Re: [VOTE] Release of Apache Ratis (incubating) 0.2.0 (rc1)
Thanks for creating a new release Marton. +1 Tested Ozone with latest ratis and ran data I/O operation using Freon. Thanks, Mukul On 22/05/18, 7:22 AM, "Jitendra Pandey"wrote: Moving my vote to the right thread. +1 Downloaded the source, verified signatures and ran some unit tests. On 5/21/18, 3:09 PM, "Venkat" wrote: +1 Checked sigatures/hashes.The archive name does not have apache prefix - already raised in this vote thread. Built and ran tests - there were some timeouts running ratis servers tests in a couple of runs (could be environmental issues) , but all tests passed in a subsequent execution. . Venkat On Mon, May 21, 2018 at 1:48 PM, Jakob Homan wrote: > +1 (binding) > > * Checked sigs/hash > * Spot checked tests > * Checked on the copyright year (thanks) > * Built per instructions, which worked this time. > > Nit: > * Didn't notice this last time, but the artifacts should > apache-ratis-incubator-0.2.0-src.tar.gz rather than > ratis-incubator-0.2.0-src.tar.gz. The IPMC will likely let this slide > until the next release. > > -Jakob > > > On 18 May 2018 at 11:20, Tsz Wo Sze wrote: >> Thanks Marton. >> >> We can generate mds by "gpg --print-mds ". See also >> ratis/dev-support/make_rc.sh >> >> Tsz-Wo >> >> On Fri, May 18, 2018 at 5:49 AM, Elek, Marton wrote: >>> I just found (thanks to RATIS-241) that the previous release provided mds >>> files as checksum. So I just added mds files as well (you can see that the >>> sha hash is the same). >>> >>> But as I don't know any easy method to verify the mds files [1] I would link >>> the sha-512 from the ratis web page. >>> >>> Please check the release candidate and vote. >>> >>> Thanks >>> Marton >>> >>> [1] >>> https://superuser.com/questions/1117048/how-to-verify-checksum-in-a-mds-file-format >>> >>> >>> >>> On 05/16/2018 11:50 PM, Elek, Marton wrote: Hi all, I'd like to restart the vote to release Apache Ratis (incubating) 0.2.0 as we fixed all the previously discussed issues. This is the second incubator release and it includes more than 120 improvements and fixes since the previous 0.1.0-alpha release. This is the first release which includes a binary package with ready to use example project. All distribution packages, including signatures, digests, etc. can be found at: https://dist.apache.org/repos/dist/dev/incubator/ratis/0.2.0/rc1 Staged artifacts can be found at: https://repository.apache.org/content/repositories/orgapacheratis-1004 This release has been signed with PGP key 0EE79B28, corresponding to e...@apache.org, which is included in the repository's KEYS file (https://dist.apache.org/repos/dist/dev/incubator/ratis/KEYS). This key can be found on keyservers, such as: http://pgp.mit.edu/pks/lookup?op=get=0x0EE79B28 Or in the apache phonebook: https://people.apache.org/keys/committer/elek.asc The release candidate has been tagged in git with ratis-0.2.0-rc1 (bd234f25c29e918ad3db88bfedcc2d6931221a3e) https://github.com/apache/incubator-ratis/releases/tag/ratis-0.2.0-rc1 Please review and vote. The vote will be open for at least 72 hours. If the vote passed, the second stage vote will be called on the Apache incubator mailing list to get approval from the Incubator PMC. # Review/testing You can check the usual requirements of an apache release: • Signatures • Checksums • License and notice files • Disclaimer file (incubator!) • Build the project from the source code package (mvn clean install assembly:single -DskipTests=true ) • Licence headers The binary papckage can be smoketested with:
Re: [VOTE] Release of Apache Ratis (incubating) 0.2.0 (rc1)
Moving my vote to the right thread. +1 Downloaded the source, verified signatures and ran some unit tests. On 5/21/18, 3:09 PM, "Venkat"wrote: +1 Checked sigatures/hashes.The archive name does not have apache prefix - already raised in this vote thread. Built and ran tests - there were some timeouts running ratis servers tests in a couple of runs (could be environmental issues) , but all tests passed in a subsequent execution. . Venkat On Mon, May 21, 2018 at 1:48 PM, Jakob Homan wrote: > +1 (binding) > > * Checked sigs/hash > * Spot checked tests > * Checked on the copyright year (thanks) > * Built per instructions, which worked this time. > > Nit: > * Didn't notice this last time, but the artifacts should > apache-ratis-incubator-0.2.0-src.tar.gz rather than > ratis-incubator-0.2.0-src.tar.gz. The