s/Then example/Then enable/
On 3/17/23, Alan C. Assis wrote:
> Hi Gustavo,
>
> Enabling all the network needed features on NuttX is very time
> consuming, so this is a good idea to start with a working example.
>
> In this case nsh is not the recommended starting point, but wapi (wifi
> board
Hi,
Dont you need the full ESP-IDF to build the bootloader and stubs?
If you have a simplified build method I am interested.
Last time I checked esp32-c3, it worked perfectly, but the bootloader
build was a bit cumbersome (fortunately it's only needed once, which is
okay).
IIRC it even
I just noticed it is documented only for ESP32S2:
https://nuttx.apache.org/docs/latest/platforms/xtensa/esp32s2/index.html
Should be extended to ESP32, ESP32C3, ESP32C6 and ESP32S3.
BR,
Alan
On 3/17/23, Sebastien Lorquet wrote:
> Oh great, I'll test that, thanks!
>
> Sebastien
>
> Le
You need to download the "xtensa-esp32-elf"
No idea why they put xtensa-esp32-elf-gdb before the real toolchain.
On 3/17/23, Alan C. Assis wrote:
> Hi Miguel,
>
> Nice to hear it.
>
> BTW, you don't need to use esp-idf, it is overkill (you will waste too
> much disc space).
>
> Just download
Hello!
I started working on a project for my university. The idea is to make a
smart home proxy using NuttX and ESP32-devkitc.
I tested the already available configs(wifi/ble/sta_softap/blewifi) to see
if they work and they seem fine using the stable release V10.3.0.
Using the latest version I
Hi Miguel,
Nice to hear it.
BTW, you don't need to use esp-idf, it is overkill (you will waste too
much disc space).
Just download the latest Xtensa ESP32 toolchain:
https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/tools/idf-tools.html#custom-installation
BR,
Alan
On
Yes, it is not needed!
After configuring your esp32c3 board file (also works for any esp32xx
chip), just run:
make bootloader
make flash ESPTOOL_PORT=/dev/ttyUSB0 ESPTOOL_BINDIR=.
BR,
Alan
On 3/17/23, Sebastien Lorquet wrote:
> Hi,
>
> Dont you need the full ESP-IDF to build the bootloader
Hi Gustavo,
Enabling all the network needed features on NuttX is very time
consuming, so this is a good idea to start with a working example.
In this case nsh is not the recommended starting point, but wapi (wifi
board profile).
Try this sequence:
make distclean
./tools/configure.sh
Alan
Here is compiling, after use
make distclean
./tools/configure.sh esp32-devkitc:wapi
Gustavo, did you use the last update of esp-idf ?
[cid:70bddf51-e6f1-4a78-867e-90ffdda495e5]
De: Alan C. Assis
Enviado: sexta-feira, 17 de março de 2023 11:52
Para:
Oh great, I'll test that, thanks!
Sebastien
Le 17/03/2023 à 15:13, Alan C. Assis a écrit :
Yes, it is not needed!
After configuring your esp32c3 board file (also works for any esp32xx
chip), just run:
make bootloader
make flash ESPTOOL_PORT=/dev/ttyUSB0 ESPTOOL_BINDIR=.
BR,
Alan
On
Hi, Alan!
Thank you and Petro for the support, it's compiling now! I also connected
the esp to the internet, but for some reason both 'nslookup' and 'ping' are
failing and when I start the webserver it gets stuck in the 'starting
webserver' message.
Em sex., 17 de mar. de 2023 às 08:52, Alan C.
On 3/17/23, Nathan Hartman wrote:
> On Wed, Mar 15, 2023 at 6:16 AM raiden00pl wrote:
>>
>> NVMC support for NRF52 chips was ported from Nordic SDK which was
>> released
>> on the BSD license (old times), so these features should depend on
>> CONFIG_ALLOW_BSD_COMPONENTS=y. Users must manually
On Wed, Mar 15, 2023 at 6:16 AM raiden00pl wrote:
>
> NVMC support for NRF52 chips was ported from Nordic SDK which was released
> on the BSD license (old times), so these features should depend on
> CONFIG_ALLOW_BSD_COMPONENTS=y. Users must manually enable support for the
> BSD components to
CONGRATZ!! :-)
--
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
Hello Gustavo,
By "connected esp to the internet" do you mean that your board has public
IP (not in the local network) or accessible via NAT?
Because if you just connect board to home WiFi router that provides
Internet, this is not "connected esp to the internet". If that is the case,
then
I have been tinkering with Chrome OS recently just to keep myself
informed. If anyone cares, I have been able to build and run the NuttX
simulator on Chrome OS. Debian Linux is available on Chrome OS, so why
is this a thing?
- A ChromeBook is a highly memory constrained platform and it is
On Fri, Mar 17, 2023 at 12:07 PM Alan C. Assis wrote:
> On 3/17/23, Nathan Hartman wrote:
> > On Wed, Mar 15, 2023 at 6:16 AM raiden00pl wrote:
> >>
> >> NVMC support for NRF52 chips was ported from Nordic SDK which was
> >> released
> >> on the BSD license (old times), so these features
Please run: ifconfig
Did you connect correctly to your WiFi router?
BR,
Alan
On 3/17/23, Gustavo Soares wrote:
> I've defined the default gateway and the router IP in the menuconfig like
> this:
>
> Library Routines
> ├── NETDB Support
> ├── DNS Name Resolution
> ├──
I got success
Waiting for my student get too
talking with him now
[cid:d2a6da37-e56f-4ff1-b819-55b2248fb1c0]
[cid:9f579613-079c-43ac-bccb-b9892d9da13c]
De: Alan C. Assis
Enviado: sexta-feira, 17 de março de 2023 18:36
Para: dev@nuttx.apache.org
Assunto: Re:
I've defined the default gateway and the router IP in the menuconfig like
this:
Library Routines
├── NETDB Support
├── DNS Name Resolution
├── Target IPv4 address (default gateway)
Application Configuration
├── Network Utilities
├── Network Initialization
On 3/17/2023 7:08 PM, Bill Rees wrote:
Does the BSD license,and maybe others too, allow re-licensing?
Certainly one way to solve this if true is to simply change the
license.
I think that the answer is YES, but NO. Let's talk about the YES
first. People do apply a new license to BSD
Does the BSD license,and maybe others too, allow re-licensing?
Certainly one way to solve this if true is to simply change the license.
On 3/17/2023 10:05 AM, Nathan Hartman wrote:
On Fri, Mar 17, 2023 at 12:07 PM Alan C. Assis wrote:
On 3/17/23, Nathan Hartman wrote:
On Wed, Mar
Hello world :-)
What is the current support of CAN / ESP32's TWAI on NuttX?
What hardware interface bus modules would you recommend?
I would like to use this bus for bidirectional remote control unit
with some buttons and display on ~5m cable :-)
Any hints welcome :-)
Tomek
--
CeDeROM,
23 matches
Mail list logo
