[dpdk-dev] [PATCH v6 00/38] new bnxt poll mode driver library
On Tue, Jun 21, 2016 at 09:25:18AM -0500, Ajit Khaparde wrote: > Bruce, > We have a set of patches which add support to a couple of new Broadcom PCI > devices. > Should I use the dpdk-next-net/rel_16_07 to push them out? > Let me know if there is any other way to do this. > > Thanks > They should be based on dpdk-next-net/rel_16_07. However, be aware that it is very late in the DPDK 16.07 release cycle for us to take new content in, so please minimise the patchset to only the changes that are absolutely necessary for you. At this stage we can only take contributions on a best-effort basis, so having a smaller patchset will increase your chances that the patch may be merged. Regards, /Bruce > On Thu, Jun 16, 2016 at 1:51 PM, Ajit Khaparde > wrote: > > > > > On Thu, Jun 16, 2016 at 9:24 AM, Bruce Richardson < > > bruce.richardson at intel.com> wrote: > > > >> On Wed, Jun 15, 2016 at 02:23:00PM -0700, Stephen Hurd wrote: > >> > The bnxt poll mode library (librte_pmd_bnxt) implements support for > >> > Broadcom NetXtreme C-Series. These adapters support Standards- > >> > compliant 10/25/50Gbps 30MPPS full-duplex throughput. > >> > > >> > Information about this family of adapters can be found in the > >> > NetXtreme Brand section https://goo.gl/4H7q63 of the Broadcom web > >> > site http://www.broadcom.com/ > >> > > >> > With the current driver, allocated mbufs must be large enough to hold > >> > the entire received frame. If the mbufs are not large enough, the > >> > packets will be dropped. This is most limiting when jumbo frames are > >> > used. > >> > > >> > >> Applied to dpdk-next-net/rel_16_07 > >> > >> On apply I got conflicts with the nic overview document, so please check > >> the > >> resulting information in that document is correct in the next-net tree. > >> I also added a very short entry to the release notes for this new driver > >> as > >> part of patch 1, since that was missing. Please also check that for > >> correctness > >> and send on any additional comments/corrections you want on that. > >> > > Thanks Bruce. I had a cursory glance ?and it looked good. > > We will update the > > ?m? further > > if necessary. > > ? > > > > > >> Thanks for all the work on this driver. > >> > >> Regards, > >> /Bruce > >> > > > >
[dpdk-dev] [PATCH v6 00/38] new bnxt poll mode driver library
Bruce, We have a set of patches which add support to a couple of new Broadcom PCI devices. Should I use the dpdk-next-net/rel_16_07 to push them out? Let me know if there is any other way to do this. Thanks On Thu, Jun 16, 2016 at 1:51 PM, Ajit Khaparde wrote: > > On Thu, Jun 16, 2016 at 9:24 AM, Bruce Richardson < > bruce.richardson at intel.com> wrote: > >> On Wed, Jun 15, 2016 at 02:23:00PM -0700, Stephen Hurd wrote: >> > The bnxt poll mode library (librte_pmd_bnxt) implements support for >> > Broadcom NetXtreme C-Series. These adapters support Standards- >> > compliant 10/25/50Gbps 30MPPS full-duplex throughput. >> > >> > Information about this family of adapters can be found in the >> > NetXtreme Brand section https://goo.gl/4H7q63 of the Broadcom web >> > site http://www.broadcom.com/ >> > >> > With the current driver, allocated mbufs must be large enough to hold >> > the entire received frame. If the mbufs are not large enough, the >> > packets will be dropped. This is most limiting when jumbo frames are >> > used. >> > >> >> Applied to dpdk-next-net/rel_16_07 >> >> On apply I got conflicts with the nic overview document, so please check >> the >> resulting information in that document is correct in the next-net tree. >> I also added a very short entry to the release notes for this new driver >> as >> part of patch 1, since that was missing. Please also check that for >> correctness >> and send on any additional comments/corrections you want on that. >> > Thanks Bruce. I had a cursory glance ?and it looked good. > We will update the > ?m? further > if necessary. > ? > > >> Thanks for all the work on this driver. >> >> Regards, >> /Bruce >> > >
