLENOVO:pn20NECTO1WW:pvrThinkPadE495:rvnLENOVO:rn20NECTO1WW:rvrNotDefined:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad E495 dmi.product.name: 20NECTO1WW dmi.product.sku: LENOVO_MT_20NE_BU_Think_FM_ThinkPad E495 dmi.product.version: ThinkPad E495 dmi.sys.vendor: LENOVO version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.4-2ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau
[Desktop-packages] [Bug 1799580] Re: Settings made by qasmixer are lost on next reboot
I noticed the same bug affecting me on 3 installs: 1. Ubuntu Budgie 20.04 with Ubuntu Studio tools. Desktop, USB audio interface. 2. Ubuntu Budgie 20.04 with Ubuntu Studio tools. Laptop, Internal Audio card. 3. Ubuntu Studio 20.10 daily. Desktop, USB audio interface. I do not think the issue is specifically of QASmixer. I tried to manipulate ALSA volume settings using alsamixer and and alsactl store, both with normal user and using sudo. Volume settings persist in the session, if I close and reopen QASmixer or alsamixer, but all volume settings are reset on reboot. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-utils in Ubuntu. https://bugs.launchpad.net/bugs/1799580 Title: Settings made by qasmixer are lost on next reboot Status in alsa-utils package in Ubuntu: Confirmed Bug description: I use qasmixer to set the "Synth" volume to full, on my SoundBlaster Live sound-card. On prior levels of Ubuntu (through 18.04), any settings I make are preserved over reboots. On the latest level of Ubuntu (18.10) the settings are effective only as long as the system is running. The next time I reboot, the settings are gone, and I have to use qasmixer to set them all over again. I expected the settings made by qasmixer to be preserved on the next reboot, as with past levels of Ubuntu. The settings made by qasmixer are not preserved over a reboot on Ubuntu 18.10. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: qasmixer 0.21.0-1.1 ProcVersionSignature: Ubuntu 4.18.0-10.11-generic 4.18.12 Uname: Linux 4.18.0-10-generic i686 ApportVersion: 2.20.10-0ubuntu13 Architecture: i386 CurrentDesktop: LXQt Date: Tue Oct 23 14:59:06 2018 InstallationDate: Installed on 2018-10-23 (0 days ago) InstallationMedia: Lubuntu 18.10 "Cosmic Cuttlefish" - Release i386 (20181017.2) SourcePackage: qastools UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-utils/+bug/1799580/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1825717] Re: hplip issue during hp-setup - stuck at plugin install
Additional Feedback. I did a fresh install of ubuntu-budgie 19.04 1. installed hplip from repos (version 3.19.1) 2. ran hp-setup -i 3. went through the steps 4. install completed including plugin, can print and scan with no issue -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1825717 Title: hplip issue during hp-setup - stuck at plugin install Status in hplip package in Ubuntu: Confirmed Bug description: Fresh install of Kubuntu 19.04 Installed hplip from repositories, available version is 3.19.1+dfsg0-1 When I start setup with hp-setup, this happens: 1. I am asked connection type. I select network ethernet 2. My printer is detected. I select it and hit next 3. I am told about the proprietary plugin to download. I confirm, accept download. I enter my user's password. I get a confirmation that the plugin is correctly Installed. 4. On next screen, I get a warning and cannot continue installation. I am told this printer needs a proprietary plugin to work correctly. After this I am stuck in a loop between points 3 and 4. I also tried to start hp-setup from super user on command line. but no way around this issue. What I did next, I manually downloaded hplip-3.19.3.run from HP website. Removed version of hplip installed from repositories. Installed from manually downloaded package, followed the very same steps. Everything worked fine and printer is installed successfully. I hope this information is useful. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1825717/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1825717] Re: hplip issue during hp-setup - stuck at plugin install
Additional Feedback. I did a fresh install of ubuntu-budgie 19.04 1. installed hplip from repos (version 3.19.1) 2. ran hp-setup -i 3. went through the steps 4. install completed including plugin, can print and scan with no issue -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1825717 Title: hplip issue during hp-setup - stuck at plugin install Status in hplip package in Ubuntu: Confirmed Bug description: Fresh install of Kubuntu 19.04 Installed hplip from repositories, available version is 3.19.1+dfsg0-1 When I start setup with hp-setup, this happens: 1. I am asked connection type. I select network ethernet 2. My printer is detected. I select it and hit next 3. I am told about the proprietary plugin to download. I confirm, accept download. I enter my user's password. I get a confirmation that the plugin is correctly Installed. 4. On next screen, I get a warning and cannot continue installation. I am told this printer needs a proprietary plugin to work correctly. After this I am stuck in a loop between points 3 and 4. I also tried to start hp-setup from super user on command line. but no way around this issue. What I did next, I manually downloaded hplip-3.19.3.run from HP website. Removed version of hplip installed from repositories. Installed from manually downloaded package, followed the very same steps. Everything worked fine and printer is installed successfully. I hope this information is useful. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1825717/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1825717] Re: hplip issue during hp-setup - stuck at plugin install
