Re: [VOTE]: Release Apache OpenOffice 4.1.0 (RC)
+1 On Fri, Apr 4, 2014 at 6:17 PM, Yuzhen Fan fanyuz...@gmail.com wrote: [X] +1 Release this package as Apache OpenOffice 4.1.0 On Fri, Apr 4, 2014 at 4:22 PM, Edwin Sharp el...@mail-page.com wrote: +1 On Thu, Apr 3, 2014, at 10:56, Jürgen Schmidt wrote: Hi all, this is a call for vote on releasing the available release candidate (RC) as Apache OpenOffice 4.1.0. Apache OpenOffice 4.1 is a minor update with many bugfixes and at least 2 major improvements. It's the first version where we have the iAccessibility2 support integrated and available. A very huge step forward to reach and better support disabled users especially on Windows. The second improvement is the switch to 64 bit on MacOS. A long and overdue must do shift forward to support newer APIs (replace deprecated APIs) and platforms on MacOS. And we can provide again more complete UI translations and have now support for 38 languages. New languages for this release compared to 4.0.1 are Bulgarian, Danish, Hebrew, Hindi, Norwegian Bokmal and Thai. Apache OpenOffice 4.1 will be a further key milestone to continue the success of OpenOffice. An overview of the integrated release issues can be found under: http://people.apache.org/~jsc/milestones/4.1.0-rc/AOO4.1.0_RC_fixes.html The release candidate artifacts (1) (source release, as well as binary releases for 38 languages) and further information how to verify and review Apache OpenOffice 4.1.0 can be found on the following wiki page: https://cwiki.apache.org/confluence/display/OOOUSERS/Development+Snapshot+Builds The RC is based on the release branch AOO410, revision 1583666! And a fresh and clean RAT scan output of this revision can be found under http://people.apache.org/~jsc/milestones/4.1.0-rc/AOO4.1.0_RAT_Scan.html Please vote on releasing this package as Apache OpenOffice 4.1.0 The vote starts now and will be open until: Sunday evening, 6 April: 2014-04-06 11:00pm UTC. But we invite all people to vote (non binding) on this RC. We would like to provide a release that is supported by the majority of our project members. [ ] +1 Release this package as Apache OpenOffice 4.1.0 [ ] 0 Don't care [ ] -1 Do not release this package because... (1) the upload for the Linux 32 bit artifacts is still ongoing, but 64 bit is already available. - To unsubscribe, e-mail: qa-unsubscr...@openoffice.apache.org For additional commands, e-mail: qa-h...@openoffice.apache.org - To unsubscribe, e-mail: qa-unsubscr...@openoffice.apache.org For additional commands, e-mail: qa-h...@openoffice.apache.org -- Regards, Yu Zhen
Re: Newbie to openoffice
Hi, KAMINI Welcome to join in QA team If you have interest on AOO 4.1 FVT, please send your platform and Testlink ID (if you haven't a Testlink account, you can register one[1]), and I will assign test cases to you. You should also get installation sets from dev snapshot [2] and report issues in Bugzilla [3] [1]http://aootesting.adfinis-sygroup.org/index.php [2]http://ci.apache.org/projects/openoffice/#linsnap [3] https://issues.apache.org/ooo/ Thank you! On Thu, Jan 30, 2014 at 5:21 PM, Kamini Bonde kamini.bend...@gmail.comwrote: Hi, I am kamini from India.I am an engineering graduate and have been working in the field of software Testing since 5 years. I found openoffice to be quite exciting as its an open source application development. Looking forward to join the QA team so I learn more on testing and an opportunity to work with people around the globe. Regards, Kamini.
Re: crash p1 bug, data loss - openoffice
Hi,Sam I try to reproduce your issue on AOO4.1 and AOO4.0 (AOO400m3(Build:9702) - Rev. 1503704)presentation and writer on Windows7 ，but fail to reproduce Can you provide which product : presentation or writer , AOO4.0.0 version build information ,which will be helpful for us to reproduce your issue Thanks On Sat, Jan 25, 2014 at 5:58 PM, Marcus (OOo) marcus.m...@wtnet.de wrote: Am 01/25/2014 04:45 AM, schrieb Sam Jennings: I have uncovered a bug in openoffice on windows 7, 64 pro Openoffice 4.0.0 To reproduce this bug, make a table with 3 rows and 3 columns (maybe other numbers would work as well) now merge the top row's cells now select a column beneath that merged row, and delete it. that should crash openoffice and lose all your data. workaround? nothing fast. sorry, it's easier to mail your dev than painstakingly drudge your website for the bug database and try to get past whatever prescreening it undoubtedly has. but great free software guys...but please fix that! it's a priorty 1...crash data loss. Thanks for telling us the problem. However, it's better suited in our bugtracker. So, please report it here: https://issues.apache.org/ooo/ Thanks Marcus - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: Interest in Volunteering With the OpenOffice Project
Welcome Tyler， IA2 also support AOO Sidebar, already integrated with trunk as rev 1542312 (Build download: http://ci.apache.org/projects/openoffice/) So we need to support AOO Sidebar IA2 testing work, focus FVT scenario IAccessible2 testing on Windows Platform There are 514 test cases about sidebar in testlink( http://aootesting.adfinis-sygroup.org/index.php) , And you can refer Sidebar FVT scenario(refer FVT Sidebar test case in testlink,jpg) and detailed test case(*AOOTest-1885*), adopt Screen Reader Tools(JAWS/NVDA) to cover more scenario In current ,We had already created and executed 30 ACC Sidebar test cases in testlink (refer ACC Sidebar test case in testlink,jpg) If any test case fails , please mark it failed with bugs opening to address [Accessibility][IA2] https://issues.apache.org/ooo/show_bug.cgi?id=123660 issue in bugzilla I create public query defect link for IA2 https://issues.apache.org/ooo/buglist.cgi?cmdtype=runnamednamedcmd =IA2list_id=105314 Welcome to question if you have any question On Mon, Jan 13, 2014 at 5:47 PM, Yuzhen Fan fanyuz...@gmail.com wrote: Hi Tyler, welcome to the project! Liuping Tan(doneyours...@gmail.com) has executed IA2 testing on BVT level test cases and FVT(Sidebar) level testcases, you can also contact her for information exchange when you do testing on IA2. On Thu, Jan 9, 2014 at 5:54 AM, Rob Weir robw...@apache.org wrote: On Sun, Jan 5, 2014 at 9:09 PM, Tyler Kavanaugh tw...@kc.rr.com wrote: Hello all: My name is Tyler Kavanaugh, and I am from Kansas, in the United States. I would very much like to be a part of the OpenOffice project, with a focus on QA/accessibility, as I am a blind user who uses screen-access software to accomplish everyday tasks on the computer. I am aware that the product recently (as of November or December 2013) finished its implementation of MSAA/IAccessible2, and this has piqued my interest. Where would you all suggest that I start? Hi Tyler, welcome to the project. Others have already sent you some good info. At the risk of overloading you with info, here's another resource you might want to review, our New Volunteer Orientation modules: http://openoffice.apache.org/orientation/ For QA specifically there is this orientation module: http://openoffice.apache.org/orientation/intro-qa.html It has some useful information on bug handling and will lead you to sign up for a Bugzilla account, etc. Regards, -Rob Thanks, -Tyler - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org -- Regards, Yu Zhen
