I've had my Slimserver 2 for about 2 weeks now and I think its a
fantastic little unit, however it does seem to have one issue.
I have an Xbox hanging off the unit and I have the SlimServer set up to
work as a wireless bridge. It all works fine, I can use Live on the XBOX
without any problems.
I think you need some in-line attenuators. These devices
are basically tubes with a phone socket on one end, a
plug on the other and an attenuator in the middle. They're
designed for exactly what you're trying to do.
You can get then from:
My slimserver (6.1 or 6.02 both) on winxp (with and without SP2) on a
shuttle P4 is crashing quite constantly with my slimp3 saying
connecting...is this the right ip... somthing like that. I go to the
web interface and select the various debug options and save. Then it
crashes, I go to the web
The Rhapsody software itself can stream via upnp to a upnp enabled
device that supports protected wma. No need for slimserver.
The Windows Media Connect server software would stream the other
subscription services to the Squeezebox. No need for Slimserver.
That's the only technical reason
[..]
crashes, I go to the web interface, get page not found, hit refresh, go
to the debug page -- no log to be found and the checks are gone.
The log is stored in a file called slimserver.log. I don't know exactly
where it is on windows systems, but guess it's where you installed
One more possibility... If you run slimserver from the command line
(slim.exe) the log output will be given in the console where you can read
it.
--
Michael
---
Help translate SlimServer by using the
StringEditor Plugin
I'll try the command line - cause I searched for a log file and found
none. Any suggestions as to the exact options?
c:/slimserver/server/slim.exe --d_plugins --d_stdio (others?)
log.txt
thanks
--
bouton
___
Discuss mailing list
I'll try the command line - cause I searched for a log file and found
none. Any suggestions as to the exact options?
Depends on what information you need... What do you want?
--
Michael
---
Help translate SlimServer by using the
:) I want to find out why slimserver is crashing when it is a dedicated
server. slimserver installed as given - no extras.
mherger Wrote:
I'll try the command line - cause I searched for a log file and found
none. Any suggestions as to the exact options?
Depends on what information you
I've just done a clean install of the Slimserver 5/24/2005 nightly and
the iTunes plugin will not enable. This is on a test workstation
not my main server. Thought I'd do it here first. iTunes
version 4.8.0.31. Any ideas on how to get it going? Thanks-- Do meddle in the affairs of Dragons,for you
Can you give any more information?
Like your OS etc. and a log file showing any
errors?
and this is the 'iTunes' library scanner - not the 'iTunes
update' plugin?
(I have not had any problems with iTunes
4.8)
James
NOTICE: If received in error, please destroy and notify sender.
OS is Windows XP SP2 latest patches.
Here is the logfile
2005-05-24 07:58:21.4791 Your data source needs to be configured. Please open your web browser,2005-05-24 07:58:21.4792 go to the following URL, and click on the Server Settings link.2005-05-24 07:58:
21.4793 The URL to access SlimServer is
:) I want to find out why slimserver is crashing when it is a dedicated
server. slimserver installed as given - no extras.
If the crashes aren't related to some of your actions just run it without
any parameter. This might already give a hint in what direction to look
further.
--
Michael
I did some searches of the archive and couldn't find anyone
mentioning adding AOL instant message (AIM) support to
SlimServer/Squeezebox. I would like the ability to send an instant
message to my wife at home. The display in my living room would be
perfect for this. I could imagine that
I am unable to get the iTunes Library option to show up so I can set
the path to the iTunes library.
Just a quick check, but have you enabled the iTunes plugin? I seem to
remember that if the plugin has been disabled then the iTunes section
won't appear in the server settings.
Phil.
It won't enable. I check the option box and as soon as the browser refershes the check is gone.On 5/24/05, Philip Downer
[EMAIL PROTECTED] wrote: I am unable to get the iTunes Library option to show up so I can set
the path to the iTunes library.Just a quick check, but have you enabled the iTunes
Quoting Roy Owen [EMAIL PROTECTED]:
It won't enable. I check the option box and as soon as the browser refershes
the check is gone.
the itunes section should be there no matter what. if not, then the code that
controls that was broken during the reworking a few weeks ago.
perhaps michael
ah, yes, it appears I was ignored when I mentioned that the itunes settings tab
needs to always be on. disabling the plugin, removes the tab. thus, if the
plugin fails to init (ie when the xml file isn't found automatically) then the
plugin is disabled and the itunes settings tab (and any way
Thanks kdf, I look forward with baited breath. BTW, I've
also put in a feature request at Apple to be able to specify the
location of the library file in iTunes as well.
