[drakelist] TR-7 DC power plug

2008-02-06 Thread DALE PARFITT
Are the Jones plugs available for running the TR-7 from a non PS-7 supply? This is the smaller of the 2 Jones plugs for portable op. Tnx, Dale W4OP

[Drakelist] UV-3 Schematic

2017-02-14 Thread Dale Parfitt
I have found a nice UV-3 whose 2M P.A. is bad. While I have an original owner's manual, and have found the service manual- neither has schematics or voltage charts. Does anyone on the list have the above in electronic format? Tnx, Dale W4OP ___

[Drakelist] Drake R-4C Problem

2017-10-10 Thread Dale Parfitt
I have a nice R-4C that has an issue I have never seen before. The AGC only functions in Slow mode. The AGC switch checks out as does the Function switch. A previous owner had jumbled the wires to the AGC switch (probably trying to fix the problem)- I am close to 100% sure they are now correct-

Re: [Drakelist] XLOCX-lock install in RV-7 & TR-7

2018-09-24 Thread Dale Parfitt
Hi Brad, Go to the Cumbria site- there is an example page of the X-Lock installed on different rigs. From memory, the Drake 7 line is there. Dale W4OP From: Drakelist [mailto:drakelist-boun...@zerobeat.net] On Behalf Of Brad Young Sent: Monday, September 24, 2018 8:02 AM To: drakelist@zer

Re: [Drakelist] XLOCX-lock install in RV-7 & TR-7

2018-09-24 Thread Dale Parfitt
Also see N6QW's article on the WB4HFN site: http://www.wb4hfn.com/DRAKE/DrakeArticles/TR7-Lock-3/TR7_X-Lock-3.htm Dale W4OP From: Drakelist [mailto:drakelist-boun...@zerobeat.net] On Behalf Of Dale Parfitt Sent: Monday, September 24, 2018 8:51 AM To: 'Brad Young'; drakeli

[Drakelist] Drake 1A

2018-09-30 Thread Dale Parfitt
I have a beautiful 1A that I am selling. After restoration, one of the nicest I have seen. Powder coated cabinet, polished aluminum front piece, modern grounded power cord. Has the calibrator, print of the manual. Any serious offers considered. http://www.parelectronics.com/vintage-drake-1a.ph

[Drakelist] R-4C Function swith with little detent Fix

2018-12-01 Thread Dale Parfitt
Does anyone have a Function switch on the Drake line with very little detent? I found an easy fix for mine (after going through the laborious task of actually replacing one). Dale W4OP ___ Drakelist mailing list Drakelist@zerobeat.net http://ma

Re: [Drakelist] VFO for 2NT

2019-12-06 Thread Dale Parfitt
If anyone is interested I have a nicely built DDS VFO for the Drake C line. I have only programmed the 80M offset but it can do all the bands. I used it for a couple of years until I bought my TR-7. Output level was raised to provide the correct levels for the RX and TX. The enclosure is ‘Dra