asari wrote:
>>
>> Hi Hasini,
>>
>> If you are trying to print just the FFT, it should not be an issue. If
>> you print raw iq samples, then you will run out of memory. By long, you
>> mean how long? Days?
>>
>> On Tue, Jan 10, 2017 at 3:16 PM,
Hi all,
I have a flowgraph that reads a signal and writes its FFT samples to a
file. I need to run this continuously (for a long time), without running
out of memory.
I tired deleting the earlier FFT samples from the file but that messes up
with reading the data. I also tried starting writing to
tually being flushed. Rethinking the problem is likely
> the best way forward.
>
> I highly recommend option 1 and option 2 as a last resort. Option 2 is
> better for when you're no longer doing DSP and passing something like bits
> to another process that's great at handling bits.
it. I need
this to be done real time and that's why I'm looking for the most efficient
way.
Regards,
Hasini
On Tue, Sep 20, 2016 at 10:34 AM, West, Nathan <n...@ostatemail.okstate.edu>
wrote:
>
> On Mon, Sep 19, 2016 at 6:57 AM, Hasini Abeywickrama <hva...@gmail.com>
>
; Best regards,
>
> Marcus
>
>> On 09/18/2016 11:21 PM, Hasini Abeywickrama wrote:
>> Hi Marcus,
>>
>> It's like I need to start reading and processing the file after a certain
>> number of FFTs are being written to the file. For that I would nee
> Marcus
>
> On 09/18/2016 10:23 PM, Hasini Abeywickrama wrote:
>
> Hi all,
>
> I have a GNU Radio flowgraph which uses a USRP to receive a signal,
> converts it to log power FFT and then writes the result to a file, using
> File Sink. I want to have a counte
Hi all,
I have a GNU Radio flowgraph which uses a USRP to receive a signal,
converts it to log power FFT and then writes the result to a file, using
File Sink. I want to have a counter which increments with each FFT written
to the file.
Is there a way of maintaining and increasing count of the
Hi all,
I have a flowgraph that users a USRP to receive signal and writes it to a
file using a file sink.
I want to start writing to the file and a specific time precisely. I
modified the code to start running the flowgraph at a specific time but
booting up the USRP and setting up the flowgraph
Cool. I will try that.
Thank you very much :)
On Fri, Sep 2, 2016 at 12:08 PM, Marcus D. Leech <mle...@ripnet.com> wrote:
> On 09/01/2016 10:05 PM, Hasini Abeywickrama wrote:
>
> Hi Dan,
>
> I have tried different gain values from 0 to 20.
>
> On the TX side, the B
Hi Dan,
I have tried different gain values from 0 to 20.
On Fri, Sep 2, 2016 at 9:35 AM, Dan CaJacob <dan.caja...@gmail.com> wrote:
> What gain are you using?
>
> On Thu, Sep 1, 2016 at 7:32 PM Hasini Abeywickrama <hva...@gmail.com>
> wrote:
>
>> Hi Dere
the TX LED come on and the RX LED on the other one?
>
> Thanks,
> Derek
>
> On Wed, Aug 31, 2016 at 10:31 PM, Hasini Abeywickrama <hva...@gmail.com>
> wrote:
>
>> Hi,
>>
>> I have a USRP B200 set to transmit a signal (using uhd_tx_dpsk.grc in the
>> G
Hi,
I have a USRP B200 set to transmit a signal (using uhd_tx_dpsk.grc in the
GNURadio examples) and another USRP B200 receive the signal (using
uhd_rx_dpsk.grc in the GNURadio examples). But the receiving USRP does not
receive the signal that is being transmitted by the other USRP, even though
Thank you very much for the information.
On Thu, Aug 25, 2016 at 10:44 AM, Marcus D. Leech <mle...@ripnet.com> wrote:
> On 08/24/2016 08:28 PM, Hasini Abeywickrama wrote:
>
> Hi all,
>
> I have flowgraph that receives a signal from a USRP and converts it to log
> p
Hi all,
I have flowgraph that receives a signal from a USRP and converts it to log
power FFT and then writes the result to a file, using File Sink.
I want to understand how writing to the file works.
- If the signal is received for *n *seconds and it takes *m *seconds to
write to the
14 matches
Mail list logo