On 5/24/05, kdf [EMAIL PROTECTED] wrote:
ah, yes, it appears I was ignored when I mentioned that the itunes settings tabneeds
Quoting Roy Owen [EMAIL PROTECTED]:
Thanks kdf, I look forward with baited breath. BTW, I've also put in a
feature request at Apple to be able to specify the location of the library
file in iTunes as well.
yeah, they had an option for that at least sometime along the way, but they
ignored
Quoting Roy Owen [EMAIL PROTECTED]:
Thanks kdf, I look forward with baited breath. BTW, I've also put in a
feature request at Apple to be able to specify the location of the library
file in iTunes as well.
yeah, they had an option for that at least sometime along the way, but they
ignored
Shouldn't I be able to just open the prefs file and remove iTunes from the disabled list?On 5/24/05, kdf
[EMAIL PROTECTED] wrote:Quoting Roy Owen
[EMAIL PROTECTED]: Thanks kdf, I look forward with baited breath. BTW, I've also put in a feature request at Apple to be able to specify the location
Alan Walls Wrote:
I have just bought my first SB2, it's wonderful!!
Its setup in my bedroom using the SB2 as the preamp for a Rotel power
amp.
The problem is that I can't set the volume low enough.
Any suggestions?
Alan,
The best solution would be either the attenuators suggested by
Quoting Roy Owen [EMAIL PROTECTED]:
Shouldn't I be able to just open the prefs file and remove iTunes from the
disabled list?
you can do that too.
___
Discuss mailing list
Discuss@lists.slimdevices.com
Okay, thanks.On 5/24/05, kdf [EMAIL PROTECTED] wrote:
Quoting Roy Owen [EMAIL PROTECTED]: Shouldn't I be able to just open the prefs file and remove iTunes from the disabled list?you can do that too.
___Discuss mailing listDiscuss@lists.slimdevices.com
Max,
I'm currently using a WRT54G router with a DLINK ADSL modem. The router
has an alternative firmware (DD-WRT at the moment). The two box soln has
allowed me to upgrade from router from a DLINK 614 (B only) whilst
keeping the modem - I now use the 614 as a B only access point for my
SB1s, and
Hi,
In article [EMAIL PROTECTED],
Richard Titmuss[EMAIL PROTECTED] wrote:
The Primary Sound Driver is only available when you are using Java 1.5.
It will appear under the Audio Mixer setting.
Ok, thanks.
On one of my PCs, I've got the 'Silent SoftSqueeze' problem. Is there any
disabling the plugin, removes the tab. thus, if the
Should not. iTunes was adding the setting itself, independantly of the
disabled state, when enabled() was called. But though addGroups() is
called, the settings group isn't added. I'll have a look at it.
commenting out line 233 fixes
Quoting Michael Herger [EMAIL PROTECTED]:
disabling the plugin, removes the tab. thus, if the
Should not. iTunes was adding the setting itself, independantly of the
disabled state, when enabled() was called. But though addGroups() is
called, the settings group isn't added. I'll have a look
I have sync problems when playing a local stream from DABBAR, but not
with stored music or internet radio (inc Alien BBC). I am running
Slimserver 6.1 (nightly of 18.5) on Windows 2000 with 1 x SB1
(wireless), 1 x SBG (wireless), 2 x SB2 (wired), 1 x SB2 (wireless).
Synch quality is very good
iTunes.pm
and that doesn't actually work anyway. line 232 AND 233 would need to be
removed, which then means the use/not use settings are also present. it
looks as though delGroup is removing too much. But I gave up trying to
keep track.
This would imho still be the best choice. Most users
Haven't looked into the details yet, but perhaps a trillian plugin could
then send a command line message to the squeezebox ?
http://www.ceruleanstudios.com/
--
Bruce Hartley
___
Discuss mailing list
Discuss@lists.slimdevices.com
Hi,
I just moved my library from an EMAC to a Mac mini and am having way to
much fun I have tried 6.0.2 and 6.0.1 and have had multiple problems
from the CPU spinning at about 90%, to not all tunes/albums/artists
showing up. I know that 6.0.1 - trunk worked on my emac, so i want to
try it on
Hi
I am having some trouble with some folders not showing.
