Hi Kees,
I assume there are more violations than the ones in the SPI drivers... But of
course every step forward is great!
Testing can be done by the community. We have plans to create a distributed
test system with actual hardware attached, but sadly that has not become
reality yet.
Compilat
Hi,
gebart is Joakim ;)
Cheers,
Ludwig
Am 5. Juli 2016 21:11:44 MESZ, schrieb Kees Bakker :
>Thank you for the info. It seems that gebart noticed it too :-) There
>is
>a fresh reply in #4780.
>
>
>On 04-07-16 19:49, Joakim Nohlgård wrote:
>> Hi Kees,
>> Like Ludwig wrote, there are some places
Jose, is the following PR yours?
https://github.com/RIOT-OS/RIOT/pull/5552
What's the status of the PR, are you still working on it?
2016-06-16 17:30 GMT+02:00 Oleg Hahm :
> Hi José!
>
> On Thu, Jun 16, 2016 at 05:18:32PM +0200, Jose Alamos wrote:
>> I'm porting the OpenThread stack to RIOT. I hav
I can confirm that it works properly.
SPI is used to communicate with the transceiver on samr21-xpro and
communication works so SPI works, I used SPI1 also with no problem
2016-07-05 21:50 GMT+02:00 Kees Bakker :
> Hey,
>
> Can someone confirm that SPI is working on the samr21-xpro board?
>
> I'm
Hi Alessandro,
have you assigned a global unicast address to the 6LoWPAN interface on
the Raspberry Pi and started the radvd demon normally it should (but
maybe Alex Aring can confirm that) it should than start to provide the
prefix in the LoWPAN via stateless address auto-configuration. Ideally
th
Hey,
Can someone confirm that SPI is working on the samr21-xpro board?
I'm trying to make SPI work on my Autonomo board, but I haven't
succeeded yet. FYI, I'm also reorganizing the code so there are a lot
of parameters that can be of influence. I can't use the current code
because the pins and t
Hi Ludwig,
Well, it will be a challenge to smootly correct this.
There are 16 CPU's that use spi_transfer_byte(s) and 6 drivers.
I won't mind creating a PR, but of course I can only test it by building
examples for all boards that support SPI. And look at compile errors. Or are
there other proce
Thank you for the info. It seems that gebart noticed it too :-) There is
a fresh reply in #4780.
On 04-07-16 19:49, Joakim Nohlgård wrote:
Hi Kees,
Like Ludwig wrote, there are some places which haven't followed the
coding conventions because the CC weren't as clear before as they are
now wi
Hi all,
i'm wondering how i could define an auto-configuration for the 802.15.4
interface (on boot) for my "microcoap_server" example.
At now i'm using this configuration (set up by shell)
// Channel
ifconfig 6 set channel 12
// Global IPv6
ifconfig 6 add my_address
// Route
fibroute 6 add :: vi