as userdb and passdb source.
I have written an more in detail explanation that is available at
http://www.stos.se/?q=node/12 .
The question remains; Will Dovecot ever be compatible with Drupal 7
password hashes?
Regards
Tobias Rådenholt
i...@stos.se wrote 2013-03-11 17:57:
Hi
I'm trying to get
Have you tried the latest Thunderbird Version (Thunderbird 3)? I have been
told that IMAP Support should be much better than in older versions
On Mon, 14 Dec 2009 00:42:02 -0800, Beto Moreno pam...@gmail.com wrote:
Hi people.
I ask this because I'm confuse about the namespace stuff.
I
On Mon, 28 Dec 2009 14:30:14 +0100, Florian Effenberger flo...@gmail.com
wrote:
Hello,
I use Thunderbird as IMAP client and do a lot of server-side filtering
with Sieve scripts. To be notified of new mails, I want to check all
folders (a lot of them...) at once for new mails, and not only
On Tue, 29 Dec 2009 09:48:46 +0100, Papp Tamas tom...@martos.bme.hu
wrote:
hi All,
I have a srange problem.
Before dovecot there was a courier imap and it worked just fine. The
client(s) are the same then before, so I think, this is an server side
problem.
I have a user with Outlook
On Tue, 29 Dec 2009 11:27:49 +0100, Papp Tamas tom...@martos.bme.hu
wrote:
Tobias wrote:
Is that a problem with other MUAs too? Or is Outlook the only affected
one?
You tried Thunderbird or Windows Live Mail to verify?
No, the users are using only Outlook. Should I try it with TB
/Variables
The domain part is added by postfix. Postfix most often requires some
kind of domain, and if not added will append one (unless you have an
unorthodox configuration). It's not recommended to remove this feature
from your postfix configuration.
/Tobias
On 2016-06-17 16:10, Doug Hardie wro
-originating-ip), perhaps with a notice to try again in X
seconds, instead of delaying them?
/Tobias
On 2016-06-24 13:27, Tobias wrote:
The wiki states that anvil's authentication penalties are skipped when
IP is in login_trusted_networks.
http://wiki.dovecot.org/Authentication/Penalty
Is there a way
works", and it advertises the originating remote IP
via 'ID ("x-originating-ip", "")'?
And with regards to HAproxy, is anvil's authentication penalties by
default transparent with regards to the remote IP advertised in the
proxy protocol header?
/Tobias
This is a cross-post from the squirrelmail-devel list.
It may be of interest if you want to run SquirrelMail and connect to
Dovecot (and Postfix, possibly other servers) on a remote host using
STARTTLS.
BR
Tobias
Forwarded Message
Subject:[SM-DEVEL] 4 bugs, IMAP
=
maildir:/var/vmail/%d/%n/Maildir:INDEX=/var/vmail/indexes/%u
prefix =
separator = /
subscriptions = yes
type = private
}
Have I got a problem with my namespace config?
Regards,
Tobias Hachmer
for your email
account.
We do have an MX record in DNS pointing to our server.
Enter settings manually or set up automx (http://www.automx.org/).
Regards,
Tobias Hachmer
Hello.
I'm switching from b1gmail to my own setup which consists of
Postfix+Dovecot+MySQL (and maybe VBoxAdm). There are two problems: -
b1gmail is using unsalted MD5 hashes. Is there any good way to make my
new setup backward compatible? So I don't have to force all of my 50k
users to change
, I will test, thanks!
Regards,
Tobias Hachmer
://launchpadlibrarian.net/124478979/buildlog_ubuntu-precise-
amd64.dovecot-2.1-pigeonhole_0.3.3-7~kokelnet~precise_FAILEDTOBUILD.txt.gz
Thanks in advance for any help,
Tobias Hachmer
Making all in lib-sieve-tool
make[4]: Entering directory `/build/buildd/dovecot-2.1-
pigeonhole-0.3.3/src/lib-sieve
,
Tobias Hachmer
package.
Regards,
Tobias
Hi!