I recently added a folder called 'Jazz' for example. Within that there
are artist and album folders. The 'Jazz' folder refuses to show
regardless of how many rescans.
I also have some folders that remain, though they were deleted weeks
Orb Wrote:
Hi
I am having some trouble with some folders not showing.
I recently added a folder called 'Jazz' for example. Within that there
are artist and album folders. The 'Jazz' folder refuses to show
regardless of how many rescans.
I also have some folders that remain, though they
Is there a way to have anyone who plays my stream (for example: using
Winamp) to stream whatever playlist is currently streaming? It seems
that it is always necessary to first connect into the web interface,
create a playlist and start playing it, then play the stream.mp3
through winamp. I'd
Hi Flugle,
I believe that this bug is fixed in the latest 6.1 pre-release
nightly version.
Try downloading that http://www.slimdevices.com/nightly.html and
let us know if your problem is fixed.
-dean
___
Discuss mailing list
it shoudl be fairly easy as long as the IM clients can send http commands.
slimserver allows easy display commands from http or by CLI over any telnet
connection. see docs in help section.
-kdf
___
Discuss mailing list
Discuss@lists.slimdevices.com
Quoting Michael Herger [EMAIL PROTECTED]:
iTunes.pm
and that doesn't actually work anyway. line 232 AND 233 would need to be
removed, which then means the use/not use settings are also present. it
looks as though delGroup is removing too much. But I gave up trying to
keep track.
This
Quoting Michael Herger [EMAIL PROTECTED]:
iTunes.pm
and that doesn't actually work anyway. line 232 AND 233 would need to be
removed, which then means the use/not use settings are also present. it
looks as though delGroup is removing too much. But I gave up trying to
keep track.
This
I love the Analog VU screensaver and have it set to turn on after 30
seconds. However, I like to know what each new track is called, so
constantly have to press Now Playing when a new track starts. There's
not a setting that I've missed that would do this for me is there? I
basically want the
Quoting jwgraves [EMAIL PROTECTED]:
Is there a way to have anyone who plays my stream (for example: using
Winamp) to stream whatever playlist is currently streaming? It seems
that it is always necessary to first connect into the web interface,
create a playlist and start playing it, then
That's a great suggestion. Can you file an enhancement request on
http://bugs.slimdevices.com ?
Thanks!
On May 24, 2005, at 1:12 PM, max.spicer wrote:
I love the Analog VU screensaver and have it set to turn on after 30
seconds. However, I like to know what each new track is called, so
The visualisers have a parameter for 'showtext' so that could just be a simple
change of a 0 to 1. There isn't any simple player or web ui for this, however.
-kdf
___
Discuss mailing list
Discuss@lists.slimdevices.com
What i'm seeing is a collection of things that have been talked about on
the list already. I'll try each one and see what happens. What i do know
1)i download the current 6.0.2 that is available from the download page
the CPU spins at 90% for about a minute maybe longer, goes idle for 10
secs
I am having the same issue and am looking for help. I am trying to sync
a squeezebox1 with softsqueeze. I followed the website and loaded the
latest java as well as the java mp3 plugin. I can get it close but not
close enough for it to consider it being sync'd. There is usually
somewhere
Thanks
Downloaded 6.0.2, wiped the cache and all is well again :)
--
Orb
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
Philip Meyer wrote:
...
It seems like every wireless router manufacturer has problems.
...
They do. I've had about a 50% success rate across Linksys, NetGear, and
DLink. I probably have worse luck than usual, but quality is not high on
many manufacturer's lists of desirable feaures. For more
lostboy wrote:
I have sync problems when playing a local stream from DABBAR, but not
with stored music or internet radio (inc Alien BBC). I am running
Slimserver 6.1 (nightly of 18.5) on Windows 2000 with 1 x SB1
(wireless), 1 x SBG (wireless), 2 x SB2 (wired), 1 x SB2 (wireless).
Synch
I have os x 10.3
slimserver 6.1
sb1
I can get AAC to play, but lossless doesnt work at all. Slimserver
recognizes the track, tries to play it, then skips over the track.
Any suggestions?
sb
--
Scott
___
Discuss mailing list
Hi everyone. I'm checking ou the SlimDevices products so I thought I'd
give SlimServer a try. Browsing music through the web interface works
great except for one odd issue. If the web interface is displaying an
album that is comprised of FLAC files, most of the time the 2nd to the
last track
51 matches
Mail list logo
