Hello,
While trying to access website 'www.openoffice.org', the error message
displayed below was received. This has been the case all day today. Does
anyone know what's causing the error and when it will be fixed?
Thanks~
~Jim
ERROR
The requested URL could not be retrieved
Giuseppe Castagno wrote:
mm, it seems I have no scext module, I checked out the source in full,
but no scext module present and no error signalled. I'll do it again.
that is issue 85986. I think there was a warning message just when the
build begins...
jim
but it is
very slow, maybe someone can improve that one?
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
http://www.openoffice.org/issues/show_bug.cgi?id=77840
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
for envelope crash and found nothing relevant.
That way people can give feedback that might help to improve the
searching method.
I think that would be better than asking on the lists.
jim
Thorsten Ziehm wrote:
Hi Gao,
first of all please write an issue in IssueTracker for this bug.
Without
]:~$ javac -version
Eclipse Java Compiler v_686_R32x, 3.2.2 release, Copyright IBM Corp
2000, 2006. All rights reserved.
If you run into problems with mixing versions there are some hints here:
http://www.openoffice.org/issues/show_bug.cgi?id=66252
jim
* | grep _
-rwxr-xr-x 1 jim jim34174 Apr 24 07:56 libvclplug_dummy680ls.so
-rwxr-xr-x 1 jim jim 2357729 Apr 24 07:56 libvclplug_gen680ls.so
-r--r--r-- 1 jim jim 605608 Apr 18 06:18 libvclplug_gen680ls.so.1.1
-rwxr-xr-x 1 jim jim 1365982 Apr 24 07:56 libvclplug_gtk680ls.so
-r--r--r-- 1 jim
Jim Watson wrote:
Should there be a plug_kde too?
half answering my own question...
gtk is enabled by default
kde is disabled by default
So I see it is necessary to configure with
--enable-kde to get a complete build
But I wonder why...?
jim
environment of the distribution packagers, we should build on the oldest
possible linux installation.
Is that what Sun does?
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
from here:
http://www.go-oo.org/lxr/source/gsl/vcl/unx/source/plugadapt/salplug.cxx#473
If you rebuild vcl with debug=t and drop the new lib into the installed
OOo there will be some messages that might give a clue what goes wrong.
jim
/issues/show_bug.cgi?id=75578
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=411287
thanks
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
On 26/03/2007, at 4:44 PM, Mathias Bauer wrote:
Jim Watson wrote:
On 24/03/2007, at 4:50 AM, Mathias Bauer wrote:
a reference to it ;)
http://sw.openoffice.org/source/browse/sw/writerfilter/source/
dmapper/
DomainMapperTableHandler.hxx?rev=1.1view=markup
initial check in
snip
#include
/
DomainMapperTableHandler.hxx?rev=1.1view=markup
initial check in
snip
#include com/sun/star/text/XTextAppendAndConvert.hpp
namespace dmapper {
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
On 24/03/2007, at 8:33 AM, Jim Watson wrote:
On 24/03/2007, at 4:50 AM, Mathias Bauer wrote:
nandan k wrote:
Hi All,
Where can I find the corresponding .idl for the header
file XTextAppendAndConvert.hpp? 16:33
it's not under com/sun/star/text directory in solver
also
solver 680
while
and qualification in the issue tracker, it is
helpful if you make an issue and attach the patch.
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
. remove
xmerge.jar from @regcompjars in solenv/bin/modules/installer/
globals.pm
That does not help here.
But also in globals.pm, playing with javamaxservices=15, I find that
any number 11 works OK.
jim
-
To unsubscribe, e
/debian-openoffice/
But i wonder, is there some special reason why you need to build your
debs from the upstream sources?
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
=$OFFICE_HOME/program
DYLD_LIBRARY_PATH=$OFFICE_HOME/program:.:
Then at the command line
ant -f mybuild.xml
And it runs, no IDE, no SDK.
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Rony G. Flatscher wrote:
However, *where* would one find the com.sun.star.lib.loader. package?
Look in the SDK/classes directory...
Get the SDK at api.openoffice.org
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED
the OOo rpm packages into your home
directory using the script on mirrors, just google for
openoffice.org/developer/install_scripts to get an idea.