I've got dovecot 1.0.rc15.
I want dovecot to listen only on localhost for imap, and on any interfaces for
imaps. So I put the following into my config:
protocol imap {
listen = 127.0.0.1:143
ssl_listen = *:10993
..
}
dovecot -n correctly reports:
listen: 127.0.0.1:143
ssl_listen:
, and there was no way to say thunderbird stop try moving.
So the only way was to delete thunderbirds mail cache.
I think it would be very nice, if dovecot doesn't die, just because the client tries to move a
message, which isn't there.
Thanks,
Tobias Daucher
--
Dr. Nagler Company GmbH
Hauptstraße 9
92253
), and it
is still trying to use maildir quotas:
Your user_query in dovecot-sql.conf overrides the quota setting.
Same problem here.
But how can I use maildirsize quota user_query in dovecot-slq.conf ?
I want to manage my users in a sql table and use maildirsize quota.
Greetz, Tobias
On Tue, 6 Sep 2011 23:08:37 +0300, Timo Sirainen wrote:
On 6.9.2011, at 23.01, Tobias Hachmer wrote:
On Mon, 5 Sep 2011 08:39:39 +0300, Timo Sirainen wrote:
On 5.9.2011, at 4.28, Kyle Brantley wrote:
Okay, something else isn't cooperating with this at all. I
reconfigured it to use dirsize
to the new naked machine?
Greetz, Tobias
On Fri, 09 Sep 2011 15:22:54 +0200, Robert Schetterer wrote:
Am 09.09.2011 15:14, schrieb Tobias Hachmer:
What is the best way to copy the existing mailboxes from the older
machine running dovecot v1.2.15 to the new naked machine?
i used imapsync in a bash script
http://ks.lamiral.info
get how
to use for migration.
As far as I understood it's to keep several dovecot server at a unique
data bank. An well, can I use it between dovecot v1.2 and v2?
Tobias
for your replies, I will test first the simple copy of the
maildirs when the new server is set up.
So thanks a lot.
Greetz, Tobias
for the hint. Yes, I will test simple copy, imapsnc
and dsync.
Thanks a lot.
Tobias
? Also for new created folders?
Greetz, Tobias
Hello list,
is there a way to use Dovecot SASL Authentication for submission on a
different machine dovecot runs?
e.g.:
Dovecot machine - postfix machine(for submission)
How can I authenticate my senders on a different physical machine
against Dovecot SASL?
Thanks,
Tobias
Am 05.11.2011 17:01, schrieb Timo Sirainen:
On Sat, 2011-11-05 at 15:13 +0100, Tobias Hachmer wrote:
is there a way to use Dovecot SASL Authentication for submission on
a
different machine dovecot runs?
With v2.0 you should be able to add inet_listener for auth service,
which acts as an auth
Am 05.11.2011 17:35, schrieb Timo Sirainen:
On Sat, 2011-11-05 at 17:31 +0100, Tobias Hachmer wrote:
Am 05.11.2011 17:01, schrieb Timo Sirainen:
On Sat, 2011-11-05 at 15:13 +0100, Tobias Hachmer wrote:
is there a way to use Dovecot SASL Authentication for submission
on
a
different machine
else? Either directly in LDAP, or in some
database, or a common directory for all user's sieve files?
/Tobias
I am running Maildir (obtained via [mac|darwin] ports) on my Powerbook Pro
to operate as local mail storage. My mail is stored in the Maildir format.
Is it possible to set Maildir not to put a dot in front of the directory
names? (e.g., ~/Maildir/somefolder instead of ~/Maildir/.somefolder).
someone will port 1.1.1 to MacPorts soon and I can make
the change. I appreciate your answering my question.
Tobias
On Fri, Jul 11, 2008 at 1:12 AM, Kyle Wheeler [EMAIL PROTECTED]
wrote:
On Thursday, July 10 at 07:14 PM, quoth Tobias Zimmerman:
I am running Maildir (obtained via [mac|darwin
Am 02.08.2010 um 16:34 schrieb Timo Sirainen:
On Thu, 2010-07-29 at 13:28 +0200, Tobias Joch wrote:
the following patch for the mail_log plugin (source version = 1.2.13) adds a
new logging event mailbox_create.
