On Thu, Jul 17, 2014 at 9:21 PM, Gonzalo Odiard godi...@sugarlabs.org wrote:
Do you have a abiword rpm with introspection enabled?
Hint: we use a custom rpm
http://harvest.one-education.org/public/au1b-updates/RPMS/abiword-2.9.3-1.git20121011.fc18.olpc12.armv7hl.rpm
The error that he's
Hi Scott,
On Sat, May 10, 2014 at 11:55 AM, Scott Chapman sc...@mischko.com wrote:
We don't have opengl support in the X drivers because of the video type on
these?
There is indeed a GPU capable of 3D graphics in the hardware, but we
never completed the engineering effort required to make
On Sat, May 10, 2014 at 12:40 PM, Scott Chapman sc...@mischko.com wrote:
Paul,
The Gnome Control Panel is not present in the build. Am I missing something
or is it left out also?
You aren't missing anything - based on feedback from OLPC's
deployments we always tried to ship a minimal GNOME
On Wed, May 7, 2014 at 9:01 PM, Daniel Narvaez dwnarv...@gmail.com wrote:
On 7 May 2014 01:44, James Cameron qu...@laptop.org wrote:
On Tue, May 06, 2014 at 04:24:39PM +0200, Daniel Narvaez wrote:
[...] And with the XO stuck on Fedora 18 we might not have good
enough introspection to make
Hi,
When booting the XO-1.75 with the check key pressed, 2-digit boot
codes fill the screen briefly before OFW boots the system.
Can anyone remind me where these numbers are defined in the code? I
know it's in cforth git somewhere...
Thanks
Daniel
___
On Tue, Dec 17, 2013 at 7:50 AM, Martin Langhoff
martin.langh...@gmail.com wrote:
On Tue, Dec 17, 2013 at 4:07 AM, Basanta Shrestha
basanta.shres...@olenepal.org wrote:
yes it works! But the value goes back to original ie. '1' after reboot and
/etc/rc.local doesn't work here.
It works, but
Hi Basanta,
On Thu, Nov 21, 2013 at 4:27 AM, Basanta Shrestha
basanta.shres...@olenepal.org wrote:
Dear all,
We are planing on using a different keyboard layout for XO4. The new layout
we think is phonetically based and easier for children. I simply switched the
/usr/share/X11/symbols/np
On Fri, Dec 13, 2013 at 4:49 AM, Basanta Shrestha
basanta.shres...@olenepal.org wrote:
Its SynRelPS/2
And I created file /etc/modprobe.d/olpc-psmouse.conf with line
options psmouse proto=bare taptoclick=1
But it altogether made my touchpad to stop functioning.
Looks like that wiki page is
On Tue, Nov 12, 2013 at 10:14 PM, Basanta Shrestha
basanta.shres...@olenepal.org wrote:
Amazingly changing the manufacturing data didn't do the job but changing
/etc/sysconfig/keyboard did. Wow! Now I have Nepali input system. Thank you
all.
Now I need to find a place to change default locale
On Sun, Nov 10, 2013 at 5:18 PM, James Cameron qu...@laptop.org wrote:
If you need to scale up this change to many laptops, contact
reu...@laptop.org or myself. I must know the SKU number.
In the particular case of changing language/keyboard defaults as we
are discussing, instead of changing
On Thu, Nov 7, 2013 at 11:23 PM, Basanta Shrestha
basanta.shres...@olenepal.org wrote:
But for XO-4 we will just be getting ones with English layout. I was
wondering how we can enable nepali keyboard input on it.
Are these keyboards hard/clicky/high-school style, or soft/membrane?
Daniel
Hi,
German R in Nicaragua identified a problem with xs-rsync, where some
files in the OS builds served to XOs are sent with bad permissions.
This fails olpc-update's verification checks, and the systems can't
update.
This was a bug in fakeroot, not processing internal messages
correctly, and
Hi,
Upgrading from 12.1.0 to 13.2.0 results in previous wifi connections
not re-activating (haven't tried 13.1.0).
This was a NetworkManager bug:
https://mail.gnome.org/archives/networkmanager-list/2013-September/msg00018.html
Fixed in NetworkManager-0.9.8.1-3.git20130514.fc18.olpc1 available
Hi,
2 recent updates to xs-activity-server, new version 0.4.0 published just now:
1. Dotted activity versions (e.g. Browse-149.3) are now supported.
2. Separated input and output a bit better, easier to use with puppet
and similar. Use rsync to sync your activities into
Hi,
http://rpmdropbox.laptop.org/f18/ now includes
pygobject3-3.4.2-6.fc18.olpc2 (on 13.2.0 developers can install with
yum update pygobject3)
This new package includes some optimizations from pygobject upstream.
