On 09/19/2016 05:46 AM, pen tester wrote:
> Hi Ron,
> Thank you for that tx grc graph, it is super helpful!
>
>I am just trying to get a receive work now. I am using the 6_psk.grc
> from the tutorial folder in the github repo you were using [1].
>
> I have modified mine for using a hackr
Hi Ron,
Thank you for that tx grc graph, it is super helpful!
I am just trying to get a receive work now. I am using the 6_psk.grc
from the tutorial folder in the github repo you were using [1].
I have modified mine for using a hackrf on tx side and on rx side I
modified to use the same sa
I have an alternative flow graph. It's based on the multi_tx.grc flow
graph in https://github.com/argilo/sdr-examples. The osmocom Sink is set
up for a bladeRF, so be sure to change that for hackRF. The message in
the Vector Source block in "This is W6RZ testing." with a trailing line
feed.
h
On 09/10/2016 05:19 PM, pen tester wrote:
> Thanks Cinaed for your response.
>
> For everything up to the multiply on the TX side - this is actually from
> a working example that TXs using an audio card [1]. So just for a proof
> of concept I would like to leave that as-is and just append on TX ov
Thanks Cinaed for your response.
For everything up to the multiply on the TX side - this is actually from a
working example that TXs using an audio card [1]. So just for a proof of
concept I would like to leave that as-is and just append on TX over Osmocom
Sink. Happy to look at simplifying later,
On 09/09/2016 06:40 PM, pen tester wrote:
> Hi,
>Still playing around and I have a question about the value which
> should go in the Polyphase Resampler on the tx side please. Any advice
> on the AM rx too would be helpful :-)
Looking at transmit.
It appears you start with something in memory
Hi,
Still playing around and I have a question about the value which should
go in the Polyphase Resampler on the tx side please. Any advice on the AM
rx too would be helpful :-)
Transmit
- Simply trying make the working PSK31 audio tx to tx over HackRF
instead using [1] and updates from
Tim,
Yes, your graphs are really useful :-) Thank you for responding in such
detail!
Here is what I am up to:
Transmit side:
- I made your changes to your transmit graph [1]
- All the changes were fine but I was confused about the use of the
Polyphase
Resampler as I could not get
Hey hey!
Glad to see someone using this. (And that it's apparently still working!
Goodness... I need to clean this up...)
I'm giving advice freehand right now, as I don't have my radios with me to
test this. There are definitely more elegant ways for this solution, this
is just the quickest I cou