Perhaps this is also of interest to other people except me ;)
I added
Hi there again,
I just wanna tell you what little bug we've found...
Namespace is in mbox format.
After deleting an mbox the entry in the .imap stays so not everyting is
moved away and ist just hanging around...
not so bad, but would be nice if it was cleaned up...
thanks
Tobi
--
Dr. Nagler
Hi,
I'm trying to convert mailboxes from mbox zu mdbox.
The following command was performed:
dsync mirror -u tsdauche mbox:~/.NCmail/Drafts
dsync(tsdauche): Fatal: execvp(-u) failed: No such file or directory
dsync(tsdauche): Panic: file dsync-worker-local.c: line 185
Hi,
ACL works fine now...
But is it possible so allow users the creation of specific folder names?
so users should be able to create a folder Sent but not the folder
Send or something like that
I just want to allow some folder names and only THESE folders...
Thanks for you help!
Tobi
--
Dr.
Am 14.10.2010 18:33, schrieb Timo Sirainen:
On Wed, 2010-10-13 at 07:55 +0200, Tobias Daucher wrote:
Hi,
I'm trying to convert mailboxes from mbox zu mdbox.
The following command was performed:
dsync mirror -u tsdauche mbox:~/.NCmail/Drafts
dsync -u tsdauche mirror mbox:~/.NCmail/Drafts
Am 14.10.2010 17:23, schrieb Timo Sirainen:
On Tue, 2010-10-12 at 16:30 +0200, Tobias Daucher wrote:
Hi there again,
I just wanna tell you what little bug we've found...
Namespace is in mbox format.
After deleting an mbox the entry in the .imap stays so not everyting is
moved away and ist
Hi,
we found a serious bug while testing our migration scripts.
in Solaris (or other system 5) the user variable is not always set.
Dsync is not very happy about that and crashes with an segmentation fault.
After hours of debugging and TWOE simple lines
# USER=$LOGNAME
# export USER
the problem
of users...
i hope you can help me! thanks a lot!
Tobias Daucher
Am 25.10.2010 15:53, schrieb Timo Sirainen:
On Sat, 2010-10-23 at 16:27 +0200, Tobias Daucher wrote:
Hi there,
after migration we have a very big problem...
there are two mailboxes in /var/mail/username/mailboxes/
/var/mail/username/mailboxes/inbox
/var/mail/username/mailboxes/inbox2
So
Am 27.10.2010 20:26, schrieb Daniel Luttermann:
Dr Matthew Williams wrote on 10/27/2010:
Hello,
I have been investigating mailbox conversions and have used the convert
plugin under Dovecot V1.x. I cannot find the plugin in the list on the
wiki for Dovcot V2.x, is it not included for a reason?
Am 28.10.2010 16:35, schrieb Daniel L. Miller:
Just made the leap from 1.2 to 2.0.6 - and several maddening config typos I
think I have a working
system again! Getting closer to converting from maildir to mdbox, but first...
Trying to use dsync gives me:
dsync(root): Fatal: Mail locations must
Got the same problem with thunderbird... thunderbird wants to be intelligent and caches
information...
the server would remove the message, but thunderbird says hey it was not me so i don't anything
about moving and reads the message from its cache...
close thunderbird, delete the imapmail
Hi there,
is it possible in any way to have private seen flags for users in a shared
mailbox?
http://wiki2.dovecot.org/SharedMailboxes/Shared says no, but i'm not sure, if newer mailbox formats
can do this... like mdbox oder something like that.
thanks for your help
Tobi
--
Am 10.01.2011 14:59, schrieb Nick Rosier:
Hi,
I'm still trying to migrate from Dovecot 1.2.16 to 2.0.7 on FreeBSD. Previous
attempts have failed
with mails not being visible after the upgrade. Version 1.2.16 was migrated
from maildir to dbox
about a year ago via the convert-plugin. After
)
# v2.2 code tree:
hg clone http://hg.rename-it.nl/dovecot-2.2-pigeonhole/
Regards,
Tobias Hachmer
:
quota_final_add_on
What means surplus?