I can't say the improvement is as visible as I was hoping for, but
some progress
On Sun, Aug 25, 2013 at 5:30 PM, Carlos Rafael Giani
d...@pseudoterminal.org wrote:
Now for human observation: there is no flicker problem.
Interesting. Try again with this video please:
http://download.openbricks.org/sample/H264/SampleClip.m4v
With this one, I could definitely see flickering
Hi,
olpc-os-builder master now includes a few updates to build for rawhide
(currently F21). This work is experimental, for developers. The main
reason I did it was to have an easy platform to check the latest Sugar
against the latest pygobject etc.
Various things broken, some things working :)
Hi Carlos,
I have given your gstreamer-1.0 plugins a spin on XO-4. Thanks for
working on this.
I additionally installed gstreamer1-plugins-bad-free for the mpeg4
container support and I'm testing with this video:
On Thu, Aug 22, 2013 at 6:48 AM, Carlos Rafael Giani
d...@pseudoterminal.org wrote:
First, I will paste from a chat I had in IRC with an X and Wayland
developer:
dv_ are you familiar with xvideo together with xshm?
dv_ if not, who could know about internals?
daniels hi, sure
daniels what
On Wed, Aug 21, 2013 at 12:02 AM, Carlos Rafael Giani
d...@pseudoterminal.org wrote:
I have written GStreamer 1.0 plugins for vMeta . You can find it here:
https://github.com/dv1/gst-vmeta
Excellent! Thanks for working on this and sharing it.
It looks like you have rewritten the plugin more or
On Wed, Aug 21, 2013 at 8:03 AM, Carlos Rafael Giani
d...@pseudoterminal.org wrote:
Yes, it is written from scratch. First, I wanted to use the GStreamer video
decoder base class, which the Marvell decoder didn't. Second, the Marvell
code uses many hacks that simply won't translate to GStreamer
On Thu, Aug 15, 2013 at 6:27 PM, Mark Brown broo...@kernel.org wrote:
Yes, we try not to. I do not recall the technical arguments in full,
Daniel would, but they included very limited processing power, very
limited memory, it didn't work when we first tried it, and a suite of
applications
On Fri, Aug 16, 2013 at 12:01 PM, Mark Brown broo...@sirena.org.uk wrote:
Do you know if a mainline kernel will actually run sensibly on your
system? I have a XO-1.75 (this was part of the reason I was looking)
but I'm mostly interested in advancing the state of the art.
I am working on that
On Mon, Aug 12, 2013 at 5:48 PM, James Cameron qu...@laptop.org wrote:
Yes. I would prefer if olpc-os-builder could operate in two modes;
one where it did all the downloads, and a separate one where it can be
used offline. This is what I did for mktinycorexo.
Try the --cache-only option.
On Sat, Aug 10, 2013 at 10:29 AM, David Farning
dfarn...@activitycentral.com wrote:
The is an example of the opportunities and potential challenges that
can occur between the community and the Association. This is why I was
very pleased that the XSCE-XS thread last week shifted to
On Thu, Aug 8, 2013 at 1:47 AM, David Farning
dfarn...@activitycentral.com wrote:
This disruption is particularly evident in the relationship between
XSCE and OLPC. Long term, XSCE _might_ be valuable to OLPC in their
role as The world food bank of education. Short term. in their roles
as a
On Thu, Jul 18, 2013 at 3:15 PM, Kevin Cole dc.l...@gmail.com wrote:
I thought I had given sufficient detail, but...
Your original mail raised several questions which the additional
detail below answer perfectly clearly, thanks.
On the first day of summer vacation, I went downtown to look for
On Tue, Jul 16, 2013 at 10:52 PM, Julian Goldstein
julian.goldste...@gmail.com wrote:
Here are the logs for the hello world and turtle art.
This is an incompatibility between old sugar-toolkit-gtk3 versions and
new pygobject versions. You need to update your version of
sugar-toolkit-gtk3 where
Please keep the list on CC.
On Wed, Jul 17, 2013 at 11:00 AM, Julian Goldstein
julian.goldste...@gmail.com wrote:
Should I just apt-get those packages?
