Hi Marcus,
I am not getting overflow,when i use uhd_fft. Can you please tell me what
might be the problem.
Thanks.
On Wed, Mar 20, 2013 at 1:10 PM, Marcus D. Leech mle...@ripnet.com wrote:
Hi,
I am getting overflow error ,even at low sampling rates.I am using USRP
N210 device.If the
Hi,
How to simultaneously transmit data to usrp and also store it in a file.? I
ran two separate flow graphs.But i want to have a sample rate of 25Mhz.Is
it possible to do it.
I want the same thing in receiver side also(simultaneously detect the
packet and store the data)
I am using USRPN210
Hi,
How to simultaneously transmit data to usrp and also store it in a file.?
I
ran two separate flow graphs.But i want to have a sample rate of 25Mhz.Is
it possible to do it.
I want the same thing in receiver side also(simultaneously detect the
packet and store the data)
I am using
Possibly Ubuntu sets up /usr/local to be regular-user
writeable, but that would be a horrible security flaw.
At least for my Ubuntu 12.04 /usr/local is owned by root:root with 0755
permissions and everything else would have given me nightmares ;)
Maybe you started the script with sudo, instead
I am transmitting and receiving using the USRP and both Leds A and C on. How to
check that i am correctly Transmitting and Receiving. and how to see the
Transmitted and received Signal?
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
when i run uhd_fft it runs ok but parallel i cannot run benchmark
so i must close the uhd_fft to run the benchmark_tx
as message appears that RuntimeError: LookupError: KeyError: No devices found
for -
Empty Device Address
although while searching i find video running both togothers. so how
when i run uhd_fft it runs ok but parallel i cannot run benchmark
so i must close the uhd_fft to run the benchmark_tx
as message appears that RuntimeError: LookupError: KeyError: No devices
found for -
Empty Device Address
although while searching i find video running both togothers. so
On Wed, Mar 20, 2013 at 10:10 PM, Sid Boyce g3...@blueyonder.co.uk wrote:
On 20/03/13 23:50, Tom Rondeau wrote:
On Wed, Mar 20, 2013 at 10:58 AM, Sid Boyce g3...@blueyonder.co.uk
wrote:
On 20/03/13 13:08, Tom Rondeau wrote:
On Tue, Mar 19, 2013 at 9:20 PM, Sid Boyce g3...@blueyonder.co.uk
On Thu, Mar 21, 2013 at 4:55 AM, Mohammed Ramadan
eng_mo7med2...@yahoo.comwrote:
I am transmitting and receiving using the USRP and both Leds A and C on.
How to check that i am correctly Transmitting and Receiving. and how to see
the Transmitted and received Signal?
Do you have another
On Thu, Mar 21, 2013 at 2:06 AM, john jade cooltrick@gmail.com wrote:
Hi Marcus,
I am not getting overflow,when i use uhd_fft. Can you please tell me what
might be the problem.
Thanks.
All uhd_fft does is connect a USRP source to an FFT sink. Problems
arise when you add more blocks to
My wife will demand a divorce when I start carrying such a pink Hello
Kitty device with me :) Is there a more serious looking version available?
Ralph.
http://ossmann.blogspot.com/2010/03/16-pocket-spectrum-analyzer.html
Tom
___
On Wed, Mar 20, 2013 at 3:06 PM, Sahoo, Anirudha
anirudha.sa...@nist.gov wrote:
Hi,
I am trying to implement an algorithm over the ofdm implementation
(modifying
benchmark_xx.py) so that the txmitter and rcvr can communicate changing
the subcarriers dynamically.
The scheme is
How about this:
http://hackaday.com/2010/02/12/spectrum-analyzer-wedged-into-a-cellphone/
:)
My wife would get a serious case of the giggles if I used a pink
spectrum analyzer.
MB
On Thu, Mar 21, 2013 at 02:23:43PM +0100, Ralph A. Schmid, dk5ras wrote:
My wife will demand a divorce when I
Much nicer :)
My Swiss army knife in RF is a RTL2832/E4000 stick, the Hama nano
DVB-T-Receiver.
http://dk5ras.dyndns.org/tmp/nano.jpg - unplugged after taking a look at a LTE
channel with it.
It is SMALL, it is (unlike the other cheap sticks) almost perfectly shielded,
when you unplug the
On Thu, Mar 21, 2013 at 9:36 AM, md...@nycap.rr.com wrote:
Hello everyone,
I am using GRC to receive digital signals. I am getting perfect audio and
perfect scopes. I hooked up a file sink directly to the receiving device
(RTL2832). On replaying the capture, the gui greys-out. The gui
Hello friends. One of the centers I belong to at Virginia Tech is
Wireless@VT. We run a conference every summer and we are holding it again
this summer.
http://www.wireless.vt.edu/symposium/2013/
And I know several of you are attending and we are looking forward to
hosting you.
At one time,
Just a quick reminder, the dev call will start in less than 1 hour.
Everyone is welcome; you can also just idle in #gnuradio and follow the
discussion there.
Cheers,
MB
On Wed, Mar 20, 2013 at 07:41:05AM +0100, Martin Braun (CEL) wrote:
Hi everyone,
small update: because of time zones
On 21/03/13 13:14, Tom Rondeau wrote:
On Wed, Mar 20, 2013 at 10:10 PM, Sid Boyce g3...@blueyonder.co.uk wrote:
On 20/03/13 23:50, Tom Rondeau wrote:
On Wed, Mar 20, 2013 at 10:58 AM, Sid Boyce g3...@blueyonder.co.uk
wrote:
On 20/03/13 13:08, Tom Rondeau wrote:
On Tue, Mar 19, 2013 at 9:20
It's #gnuradio on freenode. I think freenode has a web client.
OK, great, I am in - using miranda, I hate webclients :)
MB
Ralph.
___
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
I'm trying to make a block for fading channel model using hierarchical
block.
class channel(gr.hier_block2):
def __init__(self):
gr.hier_block2.__init__(self, channel,
gr.io_signature(1, 1, gr.sizeof_float),
gr.io_signature(1, 1, gr.sizeof_gr_complex))
On 03/21/2013 03:45 PM, Manu T S wrote:
I'm trying to make a block for fading channel model using hierarchical
block.
class channel(gr.hier_block2):
def __init__(self):
gr.hier_block2.__init__(self, channel,
gr.io_signature(1, 1, gr.sizeof_float),
Hi,
When I run benchmark_tx.py with -discontinuous flag ON, I notice
the following problem:
When the transmitter goes to sleep (for 1 sec), the receiver TIMEOUT (which
is fine).
But then when the txmitter wakes up and sends the next 5 packets, the receiver
consistently does not
receive the
On Thu, Mar 21, 2013 at 4:29 AM, Martin Luelf m...@mluelf.de wrote:
Possibly Ubuntu sets up /usr/local to be regular-user
writeable, but that would be a horrible security flaw.
At least for my Ubuntu 12.04 /usr/local is owned by root:root with 0755
permissions and everything else would
Maybe I should cast arbitrary object to binary data followed by
simple_framer block and bits_to_symbols block.Is it correct?
2013/3/20 1:47, Josh Blum wrote:
Isnt all data, custom data? So the streamer interface is still just
samples, as is the gr-uhd sink's input port. If you want to send
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello everyone,
Does anyone know to sniff packets coming out of gnuradio? I am
spinning my wheels trying to figure this out on my own. Is there some
sort of sink that goes to an ip address or a USB port that will show
up in wiresharks interface?
25 matches
Mail list logo