IPMC will likely let this slide > until the next release. > > -Jakob > > > On 18 May 2018 at 11:20, Tsz Wo Sze wrote: >> Thanks Marton. >> >> We can generate mds by "gpg --print-mds ". See also >> ratis/dev-support/make_rc.sh >> >> Tsz-Wo >> >> On Fri, May 18, 2018 at 5:49 AM, Elek, Marton wrote: >>> I just found (thanks to RATIS-241) that the previous release provided mds >>> files as checksum. So I just added mds files as well (you can see that the >>> sha hash is the same). >>> >>> But as I don't know any easy method to verify the mds files [1] I would link >>> the sha-512 from the ratis web page. >>> >>> Please check the release candidate and vote. >>> >>> Thanks >>> Marton >>> >>> [1] >>> https://superuser.com/questions/1117048/how-to-verify-checksum-in-a-mds-file-format >>> >>> >>> >>> On 05/16/2018 11:50 PM, Elek, Marton wrote: Hi all, I'd like to restart the vote to release Apache Ratis (incubating) 0.2.0 as we fixed all the previously discussed issues. This is the second incubator release and it includes more than 120 improvements and fixes since the previous 0.1.0-alpha release. This is the first release which includes a binary package with ready to use example project. All distribution packages, including signatures, digests, etc. can be found at: https://dist.apache.org/repos/dist/dev/incubator/ratis/0.2.0/rc1 Staged artifacts can be found at: https://repository.apache.org/content/repositories/orgapacheratis-1004 This release has been signed with PGP key 0EE79B28, corresponding to e...@apache.org, which is included in the repository's KEYS file (https://dist.apache.org/repos/dist/dev/incubator/ratis/KEYS). This key can be found on keyservers, such as: http://pgp.mit.edu/pks/lookup?op=get=0x0EE79B28 Or in the apache phonebook: https://people.apache.org/keys/committer/elek.asc The release candidate has been tagged in git with ratis-0.2.0-rc1 (bd234f25c29e918ad3db88bfedcc2d6931221a3e) https://github.com/apache/incubator-ratis/releases/tag/ratis-0.2.0-rc1 Please review and vote. The vote will be open for at least 72 hours. If the vote passed, the second stage vote will be called on the Apache incubator mailing list to get approval from the Incubator PMC. # Review/testing You can check the usual requirements of an apache release: • Signatures • Checksums • License and notice files • Disclaimer file (incubator!) • Build the project from the source code package (mvn clean install assembly:single -DskipTests=true ) • Licence headers The binary papckage can be smoketested with: ./examples/bin/start-all.sh ./examples/bin/client.sh assign --name a --value 2 ./examples/bin/client.sh get --name a Starting with my vote: +1 Thanks, Marton
Re: [VOTE] Release of Apache Ratis (incubating) 0.2.0 (rc1)
+1 Checked sigatures/hashes.The archive name does not have apache prefix - already raised in this vote thread. Built and ran tests - there were some timeouts running ratis servers tests in a couple of runs (could be environmental issues) , but all tests passed in a subsequent execution. . Venkat On Mon, May 21, 2018 at 1:48 PM, Jakob Homanwrote: > +1 (binding) > > * Checked sigs/hash > * Spot checked tests > * Checked on the copyright year (thanks) > * Built per instructions, which worked this time. > > Nit: > * Didn't notice this last time, but the artifacts should > apache-ratis-incubator-0.2.0-src.tar.gz rather than > ratis-incubator-0.2.0-src.tar.gz. The IPMC will likely let this slide > until the next release. > > -Jakob > > > On 18 May 2018 at 11:20, Tsz Wo Sze wrote: >> Thanks Marton. >> >> We can generate mds by "gpg --print-mds ". See also >> ratis/dev-support/make_rc.sh >> >> Tsz-Wo >> >> On Fri, May 18, 2018 at 5:49 AM, Elek, Marton wrote: >>> I just found (thanks to RATIS-241) that the previous release provided mds >>> files as checksum. So I just added mds files as well (you can see that the >>> sha hash is the same). >>> >>> But as I don't know any easy method to verify the mds files [1] I would link >>> the sha-512 from the ratis web page. >>> >>> Please check the release candidate and vote. >>> >>> Thanks >>> Marton >>> >>> [1] >>> https://superuser.com/questions/1117048/how-to-verify-checksum-in-a-mds-file-format >>> >>> >>> >>> On 05/16/2018 11:50 PM, Elek, Marton wrote: Hi all, I'd like to restart the vote to release Apache Ratis (incubating) 0.2.0 as we fixed all the previously discussed issues. This is the second incubator release and it includes more than 120 improvements and fixes since the previous 0.1.0-alpha release. This is the first release which includes a binary package with ready to use example project. All distribution packages, including signatures, digests, etc. can be found at: https://dist.apache.org/repos/dist/dev/incubator/ratis/0.2.0/rc1 Staged artifacts can be found at: https://repository.apache.org/content/repositories/orgapacheratis-1004 This release has been signed with PGP key 0EE79B28, corresponding to e...