Why not simplify things and calll it
- quota_mailplus
- quota_plusmail
- quota_oneplus
- quota_plusone
Tobias Hachmer
Am 28.12.2009 um 11:55 schrieb Steve Wagner:
if header :contains Organization web.de { discard; stop; }
This often works, but sometimes it fails. Procmail reports then that
deliver reported an error (but not which) and delivers them to my inbox.
There are also no message in dovecots or
Am 28.12.2009 um 13:02 schrieb Steve Wagner:
Hi Tobi, yes but it is correct. It should only discard messages that
have this header. The sieve filter is larger, this are only the parts
witch use discard.
Steve
Am 28.12.2009 12:25, schrieb Tobias Lang:
Am 28.12.2009 um 11:55 schrieb
Am 28.12.2009 um 14:34 schrieb Steve Wagner:
Ok ive tested it. The sieve script works as expected.
The only error message i have, come from procmail.log:
24918-Folder: /opt/dovecot/libexec/dovecot/deliver
3720
24919-procmail: Error while writing to
Am 28.12.2009 um 16:14 schrieb Florian Effenberger:
Hi Tobias,
This might be help you...
**quote**
If Thunderbird doesn't recognize that a folder contains unread messages try
setting mail.imap.use_status_for_biff true. It causes Thunderbird to
explicitly select each folder to update
Am 28.12.2009 um 15:09 schrieb Steve Wagner:
[snip]
:0 w
| /opt/dovecot/libexec/dovecot/deliver
Looks uncritical to me. Although there is no default rule at the end of
.procmailrc, Dovecot deliver and Sieve should reroute everything not
catched by a rule to INBOX.
Did Procmails VERBOSE=on
Anfang der weitergeleiteten E-Mail:
Von: Steve Wagner lan...@lanwin.de
Datum: 28. Dezember 2009 21:51:39 MEZ
An: Tobias Lang tobias.l...@evoscout.de
Betreff: Re: [Dovecot] Dovecot-deliver sometimes fails when message set to
discard via sieve
Sorry it took some time to get
Am 28.12.2009 um 21:51 schrieb Steve Wagner:
Sorry it took some time to get in to this failing situation.
Procmail log--
procmail: [29952] Mon Dec 28 21:36:33 2009
procmail: Match on 256000
procmail: Locking spamassassin.lock
procmail: Executing /usr/bin/spamc,-U,/var/run/spamd.sock
Hello,
while installing Dovecot sieve, I am not able to deliver email for root. The
strange thing is,
that mails to ordinary users get delivered. And no, I do not use virtual mail,
just ordinary
unix accounts with an entry to passwd / shadow.
Also before switching from Postfix deliver to
Am 28.12.2009 um 11:55 schrieb Steve Wagner:
if header :contains Organization web.de { discard; stop; }
This often works, but sometimes it fails. Procmail reports then that
deliver reported an error (but not which) and delivers them to my inbox.
There are also no message in dovecots or
Am 29.12.2009 um 12:58 schrieb Julian Cowley:
Hello,
Here is a small script that I've been running to test a problem I've been
seeing. Shouldn't this result in the mail being delivered to the inbox as a
new message (ie. without the \Seen flag)?
require imap4flags;
addflag
Am 29.12.2009 um 22:34 schrieb Timo Sirainen:
On Fri, 2009-12-25 at 13:30 +0100, Tobias Lang wrote:
while installing Dovecot sieve, I am not able to deliver email for root.
That's because you should be redirecting root's mails to some other
user. root shouldn't have mail.
Well, I do
we have setup a two level proxy configuration for our zimbra server:
[ dovecot 2.2.12 (imap proxy mode) ]
V
[ nginx (imap proxy mode) ]
V
[ zimbra imap server]
and it does not work ... after tying a login, the connection just
hangs and ends after 30 seconds with a
Hi Net,
How can I enable debug messages in the imap-proxy client?