I can't edit in cwiki.apache.org , Can someone help me add edit right for me
Username:doneyourself
[Accessibility] Call for volunteer for AOO IAccessible2 Testing
Hi All, IA2 branch sucessfully integrated with trunk as rev 1542312 (Build download: http://ci.apache.org/projects/openoffice/) We need more volunteers to support AOO IA2 testing work, focus FTV scenario IAccessible2 testing *Test execution:* 1. Testing of FVT scenario IAccessible2 testing on Windows, I create 3 testcase (*AOOTest-1758/1766/1768*) in testlink (http:// aootesting.adfinis-sygroup.org/index.php) For example: AOOTest 1768-Support Object information and display Accessibility for AOO Calc Summary: Accessibility Checklist: Visual focus indicator Information about user interface objects Labels Text Scenario: AOO Calc function list (refer sample file) AT Support: Reference :https://wiki.openoffice.org/wiki/Accessibility Windows, Screen Reader Tools JAWS NVDA (open source) If any test case fails , please mark it failed with bugs openning to address [Accessibility][IA2] https://issues.apache.org/ooo/show_bug.cgi?id=123660 issue in bugzilla *Defect summary:* I create public query defect link for IA2 https://issues.apache.org/ooo/buglist.cgi?cmdtype=runnamednamedcmd =IA2list_id=105314 1. We need volunteers to confirm unconfirmed defects and verify fixed defects 2. Call for more developer to involve in fixing defects *Issues quality highlight:* 1. BVT Passed on branch version 2. Possible Impacted Area according by Steve: UI, document editing area, graphic objects. And no visible changes will be made to dialogs. Another possible area will be affected is stability. *Volunteer status: * We have two new volunteers(Buddy Brannan/Martin Courcelles) interested in testing, 3 person had already worked for branch version if you have interest in joining the bug work, please let me know your Bugzilla ID you have . If you want to contribute to test in testlink , please send me your TestLinkID I will assign test cases to you. Thanks you all for effort
Re: Re : [Accessibility] Call for volunteer for AOO IAccessible2 Testing
Hi, Welcome to AOO IAccessible2 Testing Now we have three geneal AVT test cases in testlink and need more volunteers to write and test detail AVT test cases, To support AVT , we may make use of existing FVT General Testing List (FVT scenario) to support AVT Such as : 1.Launch AOO and new a presentation.(FVT scenario) , 2.Select Help - About Openoffice on main menu by keyboard..(FVT scenario) , 3.Launch Windows Screen Reader Tools and check AVT checkpoint (AVT testing) Please feel free to let me know if any question On Mon, Nov 18, 2013 at 8:41 PM, mengualjean...@free.fr wrote: Hi All, Hi IA2 branch sucessfully integrated with trunk as rev 1542312 (Build download: http://ci.apache.org/projects/openoffice/) First of all, thanks very much. I can say that it works for me. I do not have the issues I mentioned here to access, at least minimum, to OOo. great! We need more volunteers to support AOO IA2 testing work, focus FTV scenario IAccessible2 testing FTV? FVT? What is it? Sorry I am not an expert in the processes of such big projects. *Test execution:* 1. Testing of FVT scenario IAccessible2 testing on Windows, I create 3 testcase (*AOOTest-1758/1766/1768*) in testlink (http:// aootesting.adfinis-sygroup.org/index.php) For example: AOOTest 1768-Support Object information and display Accessibility for AOO Calc Summary: Accessibility Checklist: Visual focus indicator Information about user interface objects Labels Text Scenario: AOO Calc function list (refer sample file) AT Support: Reference :https://wiki.openoffice.org/wiki/Accessibility Windows, Screen Reader Tools JAWS NVDA (open source) If any test case fails , please mark it failed with bugs openning to address [Accessibility][IA2] https://issues.apache.org/ooo/show_bug.cgi?id=123660 issue in bugzilla *Defect summary:* I create public query defect link for IA2 https://issues.apache.org/ooo/buglist.cgi?cmdtype=runnamednamedcmd =IA2list_id=105314https://issues.apache.org/ooo/buglist.cgi?cmdtype=runnamednamedcmd=IA2list_id=105314 1. We need volunteers to confirm unconfirmed defects and verify fixed defects 2. Call for more developer to involve in fixing defects *Issues quality highlight:* 1. BVT Passed on branch version 2. Possible Impacted Area according by Steve: UI, document editing area, graphic objects. And no visible changes will be made to dialogs. Another possible area will be affected is stability. *Volunteer status: * We have two new volunteers(Buddy Brannan/Martin Courcelles) interested in testing, 3 person had already worked for branch version if you have interest in joining the bug work, please let me know your Bugzilla ID you have . On the bugzilla, my ID is my mail mengualjeanphi at free dot fr If you want to contribute to test in testlink , please send me your TestLinkID I will assign test cases to you. I study your mail in details and try to come in the process to test. Regards Thanks you all for effort - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: Request For improvement
hi,Rizwan Can you provide AOO build version , platform information and sample files ,which contribute to us to confirm issue, thanks your support On Tue, Nov 12, 2013 at 7:01 PM, Rizwan Mohammed king...@live.co.uk wrote: Hi my name is Mohammed Rizwan This email is concerning the Open Office I am currently studying in the University of Bolton and I have chosen this software to have a look at Their is one problem which I realized when I was using this software which is that when a large file is opened the software will crash.
