[slim] Can't connect to Slimserver

Hi I'm having real trouble working out why my SB3 is so tempremental. I think I have two issues. Firstly the SB can't always find slimserver running from my PC. SServer is running from system tray on startup but I just can't view the slimserver page on my machine using local host or ip address.

[slim] Can't connect to slimserver anymore

I have been running an ad hoc wifi setup between my PC and SB3 perfectly well for a few months. But now i can not longer connect my SB3. The strange thing is that my PC seems show the connection is fine and when i go into view current settings it show the signal strengh as 90%. I have tried

[slim] Can't Connect to Slimserver - IP settings?

I can connect to the SqueezeNetwork, but not to Slimserver. Could it be that Slimserver is not running on the NAS (I installed a script to launch slimserver.pl automatically on boot), or would that give a different error message? Squeezebox connects to SqueezeNetwork via my wireless router.

[slim] Can't connect to Slimserver

I have posted this issue before, but the post has disappeared now, I havn't used my SB3 for a few weeks as I had to build a new PC due to motherboard failure. Anyway, I am using an SB3 over a wired network and am getting the message below appearing in the performance monitoring section. There

[slim] Can't connect to SlimServer

I bought a shiny new router today with a 5dbi wireless signal strength and Gigabit ethernet. My ZyXEL router wasn't giving me a strong enough signal. As far as I can tell, I can connect okay to the wireless network. I did a factory reset on the SB3 by pulling the plug then replugging whilst

[slim] Can't connect to slimserver anymore

I had to get my first faulty SB3 replaced. I just took delivery of the new one but cant get it to connect to slimserver. It's connected to my PC (wireless adhoc mode) fine but cant find slimserver. I have disabled my firewall but that has not helped. Where do i go from here? -- dangerous_dom

[slim] Can't connect to Slimserver

I am having an intermittent fault with my SB3. I unplugged the network cable earlier today to use the connection with a laptop. I have then plugged the SB3 back in, and now I only have an intermittent connection with the SB3. In using the laptop I made no changes to the network settings at all.