Google might mangle the patch. Feedback welcomed.
RFC 8624 Section 3.1 (https://www.rfc-editor.org/rfc/rfc8624.txt )says:
3 | DSA| MUST NOT| MUST NOT
6 | DSA-NSEC3-SHA1 | MUST NOT| MUST NOT
I've added them on this gh repo:
1) Remove
Unfortunately I’m dealing with an obnoxious firewall that rejects EDNS
packets. DNSMASQ eventually resends without EDNS, but is it possible to
disable EDNS entirely or for replies to a specific host? I tried setting
the max EDNS packet size to 512 and below but still no luck.
(Ideally the
On Sun, Feb 23, 2020 at 09:57:20PM +0100, Geert Stappers wrote:
> On Sun, Feb 23, 2020 at 08:41:28PM +0100, William Edwards wrote:
> >
> > Hi,
> >
> > I have a 'dhcp-script'. It is being called with "add" and "old" upon
> > requesting DHCP lease, but when a lease expires,
> > it is not called
On Sun, Feb 23, 2020 at 08:41:28PM +0100, William Edwards wrote:
>
> Hi,
>
> I have a 'dhcp-script'. It is being called with "add" and "old" upon
> requesting DHCP lease, but when a lease expires,
> it is not called with "del".
>
> To test, I changed lease time to 1 minute and kept an eye on
>
Hi,
I have a 'dhcp-script'. It is being called with "add" and "old" upon requesting
DHCP lease, but when a lease expires, it is not called with "del".
To test, I changed lease time to 1 minute and kept an eye on
/var/lib/misc/dnsmasq.leases . After 1 minute, the lease disappeared from
Hello Pali,
Thank you for your answer.
I am aware RAs are supposed to be sent by routers. I attempted using dnsmasq
for RAs, because it seemed easier than getting RAs to be sent from my VRRP
address as source address.
I have enough information to proceed with dnsmasq configuration.
Met
On Sunday 23 February 2020 11:41:47 William Edwards wrote:
> Question: how do I configure dnsmasq to supply a user-specified default
> gateway address in RAs?
Hello William! This is not possible as IPv6 gateway (router) address is
not present in RA packet structure. If client receives RA packet
Hello,
I use dnsmasq to provide DHCP. IPv4 is working well, but I'm struggling to
configure IPv6. I use DHCPv6 and Router Advertisements and get a /64 when
requesting a DHCP lease, which is according to my configuration.
However: the RA contains a default route to the dnsmasq server, but the