I re-created the same issue on another install, this time Ubuntu-Budgie 19.04. Same issue happened, same solution fixed it. Detailed steps I followed to fix the issue: 1. Go to https://developers.hp.com/hp-linux-imaging-and-printing/gethplip . 2. Download latest version for Ubuntu . At the time of writing latest version is 3.19.3 . 3. Download hplip-3.19.3.run file, remember to change permissions to make it executable. 4. Remove hplip installed by your distribution repositories. 5. Download hplip-3.19.3-plugin.run and hplip-3.19.3-plugin.run.asc from https://developers.hp.com/hp-linux-imaging-and-printing/plugins . 6. run hplip-3.19.3.run in a terminal, follow instructions on screen. 7. During printer setup process, when asked, always use interactive mode instead of gui. When asked for plugin, select path instead of download from server, provide path including full name of hplip-3.19.3-plugin.run . -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1825717 Title: hplip issue during hp-setup - stuck at plugin install Status in hplip package in Ubuntu: New Bug description: Fresh install of Kubuntu 19.04 Installed hplip from repositories, available version is 3.19.1+dfsg0-1 When I start setup with hp-setup, this happens: 1. I am asked connection type. I select network ethernet 2. My printer is detected. I select it and hit next 3. I am told about the proprietary plugin to download. I confirm, accept download. I enter my user's password. I get a confirmation that the plugin is correctly Installed. 4. On next screen, I get a warning and cannot continue installation. I am told this printer needs a proprietary plugin to work correctly. After this I am stuck in a loop between points 3 and 4. I also tried to start hp-setup from super user on command line. but no way around this issue. What I did next, I manually downloaded hplip-3.19.3.run from HP website. Removed version of hplip installed from repositories. Installed from manually downloaded package, followed the very same steps. Everything worked fine and printer is installed successfully. I hope this information is useful. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1825717/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1825717] [NEW] hplip issue during hp-setup - stuck at plugin install
Public bug reported: Fresh install of Kubuntu 19.04 Installed hplip from repositories, available version is 3.19.1+dfsg0-1 When I start setup with hp-setup, this happens: 1. I am asked connection type. I select network ethernet 2. My printer is detected. I select it and hit next 3. I am told about the proprietary plugin to download. I confirm, accept download. I enter my user's password. I get a confirmation that the plugin is correctly Installed. 4. On next screen, I get a warning and cannot continue installation. I am told this printer needs a proprietary plugin to work correctly. After this I am stuck in a loop between points 3 and 4. I also tried to start hp-setup from super user on command line. but no way around this issue. What I did next, I manually downloaded hplip-3.19.3.run from HP website. Removed version of hplip installed from repositories. Installed from manually downloaded package, followed the very same steps. Everything worked fine and printer is installed successfully. I hope this information is useful. ** Affects: hplip (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1825717 Title: hplip issue during hp-setup - stuck at plugin install Status in hplip package in Ubuntu: New Bug description: Fresh install of Kubuntu 19.04 Installed hplip from repositories, available version is 3.19.1+dfsg0-1 When I start setup with hp-setup, this happens: 1. I am asked connection type. I select network ethernet 2. My printer is detected. I select it and hit next 3. I am told about the proprietary plugin to download. I confirm, accept download. I enter my user's password. I get a confirmation that the plugin is correctly Installed. 4. On next screen, I get a warning and cannot continue installation. I am told this printer needs a proprietary plugin to work correctly. After this I am stuck in a loop between points 3 and 4. I also tried to start hp-setup from super user on command line. but no way around this issue. What I did next, I manually downloaded hplip-3.19.3.run from HP website. Removed version of hplip installed from repositories. Installed from manually downloaded package, followed the very same steps. Everything worked fine and printer is installed successfully. I hope this information is useful. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1825717/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1778011] Re: PRIME Power Saving mode draws too much power