Re: [Accessibility] IA2 should be enabled automatically
+1 I agree that IA2 feature can be enabled automatically as default option ,which enable screen readers and other assistive technologies to work at beginning and convenient to most people who be eager to need this feature On Thu, Nov 14, 2013 at 11:34 AM, Steve Yin steve.yin@gmail.com wrote: Hi all, Based on this issue https://issues.apache.org/ooo/show_bug.cgi?id=123643 , IA2 feature and the status of the option about accessibility check box should be enabled automatically when AOO detects screen reader running. Do you agree with that? Thanks. -- Best Regards, Steve Yin
Re: Call for Automation BVT volunteer for AOO4.1
Hi,all Because Build update for synchronize ia2 branch with the latest trunk , So make BVT for 410m1(Build:9750) (en-US) Rev 1540658https://fisheye6.atlassian.com/changelog/~br=trunk/ooo/?showid=1540658 BVT result : All 22 testcases , Pass 22, Fail 0, Error 0 , Ignored 0 The detailed information ,please refer capture.png and http://wiki. openoffice.org/wiki/QA/BVT_Report, On Fri, Nov 8, 2013 at 2:41 PM, Liu Ping doneyours...@gmail.com wrote: Hi, Sandhya Ia2 branch builds is ready, focus on BTV Automatic testing on Windows Plaform The ia2 branch builds are on the daily Buildbot, current is rev 1539225 http://ci.apache.org/projects/openoffice/install/w7ia2/Apache_OpenOffice _4.1.0_Win_x86_install_en-US.exe_1539225.exe You can post the BVT result on, thanks http://wiki.openoffice.org/wiki/QA/BVT_Report, And we need more volunteers on multi-platform(Linux 64bit and Mac 10.8 and Mac 10.9 ) to support continuing testing ,please reply this letter and post your name/email and your platform Thanks On Wed, Nov 6, 2013 at 6:37 AM, Kay Schenk kay.sch...@gmail.com wrote: On Tue, Nov 5, 2013 at 1:41 PM, Andrew Rist andrew.r...@oracle.com wrote: On 11/5/2013 10:32 AM, Kay Schenk wrote: On Mon, Nov 4, 2013 at 10:15 AM, Alexandro Colorado j...@oooes.org wrote: I reported this a while back: http://markmail.org/message/x2plcngb6xczxbch yes...we have NIGHTLY 32 bit RPMS buildt from trunk but not snapshot builds -- those built from the snapshot trunk -- at the moment. I believe the rpm was failing on the snapshot, and I did not have the time to sort that. I'll try with the rpms, and if it succeeds we'll leave that running. A. OK, thanks -- I didn't know if the linux-32 snapshot was just setup to output debs or ??? so thanks for this note. On Mon, Nov 4, 2013 at 12:00 PM, Kay Schenk kay.sch...@gmail.com wrote: On Sun, Nov 3, 2013 at 9:18 PM, Liu Ping doneyours...@gmail.com wrote: Hi ,Kay Maybe you can get RPM packs for 32-bit Linux snapshot. from http://ci.apache.org/projects/openoffice/ Hi. These snapshot packs are all deb format, not rpm. I don't know what the decisions were concerning these setups. OK. I will see what I can find out about this. There ARE nightly Linux-32 rpm packs but not from the SNAPSHOT trunk. On Sun, Nov 3, 2013 at 1:16 AM, Kay Schenk kay.sch...@gmail.com wrote: On Fri, Oct 25, 2013 at 1:09 AM, Liu Ping doneyours...@gmail.com wrote: Hi, all. BVT(Build Verification Testing) is a set of tests that run on new build to verify that whether the build is testable or not, which play an important role in software quality Encourage more efforts in community to engage in automation BVT for AOO 4.1 (refer item 5 in AOO 4.1 Test Arrangement) (1)First, Welcome volunteers familiar with BVT according by the guidence http://wiki.openoffice.org/wiki/QA/BVT Hi -- Currently, there are no RPM packs for 32-bit Linux snapshot. Does anyone know why? Below are prerequisites: 1) 1)Environment tool: SVN Client, JDK, Ant 2) 2)Soft Skills: · a.Basic skills about Windows Command line, Linux/Mac Terminal · b.Basic knowledge of Java If have some problems, please put forward issues that block you. I will help to resolve it. (2)Second, Notice new build and collect volunteers’ BTV result. Please post your name/email and your platform , When new build is ready I will notice by email. Volunteer post your result on http://wiki.openoffice.org/wiki/QA/BVT_Report, thx. -- - MzK “Unless someone like you cares a whole awful lot, Nothing is going to get better. It's not.” -- Dr. Seuss, The Lorax -- - MzK “Unless someone like you cares a whole awful lot, Nothing is going to get better. It's not.” -- Dr. Seuss, The Lorax -- Alexandro Colorado Apache OpenOffice Contributor http://www.openoffice.org 882C 4389 3C27 E8DF 41B9 5C4C 1DB7 9D1C 7F4C 2614 - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org -- - MzK “Unless someone like you cares a whole awful lot
Re: [Accessibility] IA2 Integration proposal
Hi,all From Sandhya Sivakumar's feedback in Call for Automation BVT volunteer for AOO4.1 mail subject, Sandhya have run all the testcases and all of them have passed on Windows7 Platform That is good news and thanks Sandhya's efforts On Mon, Nov 11, 2013 at 9:43 PM, V Stuart Foote vstuart.fo...@utsa.eduwrote: Jean-Phillipe, Removal of earlier revisions of the ia2 branch may have corrupted the MSAA libraries. Have you unregistered UAccCOM.dll with a regsvr32.exe /U command, and have you tried re-registering the oleacc.dll and oleaut32.dll? Additional notes in issue aoo#123640 https://issues.apache.org/ooo/show_bug.cgi?id=123640 . Stuart -- View this message in context: http://openoffice.2283327.n4.nabble.com/Accessibility-IA2-Integration-proposal-tp4655454p460.html Sent from the Development mailing list archive at Nabble.com. - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: [Accessibility] IA2 Integration proposal
