red wirelessly).
But for now I want to get the devices in the hard of the users and let
them tell me what they need.
--
Dr. Guylhem Aznar, MD PhD
Unité d'Analyse Médico-Économique
Service de Santé Publique et d'Économie de la Santé
Pôle SPSSR
CHU de Fort de France
BP 632
97261 Fort De F
t of their team, (I will do my best to
make pictures - I'm not in PR :-) during which I'll offer to adapt for
free their existing software, if they can also put some of the XO
loaded with drugs prescriptions, interactions, etc. to primary care
doctors.
Then finally the XO will be at their ne
sum up what I've read in this thread, what should be done in any case :
a) discarding jffs2
b) discarding initrd
c) storing the kernel uncompressed in an uncompressed small partition
And yes, this seems trivial to do - the low hanging fruit.
Personally, I will do my best to do that and improve b
ome moblin-like preinitialisation for
the x server, etc.
--
Dr. Guylhem Aznar, MD PhD
Unité d'Analyse Médico-Économique
Service de Santé Publique et d'Économie de la Santé
Pôle SPSSR
CHU de Fort de France
BP 632
97261 Fort De France Cedex
Martinique, France
Tel : 05 96 55 23 47
Fax : 05 96 7
command
prompt)
I'm open to any additional suggestions. (I'll consider the sysvinit
optimisations later)
Thanks
--
Dr. Guylhem Aznar, MD PhD
Unité d'Analyse Médico-Économique
Service de Santé Publique et d'Économie de la Santé
Pôl
explained following olpc-image-builder ? Everything is explained but
that.
Thanks
--
Dr. Guylhem Aznar, MD PhD
Unité d'Analyse Médico-Économique
Service de Santé Publique et d'Économie de la Santé
Pôle SPSSR
CHU de Fort de France
BP 632
9726
that could use UBIFS? Say coreboot , or even a bios with grub,
anything will do!
If there's no security, if there's little functionality, not field
upgrades etc, it will just be fine as long as it can boot any quicker.
I just can't keep the boot delays currently experienced with jf
plug. I would like to avoid soldering wires to a VGA plug.
Soldering the plug should take less than 5 minutes once I get the
correct type from digikey/mouser
> If you are still interested, you could start with the following
> references (although I didn't see any part numbers there).
Alread
Hello
"A" boards had CN18 to select the output between VGA and LCD.
It is no longer presnt on the boards. How can it be implemented?
(strip wire, software, ... ?)
For the VGA plug, I'd also be interested in a P/N to get one from
mouser, mousekey etc.
Thanks
--
Dr. Guylhem Aznar
to children who first need to learn how to type.
This redesign may not be desirable however, because it would introduce
a serious difference in the OLPC user interfaces - yet I think it
should be mentionned.
--
Dr. Guylhem Aznar, MD PhD
Unité d'Analyse Médico-Économique
Service de Santé Publique
need to do then to sign my images?
Any pointer is appreciated.
I'll add my experience to the firmware wiki page.
--
Dr. Guylhem Aznar, MD PhD
Unité d'Analyse Médico-Économique
Service de Santé Publique et d'Économie de la Santé
Pôle SPSSR
CHU de Fort de France
BP 632
972
by_hacking on the wiki,
without any reply)
Do I need specific tools ?
I have the developper key for the machine I would like to experiment on.
Thanks in advance for any information
--
Dr. Guylhem Aznar, MD PhD
Unité d'Analyse Médico-Économique
Service de Santé Publique et d'Économie
A similar question about dcon.
>From dmesg, it looks just fine.
$ dmesg|grep dcon
[ 26.481778] olpc-dcon: No DCON found on SMBus
[ 30.651493] olpc-dcon: Discovered DCON version 2
[ 30.708411] PM: Adding info for platform:dcon
But apparently dcon sleep, output and freeze also refuse to chan
Hello
I am wondering if there is currently any possbility to completely turn
off the whole video subsystem, while leaving the cpu running? [and is
it also possible to "reclaim" the video RAM for the system BTW ?]
That's for a screenless OLPC I'm experimenting with, and for which
there's no need t
Hello
It works
[ 4300.811798] drivers/input/serio/i8042.c: 69 <- i8042 (interrupt, 0,
1) [427524]
[ 4300.812015] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [427524]
[ 4300.937465] drivers/input/serio/i8042.c: fc <- i8042 (interrupt, 0,
1) [427537]
[ 4301.011188] drivers/input/serio/i8042
Hello
After my (mostly) successfull B4 to C2 motherboard surgery, I am left
with a working B4 motherboard that I would like to use for various
tests purposes, including kernel stability tests and perfs
optimisation.
It is a bare motherboard- no display, no keyboard, no battery. Just a
power adapt
Hello
Whenever a jack is plugged in, the audio is routed to the jack instead
of the main speakers. It may not always be desirable (ex: wakeup
clock)
Did try to tweak alsa settings, but I couldn't change that.
Is there a way to override it?
