Hi Joe,
Sorry if this is a dumb question, but is there some documentation around
what 2.0 might mean? My personal interest is in backwards compatibility of
existing custom processors.
Thanks,
Phil
On Tue, 10 Jan 2023 at 06:53, Joe Witt wrote:
> Team,
>
> As David mentioned in [1] following a
It might be too much to do prior to solving this problem, but for the
general case, but could NiFi benefit from a @Depricated annotation (or
similar) on PropertyDescriptor. This could be read only, requiring the
admin to change to the new property.
Alternatively, the deprecated property could be
Hi there,
Now that my environment is working nicely, I am working on SplitContent
(Nifi-1517).
Is there a way to tell maven to only compile and/or run the unit tests for the
SplitContent processor, rather than testing the entire nifi-standard-processors
bundle?
Thanks,
Phil
Oh, and maven on my laptop works fine now that it’s on my home WiFi and not
running via an iOS hotspot.
Go figure...
> On 7 Apr 2022, at 4:34 pm, Phil H wrote:
>
> Upgraded to Azul JDK11 on my VM and 1.17.0 now runs!
>
> I am re-running the full mvn clean install process
in, and apologies to everyone else for
the spam.
Now to get on with contributing to the project (I hope).
Phil
On Thu, Apr 7, 2022 at 11:55 AM Phil H wrote:
> So I just compiled and executed the simplest HTTP program I could find
>
>
> import java.io.IOException;
> import java.ne
?
>
> Running the following OpenSSL command will attempt a socket connection with
> TLS to the Maven repository server, to check connectivity:
>
> openssl s_client -host repo1.maven.org -port 443
>
> Regards,
> David Handermann
>
> On Wed, Apr 6, 2022 at 8:31 PM Phil H w
No issue running the openssl command. I’m just on my personal laptop
connecting via my hotspotted phone - I’ve never had any sort of network type
issues like this before. That’s why I wondered whether it was somehow
maven/java related.
Makes no sense to me!
> On 7 Apr 2022, at 11:40 am,
On 7 Apr 2022, at 11:27 am, David Handermann
> wrote:
>
> Phil,
>
> Can you provide the version of Maven you are using? Running Maven with the
> -X argument for debug will generate a lot of logging information, but it
> might point to the POM resolution problem.
>
> Regards,
Could be something funky with how Java 17's TLS APIs are working on your
> setup.
>
> Java 8 and Java 11 are your best bets for now anyway. Java 17 support
> is still in the early stages and isn't a preferred JDK/JRE.
>
> On Wed, Apr 6, 2022 at 7:00 PM Phil H wrote:
>>
So I upgraded to the Azul JDK 17. New repo, following the same instructions as
before.
phil@Phils-MacBook-Pro nifi % mvn -T C2.0 clean install -Pinclude-grpc
[INFO] Scanning for projects...
Downloading from central:
tography Extension Policy. Upgrading to the latest
> > Java 8 version should resolve the illegal key size issue shown in the
> > build.
> >
> > Regards,
> > David Handermann
> >
> > On Wed, Apr 6, 2022 at 6:16 AM Phil H wrote:
> >
> > > Austral
Australia. Never had any other issues with OpenSSL stuff, etc
On Wed, 6 Apr 2022 at 21:11, Otto Fowler wrote:
> What country are you in? Are you under export controls?
>
> From: Phil H
> Reply: dev@nifi.apache.org
> Date: April 6, 2022 at 07:08:45
> To: dev@nifi.apac
ption: Illegal key size
at
org.apache.nifi.security.kms.FileBasedKeyProviderTest.getSecretKeysPath(FileBasedKeyProviderTest.java:60)
at
org.apache.nifi.security.kms.FileBasedKeyProviderTest.testGetKey(FileBasedKeyProviderTest.java:47)
On Wed, Apr 6, 2022 at 5:08 PM Phil H wrote:
> Hi guys,
, 2022 at 2:31 PM James Srinivasan <
> james.sriniva...@gmail.com>
> wrote:
>
> > Possibly not your problem, but did you follow the instructions for
> building
> > on Windows here:
> >
> > https://nifi.apache.org/quickstart.html
> >
> > On Tue, 5
> Too many builds in different levels are leaving things around.
