I have used both white paint and lacquer sticks. I prefer the paint myself.
Apply the paint, give it a minute or so to partially dry, then wipe off the
excess with a paper towel moistened with paint thinner or mineral spirits.
73, Gary___
Drakelist mai
Got a couple of the following question:
> What is the chemical version of white out?
The non-water based stuff. The water based stuff does not seem to hold up or
stick as well on the plastic knobs.
73,
Ron WD8SBB
--- On Wed, 10/19/11, Ron wrote:
> From: Ron
> Subject: Re: [Drakelist] Clean
Hey, - Pete -
I bought an R-4B and T-4XB from Bob. I was a fairly-early purchaser and was
somewhat disappointed because they were represented as an 8 out of 10. The
transmitters were represented as "maybe not working/untested". The transmitter
was so heavily modified that I consider it to b
On Wed, 19 Oct 2011 15:53:36 -0700 (PDT), Ron wrote:
>I use the "Chemical version" of white out. Basically paint it on, wipe
>excess, and then as it drys, use you fingernail to "clean up" any left over
>splashed or smeared edges.
I use Testors gloss white model paint, in the tiny glass bottle
Neil,
I use the "Chemical version" of white out. Basically paint it on, wipe excess,
and then as it drys, use you fingernail to "clean up" any left over splashed or
smeared edges. I have done this on some pretty dingy knobs, and they end up
looking great. My R4B line had it done in the early
good home needed for:
TR4C, AC4, MS4 station including Shure 444 communications mike.
In very good condition interior and exterior.
Ready to play.
$530.00 plus shipping
Please reply direct, thank you
72
Ron, wb1hga
___
Drakelist mailing list
Drake
The Drake equipment has been sold. Thanks to all for responding. The lucky
winner will remain anonymous because of the possibility of vendettas or
retaliatory air strikes. 8^)
--
73,
Dan - W7OIL
*=== = = = = === === === === = = = === === === = = = === = = **
*
In addition, before doing a lot of surgery you should check the input coil
"box" on the bottom of the amp and count the number of caps that are across the
coils and compare that to the number you see on the schematic of a export
version amp as those two 68pf caps MAY already be there. In my L7
Good day Group:
I have for sale a Drake TR7 with the PS7 power supply and all cables. The
TR7 has all four filters. I also have an R7A and a Shure 444 desk mike. All
are in excellent, practically brand new physical condition. The only problem
I can find with them is that The TR7 VFO scrolls on 20
10Meter%20Adaptation%20for%20Drake%20L7,%20Drake,%20tr4,%20tr7,%20drake%20radio,%20drake%20receiver,%20drake%20transceiver,%20ham%20radio%20equipment,%20ham%20radio%20receivers,%20radio%20equipment.webarchive___
Drakelist mailing list
Drakelist@zerobeat.n
Woody and Everyone,
There are four basic things that have to be done on an L7 to get it on 10
meters.
1. Bypass/remove the 10 meter filter board on the input circuit.
2. Remove the mechanical stop on the bandswitch; there are at least two, and
possibly more, ways in which Drake implemente
*Hello Everyone from a Very Cool "Heart of Dixie"*
* What has to be done to the L7 to get it to work on 10 Mtrs? Now before you
get too technical on me remember I'm Dumb as a Rock, so please explain in
lets say Electronics for Dummies mode.*
*Thanks *
*Woody*
--
* *
* If you forward this e-ma
12 matches
Mail list logo