I don't know, sorry. Here we generally work with Fedora where these
things are known to be working.
Daniel
On Wed, Jul 17, 2013 at 11:28 AM, Julian Goldstein
julian.goldste...@gmail.com wrote:
Ok thanks! I may just install Fedora then. Is there any C, or non-GUI stuff
I can contribute with on Ubuntu like any low level projects?
We normally do have a short wishlist for the components sits directly
Hi,
We're pleased to announce the release of OLPC OS 13.2.0 for XO-1,
XO-1.5, XO-1.75 and XO-4. Details of new features, known issues, and
how to download/install/upgrade can all be found in the release notes:
http://wiki.laptop.org/go/Release_notes/13.2.0
Many thanks to all contributors,
Hi,
We're pleased to announce the next release candidate of our new 13.2.0
software release. Probably the final build.
Information and installation instructions can be found here:
http://wiki.laptop.org/go/Release_notes/13.2.0
Quick links for those who know which files need to be grabbed and
On Fri, Jul 5, 2013 at 5:47 PM, James Cameron qu...@laptop.org wrote:
The DAC volume control has the greatest range, all the way down to
-96.625 dB, which coupled to our XO-1.75 hardware is effectively
silent, but not guaranteed to be. You can see the details of this
control in the XO-1.75
Hi,
I ran Clock-12.5 on 11.3.1, 12.1.0 and 13.2.0 build 11, all on the
same XO-1, to see if we have any difference in startup time. This is a
GTK2 activity.
Launching 10 times from hot caches and averaging, my measurements are:
11.3.1: 12.52 seconds
12.1.0: 11.53 seconds
13.2.0: 11.74 seconds
Hi,
On Fri, Jul 5, 2013 at 12:40 AM, James Cameron qu...@laptop.org wrote:
Fixed for XO-4 in:
http://dev.laptop.org/git/olpc-kernel/commit/?h=arm-3.5id=e77de3d4ec7589af2e88014018c69528ceab3293
Thanks for looking at this.
I'm trying to review the change. I am a bit stuck though, because I
On Thu, Jul 4, 2013 at 2:53 AM, Gonzalo Odiard gonz...@laptop.org wrote:
No inconsistency here.
Most of the activities you see slower were ported to Gtk3.
Tam-tam suit, speak, calculate, turtle art, maze, moon, record were not
ported
scratch and etoys are not related with Gtk
Browse received
On Thu, Jul 4, 2013 at 12:48 PM, Yioryos Asprobounitis
mavrot...@yahoo.com wrote:
Tried the following little script but I can not find a way to get the output
of 'time' command to the output.txt file.
Not really sure what you are trying to do here - sugar-launch will not
return until the
On Thu, Jul 4, 2013 at 2:00 PM, Yioryos Asprobounitis
mavrot...@yahoo.com wrote:
The following script appears to work as expected, but is the result valid?
That's hard to judge without having an explanation for what you are
trying to measure. I can't immediately see your intentions from
reading
On Thu, Jul 4, 2013 at 2:13 PM, Jerry Vonau jvo...@shaw.ca wrote:
Of the total available, would that not be a 100% increase in CPU time
used by the process running X?
What do you mean by the process running X?
The parent process of the X process?
Daniel
On Mon, Jul 1, 2013 at 1:55 AM, Yioryos Asprobounitis
mavrot...@yahoo.com wrote:
Another little issue is that clicking on the scroll bar in epiphany (and also
gedit and terminal) moves the page to the cursor instead of 1 page down.
This was a GNOME design decision. It is configurable
On Thu, Jun 27, 2013 at 8:08 AM, NoiseEHC noise...@gmail.com wrote:
which updated a lot of packages and my program finally started. If I compile
with webkitgtk1 then it runs, with webkitgtk2 it crashes.
The crash (SIGSEGV) happens in glXCreateContext in /lib/ligBL.so.1
As I do not really
Hi,
We're pleased to announce the next release candidate of our new 13.2.0
software release.
Information and installation instructions can be found here:
http://wiki.laptop.org/go/Release_notes/13.2.0
Quick links for those who know which files need to be grabbed and save
to USB disks:
On Thu, Jun 27, 2013 at 1:11 PM, NoiseEHC noise...@gmail.com wrote:
Now I looked at the source of webkit2gtk and it seems that opengl support is
compiled into the library or not, so if OPENGL is specified then it will
call into libGL.so and will crash. Maybe we should not lie about 3d support?
