I reset the router, which took a long time to restart wifi, and have
been streaming since with no interruptions. Seems to have done the
trick.
R.
LMS on a dedicated server (FitPC3)
Transporter (Ethernet) - main listening, Onkyo receiver, Paradigm
speakers
Touch (WiFi) - home theater 5.1,
RonM wrote:
> I'll do that, although wifi has been working fine with much higher
> demand functions like streaming movies. Signal strength indicator was on
> my phone, which tends to report strength reliably. No probs with
> ethernet connections. Will report back on the results of the reset.
>
d6jg wrote:
> Its indicating a networking issue - specifically a packet loss that
> requires the connection to be reset by the server. (LMS).
> As you said its a Radio on WiFi Id look at the WiFi first. The signal
> strength indicator is not really any guide.
> Start by rebooting the router.
Its indicating a networking issue - specifically a packet loss that
requires the connection to be reset by the server. (LMS).
As you said its a Radio on WiFi Id look at the WiFi first. The signal
strength indicator is not really any guide.
Start by rebooting the router.
VB2.4[/B] STORAGE
I'm listening to music on my Radio, wifi connected to my dedicated music
server. I'm getting repeated pauses when the music resumes after a bit,
and sometimes loss of the current track with the message "connection
reset by remote server" -- and then moves on to the next track. Not sure
why this
karlek wrote:
> When you hold the Left Arrow key, you get to the Settings.
> There under
> #2 Current Settings you'll find
> ##16 Factory Reset
>
> I think, this should trigger the desired reset (but I didn't try ;) )
Thanks! I was looking under "Settings" after normal boot-up, not in the
When you hold the Left Arrow key, you get to the Settings.
There under
#2 Current Settings you'll find
##16 Factory Reset
I think, this should trigger the desired reset (but I didn't try ;) )
karlek's Profile:
I'd like to sell my old SB3 (classic), but the remote took some damage
from a leaking battery, so the upper buttons (Sleep, Power, Skip/Pause,
Add) are not working anymore (not sure if that could be fixed using
conducting lacquer?). The arrow keys and everything below are working
fine, so I was
hi,
my son got a squeezebox for his birthday when he set it up he some how
managed to
get a dutch menu how can we get menu back to english? is their a simple
way of doing this.
thanks in advance
skelly
--
patrick
Like they say. once you go Dutch.. ;)
Just Factory Reset the player and it will ask which language as part of
setup. Without knowing which player model is in question I cannot offer
the details to do so.
--
toby10
If it's a Touch or Radio:
Instellingen (Home menu) - Geavanceeerd - Taal - English
--
castalla
1 Touch - Muse M50 EX TPA3123 T-Amp Mini - Acoustics Q10 speakers - 2
duff ears - purfek!
1 Logitech Radio + remote - purfek!
Hi, I forgot my bugzilla password. When I enter my e-mail address to
reset password I never get the e-mail with the link to reset it. The
message is not in my spam either. Anyone else has the same problem?
--
treble
This is an issue that our technical support team can assist you with.
I recommend sending an email to support for additional assistance with
this matter.
Please follow the link below the click on the Email Support link.
Please be sure to select the correct product in the product selection
drop
There seems to be a general problem with mails from bugzilla. I tried to
create an account twice, but never received the confirmation mail.
And yes, I did look into my Junk folder, and even into the Exim logs on
my mail server. :)
--
usch
There seems to be a general problem with mails from bugzilla. I tried to
create an account twice, but never received the confirmation mail.
Yes, bugzilla hasn't been sending out mails for several days (@#!). Still
waiting for the fix...
--
Michael
How often do you have to unplug your Squeezebox to reboot it?
How often do you have to reset the audio chip?
How often do you have to do a factory reset on your unit?
I find that to keep the Squeezebox working I need to reboot it after a
day or so by unplugging and replugging the power plug.
Hi,
In article [EMAIL PROTECTED],
slwiser[EMAIL PROTECTED] wrote:
How often do you have to unplug your Squeezebox to reboot it?
Almost never.
How often do you have to reset the audio chip?
Can't remember ever doing it.
How often do you have to do a factory reset on your unit?