[dpdk-dev] [PATCH v6 00/38] new bnxt poll mode driver library
On Wed, Jun 15, 2016 at 02:23:00PM -0700, Stephen Hurd wrote: > The bnxt poll mode library (librte_pmd_bnxt) implements support for > Broadcom NetXtreme C-Series. These adapters support Standards- > compliant 10/25/50Gbps 30MPPS full-duplex throughput. > > Information about this family of adapters can be found in the > NetXtreme Brand section https://goo.gl/4H7q63 of the Broadcom web > site http://www.broadcom.com/ > > With the current driver, allocated mbufs must be large enough to hold > the entire received frame. If the mbufs are not large enough, the > packets will be dropped. This is most limiting when jumbo frames are > used. > Applied to dpdk-next-net/rel_16_07 On apply I got conflicts with the nic overview document, so please check the resulting information in that document is correct in the next-net tree. I also added a very short entry to the release notes for this new driver as part of patch 1, since that was missing. Please also check that for correctness and send on any additional comments/corrections you want on that. Thanks for all the work on this driver. Regards, /Bruce
[dpdk-dev] [PATCH v6 00/38] new bnxt poll mode driver library
On Thu, Jun 16, 2016 at 9:24 AM, Bruce Richardson < bruce.richardson at intel.com> wrote: > On Wed, Jun 15, 2016 at 02:23:00PM -0700, Stephen Hurd wrote: > > The bnxt poll mode library (librte_pmd_bnxt) implements support for > > Broadcom NetXtreme C-Series. These adapters support Standards- > > compliant 10/25/50Gbps 30MPPS full-duplex throughput. > > > > Information about this family of adapters can be found in the > > NetXtreme Brand section https://goo.gl/4H7q63 of the Broadcom web > > site http://www.broadcom.com/ > > > > With the current driver, allocated mbufs must be large enough to hold > > the entire received frame. If the mbufs are not large enough, the > > packets will be dropped. This is most limiting when jumbo frames are > > used. > > > > Applied to dpdk-next-net/rel_16_07 > > On apply I got conflicts with the nic overview document, so please check > the > resulting information in that document is correct in the next-net tree. > I also added a very short entry to the release notes for this new driver as > part of patch 1, since that was missing. Please also check that for > correctness > and send on any additional comments/corrections you want on that. > Thanks Bruce. I had a cursory glance ?and it looked good. We will update the ?m? further if necessary. ? > Thanks for all the work on this driver. > > Regards, > /Bruce >
[dpdk-dev] [PATCH v6 00/38] new bnxt poll mode driver library