This bug also affects me. I am running Kubuntu 18.04 on Gigabyte AERO14, CPU:i7-7700HQ (45W TDP), GPU:Nvidia 1050Ti I took a full system image with clonezilla, and tested Alberto Milone's PPA. System working fine after the upgrade. I tested switch+reboot around 20 times. Test results: No issue rebooting with or without switching GPU. GPU Switching: Switching GPU is now much faster. Even if i use it from nvidia gui, I get the popup window asking to reboot right away. system shutdown/reboot after I switch gpu is fast. Usual 5~10 seconds, same time it takes when I am not switching gpu. Power usage - Nvidia mode: powertop reports around 30w idle (cpu load:2~3%, gpu ops/sec:0) Power usage - Intel mode: powertop reports around 20w idle (cpu load:2~3%, gpu ops/sec:0) - Device stats report usage of 100% of the Nvidia 1050 in powertop, not sure if accurate. I hope it helps. Cheers, Mauro -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-prime in Ubuntu. https://bugs.launchpad.net/bugs/1778011 Title: PRIME Power Saving mode draws too much power Status in nvidia-prime package in Ubuntu: In Progress Status in ubuntu-drivers-common package in Ubuntu: In Progress Status in nvidia-prime source package in Bionic: In Progress Status in ubuntu-drivers-common source package in Bionic: In Progress Bug description: Relying on the nouveau driver and on the vga switcheroo (to get around a change in systemd LP: #1777099) caused increased power consumption, and slowed down the switching process. Solving the problem in systemd (LP: #1777099), and adding code in gpu- manager and in nvidia-prime to unload the nvidia modules, and to allow the PCI device to sleep, dramatically decreases power consumption. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-prime/+bug/1778011/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1725315] Re: evolution crashed with SIGSEGV in g_hash_table_lookup_node()
Per comment #9, I confirm it only happens on gnome-shell on wayland mode. I tested thoroughly over the last few days and I did not experience a single crash on gnome-shell on Xorg.Once I switch back to gnome-shell on wayland, the frequent crashes start happening again. Per comment #10, I tested the workaround: uninstall evolution-indicator package, and I confirm it works. No more evolution crashes on gnome- shell on wayland. PS I ran the tests mentioned above on 2 machines: on Virtualbox VM, and on Hardware. Same results on both. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/1725315 Title: evolution crashed with SIGSEGV in g_hash_table_lookup_node() Status in evolution package in Ubuntu: Confirmed Bug description: Every few minutes, evolution exits the desktop. Sometimes it will only stay up for seconds, and sometimes it exits in the first second. Occasionally it stays up for ~20 minutes. When it is running, it seems to function normally. This machine was upgraded from 17.04 (where Evolution was stable) to 17.10 release. Apport crashdump analysis attached. Looking at /var/log/syslog after one of these crashes, I see the following entries: Oct 20 09:50:00 es-lzz-det470s org.gnome.Shell.desktop[2287]: /usr/share/themes/Ambiance/gtk-2.0/apps/mate-panel.rc:30: error: invalid string constant "murrine-scrollbar", expected valid string constant Oct 20 09:50:00 es-lzz-det470s org.gnome.Shell.desktop[2287]: [Parent 8840] WARNING: pipe error (254): Connection reset by peer: file /build/firefox-9cfKiA/firefox-56.0+build6/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 353 Oct 20 09:50:52 es-lzz-det470s org.gnome.Shell.desktop[2287]: [Parent 8840] WARNING: pipe error (287): Connection reset by peer: file /build/firefox-9cfKiA/firefox-56.0+build6/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 353 Oct 20 09:50:52 es-lzz-det470s org.gnome.Shell.desktop[2287]: [Parent 8840] WARNING: pipe error (300): Connection reset by peer: file /build/firefox-9cfKiA/firefox-56.0+build6/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 353 Oct 20 09:50:52 es-lzz-det470s org.gnome.Shell.desktop[2287]: [Parent 8840] WARNING: pipe error (417): Connection reset by peer: file /build/firefox-9cfKiA/firefox-56.0+build6/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 353 Oct 20 09:50:57 es-lzz-det470s kernel: [88013.689438] evolution[1461]: segfault at 0 ip (null) sp 7ffee4f96718 error 14 in evolution[557e54c52000+7000] It is not clear that the first few syslog entries are related. Running evolution with debugging enabled: CAMEL_DEBUG=all evolution I see the following output when the crash occurs: ### message_list_regen_thread: got 1521 uids in folder 0x5615e38015f0 (john.mel...