Trying to figure why the imap-proxy mode does not work towards
ngnix.
specifically, how can i set
conn-client-set.debug in ./src/lib-imap-client/imapc-connection.c
cheers
tobi
--
Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15
Hi Teemu,
Today Teemu Huovila wrote:
On 04/01/2014 05:49 PM, Tobias Oetiker wrote:
specifically, how can i set
conn-client-set.debug in ./src/lib-imap-client/imapc-connection.c
Set mail_debug = yes somewhere in your configuration file(s).
hmm that does not seem to get ./src/lib-imap
)))
pass_filter = ((ObjectClass=user)(sAMAccountName=%u))
default_pass_scheme = plain
could anybody help me with this problem?
Thanks in advance!
Regards,
Tobias Dummert
-To
/Tobias
delivered.
Have anyone successfully tackled this conundrum with other solutions?
Regards,
Tobias
have the maildir stored directly in the user's home
folder, e.g. "/var/spool/vhosts/nimmini.de/a.meyer", and your global
mail_location already is "maildir:~/", then you only need to return a
proper "home" attribute from SQL.
BR
Tobias
backup "maildir:${destination}
But this is not working.
a) does nothing, no error
b) Error message: doveadm(dove...@domain.com): Fatal: -N parameter requires
syncing with remote host
Any ideas?
# dovecot --version
2.2.13
--
Tobias Kirchhofer
tob...@kirchhofer.net
signature.asc
Description: OpenPGP digital signature
specific setup which more precisely fits
your need.
There are also other strategies achieving Shared Folders the Cyrus way. :)
Hope that helps.
Tobias
On 28 Nov 2016, at 15:38, Michael Fox wrote:
> No answer. Trying again. Surely someone with experience with public
> mailboxes can offe
:)
On 29 Nov 2016, at 6:34, Michael Fox wrote:
> Thanks Tobias. Thanks for the detailed reply.
>
>
>
> I think I see what you’re doing. But I’m unclear on something (since I’m a
> nube):
>
>
>
> Can anyone send mail to n...@domain.com <mailto:n...@domain.com>
rly configure
>> everything.
>
> Yes! Agreed! That's why I'm trying to think through the whole thing before
> diving down a rabbit hole that leads to a dead end.
>
>> And a lot of try out :)
>
> For sure. (Just as soon as I understand what I'm trying to do.) ;-)
>
> Michael
--
Tobias Kirchhofer
tob...@kirchhofer.net
signature.asc
Description: OpenPGP digital signature
Hi,
i have a plesk server with postfix an dovecot.
Webmail is roundcube.
Version of Dovecot is 2.3.0.1
I want apple clients to use the default special folders.
My config for namespaces worked till last week.
Now I cant get it to work again.
Hope someone can help me.
# 2.3.0.1 (ffd8a29):
Hi, we experience trouble with one of our virtual mailboxes.
dovecot-virtual:
`
*
-INBOX/Trash
-INBOX/Spam
all
`
Error log:
```Error: virtual index
/var/vmail/mailboxes/kirchhofer.net/tobias/virtual/all: Broken
mailbox_count header```
This happens only with the filter form above. All
On 2 Jan 2019, at 9:27, Aki Tuomi wrote:
Please provide doveconf -n
Sure:
https://crypto.shift.agency/?66a9e34e83032c3e#ovF5Yq5qTNa8ii7Qup4oy8h5HyEVLKl/RbhCFpQGkkY=
Aki
On 02 January 2019 at 10:26 Tobias Kirchhofer
wrote:
Hi, we experience trouble with one of our virtual mailboxes
have to name each Namespace explicitly?