Hi,all From Sandhya Sivakumar's feedback in Call for Automation BVT volunteer for AOO4.1 mail subject, Sandhya have run all the testcases and all of them have passed on Windows7 Platform That is good news and thanks Sandhya's efforts On Mon, Nov 11, 2013 at 9:43 PM, V Stuart Foote vstuart.fo...@utsa.eduwrote: Jean-Phillipe, Removal of earlier revisions of the ia2 branch may have corrupted the MSAA libraries. Have you unregistered UAccCOM.dll with a regsvr32.exe /U command, and have you tried re-registering the oleacc.dll and oleaut32.dll? Additional notes in issue aoo#123640 https://issues.apache.org/ooo/show_bug.cgi?id=123640 . Stuart -- View this message in context: http://openoffice.2283327.n4.nabble.com/Accessibility-IA2-Integration-proposal-tp4655454p460.html Sent from the Development mailing list archive at Nabble.com. - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: Greetings
Hi will Welcome If you are interested in QA work , you may find some useful information: http://openoffice.apache.org/orientation/intro-qa.html subscribing to the mailing list , you'll receive the various requests for help and you can choose how to contribute. Don't hesitate to send along any questions! On Sat, Nov 9, 2013 at 7:02 PM, Raphael Bircher r.birc...@gmx.ch wrote: Hi will Am 09.11.13 11:32, schrieb Will Blades: Hello, Apologies for the rather late reply. You have not to apologies. Everyone here does the work when he has time. It's up to you to decide when and on what you work. Thank you for your acceptance and kind words. I have been subscribed myself to both the dev and qa lists, and I probably will begin This is a good start by taking on reported bugs. I read the orientation document is rather extensive, but if you notice that I did not follow procedure or the like, kindly let me know . I offer you to review your first issues, and mentoring you a little bit, if you want. Simply write me a e-mail with the bugs you have commented. Byside I'm also aviable on IRC: Channel freenode, Room: # dev.openoffice.org my nick is rbircher. Good luck for your start Greetings Raphael - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: [Call For QA Volunteers][Accessibility] AOO IAccessible2 testing work
Hi ,all Not limiti to dev-mali loop, call for need more volunteers for AOO IAccessible2 Testing in QA-mail loop Now we are testing on ia2 branch builds , focus on BTV Automatic testing on Windows Plaform and BTV scenario IAccessible2 testing The ia2 branch builds are on the daily Buildbot, current is rev 1539225 http://ci.apache.org/projects/openoffice/install/ w7ia2/Apache_OpenOffice_4.1.0_Win_x86_install_en-US.exe_1539225.exe Issues are being recorded in Bugzilla(https://issues.apache.org/ooo/) and are being tagged with an [Accessibility][IA2] or [ia2] in the subject You can get existing issue by publish query: https://issues.apache.org/ooo/buglist.cgi?cmdtype=doremremaction=runnamedcmd=IA2sharer_id=249289list_id=102767 Later when the branch is merged into trunk for the 4.1.0 release , we need more volunteers to support AOO IAccessible2 Testing So Welcome join in AOO IAccessible2 Testing and reply this mail Thanks On Mon, Oct 14, 2013 at 4:24 PM, Steve Yin steve.yin@gmail.com wrote: Hi all, The AOO IAccessible2 migration dev work will be done in a few days. We need QA volunteers to join the testing work and ensure the migration quality. The source can be get from here: https://svn.apache.org/repos/asf/openoffice/branches/ia2 The Windows build can be get from here: http://ci.apache.org/projects/openoffice/#w7ia2 If you are interested in the AOO IAccessible2 testing work, please reply this mail. Thanks. -- Best Regards, Steve Yin
Re: Call for Automation BVT volunteer for AOO4.1
Hi, Sandhya Ia2 branch builds is ready, focus on BTV Automatic testing on Windows Plaform The ia2 branch builds are on the daily Buildbot, current is rev 1539225 http://ci.apache.org/projects/openoffice/install/w7ia2/Apache_OpenOffice _4.1.0_Win_x86_install_en-US.exe_1539225.exe You can post the BVT result on, thanks http://wiki.openoffice.org/wiki/QA/BVT_Report, And we need more volunteers on multi-platform(Linux 64bit and Mac 10.8 and Mac 10.9 ) to support continuing testing ,please reply this letter and post your name/email and your platform Thanks On Wed, Nov 6, 2013 at 6:37 AM, Kay Schenk kay.sch...@gmail.com wrote: On Tue, Nov 5, 2013 at 1:41 PM, Andrew Rist andrew.r...@oracle.com wrote: On 11/5/2013 10:32 AM, Kay Schenk wrote: On Mon, Nov 4, 2013 at 10:15 AM, Alexandro Colorado j...@oooes.org wrote: I reported this a while back: http://markmail.org/message/x2plcngb6xczxbch yes...we have NIGHTLY 32 bit RPMS buildt from trunk but not snapshot builds -- those built from the snapshot trunk -- at the moment. I believe the rpm was failing on the snapshot, and I did not have the time to sort that. I'll try with the rpms, and if it succeeds we'll leave that running. A. OK, thanks -- I didn't know if the linux-32 snapshot was just setup to output debs or ??? so thanks for this note. On Mon, Nov 4, 2013 at 12:00 PM, Kay Schenk kay.sch...@gmail.com wrote: On Sun, Nov 3, 2013 at 9:18 PM, Liu Ping doneyours...@gmail.com wrote: Hi ,Kay Maybe you can get RPM packs for 32-bit Linux snapshot. from http://ci.apache.org/projects/openoffice/ Hi. These snapshot packs are all deb format, not rpm. I don't know what the decisions were concerning these setups. OK. I will see what I can find out about this. There ARE nightly Linux-32 rpm packs but not from the SNAPSHOT trunk. On Sun, Nov 3, 2013 at 1:16 AM, Kay Schenk kay.sch...@gmail.com wrote: On Fri, Oct 25, 2013 at 1:09 AM, Liu Ping doneyours...