On Thu, Jun 20, 2013 at 9:28 AM, Juan Cubillo jcubi...@fundacionqt.org wrote:
Hello,
Quick question I have two 1.75XO that make a beep beep sound while
booting instead of the usual XO booting sound. Why is this so? Can this be
changed?
This likely means that you are running a new firmware
On Thu, Jun 20, 2013 at 11:36 AM, Juan Cubillo jcubi...@fundacionqt.org wrote:
That might be an option, but not in my case. Both XOs have Build 13.0.1 and
Firmware Q4D28.
I'll wait for James to wake up :)
In the mean time maybe you can explain why changing firmware version
and/or OS version
Hi,
Here is a quick XO-4-only build with a memory corruption fix in the
XO-4 wireless driver (#12701). Part of our ongoing work to fix
stability issues preventing successful factory testing.
http://download.laptop.org/xo-4/os/candidate/13.2.0-10/
Daniel
On Wed, Jun 12, 2013 at 8:08 PM, Juan Cubillo jcubi...@fundacionqt.org wrote:
Thank you for the info!
Yeah the ../docs/... was a typo... I was looking inside ../doc/
I also always wondered why the wiki instructions didn't used yum to install
the software... another mystery solved!
That is
clock drivers for clocks to be defined
in the device tree. This will be used on OLPC MMP2/MMP3-based laptops.
If clock info cannot be found in the device tree, we fall back to the
static clock initialization already present.
Signed-off-by: Daniel Drake d...@laptop.org
---
.../devicetree/bindings
On Thu, Jun 13, 2013 at 11:56 AM, Paul Fox p...@laptop.org wrote:
does this imply a future flag day, at which time new firmware will be
incompatible with old kernels, and vice-versa?
Unfortunately even without the DT changes described here, old firmware
versions already will not be able to boot
On Wed, Jun 12, 2013 at 12:39 PM, Juan Cubillo jcubi...@fundacionqt.org wrote:
Hello,
I just flashed a 1.75XO with the stable 13.1.0 image from OLPC. Then, I
installed OOB via yum install olpc-os-builder
I wanted to build a test image but no example files were installed in
/usr/share/docs/
Hi,
I am looking at upstreaming these patches:
http://dev.laptop.org/~dsd/20130611/0003-ARM-mmp-Fix-MMP2-interrupt-controller-DT-nodes.patch
http://dev.laptop.org/~dsd/20130611/0004-ARM-mmp-irq-Use-of_get_address-instead-of-of_address.patch
Could one of you summarise the background here, and
Sorry - I sent this out yesterday but with the wrong subject line.
On Mon, Jun 10, 2013 at 4:56 PM, Daniel Drake d...@laptop.org wrote:
Hi,
We're pleased to announce the next release candidate of our new 13.2.0
software release.
Information and installation instructions can be found here
Hi,
We're pleased to announce the next release candidate of our new 13.2.0
software release.
Information and installation instructions can be found here:
http://wiki.laptop.org/go/Release_notes/13.2.0
Quick links for those who know which files need to be grabbed and save
to USB disks:
Hi,
Those of us familiar with setting up school networks (server + switch
+ APs) in some of our deployments will be familiar with the
occasional loss of hardware, due to surges in the low quality
electrical supply or whatever, even when the system is protected by a
cheap UPS which supposedly
Hi,
Those of us familiar with setting up school networks (server + switch
+ APs) in some of our deployments will be familiar with the
occasional loss of hardware, due to surges in the low quality
electrical supply or whatever, even when the system is protected by a
cheap UPS which supposedly
On Wed, May 29, 2013 at 11:50 PM, Peter Robinson pbrobin...@gmail.com wrote:
Firefox and xulrunner 17 are the late known good (and matching) builds
for Fedora 17, you need the major versions to be matching (so
12/13/17) but if you were pulling in all the latest stable updates
into the build
Hi,
We're pleased to announce the next release candidate of our new 13.2.0
software release.
