Re: [DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2
Hi Dennis, Dennis E. Hamilton schrieb: -Original Message- From: Jürgen Schmidt [mailto:jogischm...@gmail.com] Sent: Tuesday, October 27, 2015 10:04 To: dev@openoffice.apache.org Subject: Re: [DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2 On 27/10/15 17:45, Regina Henschel wrote: Hi Jürgen, Jürgen Schmidt schrieb: checked the build in the morning and en-US built was successful. Besides the fact that we have some issues on newer Linux distros (we ever had) the src package is fine. @Regina, I still have no ideas what the problem is in your env but maybe you can give one of the tar balls a try instead of the zip. I have use apache-openoffice-4.1.2-r1709696-src.tar.gz now and unzipped it in Cygwin. That source builds fine then. I have added a note to https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO/Step_b y_step#Windows_7 not to use Windows tools for unpacking. good that we figured out why it didn't worked with the zip but it is strange. We can think about dropping the zip completely. Users have to use cygwin anyway and probably have the tools in place already. I would drop the zip src release in the future. [orcmid] Regina, can you explain what Windows tool you mean? Do you mean not using the default way that Windows will open/extract a .zip file? Yes. I remember that for Windows own unpack tool problems have been reported at OOo-times. Do you mean that a Zip utility like WinZip or 7Zip should not be used? Yes. I had used 7Zip and had got these strange access problems. I assume the change you mean is where you use the Cygwin bash session and use tar to unpack the tar.bz2 source. Is that correct? Yes. I have now unpacked it inside Cygwin, using "tar xvzf apache-openoffice-4.1.2-r1709696-src.tar.gz" (Or has the change not been pushed yet?) I have put my comment into section "Source release" right after the command example on the Wiki page https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO/Step_by_step#Windows_7. I don't know, whether unpacking the zip-source inside Cygwin would work. As both Jürgen and me could build it with the "tar.gz" source, I agree with Jürgen, that next time we should not provide a zip-source at all. Kind regards Regina - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
RE: [DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2
> -Original Message- > From: Jürgen Schmidt [mailto:jogischm...@gmail.com] > Sent: Tuesday, October 27, 2015 10:04 > To: dev@openoffice.apache.org > Subject: Re: [DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2 > > On 27/10/15 17:45, Regina Henschel wrote: > > Hi Jürgen, > > > > Jürgen Schmidt schrieb: > >> > >> checked the build in the morning and en-US built was successful. > Besides > >> the fact that we have some issues on newer Linux distros (we ever > had) > >> the src package is fine. > >> > >> @Regina, I still have no ideas what the problem is in your env but > maybe > >> you can give one of the tar balls a try instead of the zip. > > > > I have use apache-openoffice-4.1.2-r1709696-src.tar.gz now and > unzipped > > it in Cygwin. That source builds fine then. I have added a note to > > > https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO/Step_b > y_step#Windows_7 > > not to use Windows tools for unpacking. > > good that we figured out why it didn't worked with the zip but it is > strange. We can think about dropping the zip completely. Users have to > use cygwin anyway and probably have the tools in place already. I would > drop the zip src release in the future. [orcmid] Regina, can you explain what Windows tool you mean? Do you mean not using the default way that Windows will open/extract a .zip file? Do you mean that a Zip utility like WinZip or 7Zip should not be used? I assume the change you mean is where you use the Cygwin bash session and use tar to unpack the tar.bz2 source. Is that correct? (Or has the change not been pushed yet?) - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: [DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2
On 27/10/15 17:45, Regina Henschel wrote: > Hi Jürgen, > > Jürgen Schmidt schrieb: >> >> checked the build in the morning and en-US built was successful. Besides >> the fact that we have some issues on newer Linux distros (we ever had) >> the src package is fine. >> >> @Regina, I still have no ideas what the problem is in your env but maybe >> you can give one of the tar balls a try instead of the zip. > > I have use apache-openoffice-4.1.2-r1709696-src.tar.gz now and unzipped > it in Cygwin. That source builds fine then. I have added a note to > https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO/Step_by_step#Windows_7 > not to use Windows tools for unpacking. good that we figured out why it didn't worked with the zip but it is strange. We can think about dropping the zip completely. Users have to use cygwin anyway and probably have the tools in place already. I would drop the zip src release in the future. Juergen > > Kind regards > Regina > > - > To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org > For additional commands, e-mail: dev-h...@openoffice.apache.org > - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: [DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2
