Hi Mohamed,
UHD 3.5.5, which you seem to be using, is so very old that it lacks
crucial features. You should definitely update your UHD version.
I assume you're using Ubuntu 14.04 (they are the only ones who still
ship this old UHD), so please
sudo apt-get remove uhd-host libuhd003 gnuradio
and
Dave,
the USRP has no notion of "channels". It's a concept that you have in
your software that deals with the samples coming from the USRP.
You can configure the USRP to arbitrary center frequencies.
Best regards,
Marcus
On 16.11.2015 03:06, Rama V wrote:
>
> I would like to send data through
Hi Roee,
On 16.11.2015 22:28, Roee Bar wrote:
> Hi Marcus,
>
> You understand correctly. I ran this experiment with USRP block
> 'length tag’ field enabled and another time with this field empty
> (these correspond to ‘signal_with_tag’ and ‘signal_without_tag’
> respectively).
>
> Regarding your
I'd like to emphasize on the possibilities for self-debug, in this case.
GNU Radio's cmake run closely describes which dependencies were missing
and which components therefore got disabled.
GRC needs python > 2.5 (I strongly recommend using 2.7 for compatibility
with out of tree modules),
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi David,
> 2) Should I set 'Number of Points' to 576?
Yes. The block will take this amount of points and display it. Then
wait a given time and take the next chunk to display it.
As long as the block does not have at least the specified amount of
As Marcus L. said:
Usually, your hard drive is the limiting factor. Try to write to a
vector sink instead of a file sink. Does it get better? Notice: Hard
drive write speeds are usually significant < 1Gb/s sustainably.
Best regards,
Marcus
On 11/17/2015 05:14 PM, scott tiger wrote:
> Thank you
Hello list,
I have a really tricky question that we have been working on during the last
few weeks. I am asking for any advice how to handle this issue:
In short: Samples input into the USRP sink do not appear at both hardware
outputs at the same time, but are set off by several sampling
On 11/17/2015 10:42 AM, Jason Matusiak wrote:
>> Arg, I forgot you are using rfnoc :) Sorry.
>> The latest e310 files with rfnoc are here:
>> http://files.ettus.com/e3xx_images/alpha/fido-rfnoc-test/
>> You could also update the release-3 image to have rfnoc also.
>
> So here is where things
Thank you very much for your reply.
There isn't any switch or router between USRP and computer. They are
connected by Ethernet cable.
the folow-graf is not complex at all, but the signal is transmitted from
the saved file and the received signal is recorded to hard disk. I tested
to do that on
Hi Roee,
you forgot that there is a delay between sending and receiving, and that
the receiver LO is not at the same phase as the transmitter LO.
So in your receiver I(t) and Q(t), you don't mix with a cos(w0*t) and a
-sin(w0*t), but with cos(w0*t+tau) and a -sin(w0*t+tau), respectively,
with
Dear all,
Can you please tell me, what is the max sample rate that can be used in
gnu-radio for SISO transmission with USRP 2 or N200 series? "of course
practically"
theoretically it is written up to 50M, but the max that I achieved is 12M.
any ideas about the host computer characteristic to
On Tue, Nov 17, 2015 at 4:43 AM, David Halls
wrote:
> Hi guys,
>
> I am trying to use a combination of a CC code and a repetition code. This
> might sounds a bit odd, but it just so happens I have 5 short ints 5*8
> bits, so I am repeating this 7 times, then using
On Mon, Nov 16, 2015 at 10:08 PM, Kevin McQuiggin wrote:
> Hi All:
>
> I have a .grc 2PSK demodulator working for the RDS subcarriers on FM radio
> signals. I note however that it takes a couple of minutes for the PSK
> demod hierarchical block to settle and give me consistent
On Tue, Nov 17, 2015 at 7:40 AM, Johannes Demel
wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Hi David,
>
> > 2) Should I set 'Number of Points' to 576?
