Randy,
I hope you get some MUCH more informed answers than
mine, but to answer your question quickly "NO"!! Do not use
anything other than the high voltage wire and connectors you have already on the
Drake. It is designed to handle the voltage, while smaller wire and an RCA
connector wou
Hi all,
Somehow I broke the high voltage cable that comes out of the female plug of
the power supply and connects to the L7 amp. Its about 12 inches long encased in
a somewhat clear tube. I have had a L75 up to now that had a self-contained
power supply so this is new to me. It is inoperabl
The only switch contacts I saw was one wafer switch
right in front of the PBT housing. I did not see any obvious issue with
any of the components on the assembly surrounding the switch. I cleaned
that switch and the IF switch is scratch-free and positive now, but the loss of
signal in the
Hopefully, for your sake, the passband tuning unit is not in need of alignment. I doubt very much that bad caps are to blame for your troubles that is unless you can see that some or one of them has broken off a piece. However, there are switch contacts involved in the assembly so there is a possi
I spent some more
time with the R-4A last night. I carefully sprayed
DeOxit into the AF & RF gain pots, and the wafer switches; esp the
IF bandwidth switch. The rig does work better now. Things are better
now.
Unfortunately, the
IF bandwidth issue is still there. A signal that is S9 i
5 matches
Mail list logo