Hi Jürgen, Jürgen Schmidt schrieb: checked the build in the morning and en-US built was successful. Besides the fact that we have some issues on newer Linux distros (we ever had) the src package is fine. @Regina, I still have no ideas what the problem is in your env but maybe you can give one of the tar balls a try instead of the zip. I have use apache-openoffice-4.1.2-r1709696-src.tar.gz now and unzipped it in Cygwin. That source builds fine then. I have added a note to https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO/Step_by_step#Windows_7 not to use Windows tools for unpacking. Kind regards Regina - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: [DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2
On 26/10/15 15:05, Jürgen Schmidt wrote: > On 26/10/15 12:17, Regina Henschel wrote: >> Hi Jürgen, >> >> Jürgen Schmidt schrieb: >>> On 26/10/15 09:31, Regina Henschel wrote: [x] 0 Abstain It is still not clear, whether the fact, that I cannot build the delivered source on Windows 7 is a problem in my build environment or a bug in the source. >>> >>> Regina I don't know why it doesn't build on your machine but I >>> successfully built the tagged AOO410 branch for the RC on Windows, Mac >>> and Linuxc 32/64 bit. It was always a clean fresh build to the latest >>> tagged sources. The src tar balls are gnerated on Mac as I did it always >>> in the past. The included config scripts for Mac are a mistake and were >>> probably in all src releases in the past as well (good catch Damjan) >>> >>> Well I built the src tarball only on Mac because of the lack of time to >>> do it on the other platforms as well. But again it iis the same source I >>> used to build the binaries. >> >> If it is not my build environment, then it is likely a problem on >> Windows, because building in Cygwin is a little bit special. Sadly no >> one found the time to try building a src tar ball on Windows. We are not >> releasing binaries but source, and as long as nobody does a successful >> build of a src tall ball on Windows, I cannot vote +1 in good conscience. >> > > Regina, I used the tar.gz tarball and started a Windows build, > everything looks good so fr and it is still building. stlport for > example is finished, I don#t remeber what exactly your problems were. > > Herbert mentioned that he remembered problems with the zip file and > cygwin and permissions. Well I don't know and as mentioned I used the > tar.gz because it was smaller. > > I will let you know when the build is finished. checked the build in the morning and en-US built was successful. Besides the fact that we have some issues on newer Linux distros (we ever had) the src package is fine. @Regina, I still have no ideas what the problem is in your env but maybe you can give one of the tar balls a try instead of the zip. Juergen - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: [DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2
On 26/10/15 12:17, Regina Henschel wrote: > Hi Jürgen, > > Jürgen Schmidt schrieb: >> On 26/10/15 09:31, Regina Henschel wrote: >>> [x] 0 Abstain >>> >>> It is still not clear, whether the fact, that I cannot build the >>> delivered source on Windows 7 is a problem in my build environment or a >>> bug in the source. >> >> Regina I don't know why it doesn't build on your machine but I >> successfully built the tagged AOO410 branch for the RC on Windows, Mac >> and Linuxc 32/64 bit. It was always a clean fresh build to the latest >> tagged sources. The src tar balls are gnerated on Mac as I did it always >> in the past. The included config scripts for Mac are a mistake and were >> probably in all src releases in the past as well (good catch Damjan) >> >> Well I built the src tarball only on Mac because of the lack of time to >> do it on the other platforms as well. But again it iis the same source I >> used to build the binaries. > > If it is not my build environment, then it is likely a problem on > Windows, because building in Cygwin is a little bit special. Sadly no > one found the time to try building a src tar ball on Windows. We are not > releasing binaries but source, and as long as nobody does a successful > build of a src tall ball on Windows, I cannot vote +1 in good conscience. > Regina, I used the tar.gz tarball and started a Windows build, everything looks good so fr and it is still building. stlport for example is finished, I don#t remeber what exactly your problems were. Herbert mentioned that he remembered problems with the zip file and cygwin and permissions. Well I don't know and as mentioned I used the tar.gz because it was smaller. I will let you know when the build is finished. Juergen - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: [DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2