@gmail.com wrote: Hi, all. BVT(Build Verification Testing) is a set of tests that run on new build to verify that whether the build is testable or not, which play an important role in software quality Encourage more efforts in community to engage in automation BVT for AOO 4.1 (refer item 5 in AOO 4.1 Test Arrangement) (1)First, Welcome volunteers familiar with BVT according by the guidence http://wiki.openoffice.org/wiki/QA/BVT Hi -- Currently, there are no RPM packs for 32-bit Linux snapshot. Does anyone know why? Below are prerequisites: 1) 1)Environment tool: SVN Client, JDK, Ant 2) 2)Soft Skills: · a.Basic skills about Windows Command line, Linux/Mac Terminal · b.Basic knowledge of Java If have some problems, please put forward issues that block you. I will help to resolve it. (2)Second, Notice new build and collect volunteers’ BTV result. Please post your name/email and your platform , When new build is ready I will notice by email. Volunteer post your result on http://wiki.openoffice.org/wiki/QA/BVT_Report, thx. -- - MzK “Unless someone like you cares a whole awful lot, Nothing is going to get better. It's not.” -- Dr. Seuss, The Lorax -- - MzK “Unless someone like you cares a whole awful lot, Nothing is going to get better. It's not.” -- Dr. Seuss, The Lorax -- Alexandro Colorado Apache OpenOffice Contributor http://www.openoffice.org 882C 4389 3C27 E8DF 41B9 5C4C 1DB7 9D1C 7F4C 2614 - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org -- - MzK “Unless someone like you cares a whole awful lot, Nothing is going to get better. It's not.” -- Dr. Seuss, The Lorax
Re: regression bug in Writer: Writer freezes - mail merge - page preview
Hi I found the status of this defect(https://issues.apache.org/ooo/ show_bug.cgi?id=123418) already resolved fixed :hdu committed SVN revision 1529824 http://svn.apache.org/viewvc?view=revisionrevision=1529824 into trunk:on 2013-10-07 12:07:11 UTC Maybe someone are interesting in verify this defect On Mon, Nov 4, 2013 at 3:43 PM, Guenter Marxen guenter.mar...@googlemail.com wrote: Thanks, Ariel, this seams to be the appropriate issue. @ Liu Ping: Therefor no action on my side is necessary. -- Grüße Günter Marxen Am 04.11.2013 05:11, schrieb Ariel Constenla-Haile: On Mon, Nov 04, 2013 at 02:29:56AM +0100, Guenter Marxen wrote: regression bug in AOO 4.0 (I did not find an issue). ... This looks like https://issues.apache.org/ooo/show_bug.cgi?id=123418 Regards - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: regression bug in Writer: Writer freezes - mail merge - page preview
hi,Guenter I create a new mail-merge document and reproduce this issue according by your steps on Windows7 OS on build English US (en-US) AOO4.0.1 1524958 and can't reproduce AOO3.4.1 So I support your view that is regression issue I roughlysearch whether there is an existing similiar defect ,no result ; I suggest you open defect in BZ (https://issues.apache.org/ooo/ ) to track this issue and post sample files in BZ Thanks On Mon, Nov 4, 2013 at 9:29 AM, Guenter Marxen guenter.mar...@googlemail.com wrote: Hi, regression bug in AOO 4.0 (I did not find an issue). Win 7 Pro x64 German, AOO 4.0.1 German, 4.0.0 de and en(US); AOO 3.4.1 de is OK AOO 4.0.1 freezes (after a little time) when clicking on button page preview if address table is open (F4 view data sources). 1. open a mail-merge document, open the adress-table with F4, fill in an address. 2. click on button page preview. After some seconds a (Windows-) message window appears OpenOffice 4.0.1 does not function anymore (German: OpenOffice 4.0.1 funktioniert nicht mehr) and a solution is searched. After some time the whole OO-window is gray and it can only be closed in the message window with a button Close program. It is the same with 4.0.0 de and en(US). But OO 3.4.1 de is OK (with the same files). -- Grüße Günter Marxen - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: Call for Automation BVT volunteer for AOO4.1
Hi ,Kay Maybe you can get RPM packs for 32-bit Linux snapshot. from http://ci.apache.org/projects/openoffice/ On Sun, Nov 3, 2013 at 1:16 AM, Kay Schenk kay.sch...@gmail.com wrote: On Fri, Oct 25, 2013 at 1:09 AM, Liu Ping doneyours...@gmail.com wrote: Hi, all. BVT(Build Verification Testing) is a set of tests that run on new build to verify that whether the build is testable or not, which play an important role in software quality Encourage more efforts in community to engage in automation BVT for AOO 4.1 (refer item 5 in AOO 4.1 Test Arrangement) (1)First, Welcome volunteers familiar with BVT according by the guidence http://wiki.openoffice.org/wiki/QA/BVT Hi -- Currently, there are no RPM packs for 32-bit Linux snapshot. Does anyone know why? Below are prerequisites: 1) 1)Environment tool: SVN Client, JDK, Ant 2) 2)Soft Skills: · a.Basic skills about Windows Command line, Linux/Mac Terminal · b.Basic knowledge of Java If have some problems, please put forward issues that block you. I will help to resolve it. (2)Second, Notice new build and collect volunteers’ BTV result. Please post your name/email and your platform , When new build is ready I will notice by email. Volunteer post your result on http://wiki.openoffice.org/wiki/QA/BVT_Report, thx. -- - MzK “Unless someone like you cares a whole awful lot, Nothing is going to get better. It's not.” -- Dr. Seuss, The Lorax
Re: Problems Installing