>
> Thanks
>
> On Mon, Apr 4, 2022 at 7:46 AM Phil H wrote:
>
> > So, about that error that flashed past...
> >
> > [INFO]
> > ---
> Thanks
>
> On Mon, Apr 4, 2022 at 7:46 AM Phil H wrote:
>
> > So, about that error that flashed past...
> >
> > [INFO]
> >
> > [INFO] BUILD FAILURE
> > [INFO]
> >
xls
=
-- some binary stuff --
On Tue, Apr 5, 2022 at 12:30 AM Phil H wrote:
> Thanks Joe, it seems to be about half way through now - much further than
> previously. I thought I saw some red text flash past, but nothing
> stopped. Does
- build it all, run contrib check, and use all the
> cores.
>
> Thanks
>
> On Mon, Apr 4, 2022 at 6:38 AM Mike Thomsen
> wrote:
>
> > Did you run "mvn install" from the root of the project before
> > attempting to run a full test of the code base?
> >
>
in mind you should go for it.
> Sounds interesting.
>
> Thanks
>
> On Wed, Mar 16, 2022 at 3:59 PM Phil H wrote:
>
> > Hi,
> >
> > This seems like an odd omission - aside from performance (presumably?) is
> > there a reason why there isn’t a regex optio
25)
Re-running resulted in the same failure a second time (points for
consistency!), but I'm not sure what to do about this one.
Phil
On Mon, Apr 4, 2022 at 11:38 PM Mike Thomsen wrote:
> Did you run "mvn install" from the root of the project before
> attempting to run a full t
2\database\migration\H2DatabaseMigrator.java:[37,49]
error: cannot find symbol
[ERROR] symbol: class JdbcDataSource
[ERROR] location: class H2DatabaseMigrator
On Sat, Apr 2, 2022 at 10:20 PM Phil H wrote:
> Hi there,
>
> Trying to build the nifi git repo for the first time and I'm getting the
Hi there,
Trying to build the nifi git repo for the first time and I'm getting the
message below
I'm used to working in offline development environments, so I'm a bit lost
with this online dependency stuff. I note that
https://repository.apache.org/snapshots/org/apache/nifi/ doesn't contain
any
ve a good implementation in mind you should go for it.
> Sounds interesting.
>
> Thanks
>
> On Wed, Mar 16, 2022 at 3:59 PM Phil H wrote:
>
> > Hi,
> >
> > This seems like an odd omission - aside from performance (presumably?) is
> > there a reason why
Hi,
This seems like an odd omission - aside from performance (presumably?) is
there a reason why there isn’t a regex option for the byte sequence? I need
one but thought I’d ask before I built my own.
Thanks
Phil
Hi there,
I am in the process of trying to upgrade from 13.2 to 15.1. I did not have
a sensitive props key set previously. Based on the upgrade guide, I ran
nifi.sh set-sensitive-properties-key APassword
When I ran nifi, it was complaining about a lack of specified algorithm. I
ran up a new
ep 1, 2021 at 7:56 PM Phil H wrote:
>
> > Hi Joe,
> >
> > It’s a custom one, but it is effectively just a routing filter component
> > (read the data, send the flow file out on relationship A or B based on
> what
> > it finds). Nothing exotic in terms of how it int
.
Phil
> On 2 Sep 2021, at 12:02 pm, Joe Witt wrote:
>
> Phil
>
> What processor reads from that queue that appears unmoving?
>
> Thanks
>
> On Wed, Sep 1, 2021 at 3:51 PM Phil H wrote:
>
>> And once reconnected again, no data passes that queue - it all jus
And once reconnected again, no data passes that queue - it all just piles
up there (the queue count matching the number of items sent into the
cluster). However if I try and list the queue, it claims there are no files
in it. Very very confused!
On Thu, 2 Sep 2021 at 08:39, Phil H wrote:
> O
t it down.
>
> Thanks
> Shawn
>
> -Original Message-
> From: Phil H
> Sent: Wednesday, September 1, 2021 4:36 PM
> To: dev@nifi.apache.org
> Subject: Primary node vs shutdown
>
> Hi there,
>
> I am noticing a number of situations where shutting down
you
> have NiFi's cluster load balancing setup. Then you'd disconnect the node
> and shut it down.
