ok thanks I did reformat it
jouteur's Profile: http://forums.slimdevices.com/member.php?userid=67128
View this thread: http://forums.slimdevices.com/showthread.php?t=107843
___
d
>From a windows computer run from cmd window arp - a you will get a list
of Mac (hardware adresses) and corresponding ip addresses.
*SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x
Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden)
1x OSMC + Squeezelit
jouteur wrote:
> I have tried to put the wifi on via the newconfig.cfg file but it always
> recreated an usedconfig.cfg file
That's the way it works. :)
During the boot process it reads newconfig.cfg and writes wifi
configuration to config.cfg. To show that it has been used,
newconfig.cfg is re
Greg Erskine wrote:
> hi jouteur,
>
> You may need to connect a monitor and keyboard and run $setup
>
> This How-to shows the start screen of setup. Select "Static IP" instead
> of "Wifi" of course.
>
> http://picoreplayer.sourceforge.net/how_to_setup_wifi_on_pcp_without_ethernet.shtml
>
> re
hi jouteur,
You may need to connect a monitor and keyboard and run $setup
This How-to shows the start screen of setup. Select "Static IP" instead
of "Wifi" of course.
http://picoreplayer.sourceforge.net/how_to_setup_wifi_on_pcp_without_ethernet.shtml
regards
Greg
Jeff07971 wrote:
> Silly !!!
> Do you know what IP you set it for ?
> Did it conflict with another device
> If so set your PC to an IP on the same subnet and remove all other
> devices except PC and Pi
>
> If not download Pcp burn to sd card then start again
>
> You MAY be able to change IP fro
jouteur wrote:
> Hi
>
> trying to resolve my problem this morning (see forum on LMS) I messed up
> my static IP I think
> now I cannot see pcP on the address I uses to connect, and I cannot see
> it on my network either..
>
> how can I reset the whole thing???
>
> Thank you FOR YOUR HELP
Sill