@esentire.com : Inbox) for expression:---(and (match-all (and (not (system-flag "deleted")) (not (system-flag "junk" (and (and (match-all (not (or (= (user-tag "label") "important") (user-flag "$Labelimportant") (user-flag "important" (match-all (not (or (= (user-tag "label") "work") (user-flag "$Labelwork") (user-flag "work" (match-all (not (or (= (user-tag "label") "personal") (user-flag "$Labelpersonal") (user-flag "personal" (match-all (not (or (= (user-tag "label") "todo") (user-flag "$Labeltodo") (user-flag "todo" (match-all (not (or (= (user-tag "label") "later") (user-flag "$Labellater") (user-flag "later")))--- message_list_regen_thread: got 1521 uids in folder 0x5615e38015f0 (john.mel...@esentire.com : Inbox) after tweak, hide_deleted:1, hide_junk:1 Segmentation fault (core dumped) Not sure if I can provide further information. This crash is highly- repeatable, happening hundreds of times/day. ProblemType: Crash DistroRelease: Ubuntu 17.10 Package: evolution 3.26.1-1 ProcVersionSignature: Ubuntu 4.13.0-16.19-lowlatency 4.13.4 Uname: Linux 4.13.0-16-lowlatency x86_64 ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 CrashCounter: 1 CurrentDesktop: ubuntu:GNOME Date: Fri Oct 20 09:50:57 2017 Disassembly: => 0x0: Cannot access memory at address 0x0 ExecutablePath: /usr/bin/evolution InstallationDate: Installed on 2017-05-31 (142 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) ProcCmdline: evolution -c current ProcEnviron: LANGUAGE=en_CA:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_CA.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x0: Cannot access memory at address 0x0 PC (0x) not located in a known VMA region (needed executable region)! SegvReason: executing NULL VMA Signal: 11 SourcePackage: evolution StacktraceTop: ?? () g_hash_table_lookup () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 gdk_x11_atom_to_xatom_for_display ()
[Desktop-packages] [Bug 1677198] Re: OpenVPN not Working in 17.04 via "Import a saved VPN configuration"
Hello, I had my share of issues with network-manager-openvpn, especially with profiles exported from pfsense appliances, as those tend to inline some configurations. I remember I had issues with Ubuntu 17.04 and 16.04 but as I am testing now, it seems all profiles I have can be imported and used. If you can share your configuration I might be able to help and run some tests. you can hide your certificate files and hostname. Tested on Ubuntu 17.04 - no issue network-manager-openvpn and network-manager-openvpn-gnome 1.2.6-2ubuntu1 Tested on Ubuntu 17.10 - no issue network-manager-openvpn and network-manager-openvpn-gnome 1.2.6-2ubuntu1 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager-openvpn in Ubuntu. https://bugs.launchpad.net/bugs/1677198 Title: OpenVPN not Working in 17.04 via "Import a saved VPN configuration" Status in NetworkManager: New Status in network-manager-openvpn package in Ubuntu: Confirmed Bug description: I can definitely confirm that Network Manager's OpenVPN is not working yet in Ubuntu 17.04. I set up my configuration via import: http://neartalk.com/ss/2017-03-29_001_633x332.png On all earlier versions of Ubuntu, after importing the configuration, I'm able to connect to the VPN. However, in 17.04, connection attempts always give this error immediately: "The VPN Connection disconnected because the VPN Service has stopped" Clearly the VPN Service has NOT stopped. I've confirmed that this error is false by taking the exact same import-file and I imported it into an Ubuntu 16.04 computer and then the VPN connected without issue. Also, with this same import-file I've had no issues in Ubuntu 16.10. So I've thoroughly confirmed that there is no issue with the VPN service. The issue is with the client in Ubuntu 17.04. I cannot upgrade to 17.04 until this is fixed. ProblemType: Bug DistroRelease: Ubuntu 17.04 Package: network-manager-openvpn-gnome 1.2.6-2ubuntu1 ProcVersionSignature: Ubuntu 4.10.0-14.16-generic 4.10.3 Uname: Linux 4.10.0-14-generic x86_64 ApportVersion: 2.20.4-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity:Unity7 Date: Wed Mar 29 05:25:14 2017 InstallationDate: Installed on 2017-01-30 (58 days ago) InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) SourcePackage: network-manager-openvpn UpgradeStatus: Upgraded to zesty on 2017-03-27 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1677198/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1294899] Re: Import saved VPN connection has been Recently Broken