>
> Thanks
> Shawn
>
> -Original Message-
> From: Phil H
> Sent: Wednesday, September 1, 2021 4:36 PM
> To: dev@nifi.apache.org
> Subject: Primary node vs shut
Hi there,
I am noticing a number of situations where shutting down one node in a
cluster is leaving data stranded in the flows on that shut down server.
Is there any way to tell NiFi to ship data off to other cluster members
before it shuts down? Note I am restarting via the nifi.sh script, not
as to your
> thought process and design approach.
>
> OK, I'll step off a little, because I might be probing too hard here. But I
> was legitimately curious about the intention of the proposed processor as
> it relates to the mentioned Diode device.
>
> Thanks,
>
> Adam
Hi Marc,
Thanks for the additional info. Just so you know you’re not the only
one, I’ve also had to re-implement a ListenTCP alternative to get
around the byte delimeter issue for binary and multiline text data.
Phil
On Tue, Aug 3, 2021 at 6:59 AM Marc wrote:
>
> Hi Adam,
>
> more or less it
That is interesting stuff - out of interest, if it was sent over that UDP
diode, how would you know whether or not it got to the other side? I
haven’t looked into the site-to-site functionality much yet but I assume it
maintains the providence info?
On Mon, 2 Aug 2021 at 04:26, Marc wrote:
>
://github.com/TouK/plumber
>
>
>
> Tony Koval
>
>
>
> On 2021/07/22 03:25:31, Phil H mailto:g...@gmail.com>> wrote:
>
>> Hi there,>
>
>>
>
>> I use the built in unit tests in the maven processor archetype for each of>
>
&g
Hi there,
I use the built in unit tests in the maven processor archetype for each of
my processors, but I would like to set up some integration testing using
multiple processors.
Is this possible? If so, anyone care to sling me some example code? Eg: say
I wanted to run a test connecting
t; verification:
>
> https://square.github.io/okhttp/changelog_3x/#version-3100
>
> Regards,
> David Handermann
>
> On Thu, Jun 10, 2021 at 11:16 PM Phil H wrote:
>
> > Hi there,
> >
> > I upgraded an older dev setup today from 1.6.0 to 1.13.2. After a
Hi there,
I upgraded an older dev setup today from 1.6.0 to 1.13.2. After a
couple of config tweaks, it’s “working”, but if I try and access the
interface at https://nifi2.domain.blah/ I get a message on screen
stating that nifi1.domain.blah is not verified. The logs contain this
same message,
gt; threads, and relax some of the timeouts.
>
> nifi.cluster.protocol.heartbeat.interval=
> nifi.cluster.node.protocol.threads=
> nifi.cluster.node.protocol.max.threads=
> nifi.cluster.node.connection.timeout=
> nifi.cluster.node.read.timeout=
> nifi.cluster.node.max.concurrent.requests=
>
>
gt; Also, is NiFi using its own dedicated zookeeper or is it shared with other
> services? How many nodes is the zookeeper?
>
>
>
> > On Jun 2, 2021, at 7:54 PM, Phil H wrote:
> >
> > Hi there,
> >
> > I am getting a lot of these both in the web interface to
Hi there,
I am getting a lot of these both in the web interface to my servers, and in
the cluster communication between the nodes. All other aspects of the
servers are fine. TCP connections to NiFi, as well as SSH connections to
the servers are stable (running for days at a time). I’m lucky if I
a NFS share, the only way is to mount the share on the nifi nodes.
>
> Regards,
>
> Eduardo Fontes
>
> Em qui., 13 de mai. de 2021 01:11, Phil H escreveu:
>
> > Hi there,
> >
> > I want to use PutFile write some flow files out to a network drive o
Hi there,
I want to use PutFile write some flow files out to a network drive on my
Unix system, but fail if the disk is not mounted. I can’t see any way to do
this - any ideas?
Cheers,
Phil
and see what that shows.