Aki
On 02 January 2019 at 10:40 Tobias Kirchhofer
wrote:
On 2 Jan 2019, at 9:27, Aki Tuomi wrote:
Please provide doveconf -n
Sure:
https://crypto.shift.agency/?66a9e34e83032c3e#ovF5Yq5qTNa8ii7Qup4oy8h5HyEVLKl/RbhCFpQGkkY=
Aki
On 02 January 2019
On 14 Feb 2020, at 14:05, Armin Schindler wrote:
On 2/14/20 11:44 AM, Tobias Kirchhofer wrote:
On 14 Feb 2020, at 11:06, Armin Schindler wrote:
Hello!
[…]
For our new setup (planned with CentOS 8, waiting for the official
repo for the latest dovecot
version…) we have a prototype
On 15 Feb 2020, at 19:04, Armin Schindler wrote:
The shared and public folders need of course the
anyone post
right to let fileinto work.
Or you have a special „list user“ which has the appropriate
permissions - depends all on the use case.
Now it works. Thank you Tobias.
Well done
On 14 Feb 2020, at 10:59, Peter wrote:
On 14/02/20 10:10 pm, Tobias Kirchhofer wrote:
would it be useful/advisable to use this repo for productive
operation?
An official repo is still not available for CentOS 8
https://repo.dovecot.org/
We would like to set up our new mail server
On 15 Feb 2020, at 12:27, Armin Schindler wrote:
On 15.02.2020 12:16, Tobias Kirchhofer wrote:
...
the sieve part seems to be very tricky.
My test is now working with a public folder and I have a
"sieve_before" script in place which works for rules of the
private
On 15 Feb 2020, at 10:43, Armin Schindler wrote:
On 14.02.2020 11:44, Tobias Kirchhofer wrote:
On 14 Feb 2020, at 11:06, Armin Schindler wrote:
...
The sorting in the according public folder happens in a global sieve
script before user scripts are fireing. It is combined
On 14 Feb 2020, at 15:02, Armin Schindler wrote:
On 2/14/20 2:23 PM, Tobias Kirchhofer wrote:
On 14 Feb 2020, at 14:05, Armin Schindler wrote:
On 2/14/20 11:44 AM, Tobias Kirchhofer wrote:
On 14 Feb 2020, at 11:06, Armin Schindler wrote:
Hello!
[…]
For our new setup (planned
; I you want you can try it.
>
> With best regards,
> Filip Bartmann
would it be useful/advisable to use this repo for productive operation?
An official repo is still not available for CentOS 8 https://repo.dovecot.org/
We would like to set up our new mail server on CentOS 8 and are waiting…
nice like it is with Cyrus. With Cyrus this
issue is less complex to implement.
Maybe this helps a bit. Take exclusivly one to two weeks for this task
and read and test a lot! :-)
Tobias
--
collect@shift.agency
On 1 Jun 2020, at 17:02, Peter wrote:
On 2/06/20 1:49 am, Aki Tuomi wrote:
we are still waiting for CentOS 8 Repo for current Dovecot version
from
here https://repo.dovecot.org/. Do you have an idea when it will
come?
Who does it maintain? Is it the Dovecot team?
Thanks,
Tobias
Yes, it's
for CentOS 8 Repo for current Dovecot version from
here https://repo.dovecot.org/. Do you have an idea when it will come?
Who does it maintain? Is it the Dovecot team?
Thanks,
Tobias
e the respectice script, so
that
USER.sieve is updated and THEN delete the script. Or to manually fix
USER.sieve on the server, which is surely not what's intended.
So the question is now: Is this a KMail bug, a Doveceot bug, or is the
server
misconfigured?!
Thanks for all help!
Cheers, Tobias
7:50 CEST schrieb dove...@ptld.com:
> > On 07-05-2021 1:04 pm, Tobias Leupold wrote:
> > There's no symlink pointing to that very script. I have virtual users,
> > so I
> > keep the respective sieve scripts in /srv/sieve/user@domain/.