Thanks
Guylhem
OLE Nepal, http://www.olenepal.org
>>
>> ___
>> Devel mailing list
>> Devel@lists.laptop.org
>> http://lists.laptop.org/listinfo/devel
>
>
> --
>
> ___
> Devel
Hello
A suggestion for similar problems, which I experienced in the past for
other hardware.
The /var tree is mostly used for logs and caches - stuff that could be
discarded at reboot. And usually, there's a lof ot them (see with du
-ksh)
There are some important subdirs that however should be k
Hello
I wouldn't necessarily want another machine - just a motherboard from
say a machine that has been returned with a broken screen, or
whatever, would be fine
A fully working XO would be best used for someone who hasn't one yet IMHO.
Anyway, I'll drop a message
Thanks
Guylhem
__
Hello
I was wondering if I could return my motherboard to get a current
"mass-production" one without the documented hardware bugs : I fear I
may not be able to perform all the fixes required
(http://wiki.laptop.org/go/B4_Suspend_ECR), while I would need suspend
support.
I guess the current mothe
Hello
Today I had a little problem with my OLPC B4.
Long story short - windows XP support announcement, although
controversial, was good news for my project acceptance (and more
importantly, financing)- which really did surprise me, but whatever.
So I wanted to resume my development efforts, and
Hello
Some time ago I did post a mail about sign language work.
I just wanted to let interested parties know that I have finished
redacting my thesis, and that I am trying to have someone work on an
implementation for at least proper fingerspelling support.
If you have some free time, know how t
On 10/2/07, Jordan Crouse <[EMAIL PROTECTED]> wrote:
> On 02/10/07 00:39 -0400, Albert Cahalan wrote:
> > Activities can set an X property to override this as well.
> > Switching between activities switches the mode bits as needed.
> > All bit patterns should be available.
>
> The source code is fr
Hello,
Been there, done that, for different devices - mostly PDAs.
First you *must* check the specs : optimism won't get you far if the
pins have different fonctions (like they have been swapped) or require
some minor adaptations. Get the reference sheets for each device, read
them and understand
Hello
On 8/20/07, Jordan Crouse <[EMAIL PROTECTED]> wrote:
> > It'd be great if this could be included. Better yet would be
> > to allow specifying the raw register value, of course with
> > an -EINVAL if bits unrelated to swizzle and backlight are set.
>
> Again - can I ask why? The sysfs/ inter
Hello
I am trying to figure out more about how power management work on the
OLPC. It's quite different from what I am used (acpi, etc) and the
documentation/scripts doesn't seem up to date
For example, I saw references to respeclaration in the xinitrc while
it's supposed to be unused and replaced
Hello,
On 8/18/07, Jordan Crouse <[EMAIL PROTECTED]> wrote:
> We didn't enable this ability in the sysfs/ interface. I have never
> been too clear on what the actual practical uses are for something like
> this, so the control never got added.
> In a pinch, you can use the i2c-tools utilities to
Hello,
On 8/18/07, Yuan Chao <[EMAIL PROTECTED]> wrote:
> I've tried one SD card made by a local company. It's a bit thinker
> than the genuine panasonic one. So this results in that it can only be
> ejected out a bit and I have to use my finger nail to grab it out.
> (probably same situation as y
Hello,
On 8/17/07, Don Hopkins <[EMAIL PROTECTED]> wrote:
> I think just writing the code is a
> good antidote to engaging in the arguments in the first place. If the
> functionality is straightforward and easy to implement then just do it
> rather than argue about it.
Hence my suggestion in the
Hello,
As explained before, I started playing with the DCON (displaying test
images in X, changing various parameters, etc) and other stuff.
The results are interesting. For example, a black and white mode will
backlight on, even if it reduces the percieved resolution, could be
usefull to read at
Hello,
On 8/17/07, Walter Bender <[EMAIL PROTECTED]> wrote:
> Lets please be careful not to over-engineer. While Mike makes good
> points, we have this wonderful human social network we can depend upon
> as well. E.g., If I am downloading something from your machine, I can
> ask you to hold on a s
On 8/11/07, Jameson Chema Quinn <[EMAIL PROTECTED]> wrote:
> I've archived this discussion on robotics/LED output, with some points of my
> own, on the wiki at
> http://wiki.laptop.org/go/Electrical_output.
Thanks a lot for the summary on the wiki.
A quick suggestion : if there is a serial port i
Hello
On 8/11/07, Yuan Chao <[EMAIL PROTECTED]> wrote:
> On 8/11/07, Guylhem Aznar <[EMAIL PROTECTED]> wrote:
>
> > Today I just received my XO after having some problems with DHL and
> > DDP. I'm in France, but I had the same problem Xavi mentionned on
&
Hello
Today I just received my XO after having some problems with DHL and
DDP. I'm in France, but I had the same problem Xavi mentionned on
http://wiki.laptop.org/go/User:Xavi/My_XO : basically, they don't
understand what DDP means and insist on making recipients pay the
duties. Looks like double
Hello
I have many many questions but starting with them would be rude - so I
will first introduce myself :-)
My name is Guylhem Aznar, I am a medical resident doing a PhD in
computer science, working on computer support for a written form of
sign languages. (for a good introduction on the topic
36 matches
Mail list logo