>
>
>
> Sent from my iPhone
>
>
>
> > On Sep 20, 2020, at 8:30 PM, Phil H wrote:
>
> >
>
> > Various numbers - max of 96 so far.
>
> >
>
> >> On Sat, 19 Sep 2020 at 21:44, Pierre Villard <
> pierre.vi
Various numbers - max of 96 so far.
On Sat, 19 Sep 2020 at 21:44, Pierre Villard
wrote:
> How many concurrent tasks did you set on the two custom processors?
>
>
>
> Le sam. 19 sept. 2020 à 02:16, Phil H a écrit :
>
>
>
> > Basically I have two custom processors
s.
>
> Actually, I usually recommend changing the pool size only when you see that
>
> all the threads available are used.
>
> Overall we'd need more details about your flow and observations.
>
>
>
> Thanks,
>
> Pierre
>
>
>
> Le ven. 18 s
Hi there,
Regardless of what I set in the maximum thread count settings, I never see
more than 128 active threads. The CPU load of the system is only 5-8% when
NiFi is running at this rate. It’s a Solaris system with 64 cores.
Any help getting more performance would be appreciated!
Regards,
If I have more than one thread running for a PutTCP processor, it seems to
add nearly 1 second of latency, even when I am only sending a single flow
file through my system.
This multiplexing does increase the total throughout of my system (items
per hour) but this latency is hard to explain.
Any
PGP Fingerprint: 70EC B3E5 98A6 5A3F D3C4 BACE 3C6E F65B 2F7D EF69
>
> > On Jun 4, 2020, at 4:45 PM, Phil H wrote:
> >
> > The action is available in the menu. I get the following pop up:
> >
> > *Insufficient Permissions*
> >
> > *Node nifiX.domain.com:443 &
5A3F D3C4 BACE 3C6E F65B 2F7D EF69
>
> > On Jun 4, 2020, at 4:45 PM, Phil H wrote:
> >
> > The action is available in the menu. I get the following pop up:
> >
> > *Insufficient Permissions*
> >
> > *Node nifiX.domain.com:443 <http://nifiX.doma
70EC B3E5 98A6 5A3F D3C4 BACE 3C6E F65B 2F7D EF69
>
> > On Jun 4, 2020, at 4:22 PM, Phil H wrote:
> >
> > Hi guys,
> >
> > So I checked this morning, and the users are members of a group that has
> > “modify the data” permission at the root level (and i
roxied
> > from the node being used to access the UI out to the remaining nodes.
> >
> > -Mark
> >
> >
> > On Thu, Jun 4, 2020 at 6:52 AM Phil H wrote:
> >
> > > Hi Andy,
> > >
> > > Thanks for your reply. I don’t recall seein
; PGP Fingerprint: 70EC B3E5 98A6 5A3F D3C4 BACE 3C6E F65B 2F7D EF69
>
> > On Jun 3, 2020, at 4:08 PM, Phil H wrote:
> >
> > Hi there,
> >
> > I am trying to stratify my userbase. I need to allow certain users/groups
> > the ability to clear queues, but cannot fin
Hi there,
I am trying to stratify my userbase. I need to allow certain users/groups
the ability to clear queues, but cannot find the right policy to allow that
without also allowing them to delete queues, which I absolutely don’t want
to do.
Am currently using 1.9.2 (putting off the upgrade
s.Processor
>
> -Mark
>
>
> On Sun, Dec 15, 2019 at 6:09 PM Phil H wrote:
>
> > Hi there,
> >
> > I have a working processor, Tom, which I cloned to form a second
> processor,
> > Jerry. All occurrences of Tom in the code/XML were replaced with Jerry in
>
Hi there,
I have a working processor, Tom, which I cloned to form a second processor,
Jerry. All occurrences of Tom in the code/XML were replaced with Jerry in
the clone. The build process works for Jerry fine, as do the unit tests.
However when I load the Jerry into the nifi extensions
"
> then this is what controller services are designed to accommodate but it is
> really important you're careful here as shared state like that is where
> bottlenecks can occur. Most controller services are meant for a write
> once/read many type pattern.
>
> Thanks
>
&g
quite common in many processors.