I follow scenario 1 , update install from AOO3.4.1 Rev 1372282 to AOO4.0 Rev 1503704, Pass .No Error message On Fri, Oct 25, 2013 at 10:52 AM, Liu Ping doneyours...@gmail.com wrote: hi,paul I merged Apache Openoffice 4 and 3.4.1 on my desk top,. what means merge? update install? You may attempt to restart machine or kill Apache Openoffice process I will attempt to two scenario on WinXP OS : Scenario1.Update install Scenario2.Uninstall Apache Openoffice 3.4.1 and install Apache Openoffice 4 later will give the result On Wed, Oct 23, 2013 at 2:38 PM, paul lavender lavender...@hotmail.comwrote: Hi, I have used Apache Openoffice for a while. A few weeks ago I merged Apache Openoffice 4 and 3.4.1 on my desk top,. Since then it will not open . I cannot uninstall it to start again, error1316 appears and stops the process I cannot install a fresh Openoffice because error1316 appears and stops the process My PC is Windows XP Please advise Many thanks Regards Paul Lavender UK
Call for Automation BVT volunteer for AOO4.1
Hi, all. BVT(Build Verification Testing) is a set of tests that run on new build to verify that whether the build is testable or not, which play an important role in software quality Encourage more efforts in community to engage in automation BVT for AOO 4.1 (refer item 5 in AOO 4.1 Test Arrangement) (1)First, Welcome volunteers familiar with BVT according by the guidence http://wiki.openoffice.org/wiki/QA/BVT Below are prerequisites: 1) 1)Environment tool: SVN Client, JDK, Ant 2) 2)Soft Skills: · a.Basic skills about Windows Command line, Linux/Mac Terminal · b.Basic knowledge of Java If have some problems, please put forward issues that block you. I will help to resolve it. (2)Second, Notice new build and collect volunteers’ BTV result. Please post your name/email and your platform , When new build is ready I will notice by email. Volunteer post your result on http://wiki.openoffice.org/wiki/QA/BVT_Report, thx.
Re: [VCLAuto] Documentation of FVT
hi,Raphael: Welcome your effort on VCL auto scripts We have no FVT page similiar with BVT on http://wiki.openoffice.org/**wik i/QA/BVT http://wiki.openoffice.org/wiki/QA/BVT But you can get material information from http://wiki.openoffice.org/wiki/QA/FVT/FVTRefactor and http://wiki.openoffice.org/wiki/QA/dev_gui_testing And if you are interested in write FVTpage Welcome any question at any time On Thu, Oct 17, 2013 at 4:49 AM, Rob Weir robw...@apache.org wrote: On Wed, Oct 16, 2013 at 5:27 AM, Raphael Bircher r.birc...@gmx.ch wrote: Am 14.10.13 09:21, schrieb Raphael Bircher: Hi at all, mainly to China and Herbert ;-) All at vacation? Maybe try the QA mailing list? -Rob I working on the VCL Auto scripts. There is a detailed documentation for the BVT on http://wiki.openoffice.org/wiki/QA/BVT . Exist samething similar to the FVT? I haven't found it. Thanks for your information and best whishs for the week from Switzerland. Greetings Raphael - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: Call for volunteers for AOO 4.0.1 performance test
Drew ,Thanks your support According Simon and yuzhen's suggestion , I will post the PVT result with latest AOO4.0.1 build on Windows7 about next Thursday Hope more volunteers involve in PVT testing Thanks Drew again On Fri, Sep 6, 2013 at 11:37 PM, Drew Jensen drewjensen.in...@gmail.comwrote: Thanks for that. I've got kind of my own stress test regiment - I grabbed 4.0.1 snapshot day before yesterday (sorry likely can't get the one Juergen just started uploading) and I will throw what I have at it this weekend. Will post to this thread (update the wiki) with information early next week (Monday if I can). Thanks again //drew On Fri, Sep 6, 2013 at 4:26 AM, Liu Ping doneyours...@gmail.com wrote: Hi, all: AOO 4.0.1 will release. Performance plays an important role in software quality. Is there any volunteer who want to run performance test? I've run AOO performance GUI test on my own machines. I've tried on one platforms: Windows 7. The test configure is as follows: Test Environment: CPU:2.6 GHz; Mem: 8GB; OS: Windows7 Test Build: AOO.4.0.1_r1518667; Baseline AOO4.0_r1503704 Test Evaluation Method:Automatically run each test case 8 times and compute the average value of 5 times (excluding the first round result, the minimum and maximum result). The test scenario include: Slideshow, new AOO file, load file and save. Volunteers could run performance test on other platforms. Please Post PVT Report in Wiki http://wiki.openoffice.org/wiki/QA/PVT_Report All the automation scripts could be downloaded in AOO project. And it is not difficult to set the automation environment. You could follow the guide: *[Automation Development Guide]* http://wiki.openoffice.org/wiki/QA/test_automation_guide [how to run PVT] http://wiki.openoffice.org/wiki/QA/PVT Reminder: 1.Be sure that we should keep the test configuration unchanged between build to build. 2.PVT of AOO consists of two parts: GUI and UNO. PVT GUI Testing (run pvt.gui.benchmark) and PVT UNO Testing (pvt.uno.Conversion) For any questions, be free to contact with me :
Call for volunteers for AOO 4.0.1 performance test
Hi, all: AOO 4.0.1 will release. Performance plays an important role in software quality. Is there any volunteer who want to run performance test? I've run AOO performance GUI test on my own machines. I've tried on one platforms: Windows 7. The test configure is as follows: Test Environment: CPU:2.6 GHz; Mem: 8GB; OS: Windows7 Test Build: AOO.4.0.1_r1518667; Baseline AOO4.0_r1503704 Test Evaluation Method:Automatically run each test case 8 times and compute the average value of 5 times (excluding the first round result, the minimum and maximum result). The test scenario include: Slideshow, new AOO file, load file and save. Volunteers could run performance test on other platforms. Please Post PVT Report in Wiki http://wiki.openoffice.org/wiki/QA/PVT_Report All the automation scripts could be downloaded in AOO project. And it is not difficult to set the automation environment. You could follow the guide: *[Automation Development Guide]* http://wiki.openoffice.org/wiki/QA/test_automation_guide [how to run PVT] http://wiki.openoffice.org/wiki/QA/PVT Reminder: 1.Be sure that we should keep the test configuration unchanged between build to build. 2.PVT of AOO consists of two parts: GUI and UNO. PVT GUI Testing (run pvt.gui.benchmark) and PVT UNO Testing (pvt.uno.Conversion) For any questions, be free to contact with me :
