I am sure that are at least a few folks who are using the TR7 with a power
supply other than the PS7. And I am thinking of those some are using linears.
So where and how did you gain access to the ALC line of the TR7?
TNX es 73,
Ron WD8SBB
___
LinkedIn
Dave Kaiser requested to add you as a connection on LinkedIn:
--
Phillip,
I'd like to add you to my professional network on LinkedIn.
- Dave
Accept invitation from Dave Kaiser
Ron -
Pin 9 of the PS-7 Control connector. The 10 Pin Jones connector. Pin 10 is
ground.
Some day when you're bored, you could go in and link Pin 9 over to that SPARE
phono jack just above it.
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service
Ron -
Oh, and the VOX relay contact is right next to it on Pin 8. A REAL relay contact too, none of this
wimpy reed relay stuff. :-)
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service Supplement CDs
www.k4oah.com
Ron wrote:
I am sure that are
You need a Cinch-Jones S-310 CCT plug and connect the shield of the
alc cable to pin 10. Connect the center to pin 9.
Plug into the matching 10 pin PS7 socket on the rear of the TR7.
73, Joe KC9LAD
At 07:41 AM 1/28/2012, you wrote:
I am sure that are at least a few folks who are using the TR7
Curious as to why the VOX and ALC come from the power supply rather than the
rig itself. I always thought that was a strange arrangement. Fortunately, I
have a stereo cable with color coded channels so it makes connection simple
but would be simpler to run shorter leads directly from the rig
On Sat, 28 Jan 2012 09:36:20 -0500, Garey Barrell wrote:
Oh, and the VOX relay contact is right next to it on Pin 8. A REAL relay
contact too, none of this
wimpy reed relay stuff. :-)
Or surface mount transistors.
73
-Jim
--
Ham Radio NU0C
Lincoln, Nebraska, U.S.S.A.
TR7/RV7/R7A/L7,
On Sat, 28 Jan 2012 10:32:36 -0500 (EST), K9sqg wrote:
Curious as to why the VOX and ALC come from the power supply rather than the
rig itself. I always thought that was a strange arrangement.
Perhaps they though the rear panel of the radio was getting too cluttered. More
puzzling/annoying to
Remember Jim, today's engineering staff (or should I say finance and marketing
engineering staff) is not to worry about your cost of ownership. They are
there to get the equipment sold at best profit margin possible and then
obsoleted so that you will buy another. It's all about cash flow.
Ron -
I'd be inclined to use the fixed 'line' AUDIO jack. The counter input can be handy, obviously as a
counter, but also as a good quick troubleshooting tool for the radio.
The other alternative of course is to get the proper connector, they are available, or use the
'spade' type power
Hi Jim:
Those Din types are really no harder to find than the multi-pin Jones
conn's !
:)
Curt
On 1/28/2012 11:01 AM, Jim Shorney wrote:
On Sat, 28 Jan 2012 10:32:36 -0500 (EST), K9sqg wrote:
Curious as to why the VOX and ALC come from the power supply rather than the
rig itself. I
On Sat, 28 Jan 2012 11:53:15 -0500, Garey Barrell wrote:
I'd be inclined to use the fixed 'line' AUDIO jack. The counter input can be
handy, obviously as a
counter, but also as a good quick troubleshooting tool for the radio.
Or just drill a hole for another RCA jack, or even a mini earphone
Yeah, I understand engineering to price points. On the smaller rigs, it's more
an issue of availabe real estate on the rear panel. Doesn't mean I have to LIKE
it... :)
73
-Jim
On Sat, 28 Jan 2012 08:31:30 -0800 (PST), Ron wrote:
Remember Jim, today's engineering staff (or should I say finance
Ron -
Yes, that is a good way to speed up the amp keying. A half mA shouldn't be a problem, those lines
are 'fused' very closely, but they should survive that! :-) Saves a whole ~25 mSec!!
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service
On Sat, 28 Jan 2012 13:08:15 -0500, Garey Barrell wrote:
A half mA shouldn't be a problem, those lines
are 'fused' very closely, but they should survive that! :-)
That's actually funny, because years ago I first heard tech calling transistors
three-legged fuses.
A corollary to Murphy's Law
Jim Shorney wrote:
On Sat, 28 Jan 2012 13:08:15 -0500, Garey Barrell wrote:
A half mA shouldn't be a problem, those lines
are 'fused' very closely, but they should survive that! :-)
That's actually funny, because years ago I first heard tech calling transistors
three-legged fuses.
A
On Sat, 28 Jan 2012 13:52:08 -0500, Garey Barrell wrote:
you can SEE a little
blue flash through the ceramic cap
Nice of them to design the device to contain the magic blue smoke, though.
73
-Jim
--
Ham Radio NU0C
Lincoln, Nebraska, U.S.S.A.
TR7/RV7/R7A/L7, TR6/RV6, T4XC/R4C/L4B, NCL2000,
Anyone have a source (and/or part number) for the on/off push button
switches controlling the C-4 Console Power?
Wayne
WB5FEX, Oklahoma City
-Original Message-
From: drakelist-boun...@zerobeat.net [mailto:drakelist-boun...@zerobeat.net]
On Behalf Of drakelist-requ...@zerobeat.net
Sent:
18 matches
Mail list logo