> >
> > Such a directory
SER
#
require ["include"];
include :personal "some-script";
include :personal "some-other-script";
Am Montag, 5. Juli 2021, 18:46:30 CEST schrieb dove...@ptld.com:
> > On 07-05-2021 10:29 am, Tobias Leupold wrote:
> >
>
, or if Dovecot should remove
a script to delete from USER.sieve before deleting it. Or if I did something
wrong configuring Dovecot ;-)
Am Montag, 5. Juli 2021, 18:58:15 CEST schrieb Benny Pedersen:
> On 2021-07-05 16:29, Tobias Leupold wrote:
> > So the question is now: Is this a
> My educated guess is, yes this is a KMail issue.
Okay, thanks :-) I'll file a bug report there.
Am Montag, 5. Juli 2021, 21:30:54 CEST schrieb dove...@ptld.com:
> > On 07-05-2021 2:04 pm, Tobias Leupold wrote:
> >
> > When I delete a sieve script via the managesieve
SER
#
require ["include"];
include :personal "some-script";
include :personal "some-other-script";
Am Montag, 5. Juli 2021, 18:46:30 CEST schrieb dove...@ptld.com:
> > On 07-05-2021 10:29 am, Tobias Leupold wrote:
> >
> > So, to avoid this
:34 pm, Tobias Leupold wrote:
> >> Yes, that is the one im talking about: active-script.sieve
> >> Just remove that symlink and sieve will be disabled for that user and
> >> you shouldn't have any errors.
> >
> > Yeah, of course I won't -- but sieve filtering w
c:{SSHA512}_hash_::
info:{SSHA512}_hash_::
root:{SSHA512}_hash_::
Please correct me if i'm wrong or
point me to a workaround,
but i think the layout code needs some love. :-)
Best regards
Tobias
. :-)
I think there should be a default, which is valid
for a common deployment with all features working.
Maildir++ for sure is a great choice for this,
but the implementation has a flaw:
a hard-coded „separator‟, which collides with
the DNS label delimiter, when storing subscriptions.
Best Regards
To
- On Sep 3, 2021, at 10:06 AM, Aki Tuomi aki.tu...@open-xchange.com wrote:
>> On 03/09/2021 10:25 Tobias Oetiker wrote:
>>
>>
>> - On Sep 3, 2021, at 9:01 AM, Aki Tuomi aki.tu...@open-xchange.com wrote:
>>
>> >> On 03/09/2021 09:35 Tobias
Hi All,
I spent some quality time yesterday, tuning dovecot on a server which serves as
an imap-proxy in front of a zimbra setup
the imap proxy does ldap client-cert authentication and works well.
BUT
I found that the imap-login processes seem to gain 100 MB per connection they
are
- On Sep 3, 2021, at 9:01 AM, Aki Tuomi aki.tu...@open-xchange.com wrote:
>> On 03/09/2021 09:35 Tobias Oetiker wrote:
>>
>>
>> Hi All,
>>
>> I spent some quality time yesterday, tuning dovecot on a server which serves
>> as
>> an imap-pr
ng
function in
"subscription-file.c" ? :-D
Best regards
Tobias
--
Rockstable IT UG (haftungsbeschränkt)
Löhrstr. 19
04105 Leipzig
Sitz der Gesellschaft: Leipzig
Registergericht: Amtsgericht Leipzig, HRB 36289
Geschäftsführer: Tobias Stein
USt-IdNr.: DE324059204
https://www.rockstable.it/
Free Soft
Hi Aki!
> You can use $ENV:variable syntax with Dovecot v2.3.14+. The
environment variable needs to be listed in `import_environment` setting
and be available for dovecot process on startup.
Thank you for your answer. I will test it tomorrow.
I thought it was not supported because I
or less desirable from
the environment? Reading
https://doc.dovecot.org/configuration_manual/config_file/ I assume it's not.
Cheers,
Tobias Florek
Cheers,
Dovecot 2.3.4.1 (Debian stable) here, and the changelog does not offer
any hope of salvation, so a bug report it is.
The LDAP connections for userdb/passdb do not support SNI via TLS.
Simple construct to reproduce this:
0.) Have a.pem with SAN `foo.example.com`, b.pem with
1 - 100 of 124 matches
Mail list logo