Re: Call for volunteers to verify 4.0.1 resolved defects
I am willing to verify these defects , and may assign to me , Bug ID : donemys...@gmail.com , Platform: Windows7/Mac 10.8/Linux 64 or 32bit
Re: Next Plan for AOO 4.0 Testing
For Base testing , we may Inherit from AOO3.4/3.4.1 use-based testing , but it is good idea from Rob that have entire coverage testing schema for Base as a long-term task I am interested in writing database case and willing to perfect database general testing cases in wiki And I have a suggestion Is it possible that the case will be imported to testlink when some testcase of Base is finished in wiki On Wed, May 15, 2013 at 12:23 AM, Kay Schenk kay.sch...@gmail.com wrote: On Tue, May 14, 2013 at 5:29 AM, Rob Weir robw...@apache.org wrote: On Sun, May 12, 2013 at 6:52 PM, Kay Schenk kay.sch...@gmail.com wrote: On Mon, May 6, 2013 at 4:40 AM, Yuzhen Fan fanyuz...@gmail.com wrote: (Added dev in this mail thread ..) Simon and all, Here is the update of the preparation for full regression: - All test cases are populated to test plan AOO 4.0 Full Regression Test in TestLink - Test guidance for Full Regression Test and Defect Verification are ready and have published in wiki https://cwiki.apache.org/confluence/display/OOOUSERS/AOO+Full+Regression+Test+Guidance https://cwiki.apache.org/confluence/display/OOOUSERS/AOO+Defect+Verification+Guidance - Defect verification list are generated per different products with multiple queries Thanks Liu Ping to make defect queries. Thanks Simon for guidance and reviewing all preparation work above. Regards, Yu Zhen I thought I might like to help with this. I'm interested in testing Base portions, but, I don't see any tests that apply to Base. Are there any? Test cases in Testlink are derived from the test cases used for Symphony. But Symphony did not include Base. So if we want structured testing of Base we'll need someone (or several people) to write some test cases. Or we could do informal, use-based testing like we did with 3.4./3.4.1. But best to get some tests defined so we can have consistent coverage. That will require that someone with expertise as a Base user step up to lead this. Regards, -Rob OK...this is what I figured after a while. The big problem with testing for Base is the availability of a test DB(s) to test connectivity in some way -- our indigenous MySQL connector, jdbc etc. Any ideas about that? On Mon, May 6, 2013 at 7:25 PM, Yuzhen Fan fanyuz...@gmail.com wrote: Simon and all, Here is the update of the preparation for full regression: - All test cases are populated to test plan AOO 4.0 Full Regression Test in TestLink - Test guidance for the Full Regression Test and Defect Verification are ready and have published in wiki https://cwiki.apache.org/confluence/display/OOOUSERS/AOO+Full+Regression+Test+Guidance https://cwiki.apache.org/confluence/display/OOOUSERS/AOO+Defect+Verification+Guidance On Fri, May 3, 2013 at 4:05 PM, Shenfeng Liu liush...@gmail.com wrote: Hi, all, I just want to update on our next plan for AOO 4.0 Testing. Since sidebar FVT already finished, we are currently preparing for a full regression which will cover the following areas: (1) Basic Function Verification (2) MS Interoperability Test (3) 2nd phase of sidebar testing (4) Defect verification So following works are on going: - Yi Xuan and Yu Zhen are inputting test cases in Testlink. - Yu Zhen and I are working on are test guidance for the Full Regression Test, and plan to publish it on our planning wiki for reference. - Then we wait for the next snapshot build from Juergen which contains the most recent fixes. I saw many people joined and volunteered for QA work. I will keep a list and contact you all when the Regression Testing is kicked off. Thanks very much for your supporting to AOO QA work! - Shenfeng (Simon) -- MzK God, grant me the serenity to accept the things I cannot change, The courage to change the things I can, And wisdom to know the difference. -- The Serenity Prayer, adapted from Reinhold Niebuhr - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org -- MzK God, grant me the serenity to accept the things I cannot change, The courage to change the things I can, And wisdom to know the difference. -- The Serenity Prayer, adapted from Reinhold Niebuhr
Re: Defects need be fixed with high priority in AOO 4.0
hi,Rob I inform Priority and Severity fields from BZ help 1. *Priority:* The bug assignee uses this field to prioritize his or her bugs. It's a good idea not to change this on other people's bugs. 2. *Severity:* This indicates how severe the problem is - from blocker (application unusable) to trivial (minor cosmetic issue). You can also use this field to indicate whether a bug is an enhancement request. if you are interested in other fields ,you can get from https://issues.apache.org/ooo/docs/en/html/bug_page.html For the level for Priority and Severity , refer http://www.mediawiki.org/wiki/Bugzilla/Fields SeverityMeaningBlockerBlocks further development and/or testing work. CriticalCrashes, loss of data (internally, not your edit preview!) in a widely used and important component.MajorMajor loss of function in an important area.NormalDefault/average.MinorMinor loss of function, or other problem