>
> Thanks
>
> On Sun, Dec 8, 2019 at 7:30 PM Phil H wrote:
>
> > Hi there,
> >
> > I have a custom processor that I want to contain some shared data across
> > threads (this data is based on analysis of flow files, so constantly
Hi there,
I have a custom processor that I want to contain some shared data across
threads (this data is based on analysis of flow files, so constantly
changing). I can’t use a static variable though, because I use the same
processor more than once within my flow in different contexts. If there
> processor on all nodes, not primary node, because it may not be the primary
> node that receives the data.
>
> Thanks
> -Mark
>
> Sent from my iPhone
>
> > On Dec 5, 2019, at 9:04 PM, Phil H wrote:
> >
> > Hi there,
> >
> > I hav
Hi there,
I have a GetTCP processor running on both members of my cluster. I want to
force data received by both to a processor running on a single node. At the
moment, if I set that processor to run on only the primary, the queue from
the GetTCP processor on the secondary node just fills up.
you sure that the certificates have valid SubjectAlternativeName
> entries for the proper hostnames?
>
> Andy LoPresto
> alopre...@apache.org
> alopresto.apa...@gmail.com
> PGP Fingerprint: 70EC B3E5 98A6 5A3F D3C4 BACE 3C6E F65B 2F7D EF69
>
> > On Dec 3, 2019, at 7:53 PM
Hi there,
I (almost) have a secure nifi 1.9.2 cluster of two servers. Server A starts
up fine, but Server B fails to start with this error (I cannot copy/paste
as it is an offline system)
Could not start listening for incoming connections in order to load balance
data across the cluster. Please
ps://nifi.apache.org/docs/nifi-docs/html/administration-guide.html#proxy_configuration
> >
>
> Best regards,
> Endre
>
>
> > On 7 Nov 2019, at 03:49, Phil H wrote:
> >
> > Hi there,
> >
> > We have two addresses on each of our NiFi cluster
Hi there,
We have two addresses on each of our NiFi cluster hosts. One is externally
facing, which we use to access the UI, and connect to receiving processors
from the wider network. We are trying to configure NiFi to use the internal
network for its cluster traffic. However if I use the
memory, disks), number of nodes in the cluster, JVM heap size,
> configuration of repositories, specific processors that are bottle necks,
> etc.
>
> On Tue, Oct 23, 2018 at 10:02 PM Phil H wrote:
>
> > Yep - although it now has less throughput with 8 threads than it
> > p
Das wrote:
>
> Did you increase the no. of Concurrent Tasks and Run Duration on slow
> processors ?
>
> Thanks,
> Milan Das
>
> On 10/23/18, 8:26 PM, "Phil H" wrote:
>
>Hi team,
>
>My NiFi is struggling to process data (lots of back pres
Hi team,
My NiFi is struggling to process data (lots of back pressure in various
queues) but it is only using a very small amount (2-5%) of CPU according to
top.
Any ideas?
kind but it
looks like it's not:
http://zookeeper.apache.org/doc/r3.4.3/zookeeperStarted.html#sc_RunningReplicatedZooKeeper
On 10/2/18, 5:17 PM, "Phil H" wrote:
The second port in the zookeeper server config has been a mystery to me. I
thought it was a second port used for
.port=9551
- nifi.cluster.node.address=nifi2.com
- nifi.cluster.node.protocol.port=11441
nifi2/state/zookeeper
/myid (file contents = "2")
/state-management.xml (no changes required)
/version-2/
Nathan
On 10/2/18, 2:07 AM, "Phil H" wrote:
Hi Andy,
Thanks for the addition
://pierrevillard.com/2016/08/13/apache-nifi-1-0-0-cluster-setup/
[2]
https://pierrevillard.com/2016/11/29/apache-nifi-1-1-0-secured-cluster-setup/
Andy LoPresto
alopre...@apache.org
alopresto.apa...@gmail.com
PGP Fingerprint: 70EC B3E5 98A6 5A3F D3C4 BACE 3C6E F65B 2F7D EF69
On Oct 1, 2018, at 2:45 PM, Phil H
uses Zookeeper and how to configure it here:
https://nifi.apache.org/docs/nifi-docs/html/administration-guide.html#state_management.