> Yes. The block will take this amount of points and display it. Then
> wait a given time and take the
On Mon, Nov 16, 2015 at 1:30 PM, Vijay Galbaransingh wrote:
> Hello,
>
>
>
> I am trying to demodulate an on-off-keyed signal, and in doing so am
> trying to use the LMS-DD equalizer as follows:
>
>
>
> Source --> BPF --> AGC --> PLL --> RRC --> M Clk Recovery --> LMS-DD EQ
> -->
Hello Maksim,
The rate at which you can move samples to and from the USRP is highly
dependent on your hardware and particular setup. Do you have any switches
or routers in between your computer and the USRP? I recommend reading this,
admittedly in need of reformatting, wiki page which discusses
On 11/17/2015 10:13 AM, scott tiger wrote:
Dear all,
Can you please tell me, what is the max sample rate that can be used
in gnu-radio for SISO transmission with USRP 2 or N200 series? "of
course practically"
theoretically it is written up to 50M, but the max that I achieved is 12M.
any ideas
> Arg, I forgot you are using rfnoc :) Sorry.
> The latest e310 files with rfnoc are here:
> http://files.ettus.com/e3xx_images/alpha/fido-rfnoc-test/
> You could also update the release-3 image to have rfnoc also.
So here is where things ended up. The default E310 load from OCT (in
the link
On 17.11.2015 08:34, Marcus Müller wrote:
> As Marcus L. said:
>
> Usually, your hard drive is the limiting factor. Try to write to a
> vector sink instead of a file sink. Does it get better? Notice: Hard
> drive write speeds are usually significant < 1Gb/s sustainably.
Yep, the Marcuses are
Hi Stephan,
some prelims first: Can you manually sync the devices using
set_time_unknown_pps() before running the flow graph? I would like to
rule out VITA time issues.
Also, your way of setting the time should work; it's the same code as if
you were using tx_time tags. Although, that's
Hi all,
I am using QT, finally, but I am struggling with the 'refresh rate' on the
Constellation Sink.
My system receives one packet of 576 symbols (points), every second (slow!). I
would like the plot to display all 576 each second, then wipe, and show the
next 576 etc. There seems to be a
Dear Dave,
> So this channel concept lies in GNU Radio.
No. The concept "channel" is how you, as a signal processing expert,
look at a piece of spectrum. GNU Radio just sees samples.
If you build a GNU Radio system that filters out specific parts of the
spectrum that *you* consider to be the
A "channel" is really just a high-level, somewhat arbitrary, agreement
berween a sender and a receiver on how to view a particular hunk of
spectrum. It will vary, depending on the application.
For example, broadcast television divides its spectrum up into
6 MHz wide channels. Broadcast FM, on
Changing to the non-causal AGC so that samples are <=1 and adding -0.5 so
that it is zero-biased worked. The equalizer output now performs as expected
in GRC and has cleaned things up considerably.
Leads to another question though: my final target for this is Android, which
means writing the
Yes, the images came ok.
Using your original example of transmitting I(t)=cos(wm*t), Q(t)=sin(wm*t),
let’s take I(t)=cos(wm*t) and Q(t)=0:
sout(t) = cos(wm*t)*cos(wo*t) - 0*sin(wo*t) = 1/2 * [ cos(wm*t-wo*t) +
cos(wm*t+wo*t) ]
At the receiver (sorry if the derivation is too explicit):
I(t) =
Hi Will,
we have a similar problem with our set-up, and hence I can somehow confirm your
findings, although we do not have a solution/explanation (yet), either.
We have a 2x2 MIMO N210 system (with MIMO cable and w/o GPSDO) in burst-mode
(PDU messages from message strobe are issued every
Hi guys,
I am trying to use a combination of a CC code and a repetition code. This might
sounds a bit odd, but it just so happens I have 5 short ints 5*8 bits, so I am
repeating this 7 times, then using 1/2 rate to fill my packet - 576bits.
I can get the codes to work separately, but please
hello
i tried to implement FM reciever from this video :
https://www.youtube.com/watch?v=KWeY2yqwVA0
but the problem is that everytime i need to run the grc an error show which
is:
--
linux; GNU C++ version 4.8.2; Boost_105400;
Thanks for the reply Marcus. So this channel concept lies in GNU Radio. How
can I really set from what channel I need to send the data or which
channels are free for the transmission. Do I need to write any code for
that? I am performing DARPA Spectrum competition wherein I need to perform
data
29 matches
Mail list logo