tested package version: network-manager-gnome 0.9.8.8-0ubuntu4.1 I am now able to succesfully import openvpn profiles. I tested 5 profiles, all imported correctly. Also confirmed openvpn can be connected and disconnected from network-manager without issues. Thanks. please advise if more testing is needed. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager-applet in Ubuntu. https://bugs.launchpad.net/bugs/1294899 Title: Import saved VPN connection has been Recently Broken Status in The OpenVPN Virtual Private Network: Invalid Status in “network-manager-applet” package in Ubuntu: Fix Released Status in “network-manager-openvpn” package in Ubuntu: Invalid Status in “network-manager-applet” source package in Trusty: Fix Committed Status in “network-manager-openvpn” source package in Trusty: Invalid Status in “network-manager-applet” source package in Utopic: Fix Released Status in “network-manager-openvpn” source package in Utopic: Invalid Status in “network-manager-openvpn” package in Debian: New Bug description: SRU Request: [Impact] Attempting to import a saved VPN connection file results in a segault. This is regression in Ubuntu 14.04 that worked correctly in previous versions. [Test Case] 1- install network-manager-openvpn and network-manager-openvpn-gnome 2- from the network-manager indicator, click on Edit Connections 3- Click on Add 4- Select Import a saved VPN configuration, and open the file in comment #28 Expected results: a window should appear with the imported information Current results: network-manager's connection editor segfaults [Regression potential] This SRU simply adds a couple of missing sections to the 11-user-connections.patch patch that went missing. If the fix is broken, either the vpn files won't import, or creating a new vpn connection could break completely. Original description: I believe recent changes have broken network-manager-openvpn feature that allows you to Import saved VPN connection. I've tested this feature with bundles that I've definitely imported successfully in the past. Now, not only does it not import, but it gives absolutely no feedback at all; the window just disappears as though I didn't just ask it to import a VPN.conf file. The folder (I'm importing the .conf file from) includes all the necessary supporting files. I'm very sure this is not a user error on my part. I've done this several times in the past and I'm certain that the files (that are currently being ignored without dialog feedback) are exactly the same as they were when I was able to import successfully a few weeks ago. I've tested this on multiple machines that have Ubuntu 14.04 installed and fully updated. And, even if the files were indeed corrupted (which I'm certain they are not), the fact that the UI just disappears, instead of showing an error, is a bug within itself. Also, I'd like to point out, that I was able to set up this VPN bundle manually. The point of this bug is to report that the ability to import via .conf files (so that you don't have to set things manually) has recently became nonfunctional. To manage notifications about this bug go to: https://bugs.launchpad.net/openvpn/+bug/1294899/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1174936] Re: online-accounts-preferences crashes immediately when opened
I also have this issue. Oleksandr's workaround also helps, but if I launch online-accounts-preferences from terminal, the error is displayed even if panel opens. When this happens, I noticed that my icq plugin does not allow me to modify my account, the whole page is greyed out and the only thing I can do is remove the account. if I remove and re-add the account, I am still unable to enter account information. Not sure if it is related or a completely separate bug. ** Attachment added: icq fails to display account info https://bugs.launchpad.net/ubuntu/+source/gnome-control-center-signon/+bug/1174936/+attachment/3665460/+files/ubuntu-13.04-online-accounts-icq.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/1174936 Title: online-accounts-preferences crashes immediately when opened Status in “empathy” package in Ubuntu: Confirmed Status in “gnome-control-center-signon” package in Ubuntu: Confirmed Bug description: `online-accounts-preferences` crashes immediately when opened. It crashes when you launch it by first opening System Settings via the launcher then choosing Online Accounts as well as when you open it directly by choosing Online Accounts from the launcher. It also crashes immediately when opened by running the `online-accounts- preferences` command on the command line. Here's the output it gives: % online-accounts-preferences credentials-cc-panel-Message: cc-credentials-account-applications-model.vala:156: No valid plugin found for application 'shotwell' with account '1' credentials-cc-panel-Message: cc-credentials-account-applications-model.vala:156: No valid plugin found for application 'unity-scope-gdrive' with account '1' credentials-cc-panel-Message: cc-credentials-account-applications-model.vala:156: No valid plugin found for application 'unity-lens-photos' with account '1' ** ERROR:empathy-user-info.c:252:fill_contact_info_grid: assertion failed: (spec != NULL) Aborted ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Tue Apr 30 14:03:48 2013 InstallationDate: Installed on 2012-10-18 (194 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MarkForUpload: True ProcEnviron: TERM=xterm-color PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/usr/bin/zsh SourcePackage: gnome-control-center-signon UpgradeStatus: Upgraded to raring on 2013-04-26 (4 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/1174936/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