Let us know what happens once these properties are configured correctly.
Nathan
On 9/30/18, 11:07 PM, "Phil H" wrote:
Hi guys,
Pulling m
Hi guys,
Pulling my hair out trying to solve my Zookeeper problems. I have two 1.6.0
servers that I am trying to cluster.
Here is the except from the properties files – all other properties are default
so omitted for clarity. The servers are set up to run HTTPS, and the
interface works via
. If iostat
shows always 100% usage then prob things arent ideal.
thanks
On Thu, Sep 13, 2018, 9:16 PM Phil H wrote:
> Hi joe,
>
> I moved the content and providence repositories off to two new disks, but
> it seems like the vast majority of the writes are still occurring on the
, 14 Sep 2018 at 12:37, Joe Witt wrote:
> if they are physically seperate the diff should be quite noticable.
>
> On Thu, Sep 13, 2018, 7:36 PM Phil H wrote:
>
> > Potentially. We're looking to see how the multiple disks help before
> > committing to spending money on new ha
ore involved.
>
> does that help?
>
> thanks
>
> On Thu, Sep 13, 2018, 4:36 PM Phil H wrote:
>
> > Follow up question - how do I transition to this new structure? Should I
> > shut down NiFi and move the contents of the legacy single directories
> into
> >
te to the content repo is 400 MB/sec). Similar with
> Provenance Repository.
>
> Doing this also will allow you to hold a larger 'archive' of content and
> provenance data, because
> it will span the archive across all of the listed directories, as well.
>
> Thanks
> -Mark
>
>
gt; writing 100 MB/sec, then
> your effective write rate to the content repo is 400 MB/sec). Similar with
> Provenance Repository.
>
> Doing this also will allow you to hold a larger 'archive' of content and
> provenance data, because
> it will span the archive across all of the listed
disk
> caching, which
> can certainly speed things up, especially if you're reading the content
> several times for
> each FlowFile.
>
> Does this help at all?
>
> Thanks
> -Mark
>
>
> > On Sep 10, 2018, at 6:05 AM, Phil H wrote:
> >
> > Thanks for tha
nna
>
> On Mon, Sep 10, 2018 at 4:09 AM Phil H wrote:
>
> > Hi all,
> >
> > I've been asked to spec some hardware for a NiFi installation. Does
> anyone
> > have any advice? My gut feel is lots of processor cores and RAM, with
> less
> > emphasis on stor
Hi all,
I've been asked to spec some hardware for a NiFi installation. Does anyone
have any advice? My gut feel is lots of processor cores and RAM, with less
emphasis on storage (small fast disks). Are there any limitations on how
many cores the JRE/NiFi can actually make use of, or any other
Hi there,
Is there a way to plot graphs longer than 24 hours? We are interested in
seeing things that happen over the course of a week or so
Thanks,
Phil
gt;
> then you can start things until you find the problem.
>
> thanks
>
> On Tue, Jul 3, 2018, 8:31 PM Phil H wrote:
>
> > Hi guys,
> >
> > I got a backlog, noticed degraded performance, restarted NiFi, and now
> the
> > web UI won't start. I not
Hi guys,
I got a backlog, noticed degraded performance, restarted NiFi, and now the
web UI won't start. I note that I am getting lots of out of memory errors
in the log.
Is there a way I can clear the backlog from outside the application
(deleting files, etc)?
TIA,
Phil
better (UI is responsive, and no errors or
warnings) but the main GetTCP only seems to be spitting out flowfiles about
1/3rd as fast as it used to (network factors have been eliminated).
Any more ideas?
On Tue, 15 May 2018 at 09:36, Phil H <gippyp...@gmail.com> wrote:
> Thanks Mark,
>
>
roperty from "org.apache.nifi.provenance.PersistentProvenanceRepository"
> to "org.apache.nifi.provenance.WriteAheadProvenanceRepository".
> The new implementation provides better throughput, will avoid the
> problematic pauses that you're encountering now,
> and also is quite a bit faster
Hi gang,
I have started receiving this error after perhaps 24 hours of run time. The
first queue in our flow has a very large backlog by the time this error
arrives. What is odd is that the incoming message rate is fairly constant
at all times and while I am watching NiFi during the day, we never
usual mistake is to fix the
> authorizers.xml file but not delete users.xml and authorizations.xml files
> before restarting. Could it be the case here?