The bnxt poll mode library (librte_pmd_bnxt) implements support for Broadcom NetXtreme C-Series. These adapters support Standards- compliant 10/25/50Gbps 30MPPS full-duplex throughput. Information about this family of adapters can be found in the NetXtreme Brand section https://goo.gl/4H7q63 of the Broadcom web site http://www.broadcom.com/ With the current driver, allocated mbufs must be large enough to hold the entire received frame. If the mbufs are not large enough, the packets will be dropped. This is most limiting when jumbo frames are used. Ajit Khaparde (38): bnxt: new driver for Broadcom NetXtreme-C devices bnxt: add HWRM init code bnxt: add driver register/unregister support bnxt: add dev infos get operation bnxt: add dev configure operation bnxt: add vnic functions and structs bnxt: declare generic ring structs and free() func bnxt: add completion ring support bnxt: add L2 filter alloc/init/free bnxt: add Tx queue operations (nonfunctional) bnxt: add Rx queue create/destroy operations bnxt: add statistics operations bnxt: add initial Tx code implementation bnxt: add initial Rx code implementation bnxt: add code to alloc/free Tx Rx and cmpl rings bnxt: add HWRM function reset command bnxt: add HWRM vnic alloc function bnxt: add HWRM vnic free function bnxt: add HWRM vnic configure function bnxt: add API to allow configuration of vnic bnxt: add HWRM API to configure RSS bnxt: add API for L2 Rx mask set/clear functions bnxt: add HWRM API for stats context allocation bnxt: add HWRM ring alloc/free functions bnxt: add ring group alloc/free functions bnxt: add HWRM stat context free function bnxt: add HWRM API to set and clear filters bnxt: allocate and free all HWRM rings and groups bnxt: add HWRM port PHY config call and helpers bnxt: add start/stop/link update operations bnxt: add promiscuous enable/disable operations bnxt: add all multicast enable/disable operations bnxt: free memory in close operation bnxt: add MAC address add/remove dev ops bnxt: add set link up/down operations bnxt: add reta update/query operations bnxt: add RSS device operations bnxt: add flow control operations MAINTAINERS |5 + config/common_base |5 + doc/guides/nics/bnxt.rst| 49 + doc/guides/nics/index.rst |1 + doc/guides/nics/overview.rst| 138 +- drivers/net/Makefile|1 + drivers/net/bnxt/Makefile | 73 + drivers/net/bnxt/bnxt.h | 176 + drivers/net/bnxt/bnxt_cpr.c | 159 + drivers/net/bnxt/bnxt_cpr.h | 86 + drivers/net/bnxt/bnxt_ethdev.c | 1049 drivers/net/bnxt/bnxt_filter.c | 175 + drivers/net/bnxt/bnxt_filter.h | 74 + drivers/net/bnxt/bnxt_hwrm.c| 1491 ++ drivers/net/bnxt/bnxt_hwrm.h| 104 + drivers/net/bnxt/bnxt_ring.c| 306 ++ drivers/net/bnxt/bnxt_ring.h| 103 + drivers/net/bnxt/bnxt_rxq.c | 319 ++ drivers/net/bnxt/bnxt_rxq.h | 74 + drivers/net/bnxt/bnxt_rxr.c | 367 ++ drivers/net/bnxt/bnxt_rxr.h | 62 + drivers/net/bnxt/bnxt_stats.c | 142 + drivers/net/bnxt/bnxt_stats.h | 44 + drivers/net/bnxt/bnxt_txq.c | 162 + drivers/net/bnxt/bnxt_txq.h | 75 + drivers/net/bnxt/bnxt_txr.c | 339 ++ drivers/net/bnxt/bnxt_txr.h | 71 + drivers/net/bnxt/bnxt_vnic.c| 277 ++ drivers/net/bnxt/bnxt_vnic.h| 80 + drivers/net/bnxt/hsi_struct_def_dpdk.h | 5799 +++ drivers/net/bnxt/rte_pmd_bnxt_version.map |4 + lib/librte_eal/common/include/rte_pci_dev_ids.h | 38 +- mk/rte.app.mk |1 + 33 files changed, 11775 insertions(+), 74 deletions(-) create mode 100644 doc/guides/nics/bnxt.rst create mode 100644 drivers/net/bnxt/Makefile create mode 100644 drivers/net/bnxt/bnxt.h create mode 100644 drivers/net/bnxt/bnxt_cpr.c create mode 100644 drivers/net/bnxt/bnxt_cpr.h create mode 100644 drivers/net/bnxt/bnxt_ethdev.c create mode 100644 drivers/net/bnxt/bnxt_filter.c create mode 100644 drivers/net/bnxt/bnxt_filter.h create mode 100644 drivers/net/bnxt/bnxt_hwrm.c create mode 100644 drivers/net/bnxt/bnxt_hwrm.h create mode 100644 drivers/net/bnxt/bnxt_ring.c create mode 100644 drivers/net/bnxt/bnxt_ring.h create mode 100644 drivers/net/bnxt/bnxt_rxq.c create mode 100644 drivers/net/bnxt/bnxt_rxq.h create mode 100644 drivers/net/bnxt/bnxt_rxr.c create mode 100644 drivers/net/bnxt/bnxt_rxr.h create