@apache.org, which is included in the repository's KEYS file (https://dist.apache.org/repos/dist/dev/incubator/ratis/KEYS). This key can be found on keyservers, such as: http://pgp.mit.edu/pks/lookup?op=get=0x0EE79B28 Or in the apache phonebook: https://people.apache.org/keys/committer/elek.asc The release candidate has been tagged in git with ratis-0.2.0-rc1 (bd234f25c29e918ad3db88bfedcc2d6931221a3e) https://github.com/apache/incubator-ratis/releases/tag/ratis-0.2.0-rc1 Please review and vote. The vote will be open for at least 72 hours. If the vote passed, the second stage vote will be called on the Apache incubator mailing list to get approval from the Incubator PMC. # Review/testing You can check the usual requirements of an apache release: • Signatures • Checksums • License and notice files • Disclaimer file (incubator!) • Build the project from the source code package (mvn clean install assembly:single -DskipTests=true ) • Licence headers The binary papckage can be smoketested with: ./examples/bin/start-all.sh ./examples/bin/client.sh assign --name a --value 2 ./examples/bin/client.sh get --name a Starting with my vote: +1 Thanks, Marton
Re: [VOTE] Release of Apache Ratis (incubating) 0.2.0 (rc1)
Thanks Marton. We can generate mds by "gpg --print-mds ". See also ratis/dev-support/make_rc.sh Tsz-Wo On Fri, May 18, 2018 at 5:49 AM, Elek, Martonwrote: > I just found (thanks to RATIS-241) that the previous release provided mds > files as checksum. So I just added mds files as well (you can see that the > sha hash is the same). > > But as I don't know any easy method to verify the mds files [1] I would link > the sha-512 from the ratis web page. > > Please check the release candidate and vote. > > Thanks > Marton > > [1] > https://superuser.com/questions/1117048/how-to-verify-checksum-in-a-mds-file-format > > > > On 05/16/2018 11:50 PM, Elek, Marton wrote: >> >> >> Hi all, >> >> I'd like to restart the vote to release Apache Ratis (incubating) 0.2.0 as >> we fixed all the previously discussed issues. >> >> >> >> This is the second incubator release and it includes more than 120 >> improvements and fixes since the previous 0.1.0-alpha release. This is the >> first release >> which includes a binary package with ready to use example project. >> >> All distribution packages, including signatures, digests, etc. can be >> found at: >> >> https://dist.apache.org/repos/dist/dev/incubator/ratis/0.2.0/rc1 >> >> Staged artifacts can be found at: >> >> https://repository.apache.org/content/repositories/orgapacheratis-1004 >> >> >> This release has been signed with PGP key 0EE79B28, corresponding to >> e...@apache.org, which is included in the repository's KEYS file >> (https://dist.apache.org/repos/dist/dev/incubator/ratis/KEYS). >> >> This key can be found on keyservers, such as: >> >> http://pgp.mit.edu/pks/lookup?op=get=0x0EE79B28 >> >> Or in the apache phonebook: >> >> https://people.apache.org/keys/committer/elek.asc >> >> >> The release candidate has been tagged in git with ratis-0.2.0-rc1 >> (bd234f25c29e918ad3db88bfedcc2d6931221a3e) >> >> https://github.com/apache/incubator-ratis/releases/tag/ratis-0.2.0-rc1 >> >> >> >> Please review and vote. The vote will be open for at least 72 hours. >> >> If the vote passed, the second stage vote will be called on the Apache >> incubator mailing list to get approval from the Incubator PMC. >> >> >> >> # Review/testing >> >> You can check the usual requirements of an apache release: >> >> • Signatures >> • Checksums >> • License and notice files >> • Disclaimer file (incubator!) >> • Build the project from the source code package (mvn clean install >> assembly:single -DskipTests=true ) >> • Licence headers >> >> The binary papckage can be smoketested with: >> >> ./examples/bin/start-all.sh >> ./examples/bin/client.sh assign --name a --value 2 >> ./examples/bin/client.sh get --name a >> >> >> >> Starting with my vote: +1 >> >> Thanks, >> Marton