>
> Pierre
>
> 2018-05-05 6:36 GMT+02:00 Phil H <gippyp...@gmail.com>:
>
> > No worries Andy,
> >
> > I
Server-76]
o.a.n.w.s.NiFiAuthenticationFilter Attempting request for
(EMAILADDRESS=phil@blah, CN=Phil H, OU=Blah) GET
https://nifi1.blah/nifi-api/flow/current-user (source ip: 192.168.10.192)
2018-05-05 14:10:29,310 INFO [NiFi Web Server-76]
o.a.n.w.s.NiFiAuthenticationFilter Authentication success for
EMAILADDRESS
ave the "Insufficient permissions" problem,
which there is loads of documentation as to how to move forwards.
Thanks!
Phil
On Sat, May 5, 2018 at 8:27 AM, Phil H <gippyp...@gmail.com> wrote:
> Further info
>
> In the httpd installation, I need the private key for the certi
sed PKCS12 for the keystore was some Jetty debug output
telling me that was preferred to JKS. Interestingly it gave me contrary
advice for the trust store.
On Sat, 5 May 2018 at 08:22, Phil H <gippyp...@gmail.com> wrote:
> Hi Andy,
>
> Sorry - poor use of words (it was late when I wrote the emai
e...@apache.org
> *alopresto.apa...@gmail.com <alopresto.apa...@gmail.com>*
> PGP Fingerprint: 70EC B3E5 98A6 5A3F D3C4 BACE 3C6E F65B 2F7D EF69
>
> On May 4, 2018, at 4:03 AM, Phil H <gippyp...@gmail.com> wrote:
>
> Hi all,
>
> I am trying to secure my NiFi inst
Hi all,
I am trying to secure my NiFi installation. I have a client certificate
(nifi1.crt) and the CA for the intranet (ca.crt). I created the trust and
keystores as below:
keytool -import -trustcacerts -alias nifi1 -file nifi1.crt -keystore
server_keystore.p12 -storetype PKCS12
keytool
Hi there,
I am getting regular (maybe every ten minutes?) crashes in NiFi 1.3.0. This
just started happening unrelated to any change to the software environment
(i.e.: we haven't installed new code/processors).
It roughly coincides with an increase in flow file throughout and my
subsequent use
te in the UI and view the REST calls made.
>
> Hope that helps.
>
> Robert
>
>> On Mon, Jan 29, 2018, 21:31 Phil H <gippyp...@gmail.com> wrote:
>>
>> Hi there,
>>
>> I need to add new properties/routes to RouteOnAttribute and subsequent
>> PutFil
Hi there,
I need to add new properties/routes to RouteOnAttribute and subsequent PutFile
processors based on an external input (a basic web interface).
Hoping someone can point me in the right direction in terms of either config
files to change, or API calls to make to simulate what the NiFi
processors like
>> UnpackContent and QueryRecord that explicitly call
>> ProvenanceReporter.fork().
>>
>> Regards,
>> Matt
>>
>>> On Mon, Nov 20, 2017 at 4:32 PM, Phil H <gippyp...@gmail.com> wrote:
>>> Hi team,
>>>
>
> Matt
>
>> On Mon, Nov 20, 2017 at 4:32 PM, Phil H <gippyp...@gmail.com> wrote:
>> Hi team,
>>
>> If I have a processor that takes one input flow file, and then generates
>> many flow file outputs as a result (say, one output per line from a
>> mul
Hi team,
If I have a processor that takes one input flow file, and then generates many
flow file outputs as a result (say, one output per line from a multi-line input
file), how do I indicate the provenance of the new flow files? I would like to
see where they have come from for
first person to ever make that mistake.
>
> Nope, not true :) No worries and thanks for following up. I believe
> once we have the extension registry in play this sort of thing will be
> much easier/simpler.
>
> Thanks
>
>> On Mon, Nov 6, 2017 at 1:20 PM, Phil H <gippyp
1 - 100 of 107 matches
Mail list logo