[Discuss-gnuradio] FPGA image build incorect size

I have been following the instruction for Getting Started with RFNOC Development. I have made it to the point of generating a custom FPGA image with the following command ./uhd_image_builder.py window fft -d x310 -t X310_RFNOC_HG -m 5 --fill-with-fifos with the following status on completion

[Discuss-gnuradio] Problem building FPGA image in RFNOC

I am going through the Getting Started with RFNOC guide and the following command fails $ ./uhd_image_builder.py window fft -d x310 -t X310_RFNOC_HG -m 5 --fill-with-fifos I have installed a licensed version of Vivado 2017.4 When I run the above command the output is: --Using the following

[Discuss-gnuradio] RFNOC FPGA build issues

I have installed GNUradio and UHD from PyBOMBS as described in the following ettus webpage https://kb.ettus.com/Getting_Started_with_RFNoC_Development When I try to build the FPGA image with some built-in RFNOC blocks I get errors. the webpage calls out a different base FPGA image to mod

[Discuss-gnuradio] PyBOMBS install GRC and UND errors on Ubuntu 18.04

I have installed GRC and UHD via PyBOMBS on Ubuntu 18.04. I am working with a Ettus x310. I cab successfully run uhd_usrp_probe launch GRC that finds the SDR correctly. I wrote a simple GRC program that creates a tone, sends it to the transmitter ad then through a loopback to the receiver

Re: [Discuss-gnuradio] PyBOMBS install issues

r > cycling them, and then trying again. > > Good luck! > > -Dave > > On Thu, Sep 20, 2018 at 5:36 PM John_w_g wrote: > >> I am using Ubuntu 18.04 and the only listed GRC version in the ppa is >> version 3.13.0.1 >> >> I have an Ettus x310 and have

[Discuss-gnuradio] Correct GRC version for UHD 3.13.0.1

I am using Ubuntu 18.04 and the only listed GRC version in the ppa is version 3.13.0.1 I have an Ettus x310 and have downloaded the correct FPGA image and verified correct operation with uhd_usrp_probe. I have GRC 3.7.11 installed and when I attempt to access the x310, I get an incompatible