That doesn't sound right, I have I think 6 units running currently and
with latest firmwares and SC7 they're basically 100% stable. I've never
had to do a hold 1 reset, although a while ago (couple of years) there
was a period where factory resets were needed pretty frequently.
One of the key
Whenever my cable internet goes down I have to unplug and replug my
router. Whenever I do that I then have to do the same with my SB3.
--
Rick B.
Rick B.'s Profile: http://forums.slimdevices.com/member.php?userid=8973
Fairly often I (and some other people) have to press and hold the power
button to get a connection after the computer wakes from sleep.
But this isn't an actual reset.
--
danco
danco's Profile:
Hmm,I had to reset the wireless router,as my laptop lost signal to,now
the SB finds the router automatic.Thanks for answers!
--
Ryssen
QNAP TS-109Pro, Firmware v1.1.5T ,IBM HDS7210KLA330
Ryssen's Profile:
seanadams;263767 Wrote:
Actually, holding add does a reset of the settings. Pressing 1
causes the system's programmable logic circuitry for the audio to be
re-flashed.
Thanks for pointing this out.
So far the magic remote control buttons I know about are
- press [1] at power on - reloads
Mark Lanctot;263765 Wrote:
However you should be able to change your IP and it should find your
server providing a firewall isn't blocking it, so these problems might
come back.
They did come back..With a LAN cable it got conected as it should,
but with wireless I cant change from automatic
bobkoure;264174 Wrote:
- press [1] at power on - reloads lilinux and firmware (actually does a
re-flash?)
No, it doesn't reload firmware. The Xilinx chip contains the codecs.
If you experience audio glitches, this is the one to use.
- press and hold [bright] - load firmware from the
Ryssen;264175 Wrote:
but with wireless I cant change from automatic find the IP to where i
can enter it myself,under curent settings I cant do that,
It's not in current settings, you have to get back into network setup.
Either press and hold left for 5 seconds or remove and replace power.
I want to reset SB to fatory settings.It does not find the server
automatic,and I cant change the IP.So I want to start clean.
--
Ryssen
QNAP TS-109Pro, Firmware v1.1.5T ,IBM HDS7210KLA330
Ryssen's Profile:
Unplug power, press and hold 1 on the remote, replug power while
holding 1. This is a factory reset.
However you should be able to change your IP and it should find your
server providing a firewall isn't blocking it, so these problems might
come back.
--
Mark Lanctot
Ben Klass: I won't even
Actually, holding add does a reset of the settings. Pressing 1
causes the system's programmable logic circuitry for the audio to be
re-flashed.
--
seanadams
seanadams's Profile:
Michael Herger;178309 Wrote:
You can set the refresh rate to some huge amount (10 minutes should be
fine). It will then only update every song once or twice.
This doesn't seem to work for me - I still get lots of refreshes
happening repeatedly. Any other ideas?
M
--
maxst
Michael Herger;178142 Wrote:
Close that tab?
Funny, but not that helpful. Being able to check the songs being
played is useful, I'd just like to refresh it myself when I need to, or
slow down the refreshes.
--
maxst
played is useful, I'd just like to refresh it myself when I need to, or
slow down the refreshes.
You can set the refresh rate to some huge amount (10 minutes should be
fine). It will then only update every song once or twice.
--
Michael
I'll keep a tab open pointing at my slimserver URL, and after a while
it'll occasionally go wild repeatedly refreshing itself almost
immediately. I go to set the refresh interval to something more sane,
and it tells me that occasionally it will automatically reset it to
something smaller to be
Even more to the point, can I turn off auto-refresh altogether?
Close that tab?
--
Michael
-
http://www.herger.net/SlimCD - your SlimServer on a CD
http://www.herger.net/slim - AlbumReview, Biography, MusicInfoSCR
I'm using a windows based system that is networked to other windows
systems. Is there a way to use a command line script to reset the
slimserver from a client PC?
shutdown.exe is part of Windows XP - similar tools can be found on the net
for older versions.
--
Michael
I'm using a windows based system that is networked to other windows
systems. Is there a way to use a command line script to reset the
slimserver from a client PC?
The reason I asked is intermittingly while using softsqueeze on a
client PC the program will be come sluggish. However when I
35 matches
Mail list logo
