"Philip M. Roberts" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Anyone know a source for a replacement speaker for the MS-4. I have a good
MS-4 cabinet ,but the speaker has gone bad.
Thanks ,
Phil W8UV
"Ariel M. Elam" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Hello to the Drakelist:
Some time ago there was a member of the list looking for a fan for the
TR-7 or PS-7. Well, I have found some. They are USED. Al
Would like some easy directions on tuning up transmitter for transmission. I am new ham with technician liscence with code, manual not clear I do not want to melt down thwe rig on my first 10 meter QSO attempt. Any one in NYC area?
William
KC2JXN
Garey Barrell <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Jim -
Check the RV-3 "Jones" connector under the chassis. There should be a
jumper connected from Pin 2 to Pin 8. This wire has to be removed to
use t
"john" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
On 6 Mar 2005 at 12:59, K7RDX wrote:
> Check the resistive string for the plate voltage metering...Jim
S/B 17.6 meg, is 18.6 meg.
Sounds like it's time to
Garey Barrell <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
John -
First thing I'd do is verify that the plate voltage is really dropping,
not just the metering circuit. I think it's highly unlikely that THAT
"john" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
I'm just firing up a long dormant (and nearly new ) L7 for the first
time. I purchased it from the original owner who said it was used
only 6 hours before hi
Hi All;
I am selling a Drake R-4B that was not used in Years.
I brought it up on a variac & its playing and have listened to SSB station with only a short wire for antenna & bad conditions, Hi!
Anyway, it may need alignment or a cleaning of swiotches etc. but seems to work for the short time I had
"Dan Cotsirilos" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
I just got a c-line the, T-4XC that is doing something funny. it was working
great on LSB and 2 or 3 times the power would go way down and then come
I am in need of a Knob for the Drake SPR-4. It is the Mode
control knob.
Thanks in advance,
Kevin
[EMAIL PROTECTED]
10 matches
Mail list logo