Information and installation instructions can be found here:
http://wiki.laptop.org/go/Release_notes/13.2.0
Quick links for those who know which files need to be grabbed and save
to USB disks:
On Tue, May 28, 2013 at 9:40 PM, Basanta Shrestha
basanta.shres...@olenepal.org wrote:
Adding firefox did install firefox but gave following error while trying to
execute on XO:
$ firefox
Error: Platform version '13.0' is not compatible with
minVersion = 12.0
maxVersion
On Wed, May 22, 2013 at 10:36 PM, Basanta Shrestha
basanta.shres...@olenepal.org wrote:
Hi there,
I use fedora ARM to build OS for XO1.75. I have recently successfully built
OS12.1.0 using olpc-os-12.1.0-xo1.75.ini. Now I am in need of preparing a
build with firefox and flashplugin. Is it
On Mon, May 13, 2013 at 1:22 PM, Daniel Drake d...@laptop.org wrote:
May 23 - packages and activities frozen, first signed release
candidate published, only fixes to significant regressions taken
beyond this point.
We have now reached this point, the release candidate will be
published
Hi,
We're pleased to announce the first release candidate of our new
13.2.0 software release.
Information and installation instructions can be found here:
http://wiki.laptop.org/go/Release_notes/13.2.0
Quick links for those who know which files need to be grabbed and save
to USB disks:
On Thu, May 23, 2013 at 8:47 AM, Daniel Drake d...@laptop.org wrote:
One significant known issue is an XO-4 crash when it goes into deep
sleep with the screen off, which can also be triggered in other
similar sleep modes (#12657).
We've hopefully fixed this issue now, ready for the next build
On Mon, May 13, 2013 at 1:22 PM, Daniel Drake d...@laptop.org wrote:
May 23 - packages and activities frozen, first signed release
candidate published, only fixes to significant regressions taken
beyond this point.
To clarify/correct this point:
The build will actually be made a day before
Hi,
http://wiki.laptop.org/go/13.2.0
http://build.laptop.org/13.2.0/os6
TamTam updated to v67: fixes audio crackle on XO-4 (#12651)
JournalShare updated to v5
TurtleBlocks updated to v176
The XO-4 bluetooth driver is now loaded, it coexists happily with the
wireless driver (#12657)
XO-4
On Mon, May 13, 2013 at 10:19 AM, Daniel Drake d...@laptop.org wrote:
Hi,
http://wiki.laptop.org/go/13.2.0
http://build.laptop.org/13.2.0/os6
Sorry, made a silly mistake in a kernel patch, and XO-4 audio is not
working as a result.
To fix: yum update kernel
Daniel
Hi,
Development on 13.2.0 is going well, we are completing all of the
things we planned to work on. We have defined a schedule:
May 23 - packages and activities frozen, first signed release
candidate published, only fixes to significant regressions taken
beyond this point.
June 13 - final 13.2.0
On Fri, May 3, 2013 at 9:31 PM, Caryl Bigenho cbige...@hotmail.com wrote:
Hi Daniel,
Do they have to be completely reflashed? They cannot be connected to the
internet since they are in a shelter for battered women and it is a very
secure facility. That is why we are field testing Braddock
Hi,
http://wiki.laptop.org/go/13.2.0
http://build.laptop.org/13.2.0/os5
The XO-1.75 build is missing at the moment, it will be added shortly.
Changes are:
Help updated to v16
JournalShare updated to v4
Log updated to v34
MusicKeyboard updated to v7: no longer crackles on XO-4. TamTam still
On Fri, May 3, 2013 at 3:06 PM, Daniel Drake d...@laptop.org wrote:
Hi,
http://wiki.laptop.org/go/13.2.0
http://build.laptop.org/13.2.0/os5
The XO-1.75 build is missing at the moment, it will be added shortly.
The XO-1.75 build has now been published.
Daniel
On Fri, May 3, 2013 at 8:06 PM, Caryl Bigenho cbige...@hotmail.com wrote:
Hi...
Today I was helping some folks reflash the XO-1s they will be using in a
small deployment in Los Angeles. After installing 13.1.0 we found that a
scrolling display of code or something white on black... went
On Sun, Apr 28, 2013 at 2:08 PM, lio...@olpc-france.org wrote:
I’ve created my own image using OS Builder and customized the bootloader.
So I’ve got now an USB key that update the os image but I wonder if the key
could update also the firmware version.
I understand that the OS Image embed a
Hi,
We're pleased to announce the next release candidate of our new 13.1.0
software release.
Information and installation instructions can be found here:
http://wiki.laptop.org/go/Release_notes/13.1.0
Quick links for those who know which files need to be grabbed and save
to USB disks:
On Thu, Apr 18, 2013 at 3:41 PM, James Cameron qu...@laptop.org wrote:
Yes, SKU198 doesn't have DCON RAM.