Niltze, all! On Mon, Oct 26, 2015 at 4:17 AM, Regina Henschel wrote: > Hi Jürgen, > > Jürgen Schmidt schrieb: >> >> On 26/10/15 09:31, Regina Henschel wrote: >>> >>> [x] 0 Abstain >>> >>> It is still not clear, whether the fact, that I cannot build the >>> delivered source on Windows 7 is a problem in my build environment or a >>> bug in the source. >> >> >> Regina I don't know why it doesn't build on your machine but I >> successfully built the tagged AOO410 branch for the RC on Windows, Mac >> and Linuxc 32/64 bit. It was always a clean fresh build to the latest >> tagged sources. The src tar balls are gnerated on Mac as I did it always >> in the past. The included config scripts for Mac are a mistake and were >> probably in all src releases in the past as well (good catch Damjan) >> >> Well I built the src tarball only on Mac because of the lack of time to >> do it on the other platforms as well. But again it iis the same source I >> used to build the binaries. > > > If it is not my build environment, then it is likely a problem on Windows, > because building in Cygwin is a little bit special. Sadly no one found the > time to try building a src tar ball on Windows. We are not releasing > binaries but source, and as long as nobody does a successful build of a src > tall ball on Windows, I cannot vote +1 in good conscience. > > Kind regards > Regina > > > Earlier, under limited time, I was unsuccessful in building ApacheOO from source in this GNU/Linux Debian Unstable environment. I tried several Java versions, including Zulu from Azul Systems. On the other hand, simply because I was not able to build it in my environment, it does not imply that ApacheOO 4.1.2-RC3 is not ready to become OpenOffice 4.1.2. I installed it into Debian Unstable and it performs beautifully. https://pbs.twimg.com/media/CSPi_4XVEAEvCHg.png:large Thank you to whoever built the binary! [X] +1 Approve RC3 to become ApacheOO 4.1.2 -- Jose R R http://metztli.it - Try at no charge http://b2evolution.net for http://OpenShift.com PaaS - from our GitHub http://Nepohualtzintzin.com repository. Cloud the easy way! - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: [DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2
Hi Jürgen, Jürgen Schmidt schrieb: On 26/10/15 09:31, Regina Henschel wrote: [x] 0 Abstain It is still not clear, whether the fact, that I cannot build the delivered source on Windows 7 is a problem in my build environment or a bug in the source. Regina I don't know why it doesn't build on your machine but I successfully built the tagged AOO410 branch for the RC on Windows, Mac and Linuxc 32/64 bit. It was always a clean fresh build to the latest tagged sources. The src tar balls are gnerated on Mac as I did it always in the past. The included config scripts for Mac are a mistake and were probably in all src releases in the past as well (good catch Damjan) Well I built the src tarball only on Mac because of the lack of time to do it on the other platforms as well. But again it iis the same source I used to build the binaries. If it is not my build environment, then it is likely a problem on Windows, because building in Cygwin is a little bit special. Sadly no one found the time to try building a src tar ball on Windows. We are not releasing binaries but source, and as long as nobody does a successful build of a src tall ball on Windows, I cannot vote +1 in good conscience. Kind regards Regina - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
[DISCUSS] [VOTE] Release 4.1.2-RC3 as OpenOffice 4.1.2
On 26/10/15 09:31, Regina Henschel wrote: > [x] 0 Abstain > > It is still not clear, whether the fact, that I cannot build the > delivered source on Windows 7 is a problem in my build environment or a > bug in the source. Regina I don't know why it doesn't build on your machine but I successfully built the tagged AOO410 branch for the RC on Windows, Mac and Linuxc 32/64 bit. It was always a clean fresh build to the latest tagged sources. The src tar balls are gnerated on Mac as I did it always in the past. The included config scripts for Mac are a mistake and were probably in all src releases in the past as well (good catch Damjan) Well I built the src tarball only on Mac because of the lack of time to do it on the other platforms as well. But again it iis the same source I used to build the binaries. Juergen > > Kind regards > Regina > > Andrea Pescetti schrieb: >> We have been in the Release Candidate stage for three weeks and it is >> now time to start a VOTE for releasing OpenOffice 4.1.2. >> >> Source and binary packages for RC3 are available at >> https://dist.apache.org/repos/dist/dev/openoffice/ >> and the reference revision is r1709696. Many people helped in making >> this available, but let me think Juergen and Herbert again for their >> assistance and guidance. >> >> I'm initially keeping the VOTE just a bit longer than the minimum 72 >> hours: please vote by Monday 26 October, 14:00 UTC. Extensions are >> surely possible if there is a need for them, but I hope that the very >> long testing phase we've gone through helps in shortening the final >> approval phase. >> >> So please VOTE on releasing RC3 (as defined above) as OpenOffice 4.1.2: >> [ ] +1 Approve >> [ ] 0 Abstain >> [ ] -1 Disapprove, with explanation >> >> Regards, >>Andrea. >> >> - >> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >> For additional commands, e-mail: dev-h...@openoffice.apache.org >> >> > > > - > To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org > For additional commands, e-mail: dev-h...@openoffice.apache.org > - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org