I believe this is accomplished with a factory reset, long press the
front button on the receiver until you get a fast blinking red LED on
the front. You will then have to set up the receiver from scratch,
either with the controller or NET::UDAP.
Main system - Rock Solid with LMS 8.1.2 on WHS
As far as I understand, complete lack of sound on this family of players
can often be fixed by reprogramming the Xilinx device. On players with
infrared remotes, initiating this process is simply a matter of pressing
the right button on the remote while connecting the power, but I have no
idea
I too have had great luck with the receivers, I have 2 (both work fine)
and have had 1 power supply failure and 1 wifi card failure over 10+
years and was able to get replacement parts for both. If I would have
had to solder I'd build a pi/DAC to replace it and I do have 1 pi/DAC in
service too.
Oh, I forgot to mention... I do not currently have a DAC so the only
test I can do with the digital outputs is to connect an optical cable
and see if the light blinks, which it does. (I currently do not have a
receiver with digital inputs. I'm driving a NAD 2-channel amp with only
analog
I have a Squeezebox Receiver (bought as part of a Duet) that no longer
produces analog sound. It appears to boot up and run just fine, because
I can see it in LMS and select playback tracks, and the front LED
changes color as expected as it boots up and starts playback. It
registers in LMS,