#10916 has some additional history only half of XO-1.75 B1s have DCON
RAM -- those that have mechanical keyboards. and SKU-198 (which
don't have DCON RAM).
And as this is pre-production
Hi,
http://wiki.laptop.org/go/13.2.0
http://build.laptop.org/13.2.0/os4
Latest Sugar (0.98.7) and activity updates:
- Browse updated to v151.
- FotoToon updated to v14.
- JournalShare updated to v3.
- Jukebox updated to v30.
- Log updated to v33.
- Read updated to v108.
GTK3 fix for Sugar
On Wed, Mar 27, 2013 at 11:13 PM, Yioryos Asprobounitis
mavrot...@yahoo.com wrote:
On the XO-1 olpc-update failed on 2 consecutive attempts with different
manifest error each time.
In both case when was getting tight on disk space.
The update requires significant free space (more than 250MB)
On Fri, Apr 5, 2013 at 3:16 PM, George Hunt georgejh...@gmail.com wrote:
Hi Daniel,
I noticed that you were working on ds-backup recently. I was trying to get
XSCE running on fc18, and encountered the issue of fedora dropping
mod-python (see https://fedorahosted.org/rel-eng/ticket/5165).
On Wed, Apr 3, 2013 at 8:48 PM, John Watlington w...@laptop.org wrote:
This isn't a bug report, just an observation to keep anyone else from
spending time on this known condition (cjb's comment was of course!):
If you want to update a kernel on a 13.1.0/13.2.0 build, you must first
run
On Sun, Apr 7, 2013 at 3:19 PM, fors...@ozonline.com.au wrote:
updating build2 to build3
[olpc@xo-92-f0-ca ~]$ sudo olpc-update 13.2.0d_xo4-3
Downloading contents of build 13.2.0d_xo4-3.
Updating to version hash 41492c63f1bb3013b6b8582ac26057ad
Trying irsync_pristine update from
On Sun, Apr 7, 2013 at 3:10 AM, fors...@ozonline.com.au wrote:
Hi
olpc-update 13.2.0d_xo4-3
contents manifest failure at line453
Please share the full error message, and let us know which build you
are updating from.
Daniel
___
Devel mailing list
Hi,
http://wiki.laptop.org/go/13.2.0
http://build.laptop.org/13.2.0/os3
Another XO-4 bad touchscreen/mouse input interaction was fixed (#12640).
XO-4 cursor corruption after suspend should be fixed (#12556).
An occasional XO-4 8787 wireless failure after wake-on-LAN should be
fixed (#12573).
On Fri, Apr 5, 2013 at 3:36 PM, Mikus Grinbergs mi...@mikusj.com wrote:
If the system were to use several (static) self-assigned addresses, and
ifconfig eth0 down was the way to terminate the use of the current IP
address so that the next IP address could be activated - would it be
desirable
On Wed, Apr 3, 2013 at 8:48 PM, John Watlington w...@laptop.org wrote:
This isn't a bug report, just an observation to keep anyone else from
spending time on this known condition (cjb's comment was of course!):
If you want to update a kernel on a 13.1.0/13.2.0 build, you must first
run
On Thu, Mar 28, 2013 at 1:37 AM, Hal Murray hmur...@megapathdsl.net wrote:
Would somebody with an XO-1 please try switching to Gnome. Mine went into a
loop trying to start X.
I reproduced this too. Filed http://dev.laptop.org/ticket/12643
___
Devel
On Mon, Apr 1, 2013 at 10:51 AM, Juan Cubillo jcubi...@fundacionqt.org wrote:
Hello,
I'm creating xo1.75 OS images on a 1.75 XO since that's the only ARM
hardware I have around. In order to sign the images I need to compile
bios-crypto following the instructions from the wiki:
On Mon, Apr 1, 2013 at 11:12 AM, Juan Cubillo jcubi...@fundacionqt.org wrote:
Yes, I cloned the git repo, changed directory and issued the make command
but I get the error described. I'm running this on the latest stable image
for the xo1.75.
From your reply I assume that this error is not
On Sun, Mar 31, 2013 at 1:26 AM, Lionel Laské lio...@olpc-france.org wrote:
BTW I don't understand where this version come from:
- Latest Browse version mentioned on Sugar App store is 129 [1],
Click View older versions to view newer versions
On Sun, Mar 31, 2013 at 2:26 PM, lio...@olpc-france.org wrote:
But: why the latest version is not... the latest version?