that does not affect many people or where an easy workaround is present.TrivialCosmetic problem like misspelled words or misaligned text which does not really cause problems.EnhancementRequest for a new feature or change in functionality for an existing feature. PriorityMeaningimmediateMust be fixed immediately (means: Drop any other work). Reports should have an assignee set in the Assigned to field, and both assignees and further affected parties (e.g. Engineering Managementhttp://www.mediawiki.org/wiki/Wikimedia_Engineering) should also be informed by private email, to be on the safe side.highestShould be fixed as next task by a team and certainly before the next deployment. Teams should only have very few issues (preferably one) with highest priority at the same time. Reports should have an assignee set in the Assigned to field. In case of Platform Engineeringhttp://www.mediawiki.org/wiki/Wikimedia_Platform_Engineeringtickets, notify RobLa http://meta.wikimedia.org/wiki/User:RobLa-WMF separately.highNot the next task, but should be fixed soon. Depending on teams manpower this can take between one and six months.normalMedium priority; would be good to get fixed somewhere in the future. Contributed patches might speed fixing up.low This can be fixed, but we're not going to worry about it. Patches very welcome and required for progress. lowest This can be fixed, but we're not going to worry about it. Patches very welcome and required for progress. On Wed, May 8, 2013 at 9:08 PM, Rob Weir robw...@apache.org wrote: On Wed, May 8, 2013 at 8:54 AM, Yuzhen Fan fanyuz...@gmail.com wrote: Hi, We have pretty high backlog for unresolved defects, we need to clean them as much as possible before we exit full regression. Before we focus on the fixing work, let's set the filter and get the defect list with high priority. I would suggest we use this way: 1. Get candidate defects by query: severity = blocker, critical and status = unconfirmed, confirmed, reopened 2. Evaluate them and set/unset Flags as 4.0.0_release_blocker to get defect list with high priority 3. Assign these defects to development volunteers for fixing and QA to verify once get resolved You comment and suggestion are welcome! Maybe someone can help clarify something: The BZ form has two fields for rating bugs: P1/P2/P3/P4 field and a blocker/critical/major/normal/minor/trivial field. What is the difference? Also, the 4.0 release blocker has 3 values: ?/+/-. The way we did it before was to set the field to ? to propose it as a blocker, and then discuss it on the dev mailing list. If there was consensus it was a blocker then the value is changed to +. -Rob Regards, Yu Zhen - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
[QA][Weekly Report] Weekly Defect Status by 20130427
Hi, all: Here is the weekly defect status (20130420~20130427): http://wiki.openoffice.org/wiki/QA/Report/DefectStatus/20130429 Focus on four category of defect's statistics and by product and severity/date Weekly Opened / Nubmer 57 Weekly Fixed/ Nubmer 28 Weekly Confirmed/ Nubmer 43 Weekly Verified Defect /Nubmer 5 Thanks for all voluteers in testing in past weeks. Hope you could continue support test this week :) Best Regards liuping
Re: Apache OpenOffice 4.0 Logo Survey now Open!
Good idea !! already select a *simplicity* and *elegance*.logo from many beautiful design , Earge to see new logo on May 15th on the Apache OpenOffice blog http://blogs.apache.org/OOo/. On Fri, Apr 26, 2013 at 5:21 PM, Xin Li lxnice...@gmail.com wrote: Great and interesting ! Have submitted my vote! Looking forward to the result! 2013/4/25 Manuel del Valle m...@outlook.com Date: Wed, 24 Apr 2013 11:50:15 -0400 Subject: Apache OpenOffice 4.0 Logo Survey now Open! From: robw...@apache.org To: dev@openoffice.apache.org; market...@openoffice.apache.org; us...@openoffice.apache.org The Apache OpenOffice project is planning a brand refresh for our next major release, Apache OpenOffice 4.0. As part of this effort we are looking to update our logo. We've received 40 proposals from community members and we would like your feedback on these designs. Great! many nice logo designs, and quite different... You can find the survey here: http://survey.openoffice.org/index.php/815178/ I'm having trouble getting to the actual logo survey with Chrome. After answering the first demographical questions, I can't submit them: the Next button won't work. I'm using Chrome Versión 26.0.1410.64 m, on Windows 7 SP1 (x64) I tried a couple of times, same result. I finally submitted my votes using Firefox. I also tried Opera, next button works fine. Thanks in advance for your participation and feedback. Thank you for setting up the survey! Regards, -Rob - To unsubscribe, e-mail: marketing-unsubscr...@openoffice.apache.org For additional commands, e-mail: marketing-h...@openoffice.apache.org -- Best regards, Xin Li 李欣 UX designer
Re: Hi
Welcome zhen, your professional testing background will benefit for AOO On Fri, Apr 26, 2013 at 9:48 PM, Yue Helen helenyu...@gmail.com wrote: Great! Your experience will definitely help here. Helen 2013/4/26 Yuzhen Fan fanyuz...@gmail.com Hi, This is Yu Zhen, Fan from Beijing, China. I finally joined this great community! I have almost ten years worth of experience in testing on desktop and web applications, and have quite a few of knowledge on test methodology, test strategy, test plan, test cases, defect, report and analysis. I am pretty hopeful that I will be able to meet the needs of the project on testing activities, and any amount of dedication that it may require. Any thing I can contribute, kindly let me know. Thanks. Regards, Yu Zhen, Fan