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail
On 10/01/2007, at 9:30 AM, Joe Reid wrote:
Can someone point me in an appropiate direction to understanding this:
--
http://www.openoffice.org/issues/show_bug.cgi?id=49718
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For
On 30/12/2006, at 10:30 AM, Sam Domenico wrote:
Present operation: When a block of text containing a URL is pasted
into a text document, the application attempts to make a connection
to the URL target. If my firewall blocks this traffic, the
application blocks. I teach computer science
.
I think (a) only affects berkeleydb, so (b) or (c) are more likely.
In this case make sure ridljar and qadevOOo are built using the same
java?
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail
libgtk2.0-common - have you got that?
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
://qa.openoffice.org/issues/show_bug.cgi?id=70684
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
not
occur often ;)
This is similar to the earlier error, as the code is re-used in
binfilter. The error will be seen again in module sc. See issue
http://www.openoffice.org/issues/show_bug.cgi?id=70684
jim
--
---
that looks right!
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
? Unpack that somewhere (i suggest your
home dir) and see what is in there, and report back..
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
On 07/11/2006, at 10:30 AM, Jim Watson wrote:
Enno,
I think the best thing would be to download the released
installation that matches your solver version and use that one to
drop in your changes.
Enno,
i dont any other ideas. I am now downloading the 2.0.4 solver for
linux/intel
with the hash (assumes an error in downloading). Did
repeat the download and attempt to install to no avail.
Regards,
Hi,
I just tried here on iMac (intel) and it worked fine,
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED
the best thing would be to download the released installation
that matches your solver version and use that one to drop in your
changes.
jim
On 07/11/2006, at 2:56 AM, Enno Fennema wrote:
7) Make an installation set
cd $SRCROOT; source xxxEnv.Set; cd installation/instset_oo
build -u
is on mirrors in openoffice.org/developer/
install_scripts
To create a new OOo installation in ~/m192 I run it like this with
absolute paths
$ ./install_linux.sh /path/to/rpm /home/jim/m192
There are other ways and some probably better, but this will get you
started quickly. Look
bash. This changes the value returned by uname -m.
I didn't try this for a long time, as I think it would hide any bugs
based on wrong uses of uname -m.
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e
and fixed, while the
bug persists at
http://www.openoffice.org/issues/show_bug.cgi?id=33851
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
the relevant part of the message is:
cannot find -lXaw
Do you have libxaw? This should have caused an error from the
configure step. Try configure without using the flag --with-x, and
also check the configure --help in case some other flags are not needed.
jim
the issue in this case - users see that
this is clearly a bug or a defect, but the developer says the
behaviour is intended.
Users are not capable to define a specification so the bug will never
be fixed.
Too bad it is a serious defect that prevents wider adoption of OOo.
jim
backup copy!!! and
nothing saved. I can save the spreadsheet with SaveAs under a new
name.
have a look in Tools - Options - OOo - Paths, are those paths all valid?
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional
.
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
On 26/07/2006, at 7:59 PM, Martin Hollmichel wrote:
configure: error: unrecognized option: --disbale-cairo
snip
Does that look correct? Or have some things changed? Thanks.
-ben
--enable-spelchek ?
jim
.
Therefore i think you need to check out at least the source modules for
config_office and solenv and then run the configure and bootstrap as
described in the tools.openoffice.org
http://tools.openoffice.org/dev_docs/build_linux.html
jim
Sorry I dont have an idea about the dmake problem...
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
it!
Jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
this.
jim
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
available for your personal, non-commercial use
only.
...
We reserve the right to modify these Terms of Service from time to time without
notice
...
These Terms of Service constitute the entire agreement between the parties w
Such things are best avoided...
thanks
Jim
Quoting Jorn K Teutloff [EMAIL PROTECTED]:
Thanks Jim - great input. We never meant to limit the use of code found on
Koders.com, but I see how the verbiage might be interpreted as such. We
will get this reworded asap.
Jorn,
I did not see any problem about use of code found on the site
regards
Jim
demangle those symbols with c++filt for example:
[EMAIL PROTECTED]:~/ooo$ c++filt _ZN9ScCellObj13SetValue_ImplEd
ScCellObj::SetValue_Impl(double)
I guess the stacktrace is generated by signal.c see here:
http://ooo.ximian.com/lxr/source/porting/sal/osl/unx/signal.c
hope that helps,
jim
47 matches
Mail list logo