The activities.sugarlabs.org admin has decided which version of Sugar
is the most common (he picked an old one, maybe 0.94?), and the
website offers up activities compatible
On Wed, Mar 27, 2013 at 4:03 PM, Christoph Derndorfer
christoph.derndor...@gmail.com wrote:
Hey everyone,
after seeing the 13.2.0 build 2 discussions this morning I'm a bit confused.
Has 13.1.0 been declared stable and released yet? For all XO models?
The current status is noted in the 13.2.0
Hi,
http://build.laptop.org/13.2.0/os2
Sugar updated to 0.98.6. Welcome screen is back (#12628) and now
unlocks the screen at the correct moment (#11995).
Paint updated to v57.
The Journal Share activity was added. This is a prototype/experiment.
We want to provide a non-intrusive initial
On Mon, Mar 25, 2013 at 3:16 AM, lio...@olpc-france.org wrote:
Great ! I did'nt know that default language could be change directly in the
firmware.
I guess it depends of the SKU value. Could I set French with an English
keyboard ?
Yes. LO is for system language, KL is for keyboard language.
Thanks for testing.
On Sat, Mar 23, 2013 at 2:43 AM, Tom Parker t...@carrott.org wrote:
No sound in TamTam or Speak on 3 out 5 XO-1.75s. Speak hung when saying a
sentence, scratch failed to start with an error in it’s log about missing
sound driver. Record hangs when you take a photo on those
On Sun, Mar 24, 2013 at 4:34 PM, Paul Fox p...@laptop.org wrote:
i think the point john (gilmore) was making is that it's a bad
precedent that simply because a) systemd offers a second-rate API for
scheduling events, and b) we only have a couple of uses for an event
scheduler, that we should
Hi,
Found some time to implement something that has been desired for a
while: now when you install a kernel RPM on the XO, it will
additionally auto-install to the boot partition, so now you can just
install a new kernel RPM with rpm/yum and reboot and expect it to be
used, no additional steps
Hi,
As a simple step in reducing base system footprint a little, I'm
thinking of removing cron in 13.2.0.
The 2 current users of cron (ds-backup and olpc-update-query) will be
moved to systemd timer units which have equivalent functionality.
Any objections?
Daniel
On Mon, Mar 18, 2013 at 8:26 AM, Daniel Drake d...@laptop.org wrote:
2. Do python-level profiling of sugar to figure out why we are also
spending a lot of time executing pure Python code.
Its easy to hook up the python profiler:
Change the last line of /usr/bin/sugar to
exec python -m
On Mon, Mar 18, 2013 at 7:37 PM, Sameer Verma sve...@sfsu.edu wrote:
We have a bunch of XO 1.75 going to Madagascar. These have build
13.1.0 (candidate 35). This ogv file [1] works well on a XO-1 but does
not play via jukebox. The ogv file plays well in Browse (trouble with
going fullscreen).
On Tue, Mar 19, 2013 at 7:27 PM, Sameer Verma sve...@sfsu.edu wrote:
Looking at codec info via VLC tells me that the resolution is 320x180
but Display Resolution is 320x192
I don't know enough about this to know the difference. How should I
got about encoding the MP4 differently?
Maybe try:
On Mon, Mar 18, 2013 at 7:17 PM, Tim Moody timmo...@sympatico.ca wrote:
Over the years there have been a number of expressions of interest in
puppet. Are there any modules out there for actual XS services?
I know about http://dev.laptop.org/git/users/martin/puppet-example/tree/,
which has
Hi,
I spent an hour comparing and investigating Sugar startup time on XO-1
for 12.1.0 vs 13.2.0 build 1.
To measure this, I modified sugar-session to add a glib idle_add call
to gtk.main_quit(), after the other bunch of idle_add calls that are
made. Then startup can be timed by stopping X and
On Mon, Mar 18, 2013 at 8:26 AM, Daniel Drake d...@laptop.org wrote:
I then re-ran the test through perf on 13.2.0 build 1.
8.66% of this time is spent in g_typelib_get_dir_entry
(libgobject-introspection).
6.79% is spent in pure Python (EvalFrameEx)
5.8% of the time is spent in libc.
Oops
1 - 100 of 1249 matches
Mail list logo
